URL
https://opencores.org/ocsvn/usbhostslave/usbhostslave/trunk
Subversion Repositories usbhostslave
[/] [usbhostslave/] [trunk/] [RTL/] [slaveController/] [slaveDirectcontrol.v] - Rev 9
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// slaveDirectControl //// //// //// This file is part of the usbhostslave opencores effort. //// http://www.opencores.org/cores/usbhostslave/ //// //// //// //// Module Description: //// //// //// //// //// To Do: //// //// //// //// //// Author(s): //// //// - Steve Fielding, sfielding@base2designs.com //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2004 Steve Fielding and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // `timescale 1ns / 1ps `include "usbSerialInterfaceEngine_h.v" module slaveDirectControl (clk, directControlEn, directControlLineState, rst, SCTxPortCntl, SCTxPortData, SCTxPortGnt, SCTxPortRdy, SCTxPortReq, SCTxPortWEn); input clk; input directControlEn; input [1:0]directControlLineState; input rst; input SCTxPortGnt; input SCTxPortRdy; output [7:0]SCTxPortCntl; output [7:0]SCTxPortData; output SCTxPortReq; output SCTxPortWEn; wire clk; wire directControlEn; wire [1:0]directControlLineState; wire rst; reg [7:0]SCTxPortCntl, next_SCTxPortCntl; reg [7:0]SCTxPortData, next_SCTxPortData; wire SCTxPortGnt; wire SCTxPortRdy; reg SCTxPortReq, next_SCTxPortReq; reg SCTxPortWEn, next_SCTxPortWEn; // BINARY ENCODED state machine: slvDrctCntl // State codes definitions: `define START_SDC 3'b000 `define CHK_DRCT_CNTL 3'b001 `define DRCT_CNTL_WAIT_GNT 3'b010 `define DRCT_CNTL_CHK_LOOP 3'b011 `define DRCT_CNTL_WAIT_RDY 3'b100 `define IDLE_FIN 3'b101 `define IDLE_WAIT_GNT 3'b110 `define IDLE_WAIT_RDY 3'b111 reg [2:0]CurrState_slvDrctCntl, NextState_slvDrctCntl; // Diagram actions (continuous assignments allowed only: assign ...) // diagram ACTION // Machine: slvDrctCntl // NextState logic (combinatorial) always @ (directControlEn or SCTxPortGnt or SCTxPortRdy or directControlLineState or SCTxPortCntl or SCTxPortData or SCTxPortWEn or SCTxPortReq or CurrState_slvDrctCntl) begin NextState_slvDrctCntl <= CurrState_slvDrctCntl; // Set default values for outputs and signals next_SCTxPortCntl <= SCTxPortCntl; next_SCTxPortData <= SCTxPortData; next_SCTxPortWEn <= SCTxPortWEn; next_SCTxPortReq <= SCTxPortReq; case (CurrState_slvDrctCntl) // synopsys parallel_case full_case `START_SDC: begin NextState_slvDrctCntl <= `CHK_DRCT_CNTL; end `CHK_DRCT_CNTL: begin if (directControlEn == 1'b1) begin NextState_slvDrctCntl <= `DRCT_CNTL_WAIT_GNT; next_SCTxPortReq <= 1'b1; end else begin NextState_slvDrctCntl <= `IDLE_WAIT_GNT; next_SCTxPortReq <= 1'b1; end end `DRCT_CNTL_WAIT_GNT: begin if (SCTxPortGnt == 1'b1) begin NextState_slvDrctCntl <= `DRCT_CNTL_WAIT_RDY; end end `DRCT_CNTL_CHK_LOOP: begin next_SCTxPortWEn <= 1'b0; if (directControlEn == 1'b0) begin NextState_slvDrctCntl <= `CHK_DRCT_CNTL; next_SCTxPortReq <= 1'b0; end else begin NextState_slvDrctCntl <= `DRCT_CNTL_WAIT_RDY; end end `DRCT_CNTL_WAIT_RDY: begin if (SCTxPortRdy == 1'b1) begin NextState_slvDrctCntl <= `DRCT_CNTL_CHK_LOOP; next_SCTxPortWEn <= 1'b1; next_SCTxPortData <= {6'b000000, directControlLineState}; next_SCTxPortCntl <= `TX_DIRECT_CONTROL; end end `IDLE_FIN: begin next_SCTxPortWEn <= 1'b0; next_SCTxPortReq <= 1'b0; NextState_slvDrctCntl <= `CHK_DRCT_CNTL; end `IDLE_WAIT_GNT: begin if (SCTxPortGnt == 1'b1) begin NextState_slvDrctCntl <= `IDLE_WAIT_RDY; end end `IDLE_WAIT_RDY: begin if (SCTxPortRdy == 1'b1) begin NextState_slvDrctCntl <= `IDLE_FIN; next_SCTxPortWEn <= 1'b1; next_SCTxPortData <= 8'h00; next_SCTxPortCntl <= `TX_IDLE; end end endcase end // Current State Logic (sequential) always @ (posedge clk) begin if (rst) CurrState_slvDrctCntl <= `START_SDC; else CurrState_slvDrctCntl <= NextState_slvDrctCntl; end // Registered outputs logic always @ (posedge clk) begin if (rst) begin SCTxPortCntl <= 8'h00; SCTxPortData <= 8'h00; SCTxPortWEn <= 1'b0; SCTxPortReq <= 1'b0; end else begin SCTxPortCntl <= next_SCTxPortCntl; SCTxPortData <= next_SCTxPortData; SCTxPortWEn <= next_SCTxPortWEn; SCTxPortReq <= next_SCTxPortReq; end end endmodule
Go to most recent revision | Compare with Previous | Blame | View Log