Subversion Repositories udp_ip_stack

----------------------------------------------------------------------------------
-- Company: 
-- Engineer: 		Peter Fall
-- 
-- Create Date:    16:20:42 06/01/2011 
-- Design Name: 
-- Module Name:    IPv4 - Behavioral 
-- Project Name: 
-- Target Devices: 
-- Tool versions: 
-- Description: 
--		handle simple IP RX and TX
--		doesnt handle seg & reass
--		dest MAC addr resolution through ARP layer
--		Handle IPv4 protocol
--		Respond to ARP requests and replies
--		Ignore pkts that are not IP
--		Ignore pkts that are not addressed to us--
-- Dependencies: 
--
-- Revision: 
-- Revision 0.01 - File Created
-- Revision 0.02 - separated RX and TX clocks
-- Revision 0.03 - Added mac_data_out_first
-- Additional Comments: 
--
----------------------------------------------------------------------------------
LIBRARY ieee;
USE ieee.std_logic_1164.ALL;
use IEEE.NUMERIC_STD.ALL;
use work.axi.all;
use work.ipv4_types.all;
use work.arp_types.all;
 
entity IPv4 is
    Port (
			-- IP Layer signals
			ip_tx_start				: in std_logic;
			ip_tx						: in ipv4_tx_type;								-- IP tx cxns
			ip_tx_result			: out std_logic_vector (1 downto 0);		-- tx status (changes during transmission)
			ip_tx_data_out_ready	: out std_logic;									-- indicates IP TX is ready to take data
			ip_rx_start				: out std_logic;									-- indicates receipt of ip frame.
			ip_rx						: out ipv4_rx_type;
			-- system control signals
			rx_clk					: in  STD_LOGIC;
			tx_clk					: in  STD_LOGIC;
			reset 					: in  STD_LOGIC;
			our_ip_address 		: in STD_LOGIC_VECTOR (31 downto 0);
			our_mac_address 		: in std_logic_vector (47 downto 0);
			-- system status signals
			rx_pkt_count			: out STD_LOGIC_VECTOR(7 downto 0);			-- number of IP pkts received for us
			-- ARP lookup signals
			arp_req_req				: out arp_req_req_type;
			arp_req_rslt			: in arp_req_rslt_type;
			-- MAC layer RX signals
			mac_data_in 			: in  STD_LOGIC_VECTOR (7 downto 0);		-- ethernet frame (from dst mac addr through to last byte of frame)
			mac_data_in_valid 	: in  STD_LOGIC;									-- indicates data_in valid on clock
			mac_data_in_last 		: in  STD_LOGIC;									-- indicates last data in frame
			-- MAC layer TX signals
			mac_tx_req				: out std_logic;									-- indicates that ip wants access to channel (stays up for as long as tx)
			mac_tx_granted			: in std_logic;									-- indicates that access to channel has been granted		
			mac_data_out_ready	: in std_logic;									-- indicates system ready to consume data
			mac_data_out_valid	: out std_logic;									-- indicates data out is valid
			mac_data_out_first	: out std_logic;									-- with data out valid indicates the first byte of a frame
			mac_data_out_last		: out std_logic;									-- with data out valid indicates the last byte of a frame
			mac_data_out			: out std_logic_vector (7 downto 0)			-- ethernet frame (from dst mac addr through to last byte of frame)	 
			);
end IPv4;
 
architecture structural of IPv4 is
 
    COMPONENT IPv4_TX
    PORT(
			-- IP Layer signals
			ip_tx_start				: in std_logic;
			ip_tx						: in ipv4_tx_type;								-- IP tx cxns
			ip_tx_result			: out std_logic_vector (1 downto 0);		-- tx status (changes during transmission)
			ip_tx_data_out_ready	: out std_logic;									-- indicates IP TX is ready to take data
 
			-- system signals
			clk 						: in  STD_LOGIC;									-- same clock used to clock mac data and ip data
			reset 					: in  STD_LOGIC;
			our_ip_address 		: in STD_LOGIC_VECTOR (31 downto 0);
			our_mac_address 		: in std_logic_vector (47 downto 0);
			-- ARP lookup signals
			arp_req_req				: out arp_req_req_type;
			arp_req_rslt			: in arp_req_rslt_type;
			-- MAC layer TX signals
			mac_tx_req				: out std_logic;									-- indicates that ip wants access to channel (stays up for as long as tx)
			mac_tx_granted			: in std_logic;									-- indicates that access to channel has been granted		
			mac_data_out_ready	: in std_logic;									-- indicates system ready to consume data
			mac_data_out_valid	: out std_logic;								-- indicates data out is valid
			mac_data_out_first	: out std_logic;									-- with data out valid indicates the first byte of a frame
			mac_data_out_last		: out std_logic;									-- with data out valid indicates the last byte of a frame
			mac_data_out			: out std_logic_vector (7 downto 0)		-- ethernet frame (from dst mac addr through to last byte of frame)	 
        );
    END COMPONENT;
 
    COMPONENT IPv4_RX
    PORT(
			-- IP Layer signals
			ip_rx						: out ipv4_rx_type;
			ip_rx_start				: out std_logic;									-- indicates receipt of ip frame.
			-- system signals
			clk 						: in  STD_LOGIC;
			reset 					: in  STD_LOGIC;
			our_ip_address 		: in STD_LOGIC_VECTOR (31 downto 0);
			rx_pkt_count			: out STD_LOGIC_VECTOR(7 downto 0);			-- number of IP pkts received for us
			-- MAC layer RX signals
			mac_data_in 			: in  STD_LOGIC_VECTOR (7 downto 0);		-- ethernet frame (from dst mac addr through to last byte of frame)
			mac_data_in_valid 	: in  STD_LOGIC;									-- indicates data_in valid on clock
			mac_data_in_last 		: in  STD_LOGIC									-- indicates last data in frame
       );
    END COMPONENT;
 
begin
 
   TX : IPv4_TX PORT MAP (
          ip_tx_start 			=> ip_tx_start,
          ip_tx 					=> ip_tx,
          ip_tx_result			=> ip_tx_result,
          ip_tx_data_out_ready=> ip_tx_data_out_ready,
          clk 						=> tx_clk,
          reset 					=> reset,
          our_ip_address 		=> our_ip_address,
          our_mac_address 		=> our_mac_address,
          arp_req_req			=> arp_req_req,
          arp_req_rslt			=> arp_req_rslt,
          mac_tx_req 			=> mac_tx_req,
          mac_tx_granted 		=> mac_tx_granted,
          mac_data_out_ready 	=> mac_data_out_ready,
          mac_data_out_valid 	=> mac_data_out_valid,
          mac_data_out_first 	=> mac_data_out_first,
          mac_data_out_last 	=> mac_data_out_last,
          mac_data_out 			=> mac_data_out
        );
 
   RX : IPv4_RX PORT MAP (
          ip_rx 					=> ip_rx,
          ip_rx_start 			=> ip_rx_start,
          clk 						=> rx_clk,
          reset 					=> reset,
          our_ip_address 		=> our_ip_address,
			 rx_pkt_count			=> rx_pkt_count,
          mac_data_in 			=> mac_data_in,
          mac_data_in_valid 	=> mac_data_in_valid,
          mac_data_in_last 	=> mac_data_in_last
        );
 
 
end structural;