URL
https://opencores.org/ocsvn/v586/v586/trunk
Subversion Repositories v586
[/] [v586/] [trunk/] [board_specific_files/] [nexys4/] [TOP_SYS.xdc] - Rev 121
Compare with Previous | Blame | View Log
##################################################################################### Generated by PlanAhead 14.7 built on 'Fri Sep 27 19:24:36 MDT 2013' by 'xbuild'######################################################################################################################################################################### Constraints from file : 'TOP_SYS.ucf'#####################################################################################Bank = 35, Pin name = IO_L12P_T1_MRCC_35, Sch name = CLK100MHZset_property PACKAGE_PIN E3 [get_ports clk100]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:1# The conversion of 'IOSTANDARD' constraint on 'net' object 'clk100' has been applied to the port object 'clk100'.set_property IOSTANDARD LVCMOS33 [get_ports clk100]# All timing constraint translations are rough conversions, intended to act as a template for further manual refinement. The translations should not be expected to produce semantically identical results to the original ucf. Each xdc timing constraint must be manually inspected and verified to ensure it captures the desired intent# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:3create_clock -period 10.000 -name clk100 [get_ports clk100]set_property PACKAGE_PIN C4 [get_ports RXD]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:5# The conversion of 'IOSTANDARD' constraint on 'net' object 'RXD' has been applied to the port object 'RXD'.set_property IOSTANDARD LVCMOS33 [get_ports RXD]set_property PACKAGE_PIN D4 [get_ports TXD]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:6# The conversion of 'IOSTANDARD' constraint on 'net' object 'TXD' has been applied to the port object 'TXD'.set_property IOSTANDARD LVCMOS33 [get_ports TXD]#NET "RXD_B" LOC = "V11" | IOSTANDARD = "LVCMOS33" ;#NET "TXD_B" LOC = "V15" | IOSTANDARD = "LVCMOS33" ;set_property PACKAGE_PIN C12 [get_ports rstn]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:12# The conversion of 'IOSTANDARD' constraint on 'net' object 'rstn' has been applied to the port object 'rstn'.set_property IOSTANDARD LVCMOS33 [get_ports rstn]#NET "RTS" LOC = "D3" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L12N_T1_MRCC_35, Sch name = UART_CTS#NET "CTS" LOC = "E5" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L5N_T0_AD13N_35, Sch name = UART_RTS## This file is a general .ucf for the Nexys4 rev B board## To use it in a project:## - uncomment the lines corresponding to used pins## - rename the used signals according to the project## Clock signal#NET "clk" LOC = "E3" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L12P_T1_MRCC_35, Sch name = CLK100MHZ#NET "clk" TNM_NET = sys_clk_pin;#TIMESPEC TS_sys_clk_pin = PERIOD sys_clk_pin 100 MHz HIGH 50%;## Switches#NET "sw<0>" LOC = "U9" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L21P_T3_DQS_34, Sch name = SW0#Bank = 34, Pin name = IO_25_34, Sch name = SW1set_property PACKAGE_PIN U8 [get_ports {gpio_in[0]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:29# The conversion of 'IOSTANDARD' constraint on 'net' object 'gpio_in[0]' has been applied to the port object 'gpio_in[0]'.set_property IOSTANDARD LVCMOS33 [get_ports {gpio_in[0]}]#Bank = 34, Pin name = IO_L23P_T3_34, Sch name = SW2set_property PACKAGE_PIN R7 [get_ports {gpio_in[1]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:30# The conversion of 'IOSTANDARD' constraint on 'net' object 'gpio_in[1]' has been applied to the port object 'gpio_in[1]'.set_property IOSTANDARD LVCMOS33 [get_ports {gpio_in[1]}]#Bank = 34, Pin name = IO_L19P_T3_34, Sch name = SW3set_property PACKAGE_PIN R6 [get_ports {gpio_in[2]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:31# The conversion of 'IOSTANDARD' constraint on 'net' object 'gpio_in[2]' has been applied to the port object 'gpio_in[2]'.set_property IOSTANDARD LVCMOS33 [get_ports {gpio_in[2]}]#Bank = 34, Pin name = IO_L19N_T3_VREF_34, Sch name = SW4set_property PACKAGE_PIN R5 [get_ports {gpio_in[3]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:32# The conversion of 'IOSTANDARD' constraint on 'net' object 'gpio_in[3]' has been applied to the port object 'gpio_in[3]'.set_property IOSTANDARD LVCMOS33 [get_ports {gpio_in[3]}]#Bank = 34, Pin name = IO_L20P_T3_34, Sch name = SW5set_property PACKAGE_PIN V7 [get_ports {gpio_in[4]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:33# The conversion of 'IOSTANDARD' constraint on 'net' object 'gpio_in[4]' has been applied to the port object 'gpio_in[4]'.set_property IOSTANDARD LVCMOS33 [get_ports {gpio_in[4]}]#Bank = 34, Pin name = IO_L20N_T3_34, Sch name = SW6set_property PACKAGE_PIN V6 [get_ports {gpio_in[5]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:34# The conversion of 'IOSTANDARD' constraint on 'net' object 'gpio_in[5]' has been applied to the port object 'gpio_in[5]'.set_property IOSTANDARD LVCMOS33 [get_ports {gpio_in[5]}]#Bank = 34, Pin name = IO_L10P_T1_34, Sch name = SW7set_property PACKAGE_PIN V5 [get_ports {gpio_in[6]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:35# The conversion of 'IOSTANDARD' constraint on 'net' object 'gpio_in[6]' has been applied to the port object 'gpio_in[6]'.set_property IOSTANDARD LVCMOS33 [get_ports {gpio_in[6]}]#NET "gpio_in<7>" LOC = "U4" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L8P_T1-34, Sch name = SW8#NET "sw<9>" LOC = "V2" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L9N_T1_DQS_34, Sch name = SW9#NET "sw<10>" LOC = "U2" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L9P_T1_DQS_34, Sch name = SW10#NET "sw<11>" LOC = "T3" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L11N_T1_MRCC_34, Sch name = SW11#NET "sw<12>" LOC = "T1" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L17N_T2_34, Sch name = SW12#NET "sw<13>" LOC = "R3" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L11P_T1_SRCC_34, Sch name = SW13#NET "sw<14>" LOC = "P3" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L14N_T2_SRCC_34, Sch name = SW14#Bank = 34, Pin name = IO_L14P_T2_SRCC_34, Sch name = SW15set_property PACKAGE_PIN P4 [get_ports {gpioA[0]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:43# The conversion of 'IOSTANDARD' constraint on 'net' object 'gpioA[0]' has been applied to the port object 'gpioA[0]'.set_property IOSTANDARD LVCMOS33 [get_ports {gpioA[0]}]## LEDs#NET "dbg1" LOC = "T8" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L24N_T3_34, Sch name = LED0#NET "dbg2" LOC = "V9" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L21N_T3_DQS_34, Sch name = LED1#NET "gpioA<2>" LOC = "R8" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L24P_T3_34, Sch name = LED2set_property PACKAGE_PIN R8 [get_ports {gpioA[1]}]set_property IOSTANDARD LVCMOS33 [get_ports {gpioA[1]}]#Bank = 34, Pin name = IO_L23N_T3_34, Sch name = LED3set_property PACKAGE_PIN T6 [get_ports {gpioA[3]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:49# The conversion of 'IOSTANDARD' constraint on 'net' object 'gpioA[3]' has been applied to the port object 'gpioA[3]'.set_property IOSTANDARD LVCMOS33 [get_ports {gpioA[3]}]#NET "gpioA<4>" LOC = "T5" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L12P_T1_MRCC_34, Sch name = LED4#Bank = 34, Pin name = IO_L12N_T1_MRCC_34, Sch name = LED5set_property PACKAGE_PIN T4 [get_ports {gpioA[5]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:51# The conversion of 'IOSTANDARD' constraint on 'net' object 'gpioA[5]' has been applied to the port object 'gpioA[5]'.set_property IOSTANDARD LVCMOS33 [get_ports {gpioA[5]}]#NET "gpioA<6>" LOC = "U7" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L22P_T3_34, Sch name = LED6#NET "gpioA<7>" LOC = "U6" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L22N_T3_34, Sch name = LED7#Bank = 34, Pin name = IO_L10N_T1_34, Sch name = LED8set_property PACKAGE_PIN V4 [get_ports {gpioB[0]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:54# The conversion of 'IOSTANDARD' constraint on 'net' object 'gpioB[0]' has been applied to the port object 'gpioB[0]'.set_property IOSTANDARD LVCMOS33 [get_ports {gpioB[0]}]#Bank = 34, Pin name = IO_L8N_T1_34, Sch name = LED9set_property PACKAGE_PIN U3 [get_ports {gpioB[1]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:55# The conversion of 'IOSTANDARD' constraint on 'net' object 'gpioB[1]' has been applied to the port object 'gpioB[1]'.set_property IOSTANDARD LVCMOS33 [get_ports {gpioB[1]}]#Bank = 34, Pin name = IO_L7N_T1_34, Sch name = LED10#NET "debug<4>" LOC = "R1" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L17P_T2_34, Sch name = LED11set_property PACKAGE_PIN V1 [get_ports {gpioB[2]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:56# The conversion of 'IOSTANDARD' constraint on 'net' object 'gpioB[2]' has been applied to the port object 'gpioB[2]'.set_property IOSTANDARD LVCMOS33 [get_ports {gpioB[2]}]#Bank = 34, Pin name = IO_L7N_T1_34, Sch name = LED10#NET "debug<4>" LOC = "R1" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L17P_T2_34, Sch name = LED11set_property PACKAGE_PIN R1 [get_ports {gpioB[3]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:57# The conversion of 'IOSTANDARD' constraint on 'net' object 'gpioB[3]' has been applied to the port object 'gpioB[3]'.set_property IOSTANDARD LVCMOS33 [get_ports {gpioB[3]}]#Bank = 34, Pin name = IO_L13N_T2_MRCC_34, Sch name = LED12set_property PACKAGE_PIN P5 [get_ports {gpioB[4]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:58# The conversion of 'IOSTANDARD' constraint on 'net' object 'gpioB[4]' has been applied to the port object 'gpioB[4]'.set_property IOSTANDARD LVCMOS33 [get_ports {gpioB[4]}]#Bank = 34, Pin name = IO_L7P_T1_34, Sch name = LED13set_property PACKAGE_PIN U1 [get_ports {gpioB[5]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:59# The conversion of 'IOSTANDARD' constraint on 'net' object 'gpioB[5]' has been applied to the port object 'gpioB[5]'.set_property IOSTANDARD LVCMOS33 [get_ports {gpioB[5]}]#Bank = 34, Pin name = IO_L15N_T2_DQS_34, Sch name = LED14set_property PACKAGE_PIN R2 [get_ports {gpioB[6]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:60# The conversion of 'IOSTANDARD' constraint on 'net' object 'gpioB[6]' has been applied to the port object 'gpioB[6]'.set_property IOSTANDARD LVCMOS33 [get_ports {gpioB[6]}]#Bank = 34, Pin name = IO_L15P_T2_DQS_34, Sch name = LED15set_property PACKAGE_PIN P2 [get_ports {gpioB[7]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:61# The conversion of 'IOSTANDARD' constraint on 'net' object 'gpioB[7]' has been applied to the port object 'gpioB[7]'.set_property IOSTANDARD LVCMOS33 [get_ports {gpioB[7]}]#NET "extA<0>" LOC = "K5" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L5P_T0_34, Sch name = LED16_R#NET "RGB1_Green" LOC = "F13" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L5P_T0_AD9P_15, Sch name = LED16_G#NET "RGB1_Blue" LOC = "F6" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L19N_T3_VREF_35, Sch name = LED16_B#NET "RGB2_Red" LOC = "K6" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_0_34, Sch name = LED17_R#NET "RGB2_Green" LOC = "H6" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_24P_T3_35, Sch name = LED17_G#NET "RGB2_Blue" LOC = "L16" | IOSTANDARD = "LVCMOS33"; #Bank = CONFIG, Pin name = IO_L3N_T0_DQS_EMCCLK_14, Sch name = LED17_B## 7 segment display#NET "seg<0>" LOC = "L3" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L2N_T0_34, Sch name = CA#NET "seg<1>" LOC = "N1" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L3N_T0_DQS_34, Sch name = CB#NET "seg<2>" LOC = "L5" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L6N_T0_VREF_34, Sch name = CC#NET "seg<3>" LOC = "L4" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L5N_T0_34, Sch name = CD#NET "seg<4>" LOC = "K3" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L2P_T0_34, Sch name = CE#NET "seg<5>" LOC = "M2" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L4N_T0_34, Sch name = CF#NET "seg<6>" LOC = "L6" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L6P_T0_34, Sch name = CG#NET "dp" LOC = "M4" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L16P_T2_34, Sch name = DP#NET "an<0>" LOC = "N6" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L18N_T2_34, Sch name = AN0#NET "an<1>" LOC = "M6" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L18P_T2_34, Sch name = AN1#NET "an<2>" LOC = "M3" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L4P_T0_34, Sch name = AN2#NET "an<3>" LOC = "N5" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L13_T2_MRCC_34, Sch name = AN3#NET "an<4>" LOC = "N2" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L3P_T0_DQS_34, Sch name = AN4#NET "an<5>" LOC = "N4" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L16N_T2_34, Sch name = AN5#NET "an<6>" LOC = "L1" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L1P_T0_34, Sch name = AN6#NET "an<7>" LOC = "M1" | IOSTANDARD = "LVCMOS33"; #Bank = 34, Pin name = IO_L1N_T034, Sch name = AN7## Buttons#NET "btnCpuReset" LOC = "C12" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L3P_T0_DQS_AD1P_15, Sch name = CPU_RESET#NET "btnC" LOC = "E16" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L11N_T1_SRCC_15, Sch name = BTNC#NET "btnU" LOC = "F15" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L14P_T2_SRCC_15, Sch name = BTNU#NET "btnL" LOC = "T16" | IOSTANDARD = "LVCMOS33"; #Bank = CONFIG, Pin name = IO_L15N_T2_DQS_DOUT_CSO_B_14, Sch name = BTNL#NET "btnR" LOC = "R10" | IOSTANDARD = "LVCMOS33"; #Bank = 14, Pin name = IO_25_14, Sch name = BTNR#NET "btnD" LOC = "V10" | IOSTANDARD = "LVCMOS33"; #Bank = 14, Pin name = IO_L21P_T3_DQS_14, Sch name = BTND## Pmod Header JA#Bank = 15, Pin name = IO_L1N_T0_AD0N_15, Sch name = JA1#set_property PACKAGE_PIN B13 [get_ports {gpioA[6]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:99# The conversion of 'IOSTANDARD' constraint on 'net' object 'gpioA[6]' has been applied to the port object 'gpioA[6]'.#set_property IOSTANDARD LVCMOS33 [get_ports {gpioA[6]}]#Bank = 15, Pin name = IO_L5N_T0_AD9N_15, Sch name = JA2#set_property PACKAGE_PIN F14 [get_ports {gpioA[4]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:100# The conversion of 'IOSTANDARD' constraint on 'net' object 'gpioA[4]' has been applied to the port object 'gpioA[4]'.#set_property IOSTANDARD LVCMOS33 [get_ports {gpioA[4]}]#Bank = 15, Pin name = IO_L16N_T2_A27_15, Sch name = JA3#set_property PACKAGE_PIN D17 [get_ports {gpioA[1]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:101# The conversion of 'IOSTANDARD' constraint on 'net' object 'gpioA[1]' has been applied to the port object 'gpioA[1]'.#set_property IOSTANDARD LVCMOS33 [get_ports {gpioA[1]}]#Bank = 15, Pin name = IO_L16P_T2_A28_15, Sch name = JA4#set_property PACKAGE_PIN E17 [get_ports {gpioA[2]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:102# The conversion of 'IOSTANDARD' constraint on 'net' object 'gpioA[2]' has been applied to the port object 'gpioA[2]'.#set_property IOSTANDARD LVCMOS33 [get_ports {gpioA[2]}]#NET "JA<4>" LOC = "G13" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_0_15, Sch name = JA7#NET "JA<5>" LOC = "C17" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L20N_T3_A19_15, Sch name = JA8#NET "JA<6>" LOC = "D18" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L21N_T3_A17_15, Sch name = JA9#NET "JA<7>" LOC = "E18" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L21P_T3_DQS_15, Sch name = JA10## Pmod Header JB#NET "JB<0>" LOC = "G14" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L15N_T2_DQS_ADV_B_15, Sch name = JB1#NET "JB<1>" LOC = "P15" | IOSTANDARD = "LVCMOS33"; #Bank = 14, Pin name = IO_L13P_T2_MRCC_14, Sch name = JB2#NET "JB<2>" LOC = "V11" | IOSTANDARD = "LVCMOS33"; #Bank = 14, Pin name = IO_L21N_T3_DQS_A06_D22_14, Sch name = JB3#NET "JB<3>" LOC = "V15" | IOSTANDARD = "LVCMOS33"; #Bank = CONFIG, Pin name = IO_L16P_T2_CSI_B_14, Sch name = JB4#NET "JB<4>" LOC = "K16" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_25_15, Sch name = JB7#NET "JB<5>" LOC = "R16" | IOSTANDARD = "LVCMOS33"; #Bank = CONFIG, Pin name = IO_L15P_T2_DQS_RWR_B_14, Sch name = JB8#NET "JB<6>" LOC = "T9" | IOSTANDARD = "LVCMOS33"; #Bank = 14, Pin name = IO_L24P_T3_A01_D17_14, Sch name = JB9#NET "JB<7>" LOC = "U11" | IOSTANDARD = "LVCMOS33"; #Bank = 14, Pin name = IO_L19N_T3_A09_D25_VREF_14, Sch name = JB10## Pmod Header JC#NET "JC<0>" LOC = "K2" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L23P_T3_35, Sch name = JC1#NET "JC<1>" LOC = "E7" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L6P_T0_35, Sch name = JC2#NET "JC<2>" LOC = "J3" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L22P_T3_35, Sch name = JC3#NET "JC<3>" LOC = "J4" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L21P_T3_DQS_35, Sch name = JC4#NET "JC<4>" LOC = "K1" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L23N_T3_35, Sch name = JC7#NET "JC<5>" LOC = "E6" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L5P_T0_AD13P_35, Sch name = JC8#NET "JC<6>" LOC = "J2" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L22N_T3_35, Sch name = JC9#NET "JC<7>" LOC = "G6" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L19P_T3_35, Sch name = JC10## Pmod Header JD#NET "JD<0>" LOC = "H4" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L21N_T2_DQS_35, Sch name = JD1#NET "JD<1>" LOC = "H1" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L17P_T2_35, Sch name = JD2#NET "JD<2>" LOC = "G1" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L17N_T2_35, Sch name = JD3#NET "JD<3>" LOC = "G3" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L20N_T3_35, Sch name = JD4#NET "JD<4>" LOC = "H2" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L15P_T2_DQS_35, Sch name = JD7#NET "JD<5>" LOC = "G4" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L20P_T3_35, Sch name = JD8#NET "JD<6>" LOC = "G2" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L15N_T2_DQS_35, Sch name = JD9#NET "JD<7>" LOC = "F3" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L13N_T2_MRCC_35, Sch name = JD10## Pmod Header JXADC#NET "JXADC<0>" LOC = "A13" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L9P_T1_DQS_AD3P_15, Sch name = XADC1_P -> XA1_P#NET "JXADC<1>" LOC = "A15" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L8P_T1_AD10P_15, Sch name = XADC2_P -> XA2_P#NET "JXADC<2>" LOC = "B16" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L7P_T1_AD2P_15, Sch name = XADC3_P -> XA3_P#NET "JXADC<3>" LOC = "B18" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L10P_T1_AD11P_15, Sch name = XADC4_P -> XA4_P#NET "JXADC<4>" LOC = "A14" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L9N_T1_DQS_AD3N_15, Sch name = XADC1_N -> XA1_N#NET "JXADC<5>" LOC = "A16" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L8N_T1_AD10N_15, Sch name = XADC2_N -> XA2_N#NET "JXADC<6>" LOC = "B17" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L7N_T1_AD2N_15, Sch name = XADC3_N -> XA3_N#NET "JXADC<7>" LOC = "A18" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L10N_T1_AD11N_15, Sch name = XADC4_N -> XA4_N## VGA Connector#NET "vgaRed<0>" LOC = "A3" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L8N_T1_AD14N_35, Sch name = VGA_R0#NET "vgaRed<1>" LOC = "B4" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L7N_T1_AD6N_35, Sch name = VGA_R1#NET "vgaRed<2>" LOC = "C5" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L1N_T0_AD4N_35, Sch name = VGA_R2#NET "vgaRed<3>" LOC = "A4" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L8P_T1_AD14P_35, Sch name = VGA_R3#NET "vgaBlue<0>" LOC = "B7" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L2P_T0_AD12P_35, Sch name = VGA_B0#NET "vgaBlue<1>" LOC = "C7" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L4N_T0_35, Sch name = VGA_B1#NET "vgaBlue<2>" LOC = "D7" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L6N_T0_VREF_35, Sch name = VGA_B2#NET "vgaBlue<3>" LOC = "D8" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L4P_T0_35, Sch name = VGA_B3#NET "vgaGreen<0>" LOC = "C6" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L1P_T0_AD4P_35, Sch name = VGA_G0#NET "vgaGreen<1>" LOC = "A5" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L3N_T0_DQS_AD5N_35, Sch name = VGA_G1#NET "vgaGreen<2>" LOC = "B6" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L2N_T0_AD12N_35, Sch name = VGA_G2#NET "vgaGreen<3>" LOC = "A6" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L3P_T0_DQS_AD5P_35, Sch name = VGA_G3#NET "Hsync" LOC = "B11" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L4P_T0_15, Sch name = VGA_HS#NET "Vsync" LOC = "B12" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L3N_T0_DQS_AD1N_15, Sch name = VGA_BVS## Micro SD Connector#NET "sdReset" LOC = "E2" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L14P_T2_SRCC_35, Sch name = SD_RESET#NET "sdCD" LOC = "A1" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L9N_T1_DQS_AD7N_35, Sch name = SD_CD#NET "sdSCK" LOC = "B1" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L9P_T1_DQS_AD7P_35, Sch name = SD_SCK#NET "sdCmd" LOC = "C1" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L16N_T2_35, Sch name = SD_CMD#NET "sdData<0>" LOC = "C2" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L16P_T2_35, Sch name = SD_DAT0#NET "sdData<1>" LOC = "E1" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L18N_T2_35, Sch name = SD_DAT1#NET "sdData<2>" LOC = "F1" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L18P_T2_35, Sch name = SD_DAT2#NET "sdData<3>" LOC = "D2" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L14N_T2_SRCC_35, Sch name = SD_DAT3#NET "sdReset" LOC = "E2" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L14P_T2_SRCC_35, Sch name = SD_RESET#NET "gpioA<1>" LOC = "F1" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L18P_T2_35, Sch name = SD_DAT2#NET "gpioA<2>" LOC = "E1" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L18N_T2_35, Sch name = SD_DAT1#NET "sdVdd" LOC = "C1" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L16N_T2_35, Sch name = SD_CMD#NET "gpioA<4>" LOC = "B1" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L9P_T1_DQS_AD7P_35, Sch name = SD_SCK#NET "sdVss" LOC = "D2" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L14N_T2_SRCC_35, Sch name = SD_DAT3#NET "gpioA<6>" LOC = "C2" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L16P_T2_35, Sch name = SD_DAT0#Bank = 35, Pin name = IO_L9N_T1_DQS_AD7N_35, Sch name = SD_CD#set_property PACKAGE_PIN A1 [get_ports {gpioA[7]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:181# The conversion of 'IOSTANDARD' constraint on 'net' object 'gpioA[7]' has been applied to the port object 'gpioA[7]'.#set_property IOSTANDARD LVCMOS33 [get_ports {gpioA[7]}]##Micro SD Connector##Bank = 35, Pin name = IO_L14P_T2_SRCC_35, Sch name = SD_RESETset_property PACKAGE_PIN E2 [get_ports {sdreset}]set_property IOSTANDARD LVCMOS33 [get_ports {sdreset}]##Bank = 35, Pin name = IO_L9N_T1_DQS_AD7N_35, Sch name = SD_CD#set_property PACKAGE_PIN A1 [get_ports {gpioA[2]}]#set_property IOSTANDARD LVCMOS33 [get_ports {gpioA[2]}]##Bank = 35, Pin name = IO_L9P_T1_DQS_AD7P_35, Sch name = SD_SCKset_property PACKAGE_PIN B1 [get_ports {gpioA[4]}]set_property IOSTANDARD LVCMOS33 [get_ports {gpioA[4]}]##Bank = 35, Pin name = IO_L16N_T2_35, Sch name = SD_CMDset_property PACKAGE_PIN C1 [get_ports {gpioA[6]}]set_property IOSTANDARD LVCMOS33 [get_ports {gpioA[6]}]##Bank = 35, Pin name = IO_L16P_T2_35, Sch name = SD_DAT0set_property PACKAGE_PIN C2 [get_ports {gpioA[7]}]set_property IOSTANDARD LVCMOS33 [get_ports {gpioA[7]}]##Bank = 35, Pin name = IO_L18N_T2_35, Sch name = SD_DAT1#set_property PACKAGE_PIN E1 [get_ports {sdData[1]}]#set_property IOSTANDARD LVCMOS33 [get_ports {sdData[1]}]##Bank = 35, Pin name = IO_L18P_T2_35, Sch name = SD_DAT2#set_property PACKAGE_PIN F1 [get_ports {sdData[2]}]#set_property IOSTANDARD LVCMOS33 [get_ports {sdData[2]}]##Bank = 35, Pin name = IO_L14N_T2_SRCC_35, Sch name = SD_DAT3set_property PACKAGE_PIN D2 [get_ports {gpioA[2]}]set_property IOSTANDARD LVCMOS33 [get_ports {gpioA[2]}]set_property PACKAGE_PIN D13 [get_ports {miso}]set_property IOSTANDARD LVCMOS33 [get_ports {miso}]set_property PACKAGE_PIN B14 [get_ports {mosi}]set_property IOSTANDARD LVCMOS33 [get_ports {mosi}]set_property PACKAGE_PIN D15 [get_ports {sclk}]set_property IOSTANDARD LVCMOS33 [get_ports {sclk}]set_property PACKAGE_PIN C15 [get_ports {acl_sel}]set_property IOSTANDARD LVCMOS33 [get_ports {acl_sel}]## Accelerometer#NET "aclMISO" LOC = "D13" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L6N_T0_VREF_15, Sch name = ACL_MISO#NET "aclMOSI" LOC = "B14" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L2N_T0_AD8N_15, Sch name = ACL_MOSI#NET "aclSCK" LOC = "D15" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L12P_T1_MRCC_15, Sch name = ACL_SCLK#NET "aclSS" LOC = "C15" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L12N_T1_MRCC_15, Sch name = ACL_CSN#NET "aclInt1" LOC = "C16" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L20P_T3_A20_15, Sch name = ACL_INT1#NET "aclInt2" LOC = "E15" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L11P_T1_SRCC_15, Sch name = ACL_INT2## Temperature Sensor#NET "tmpSCL" LOC = "F16" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L14N_T2_SRCC_15, Sch name = TMP_SCL#NET "tmpSDA" LOC = "G16" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L13N_T2_MRCC_15, Sch name = TMP_SDA#NET "tmpInt" LOC = "D14" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L1P_T0_AD0P_15, Sch name = TMP_INT#NET "tmpCT" LOC = "C14" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L1N_T0_AD0N_15, Sch name = TMP_CT## Omnidirectional Microphone#NET "micClk" LOC = "J5" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_25_35, Sch name = M_CLK#NET "micData" LOC = "H5" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L24N_T3_35, Sch name = M_DATA#NET "micLRSel" LOC = "F5" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_0_35, Sch name = M_LRSEL## PWM Audio Amplifier#NET "ampPWM" LOC = "A11" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L4N_T0_15, Sch name = AUD_PWM#NET "ampSD" LOC = "D12" | IOSTANDARD = "LVCMOS33"; #Bank = 15, Pin name = IO_L6P_T0_15, Sch name = AUD_SD## USB-RS232 Interface#NET "RsRx" LOC = "C4" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L7P_T1_AD6P_35, Sch name = UART_TXD_IN#NET "RsTx" LOC = "D4" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L11N_T1_SRCC_35, Sch name = UART_RXD_OUT#NET "RsCts" LOC = "D3" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L12N_T1_MRCC_35, Sch name = UART_CTS#NET "RsRts" LOC = "E5" | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L5N_T0_AD13N_35, Sch name = UART_RTS## USB HID (PS/2)#NET "PS2Clk" LOC = "F4" | PULLUP | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L13P_T2_MRCC_35, Sch name = PS2_CLK#NET "PS2Data" LOC = "B2" | PULLUP | IOSTANDARD = "LVCMOS33"; #Bank = 35, Pin name = IO_L10N_T1_AD15N_35, Sch name = PS2_DATA## SMSC Ethernet PHY##SMSC Ethernet PHY##Bank = 16, Pin name = IO_L11P_T1_SRCC_16, Sch name = ETH_MDCset_property PACKAGE_PIN C9 [get_ports PhyMdc]set_property IOSTANDARD LVCMOS33 [get_ports PhyMdc]##Bank = 16, Pin name = IO_L14N_T2_SRCC_16, Sch name = ETH_MDIOset_property PACKAGE_PIN A9 [get_ports PhyMdio]set_property IOSTANDARD LVCMOS33 [get_ports PhyMdio]##Bank = 35, Pin name = IO_L10P_T1_AD15P_35, Sch name = ETH_RSTNset_property PACKAGE_PIN B3 [get_ports PhyRstn]set_property IOSTANDARD LVCMOS33 [get_ports PhyRstn]##Bank = 16, Pin name = IO_L6N_T0_VREF_16, Sch name = ETH_CRSDVset_property PACKAGE_PIN D9 [get_ports PhyCrs]set_property IOSTANDARD LVCMOS33 [get_ports PhyCrs]##Bank = 16, Pin name = IO_L13N_T2_MRCC_16, Sch name = ETH_RXERRset_property PACKAGE_PIN C10 [get_ports PhyRxErr]set_property IOSTANDARD LVCMOS33 [get_ports PhyRxErr]##Bank = 16, Pin name = IO_L19N_T3_VREF_16, Sch name = ETH_RXD0set_property PACKAGE_PIN D10 [get_ports {PhyRxd[0]}]set_property IOSTANDARD LVCMOS33 [get_ports {PhyRxd[0]}]##Bank = 16, Pin name = IO_L13P_T2_MRCC_16, Sch name = ETH_RXD1set_property PACKAGE_PIN C11 [get_ports {PhyRxd[1]}]set_property IOSTANDARD LVCMOS33 [get_ports {PhyRxd[1]}]##Bank = 16, Pin name = IO_L11N_T1_SRCC_16, Sch name = ETH_TXENset_property PACKAGE_PIN B9 [get_ports PhyTxEn]set_property IOSTANDARD LVCMOS33 [get_ports PhyTxEn]##Bank = 16, Pin name = IO_L14P_T2_SRCC_16, Sch name = ETH_TXD0set_property PACKAGE_PIN A10 [get_ports {PhyTxd[0]}]set_property IOSTANDARD LVCMOS33 [get_ports {PhyTxd[0]}]##Bank = 16, Pin name = IO_L12N_T1_MRCC_16, Sch name = ETH_TXD1set_property PACKAGE_PIN A8 [get_ports {PhyTxd[1]}]set_property IOSTANDARD LVCMOS33 [get_ports {PhyTxd[1]}]##Bank = 35, Pin name = IO_L11P_T1_SRCC_35, Sch name = ETH_REFCLKset_property PACKAGE_PIN D5 [get_ports PhyClk50Mhz]set_property IOSTANDARD LVCMOS33 [get_ports PhyClk50Mhz]##Bank = 16, Pin name = IO_L12P_T1_MRCC_16, Sch name = ETH_INTNset_property PACKAGE_PIN B8 [get_ports PhyIntn]set_property IOSTANDARD LVCMOS33 [get_ports PhyIntn]## Quad SPI Flash#NET "sdclk" LOC = "E9" ; #Bank = CONFIG, Pin name = CCLK_0, Sch name = QSPI_SCK#Bank = CONFIG, Pin name = IO_L1P_T0_D00_MOSI_14, Sch name = QSPI_DQ0set_property PACKAGE_PIN K17 [get_ports sdout]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:234# The conversion of 'IOSTANDARD' constraint on 'net' object 'sdout' has been applied to the port object 'sdout'.set_property IOSTANDARD LVCMOS33 [get_ports sdout]#Bank = CONFIG, Pin name = IO_L1N_T0_D01_DIN_14, Sch name = QSPI_DQ1set_property PACKAGE_PIN K18 [get_ports sdin]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:235# The conversion of 'IOSTANDARD' constraint on 'net' object 'sdin' has been applied to the port object 'sdin'.set_property IOSTANDARD LVCMOS33 [get_ports sdin]#Bank = CONFIG, Pin name = IO_L20_T0_D02_14, Sch name = QSPI_DQ2set_property PACKAGE_PIN L14 [get_ports sdwp]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:236# The conversion of 'IOSTANDARD' constraint on 'net' object 'sdwp' has been applied to the port object 'sdwp'.set_property IOSTANDARD LVCMOS33 [get_ports sdwp]#Bank = CONFIG, Pin name = IO_L2P_T0_D03_14, Sch name = QSPI_DQ3set_property PACKAGE_PIN M14 [get_ports sdhld]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:237# The conversion of 'IOSTANDARD' constraint on 'net' object 'sdhld' has been applied to the port object 'sdhld'.set_property IOSTANDARD LVCMOS33 [get_ports sdhld]#Bank = CONFIG, Pin name = IO_L15N_T2_DQS_DOUT_CSO_B_14, Sch name = QSPI_CSNset_property PACKAGE_PIN L13 [get_ports sdcs]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:238# The conversion of 'IOSTANDARD' constraint on 'net' object 'sdcs' has been applied to the port object 'sdcs'.set_property IOSTANDARD LVCMOS33 [get_ports sdcs]## Cellular RAM#Bank = 14, Pin name = IO_L14N_T2_SRCC_14, Sch name = CRAM_CLK# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:241# The conversion of 'IOSTANDARD' constraint on 'net' object 'extCLK' has been applied to the port object 'extCLK'.set_property PACKAGE_PIN T15 [get_ports extCLK]set_property IOSTANDARD LVCMOS33 [get_ports extCLK]#Bank = 14, Pin name = IO_L23P_T3_A03_D19_14, Sch name = CRAM_ADVNset_property PACKAGE_PIN T13 [get_ports extADV]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:242# The conversion of 'IOSTANDARD' constraint on 'net' object 'extADV' has been applied to the port object 'extADV'.set_property IOSTANDARD LVCMOS33 [get_ports extADV]#Bank = 14, Pin name = IO_L4P_T0_D04_14, Sch name = CRAM_CENset_property PACKAGE_PIN L18 [get_ports extCSN]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:243# The conversion of 'IOSTANDARD' constraint on 'net' object 'extCSN' has been applied to the port object 'extCSN'.set_property IOSTANDARD LVCMOS33 [get_ports extCSN]#Bank = 15, Pin name = IO_L19P_T3_A22_15, Sch name = CRAM_CREset_property PACKAGE_PIN J14 [get_ports extCRE]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:244# The conversion of 'IOSTANDARD' constraint on 'net' object 'extCRE' has been applied to the port object 'extCRE'.set_property IOSTANDARD LVCMOS33 [get_ports extCRE]#Bank = 15, Pin name = IO_L15P_T2_DQS_15, Sch name = CRAM_OENset_property PACKAGE_PIN H14 [get_ports extOE]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:245# The conversion of 'IOSTANDARD' constraint on 'net' object 'extOE' has been applied to the port object 'extOE'.set_property IOSTANDARD LVCMOS33 [get_ports extOE]#Bank = 14, Pin name = IO_0_14, Sch name = CRAM_WENset_property PACKAGE_PIN R11 [get_ports extWEN]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:246# The conversion of 'IOSTANDARD' constraint on 'net' object 'extWEN' has been applied to the port object 'extWEN'.set_property IOSTANDARD LVCMOS33 [get_ports extWEN]#Bank = 15, Pin name = IO_L24N_T3_RS0_15, Sch name = CRAM_LBNset_property PACKAGE_PIN J15 [get_ports extLB]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:247# The conversion of 'IOSTANDARD' constraint on 'net' object 'extLB' has been applied to the port object 'extLB'.set_property IOSTANDARD LVCMOS33 [get_ports extLB]#Bank = 15, Pin name = IO_L17N_T2_A25_15, Sch name = CRAM_UBNset_property PACKAGE_PIN J13 [get_ports extUB]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:248# The conversion of 'IOSTANDARD' constraint on 'net' object 'extUB' has been applied to the port object 'extUB'.set_property IOSTANDARD LVCMOS33 [get_ports extUB]#Bank = 14, Pin name = IO_L14P_T2_SRCC_14, Sch name = CRAM_WAIT#set_property PACKAGE_PIN T14 [get_ports extWAIT]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:249# The conversion of 'IOSTANDARD' constraint on 'net' object 'extWAIT' has been applied to the port object 'extWAIT'.#set_property IOSTANDARD LVCMOS33 [get_ports extWAIT]#Bank = 14, Pin name = IO_L5P_T0_DQ06_14, Sch name = CRAM_DQ0set_property PACKAGE_PIN R12 [get_ports {extDB[0]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:251# The conversion of 'IOSTANDARD' constraint on 'net' object 'extDB[0]' has been applied to the port object 'extDB[0]'.set_property IOSTANDARD LVCMOS33 [get_ports {extDB[0]}]#Bank = 14, Pin name = IO_L19P_T3_A10_D26_14, Sch name = CRAM_DQ1set_property PACKAGE_PIN T11 [get_ports {extDB[1]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:252# The conversion of 'IOSTANDARD' constraint on 'net' object 'extDB[1]' has been applied to the port object 'extDB[1]'.set_property IOSTANDARD LVCMOS33 [get_ports {extDB[1]}]#Bank = 14, Pin name = IO_L20P_T3_A08)D24_14, Sch name = CRAM_DQ2set_property PACKAGE_PIN U12 [get_ports {extDB[2]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:253# The conversion of 'IOSTANDARD' constraint on 'net' object 'extDB[2]' has been applied to the port object 'extDB[2]'.set_property IOSTANDARD LVCMOS33 [get_ports {extDB[2]}]#Bank = 14, Pin name = IO_L5N_T0_D07_14, Sch name = CRAM_DQ3set_property PACKAGE_PIN R13 [get_ports {extDB[3]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:254# The conversion of 'IOSTANDARD' constraint on 'net' object 'extDB[3]' has been applied to the port object 'extDB[3]'.set_property IOSTANDARD LVCMOS33 [get_ports {extDB[3]}]#Bank = 14, Pin name = IO_L17N_T2_A13_D29_14, Sch name = CRAM_DQ4set_property PACKAGE_PIN U18 [get_ports {extDB[4]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:255# The conversion of 'IOSTANDARD' constraint on 'net' object 'extDB[4]' has been applied to the port object 'extDB[4]'.set_property IOSTANDARD LVCMOS33 [get_ports {extDB[4]}]#Bank = 14, Pin name = IO_L12N_T1_MRCC_14, Sch name = CRAM_DQ5set_property PACKAGE_PIN R17 [get_ports {extDB[5]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:256# The conversion of 'IOSTANDARD' constraint on 'net' object 'extDB[5]' has been applied to the port object 'extDB[5]'.set_property IOSTANDARD LVCMOS33 [get_ports {extDB[5]}]#Bank = 14, Pin name = IO_L7N_T1_D10_14, Sch name = CRAM_DQ6set_property PACKAGE_PIN T18 [get_ports {extDB[6]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:257# The conversion of 'IOSTANDARD' constraint on 'net' object 'extDB[6]' has been applied to the port object 'extDB[6]'.set_property IOSTANDARD LVCMOS33 [get_ports {extDB[6]}]#Bank = 14, Pin name = IO_L7P_T1_D09_14, Sch name = CRAM_DQ7set_property PACKAGE_PIN R18 [get_ports {extDB[7]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:258# The conversion of 'IOSTANDARD' constraint on 'net' object 'extDB[7]' has been applied to the port object 'extDB[7]'.set_property IOSTANDARD LVCMOS33 [get_ports {extDB[7]}]#Bank = 15, Pin name = IO_L22N_T3_A16_15, Sch name = CRAM_DQ8set_property PACKAGE_PIN F18 [get_ports {extDB[8]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:259# The conversion of 'IOSTANDARD' constraint on 'net' object 'extDB[8]' has been applied to the port object 'extDB[8]'.set_property IOSTANDARD LVCMOS33 [get_ports {extDB[8]}]#Bank = 15, Pin name = IO_L22P_T3_A17_15, Sch name = CRAM_DQ9set_property PACKAGE_PIN G18 [get_ports {extDB[9]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:260# The conversion of 'IOSTANDARD' constraint on 'net' object 'extDB[9]' has been applied to the port object 'extDB[9]'.set_property IOSTANDARD LVCMOS33 [get_ports {extDB[9]}]#Bank = 15, Pin name = IO_IO_L18N_T2_A23_15, Sch name = CRAM_DQ10set_property PACKAGE_PIN G17 [get_ports {extDB[10]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:261# The conversion of 'IOSTANDARD' constraint on 'net' object 'extDB[10]' has been applied to the port object 'extDB[10]'.set_property IOSTANDARD LVCMOS33 [get_ports {extDB[10]}]#Bank = 14, Pin name = IO_L4N_T0_D05_14, Sch name = CRAM_DQ11set_property PACKAGE_PIN M18 [get_ports {extDB[11]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:262# The conversion of 'IOSTANDARD' constraint on 'net' object 'extDB[11]' has been applied to the port object 'extDB[11]'.set_property IOSTANDARD LVCMOS33 [get_ports {extDB[11]}]#Bank = 14, Pin name = IO_L10N_T1_D15_14, Sch name = CRAM_DQ12set_property PACKAGE_PIN M17 [get_ports {extDB[12]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:263# The conversion of 'IOSTANDARD' constraint on 'net' object 'extDB[12]' has been applied to the port object 'extDB[12]'.set_property IOSTANDARD LVCMOS33 [get_ports {extDB[12]}]#Bank = 14, Pin name = IO_L9N_T1_DQS_D13_14, Sch name = CRAM_DQ13set_property PACKAGE_PIN P18 [get_ports {extDB[13]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:264# The conversion of 'IOSTANDARD' constraint on 'net' object 'extDB[13]' has been applied to the port object 'extDB[13]'.set_property IOSTANDARD LVCMOS33 [get_ports {extDB[13]}]#Bank = 14, Pin name = IO_L9P_T1_DQS_14, Sch name = CRAM_DQ14set_property PACKAGE_PIN N17 [get_ports {extDB[14]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:265# The conversion of 'IOSTANDARD' constraint on 'net' object 'extDB[14]' has been applied to the port object 'extDB[14]'.set_property IOSTANDARD LVCMOS33 [get_ports {extDB[14]}]#Bank = 14, Pin name = IO_L12P_T1_MRCC_14, Sch name = CRAM_DQ15set_property PACKAGE_PIN P17 [get_ports {extDB[15]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:266# The conversion of 'IOSTANDARD' constraint on 'net' object 'extDB[15]' has been applied to the port object 'extDB[15]'.set_property IOSTANDARD LVCMOS33 [get_ports {extDB[15]}]#Bank = 15, Pin name = IO_L23N_T3_FWE_B_15, Sch name = CRAM_A0set_property PACKAGE_PIN J18 [get_ports {extA[1]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:268# The conversion of 'IOSTANDARD' constraint on 'net' object 'extA[1]' has been applied to the port object 'extA[1]'.set_property IOSTANDARD LVCMOS33 [get_ports {extA[1]}]#Bank = 15, Pin name = IO_L18P_T2_A24_15, Sch name = CRAM_A1set_property PACKAGE_PIN H17 [get_ports {extA[2]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:269# The conversion of 'IOSTANDARD' constraint on 'net' object 'extA[2]' has been applied to the port object 'extA[2]'.set_property IOSTANDARD LVCMOS33 [get_ports {extA[2]}]#Bank = 15, Pin name = IO_L19N_T3_A21_VREF_15, Sch name = CRAM_A2set_property PACKAGE_PIN H15 [get_ports {extA[3]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:270# The conversion of 'IOSTANDARD' constraint on 'net' object 'extA[3]' has been applied to the port object 'extA[3]'.set_property IOSTANDARD LVCMOS33 [get_ports {extA[3]}]#Bank = 15, Pin name = IO_L23P_T3_FOE_B_15, Sch name = CRAM_A3set_property PACKAGE_PIN J17 [get_ports {extA[4]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:271# The conversion of 'IOSTANDARD' constraint on 'net' object 'extA[4]' has been applied to the port object 'extA[4]'.set_property IOSTANDARD LVCMOS33 [get_ports {extA[4]}]#Bank = 15, Pin name = IO_L13P_T2_MRCC_15, Sch name = CRAM_A4set_property PACKAGE_PIN H16 [get_ports {extA[5]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:272# The conversion of 'IOSTANDARD' constraint on 'net' object 'extA[5]' has been applied to the port object 'extA[5]'.set_property IOSTANDARD LVCMOS33 [get_ports {extA[5]}]#Bank = 15, Pin name = IO_L24P_T3_RS1_15, Sch name = CRAM_A5set_property PACKAGE_PIN K15 [get_ports {extA[6]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:273# The conversion of 'IOSTANDARD' constraint on 'net' object 'extA[6]' has been applied to the port object 'extA[6]'.set_property IOSTANDARD LVCMOS33 [get_ports {extA[6]}]#Bank = 15, Pin name = IO_L17P_T2_A26_15, Sch name = CRAM_A6set_property PACKAGE_PIN K13 [get_ports {extA[7]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:274# The conversion of 'IOSTANDARD' constraint on 'net' object 'extA[7]' has been applied to the port object 'extA[7]'.set_property IOSTANDARD LVCMOS33 [get_ports {extA[7]}]#Bank = 14, Pin name = IO_L11P_T1_SRCC_14, Sch name = CRAM_A7set_property PACKAGE_PIN N15 [get_ports {extA[8]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:275# The conversion of 'IOSTANDARD' constraint on 'net' object 'extA[8]' has been applied to the port object 'extA[8]'.set_property IOSTANDARD LVCMOS33 [get_ports {extA[8]}]#Bank = 14, Pin name = IO_L16N_T2_SRCC-14, Sch name = CRAM_A8set_property PACKAGE_PIN V16 [get_ports {extA[9]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:276# The conversion of 'IOSTANDARD' constraint on 'net' object 'extA[9]' has been applied to the port object 'extA[9]'.set_property IOSTANDARD LVCMOS33 [get_ports {extA[9]}]#Bank = 14, Pin name = IO_L22P_T3_A05_D21_14, Sch name = CRAM_A9set_property PACKAGE_PIN U14 [get_ports {extA[10]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:277# The conversion of 'IOSTANDARD' constraint on 'net' object 'extA[10]' has been applied to the port object 'extA[10]'.set_property IOSTANDARD LVCMOS33 [get_ports {extA[10]}]#Bank = 14, Pin name = IO_L22N_T3_A04_D20_14, Sch name = CRAM_A10set_property PACKAGE_PIN V14 [get_ports {extA[11]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:278# The conversion of 'IOSTANDARD' constraint on 'net' object 'extA[11]' has been applied to the port object 'extA[11]'.set_property IOSTANDARD LVCMOS33 [get_ports {extA[11]}]#Bank = 14, Pin name = IO_L20N_T3_A07_D23_14, Sch name = CRAM_A11set_property PACKAGE_PIN V12 [get_ports {extA[12]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:279# The conversion of 'IOSTANDARD' constraint on 'net' object 'extA[12]' has been applied to the port object 'extA[12]'.set_property IOSTANDARD LVCMOS33 [get_ports {extA[12]}]#Bank = 14, Pin name = IO_L8N_T1_D12_14, Sch name = CRAM_A12set_property PACKAGE_PIN P14 [get_ports {extA[13]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:280# The conversion of 'IOSTANDARD' constraint on 'net' object 'extA[13]' has been applied to the port object 'extA[13]'.set_property IOSTANDARD LVCMOS33 [get_ports {extA[13]}]#Bank = 14, Pin name = IO_L18P_T2_A12_D28_14, Sch name = CRAM_A13set_property PACKAGE_PIN U16 [get_ports {extA[14]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:281# The conversion of 'IOSTANDARD' constraint on 'net' object 'extA[14]' has been applied to the port object 'extA[14]'.set_property IOSTANDARD LVCMOS33 [get_ports {extA[14]}]#Bank = 14, Pin name = IO_L13N_T2_MRCC_14, Sch name = CRAM_A14set_property PACKAGE_PIN R15 [get_ports {extA[15]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:282# The conversion of 'IOSTANDARD' constraint on 'net' object 'extA[15]' has been applied to the port object 'extA[15]'.set_property IOSTANDARD LVCMOS33 [get_ports {extA[15]}]#Bank = 14, Pin name = IO_L8P_T1_D11_14, Sch name = CRAM_A15set_property PACKAGE_PIN N14 [get_ports {extA[16]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:283# The conversion of 'IOSTANDARD' constraint on 'net' object 'extA[16]' has been applied to the port object 'extA[16]'.set_property IOSTANDARD LVCMOS33 [get_ports {extA[16]}]#Bank = 14, Pin name = IO_L11N_T1_SRCC_14, Sch name = CRAM_A16set_property PACKAGE_PIN N16 [get_ports {extA[17]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:284# The conversion of 'IOSTANDARD' constraint on 'net' object 'extA[17]' has been applied to the port object 'extA[17]'.set_property IOSTANDARD LVCMOS33 [get_ports {extA[17]}]#Bank = 14, Pin name = IO_L6N_T0_D08_VREF_14, Sch name = CRAM_A17set_property PACKAGE_PIN M13 [get_ports {extA[18]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:285# The conversion of 'IOSTANDARD' constraint on 'net' object 'extA[18]' has been applied to the port object 'extA[18]'.set_property IOSTANDARD LVCMOS33 [get_ports {extA[18]}]#Bank = 14, Pin name = IO_L18N_T2_A11_D27_14, Sch name = CRAM_A18set_property PACKAGE_PIN V17 [get_ports {extA[19]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:286# The conversion of 'IOSTANDARD' constraint on 'net' object 'extA[19]' has been applied to the port object 'extA[19]'.set_property IOSTANDARD LVCMOS33 [get_ports {extA[19]}]#Bank = 14, Pin name = IO_L17P_T2_A14_D30_14, Sch name = CRAM_A19set_property PACKAGE_PIN U17 [get_ports {extA[20]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:287# The conversion of 'IOSTANDARD' constraint on 'net' object 'extA[20]' has been applied to the port object 'extA[20]'.set_property IOSTANDARD LVCMOS33 [get_ports {extA[20]}]#Bank = 14, Pin name = IO_L24N_T3_A00_D16_14, Sch name = CRAM_A20set_property PACKAGE_PIN T10 [get_ports {extA[21]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:288# The conversion of 'IOSTANDARD' constraint on 'net' object 'extA[21]' has been applied to the port object 'extA[21]'.set_property IOSTANDARD LVCMOS33 [get_ports {extA[21]}]#Bank = 14, Pin name = IO_L10P_T1_D14_14, Sch name = CRAM_A21set_property PACKAGE_PIN M16 [get_ports {extA[22]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:289# The conversion of 'IOSTANDARD' constraint on 'net' object 'extA[22]' has been applied to the port object 'extA[22]'.set_property IOSTANDARD LVCMOS33 [get_ports {extA[22]}]#Bank = 14, Pin name = IO_L23N_T3_A02_D18_14, Sch name = CRAM_A22set_property PACKAGE_PIN U13 [get_ports {extA[23]}]# /home/leo/cpu/vault.memo/v10.1/TOP_SYS.ucf:290# The conversion of 'IOSTANDARD' constraint on 'net' object 'extA[23]' has been applied to the port object 'extA[23]'.set_property IOSTANDARD LVCMOS33 [get_ports {extA[23]}]#create_pblock pblock_i_vliw#add_cells_to_pblock [get_pblocks pblock_i_vliw] [get_cells -quiet [list v586/ucore/i_vliw]]#resize_pblock [get_pblocks pblock_i_vliw] -add {CLOCKREGION_X1Y2:CLOCKREGION_X1Y3}#create_pblock pblock_i_deco#add_cells_to_pblock [get_pblocks pblock_i_deco] [get_cells -quiet [list v586/ucore/i_deco]]#resize_pblock [get_pblocks pblock_i_deco] -add {CLOCKREGION_X0Y3:CLOCKREGION_X1Y3}#create_pblock pblock_i_useq#add_cells_to_pblock [get_pblocks pblock_i_useq] [get_cells -quiet [list v586/ucore/i_useq]]#resize_pblock [get_pblocks pblock_i_useq] -add {CLOCKREGION_X1Y1:CLOCKREGION_X1Y1}#create_pblock pblock_ubiu#add_cells_to_pblock [get_pblocks pblock_ubiu] [get_cells -quiet [list v586/ubiu]]#resize_pblock [get_pblocks pblock_ubiu] -add {CLOCKREGION_X0Y1:CLOCKREGION_X0Y2}