URL
https://opencores.org/ocsvn/usb2uart/usb2uart/trunk
Subversion Repositories usb2uart
[/] [usb2uart/] [trunk/] [rtl/] [usb1_core/] [usb1_utmi_if.v] - Rev 3
Go to most recent revision | Compare with Previous | Blame | View Log
///////////////////////////////////////////////////////////////////// //// //// //// UTMI Interface //// //// //// //// //// //// Author: Rudolf Usselmann //// //// rudi@asics.ws //// //// //// //// //// //// Downloaded from: http://www.opencores.org/cores/usb1_funct///// //// //// ///////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2000-2002 Rudolf Usselmann //// //// www.asics.ws //// //// rudi@asics.ws //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer.//// //// //// //// THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY //// //// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED //// //// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS //// //// FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE AUTHOR //// //// OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, //// //// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES //// //// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE //// //// GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR //// //// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF //// //// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT //// //// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT //// //// OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE //// //// POSSIBILITY OF SUCH DAMAGE. //// //// //// ///////////////////////////////////////////////////////////////////// // CVS Log // // $Id: usb1_utmi_if.v,v 1.1.1.1 2002-09-19 12:07:14 rudi Exp $ // // $Date: 2002-09-19 12:07:14 $ // $Revision: 1.1.1.1 $ // $Author: rudi $ // $Locker: $ // $State: Exp $ // // Change History: // $Log: not supported by cvs2svn $ // // // // // // // `include "usb1_defines.v" module usb1_utmi_if( // UTMI Interface (EXTERNAL) phy_clk, rst, DataOut, TxValid, TxReady, RxValid, RxActive, RxError, DataIn, // Internal Interface rx_data, rx_valid, rx_active, rx_err, tx_data, tx_valid, tx_valid_last, tx_ready, tx_first ); input phy_clk; input rst; output [7:0] DataOut; output TxValid; input TxReady; input [7:0] DataIn; input RxValid; input RxActive; input RxError; output [7:0] rx_data; output rx_valid, rx_active, rx_err; input [7:0] tx_data; input tx_valid; input tx_valid_last; output tx_ready; input tx_first; /////////////////////////////////////////////////////////////////// // // Local Wires and Registers // reg [7:0] rx_data; reg rx_valid, rx_active, rx_err; reg [7:0] DataOut; reg tx_ready; reg TxValid; /////////////////////////////////////////////////////////////////// // // Misc Logic // /////////////////////////////////////////////////////////////////// // // RX Interface Input registers // always @(posedge phy_clk or negedge rst) if(!rst) rx_valid <= #1 1'b0; else rx_valid <= #1 RxValid; always @(posedge phy_clk or negedge rst) if(!rst) rx_active <= #1 1'b0; else rx_active <= #1 RxActive; always @(posedge phy_clk or negedge rst) if(!rst) rx_err <= #1 1'b0; else rx_err <= #1 RxError; always @(posedge phy_clk) rx_data <= #1 DataIn; /////////////////////////////////////////////////////////////////// // // TX Interface Output/Input registers // always @(posedge phy_clk) if(TxReady | tx_first) DataOut <= #1 tx_data; always @(posedge phy_clk) tx_ready <= #1 TxReady; always @(posedge phy_clk or negedge rst) if(!rst) TxValid <= #1 1'b0; else TxValid <= #1 tx_valid | tx_valid_last | (TxValid & !TxReady); endmodule
Go to most recent revision | Compare with Previous | Blame | View Log