Subversion Repositories udp_ip_stack

--------------------------------------------------------------------------------
-- Company: 
-- Engineer:
--
-- Create Date:   16:53:03 06/10/2011
-- Design Name:   
-- Module Name:   C:/Users/pjf/Documents/projects/fpga/xilinx/Network/ip1/UDP_RX_tb.vhd
-- Project Name:  ip1
-- Target Device:  
-- Tool versions:  
-- Description:   
-- 
-- VHDL Test Bench Created by ISE for module: UDP_RX
-- 
-- Dependencies:
-- 
-- Revision:
-- Revision 0.01 - File Created
-- Additional Comments:
--
-- Notes: 
-- This testbench has been automatically generated using types std_logic and
-- std_logic_vector for the ports of the unit under test.  Xilinx recommends
-- that these types always be used for the top-level I/O of a design in order
-- to guarantee that the testbench will bind correctly to the post-implementation 
-- simulation model.
--------------------------------------------------------------------------------
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.NUMERIC_STD.ALL;
use work.axi.all;
use work.ipv4_types.all;
 
ENTITY UDP_RX_tb IS
END UDP_RX_tb;
 
ARCHITECTURE behavior OF UDP_RX_tb IS 
 
    -- Component Declaration for the Unit Under Test (UUT)
 
    COMPONENT UDP_RX
    PORT(
			-- UDP Layer signals
			udp_rxo					: inout udp_rx_type;
			udp_rx_start			: out std_logic;							-- indicates receipt of udp header
			-- system signals
			clk 						: in  STD_LOGIC;
			reset 					: in  STD_LOGIC;
			-- IP layer RX signals
			ip_rx_start				: in std_logic;								-- indicates receipt of ip header
			ip_rx						: inout ipv4_rx_type
        );
    END COMPONENT;
 
 
   --Inputs
   signal clk : std_logic := '0';
   signal reset : std_logic := '0';
   signal ip_rx_start : std_logic := '0';
 
	--BiDirs
   signal udp_rxo : udp_rx_type;
   signal ip_rx : ipv4_rx_type;
 
 	--Outputs
   signal udp_rx_start : std_logic;
 
   -- Clock period definitions
   constant clk_period : time := 8 ns;
 
BEGIN
 
	-- Instantiate the Unit Under Test (UUT)
   uut: UDP_RX PORT MAP (
          udp_rxo => udp_rxo,
          udp_rx_start => udp_rx_start,
          clk => clk,
          reset => reset,
          ip_rx_start => ip_rx_start,
          ip_rx => ip_rx
        );
 
   -- Clock process definitions
   clk_process :process
   begin
		clk <= '0';
		wait for clk_period/2;
		clk <= '1';
		wait for clk_period/2;
   end process;
 
 
   -- Stimulus process
   stim_proc: process
   begin		
      -- hold reset state for 100 ns.
      wait for 100 ns;
		ip_rx_start <= '0';
		ip_rx.data.data_in_valid <= '0';
      ip_rx.data.data_in_last <= '0';
		ip_rx.hdr.is_valid <= '0';
		ip_rx.hdr.protocol <= (others => '0');
		ip_rx.hdr.num_frame_errors <= (others => '0');
		ip_rx.hdr.last_error_code <= (others => '0');
		ip_rx.hdr.is_broadcast <= '0';
 
		reset <= '1';
      wait for clk_period*10;
		reset <= '0';
      wait for clk_period*5;
		reset <= '0';
 
		-- check reset conditions
		assert udp_rx_start = '0' 							report "udp_rx_start not initialised correctly on reset";
		assert udp_rxo.hdr.is_valid = '0'					report "udp_rxo.hdr.is_valid not initialised correctly on reset";
		assert udp_rxo.data.data_in = x"00"				report "udp_rxo.data.data_in not initialised correctly on reset";
		assert udp_rxo.data.data_in_valid = '0'			report "udp_rxo.data.data_in_valid not initialised correctly on reset";
		assert udp_rxo.data.data_in_last = '0'			report "udp_rxo.data.data_in_last not initialised correctly on reset";
 
      -- insert stimulus here 
 
		------------
		-- TEST 1 -- basic functional rx test with received ip pkt
		------------
 
		report "T1: Send an ip frame with IP src ip_address c0a80501, udp protocol from port x1498 to port x8724 and 3 bytes data";
 
		ip_rx_start <= '1';
		ip_rx.data.data_in_valid <= '0';
      ip_rx.data.data_in_last <= '0';
		ip_rx.hdr.is_valid <= '1';
		ip_rx.hdr.protocol <= x"11";	-- UDP
		ip_rx.hdr.data_length <= x"000b";
		ip_rx.hdr.src_ip_addr<= x"c0a80501";
		wait for clk_period*3;
		-- now send the data
		ip_rx.data.data_in_valid <= '1';
		ip_rx.data.data_in <= x"14"; wait for clk_period;	-- src port
		ip_rx.data.data_in <= x"98"; wait for clk_period;
		ip_rx.data.data_in <= x"87"; wait for clk_period;	-- dst port
		ip_rx.data.data_in <= x"24"; wait for clk_period;
		ip_rx.data.data_in <= x"00"; wait for clk_period;	-- len (hdr + data)
		ip_rx.data.data_in <= x"0b"; wait for clk_period;
		ip_rx.data.data_in <= x"00"; wait for clk_period;	-- mty cks
		ip_rx.data.data_in <= x"00"; wait for clk_period;
		-- udp hdr should be valid
		assert udp_rxo.hdr.is_valid = '1'					report "T1: udp_rxo.hdr.is_valid not set";
 
		ip_rx.data.data_in <= x"41"; wait for clk_period;	-- data
 
		assert udp_rxo.hdr.src_ip_addr = x"c0a80501"	report "T1: udp_rxo.hdr.src_ip_addr not set correctly";
		assert udp_rxo.hdr.src_port = x"1498"			report "T1: udp_rxo.hdr.src_port not set correctly";
		assert udp_rxo.hdr.dst_port = x"8724"			report "T1: udp_rxo.hdr.dst_port not set correctly";
		assert udp_rxo.hdr.data_length = x"0003"		report "T1: udp_rxo.hdr.data_length not set correctly";
		assert udp_rx_start = '1'							report "T1: udp_rx_start not set";
		assert udp_rxo.data.data_in_valid = '1'		report "T1: udp_rxo.data.data_in_valid not set";
 
		ip_rx.data.data_in <= x"45"; wait for clk_period;	-- data
		ip_rx.data.data_in <= x"49"; ip_rx.data.data_in_last <= '1'; wait for clk_period;
		assert udp_rxo.data.data_in_last = '1'			report "T1: udp_rxo.data.data_in_last not set";
		ip_rx_start <= '0';
		ip_rx.data.data_in_valid <= '0';
      ip_rx.data.data_in_last <= '0';
		ip_rx.hdr.is_valid <= '0';
		wait for clk_period;
		assert udp_rxo.data.data_in = x"00"				report "T1: udp_rxo.data.data_in not cleared";
		assert udp_rxo.data.data_in_valid = '0'			report "T1: udp_rxo.data.data_in_valid not cleared";
		assert udp_rxo.data.data_in_last = '0'			report "T1: udp_rxo.data.data_in_last not cleared";
 
		wait for clk_period;
 
		------------
		-- TEST 2 -- ability to receive 2nd ip pkt
		------------
 
		report "T2: Send an ip frame with IP src ip_address c0a80501, udp protocol from port x7623 to port x0365 and 5 bytes data";
 
		ip_rx_start <= '1';
		ip_rx.data.data_in_valid <= '0';
      ip_rx.data.data_in_last <= '0';
		ip_rx.hdr.is_valid <= '1';
		ip_rx.hdr.protocol <= x"11";	-- UDP
		ip_rx.hdr.data_length <= x"000b";
		ip_rx.hdr.src_ip_addr<= x"c0a80501";
		wait for clk_period*3;
		-- now send the data
		ip_rx.data.data_in_valid <= '1';
		ip_rx.data.data_in <= x"76"; wait for clk_period;	-- src port
		ip_rx.data.data_in <= x"23"; wait for clk_period;
		ip_rx.data.data_in <= x"03"; wait for clk_period;	-- dst port
		ip_rx.data.data_in <= x"65"; wait for clk_period;
		ip_rx.data.data_in <= x"00"; wait for clk_period;	-- len (hdr + data)
		ip_rx.data.data_in <= x"0d"; wait for clk_period;
		ip_rx.data.data_in <= x"00"; wait for clk_period;	-- mty cks
		ip_rx.data.data_in <= x"00"; wait for clk_period;
		-- udp hdr should be valid
		assert udp_rxo.hdr.is_valid = '1'					report "T2: udp_rxo.hdr.is_valid not set";
 
		ip_rx.data.data_in <= x"17"; wait for clk_period;	-- data
 
		assert udp_rxo.hdr.src_ip_addr = x"c0a80501"	report "T2: udp_rxo.hdr.src_ip_addr not set correctly";
		assert udp_rxo.hdr.src_port = x"7623"			report "T2: udp_rxo.hdr.src_port not set correctly";
		assert udp_rxo.hdr.dst_port = x"0365"			report "T2: udp_rxo.hdr.dst_port not set correctly";
		assert udp_rxo.hdr.data_length = x"0005"		report "T2: udp_rxo.hdr.data_length not set correctly";
		assert udp_rx_start = '1'							report "T2: udp_rx_start not set";
		assert udp_rxo.data.data_in_valid = '1'		report "T2: udp_rxo.data.data_in_valid not set";
 
		ip_rx.data.data_in <= x"37"; wait for clk_period;	-- data
		ip_rx.data.data_in <= x"57"; wait for clk_period;	-- data
		ip_rx.data.data_in <= x"73"; wait for clk_period;	-- data
		ip_rx.data.data_in <= x"f9"; ip_rx.data.data_in_last <= '1'; wait for clk_period;
		assert udp_rxo.data.data_in_last = '1'			report "T2: udp_rxo.data.data_in_last not set";
		ip_rx_start <= '0';
		ip_rx.data.data_in_valid <= '0';
      ip_rx.data.data_in_last <= '0';
		ip_rx.hdr.is_valid <= '0';
		wait for clk_period;
		assert udp_rxo.data.data_in = x"00"				report "T2: udp_rxo.data.data_in not cleared";
		assert udp_rxo.data.data_in_valid = '0'			report "T2: udp_rxo.data.data_in_valid not cleared";
		assert udp_rxo.data.data_in_last = '0'			report "T2: udp_rxo.data.data_in_last not cleared";
 
		------------
		-- TEST 3 -- ability to reject non-udp protocols
		------------
 
		report "T3: Send an ip frame with IP src ip_address c0a80501, protocol x12 from port x7623 to port x0365 and 5 bytes data";
 
		ip_rx_start <= '1';
		ip_rx.data.data_in_valid <= '0';
      ip_rx.data.data_in_last <= '0';
		ip_rx.hdr.is_valid <= '1';
		ip_rx.hdr.protocol <= x"12";	-- non-UDP
		ip_rx.hdr.data_length <= x"000b";
		ip_rx.hdr.src_ip_addr<= x"c0a80501";
		wait for clk_period*3;
		-- now send the data
		ip_rx.data.data_in_valid <= '1';
		ip_rx.data.data_in <= x"76"; wait for clk_period;	-- src port
		ip_rx.data.data_in <= x"23"; wait for clk_period;
		ip_rx.data.data_in <= x"03"; wait for clk_period;	-- dst port
		ip_rx.data.data_in <= x"65"; wait for clk_period;
		ip_rx.data.data_in <= x"00"; wait for clk_period;	-- len (hdr + data)
		ip_rx.data.data_in <= x"0d"; wait for clk_period;
		ip_rx.data.data_in <= x"00"; wait for clk_period;	-- mty cks
		ip_rx.data.data_in <= x"00"; wait for clk_period;
		-- udp hdr should be valid
		assert udp_rxo.hdr.is_valid = '0'					report "T3: udp_rxo.hdr.is_valid incorrectly set";
 
		ip_rx.data.data_in <= x"17"; wait for clk_period;	-- data
 
		assert udp_rx_start = '0'							report "T3: udp_rx_start incorrectly set";
		assert udp_rxo.data.data_in_valid = '0'		report "T3: udp_rxo.data.data_in_valid not set";
 
		ip_rx.data.data_in <= x"37"; wait for clk_period;	-- data
		ip_rx.data.data_in <= x"57"; wait for clk_period;	-- data
		ip_rx.data.data_in <= x"73"; wait for clk_period;	-- data
		ip_rx.data.data_in <= x"f9"; ip_rx.data.data_in_last <= '1'; wait for clk_period;
		assert udp_rxo.data.data_in_last = '0'			report "T3: udp_rxo.data.data_in_last incorrectly set";
		ip_rx_start <= '0';
		ip_rx.data.data_in_valid <= '0';
      ip_rx.data.data_in_last <= '0';
		ip_rx.hdr.is_valid <= '0';
		wait for clk_period;
		assert udp_rxo.data.data_in = x"00"				report "T3: udp_rxo.data.data_in not cleared";
		assert udp_rxo.data.data_in_valid = '0'			report "T3: udp_rxo.data.data_in_valid not cleared";
		assert udp_rxo.data.data_in_last = '0'			report "T3: udp_rxo.data.data_in_last not cleared";
 
		wait for clk_period;
 
		------------
		-- TEST 4 -- Ability to receive UDP pkt after non-UDP pkt
		------------
 
		report "T4: Send an ip frame with IP src ip_address c0a80501, udp protocol from port x1498 to port x8724 and 3 bytes data";
 
		ip_rx_start <= '1';
		ip_rx.data.data_in_valid <= '0';
      ip_rx.data.data_in_last <= '0';
		ip_rx.hdr.is_valid <= '1';
		ip_rx.hdr.protocol <= x"11";	-- UDP
		ip_rx.hdr.data_length <= x"000b";
		ip_rx.hdr.src_ip_addr<= x"c0a80501";
		wait for clk_period*3;
		-- now send the data
		ip_rx.data.data_in_valid <= '1';
		ip_rx.data.data_in <= x"14"; wait for clk_period;	-- src port
		ip_rx.data.data_in <= x"98"; wait for clk_period;
		ip_rx.data.data_in <= x"87"; wait for clk_period;	-- dst port
		ip_rx.data.data_in <= x"24"; wait for clk_period;
		ip_rx.data.data_in <= x"00"; wait for clk_period;	-- len (hdr + data)
		ip_rx.data.data_in <= x"0b"; wait for clk_period;
		ip_rx.data.data_in <= x"00"; wait for clk_period;	-- mty cks
		ip_rx.data.data_in <= x"00"; wait for clk_period;
		-- udp hdr should be valid
		assert udp_rxo.hdr.is_valid = '1'					report "T4: udp_rxo.hdr.is_valid not set";
 
		ip_rx.data.data_in <= x"41"; wait for clk_period;	-- data
 
		assert udp_rxo.hdr.src_ip_addr = x"c0a80501"	report "T4: udp_rxo.hdr.src_ip_addr not set correctly";
		assert udp_rxo.hdr.src_port = x"1498"			report "T4: udp_rxo.hdr.src_port not set correctly";
		assert udp_rxo.hdr.dst_port = x"8724"			report "T4: udp_rxo.hdr.dst_port not set correctly";
		assert udp_rxo.hdr.data_length = x"0003"		report "T4: udp_rxo.hdr.data_length not set correctly";
		assert udp_rx_start = '1'							report "T4: udp_rx_start not set";
		assert udp_rxo.data.data_in_valid = '1'		report "T4: udp_rxo.data.data_in_valid not set";
 
		ip_rx.data.data_in <= x"45"; wait for clk_period;	-- data
		ip_rx.data.data_in <= x"49"; ip_rx.data.data_in_last <= '1'; wait for clk_period;
		assert udp_rxo.data.data_in_last = '1'			report "T4: udp_rxo.data.data_in_last not set";
		ip_rx_start <= '0';
		ip_rx.data.data_in_valid <= '0';
      ip_rx.data.data_in_last <= '0';
		ip_rx.hdr.is_valid <= '0';
		wait for clk_period;
		assert udp_rxo.data.data_in = x"00"				report "T4: udp_rxo.data.data_in not cleared";
		assert udp_rxo.data.data_in_valid = '0'			report "T4: udp_rxo.data.data_in_valid not cleared";
		assert udp_rxo.data.data_in_last = '0'			report "T4: udp_rxo.data.data_in_last not cleared";
 
		wait for clk_period;
 
		report "--- end of tests ---";
 
		wait;
	end process;		
 
END;