URL
https://opencores.org/ocsvn/versatile_library/versatile_library/trunk
Subversion Repositories versatile_library
[/] [versatile_library/] [trunk/] [rtl/] [verilog/] [versatile_library.v] - Rev 99
Go to most recent revision | Compare with Previous | Blame | View Log
`ifndef BASE `define BASE vl_ `endif // default SYN_KEEP definition `define SYN_KEEP /*synthesis syn_keep = 1*/ `ifdef ACTEL `undef SYN_KEEP `define SYN_KEEP /*synthesis syn_keep = 1*/ `endif `ifdef ACTEL // ACTEL FPGA should not use logic to handle rw collision `define SYN_NO_RW_CHECK /*synthesis syn_ramstyle = "no_rw_check"*/ `else `define SYN_NO_RW_CHECK `endif `ifdef ALL `define GBUF `define SYNC_RST `define PLL `define MULTS `define MULTS18X18 `define MULT `define SHIFT_UNIT_32 `define LOGIC_UNIT `define CNT_SHREG_WRAP `define CNT_SHREG_CE_WRAP `define CNT_SHREG_CE_CLEAR `define CNT_SHREG_CE_CLEAR_WRAP `define MUX_ANDOR `define MUX2_ANDOR `define MUX3_ANDOR `define MUX4_ANDOR `define MUX5_ANDOR `define MUX6_ANDOR `define PARITY `define ROM_INIT `define RAM `define RAM_BE `define DPRAM_1R1W `define DPRAM_2R1W `define DPRAM_2R2W `define DPRAM_BE_2R2W `define FIFO_1R1W_FILL_LEVEL_SYNC `define FIFO_2R2W_SYNC_SIMPLEX `define FIFO_CMP_ASYNC `define FIFO_1R1W_ASYNC `define FIFO_2R2W_ASYNC `define FIFO_2R2W_ASYNC_SIMPLEX `define REG_FILE `define DFF `define DFF_ARRAY `define DFF_CE `define DFF_CE_CLEAR `define DF_CE_SET `define SPR `define SRP `define DFF_SR `define LATCH `define SHREG `define SHREG_CE `define DELAY `define DELAY_EMPTYFLAG `define PULSE2TOGGLE `define TOGGLE2PULSE `define SYNCHRONIZER `define CDC `define WB3AVALON_BRIDGE `define WB3WB3_BRIDGE `define WB3_ARBITER_TYPE1 `define WB_ADR_INC `define WB_B3_RAM_BE `define WB_B4_RAM_BE `define WB_B4_ROM `define WB_BOOT_ROM `define WB_DPRAM `define WBB3_WBB4_CACHE `define IO_DFF_OE `define O_DFF `endif `ifdef PLL `ifndef SYNC_RST `define SYNC_RST `endif `endif `ifdef SYNC_RST `ifndef GBUF `define GBUF `endif `endif `ifdef WB_B3_DPRAM `ifndef WB_ADR_INC `define WB_ADR_INC `endif `ifndef DPRAM_BE_2R2W `define DPRAM_BE_2R2W `endif `endif `ifdef WB_B3_RAM_BE `ifndef WB_ADR_INC `define WB_ADR_INC `endif `ifndef RAM_BE `define RAM_BE `endif `endif `ifdef WB3_ARBITER_TYPE1 `ifndef SPR `define SPR `endif `ifndef MUX_ANDOR `define MUX_ANDOR `endif `endif `ifdef WB3AVALON_BRIDGE `ifndef WB3WB3_BRIDGE `define WB3WB3_BRIDGE `endif `endif `ifdef WB3WB3_BRIDGE `ifndef CNT_SHREG_CE_CLEAR `define CNT_SHREG_CE_CLEAR `endif `ifndef DFF `define DFF `endif `ifndef DFF_CE `define DFF_CE `endif `ifndef CNT_SHREG_CE_CLEAR `define CNT_SHREG_CE_CLEAR `endif `ifndef FIFO_2R2W_ASYNC_SIMPLEX `define FIFO_2R2W_ASYNC_SIMPLEX `endif `endif `ifdef WBB3_WBB4_CACHE `ifndef RAM `define RAM `endif `ifndef WB_ADR_INC `define WB_ADR_INC `endif `ifndef dpram_be_2r2w `define DPRAM_BE_2R2W `endif `ifndef CDC `define CDC `endif `endif `ifdef MULTS18X18 `ifndef MULTS `define MULTS `endif `endif `ifdef SHIFT_UNIT_32 `ifndef MULTS `define MULTS `endif `endif `ifdef MUX2_ANDOR `ifndef MUX_ANDOR `define MUX_ANDOR `endif `endif `ifdef MUX3_ANDOR `ifndef MUX_ANDOR `define MUX_ANDOR `endif `endif `ifdef MUX4_ANDOR `ifndef MUX_ANDOR `define MUX_ANDOR `endif `endif `ifdef MUX5_ANDOR `ifndef MUX_ANDOR `define MUX_ANDOR `endif `endif `ifdef MUX6_ANDOR `ifndef MUX_ANDOR `define MUX_ANDOR `endif `endif `ifdef FIFO_1R1W_FILL_LEVEL_SYNC `ifndef CNT_BIN_CE `define CNT_BIN_CE `endif `ifndef DPRAM_1R1W `define DPRAM_1R1W `endif `ifndef CNT_BIN_CE_REW_Q_ZQ_L1 `define CNT_BIN_CE_REW_Q_ZQ_L1 `endif `endif `ifdef FIFO_1R1W_FILL_LEVEL_SYNC `ifndef CNT_LFSR_CE `define CNT_LFSR_CE `endif `ifndef DPRAM_2R2W `define DPRAM_2R2W `endif `ifndef CNT_BIN_CE_REW_ZQ_L1 `define CNT_BIN_CE_REW_ZQ_L1 `endif `endif `ifdef FIFO_2R2W_ASYNC_SIMPLEX `ifndef CNT_GRAY_CE_BIN `define CNT_GRAY_CE_BIN `endif `ifndef DPRAM_2R2W `define DPRAM_2R2W `endif `ifndef FIFO_CMP_ASYNC `define FIFO_CMP_ASYNC `endif `endif `ifdef FIFO_2R2W_ASYNC `ifndef FIFO_1R1W_ASYNC `define FIFO_1R1W_ASYNC `endif `endif `ifdef FIFO_1R1W_ASYNC `ifndef CNT_GRAY_CE_BIN `define CNT_GRAY_CE_BIN `endif `ifndef DPRAM_1R1W `define DPRAM_1R1W `endif `ifndef FIFO_CMP_ASYNC `define FIFO_CMP_ASYNC `endif `endif `ifdef FIFO_CMP_ASYNC `ifndef DFF_SR `define DFF_SR `endif `ifndef DFF `define DFF `endif `endif `ifdef REG_FILE `ifndef DPRAM_1R1W `define DPRAM_1R1W `endif `endif `ifdef CDC `ifndef PULSE2TOGGLE `define PULSE2TOGGLE `endif `ifndef TOGGLE2PULSE `define TOGGLE2PULSE `endif `ifndef SYNCHRONIZER `define SYNCHRONIZER `endif `endif // size to width `define SIZE2WIDTH_EXPR = (`SIZE2WIDTH==4) ? 2 : (`SIZE2WIDTH==8) ? 3 : (`SIZE2WIDTH==16) ? 4 : (`SIZE2WIDTH==32) ? 5 : (`SIZE2WIDTH==64) ? 6 : (`SIZE2WIDTH==128) ? 7 : 8; ////////////////////////////////////////////////////////////////////// //// //// //// Versatile library, clock and reset //// //// //// //// Description //// //// Logic related to clock and reset //// //// //// //// //// //// To Do: //// //// - add more different registers //// //// //// //// Author(s): //// //// - Michael Unneback, unneback@opencores.org //// //// ORSoC AB //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2010 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// `ifdef ACTEL `ifdef GBUF `timescale 1 ns/100 ps // Global buffer // usage: // use to enable global buffers for high fan out signals such as clock and reset // Version: 8.4 8.4.0.33 module gbuf(GL,CLK); output GL; input CLK; wire GND; GND GND_1_net(.Y(GND)); CLKDLY Inst1(.CLK(CLK), .GL(GL), .DLYGL0(GND), .DLYGL1(GND), .DLYGL2(GND), .DLYGL3(GND), .DLYGL4(GND)) /* synthesis black_box */; endmodule `timescale 1 ns/1 ns `define MODULE gbuf module `BASE`MODULE ( i, o); `undef MODULE input i; output o; `ifdef SIM_GBUF assign o=i; `else gbuf gbuf_i0 ( .CLK(i), .GL(o)); `endif endmodule `endif `else `ifdef ALTERA `ifdef GBUF //altera `define MODULE gbuf module `BASE`MODULE ( i, o); `undef MODULE input i; output o; assign o = i; endmodule `endif `else `ifdef GBUF `timescale 1 ns/100 ps `define MODULE module `BASE`MODULE ( i, o); `undef MODULE input i; output o; assign o = i; endmodule `endif `endif // ALTERA `endif //ACTEL `ifdef SYNC_RST // sync reset // input active lo async reset, normally from external reset generator and/or switch // output active high global reset sync with two DFFs `timescale 1 ns/100 ps `define MODULE sync_rst module `BASE`MODULE ( rst_n_i, rst_o, clk); `undef MODULE input rst_n_i, clk; output rst_o; reg [1:0] tmp; always @ (posedge clk or negedge rst_n_i) if (!rst_n_i) tmp <= 2'b11; else tmp <= {1'b0,tmp[1]}; `define MODULE gbuf `BASE`MODULE buf_i0( .i(tmp[0]), .o(rst_o)); `undef MODULE endmodule `endif `ifdef PLL // vl_pll `ifdef ACTEL /////////////////////////////////////////////////////////////////////////////// `timescale 1 ps/1 ps `define MODULE pll module `BASE`MODULE ( clk_i, rst_n_i, lock, clk_o, rst_o); `undef MODULE parameter index = 0; parameter number_of_clk = 1; parameter period_time_0 = 20000; parameter period_time_1 = 20000; parameter period_time_2 = 20000; parameter lock_delay = 2000000; input clk_i, rst_n_i; output lock; output reg [0:number_of_clk-1] clk_o; output [0:number_of_clk-1] rst_o; `ifdef SIM_PLL always #((period_time_0)/2) clk_o[0] <= (!rst_n_i) ? 0 : ~clk_o[0]; generate if (number_of_clk > 1) always #((period_time_1)/2) clk_o[1] <= (!rst_n_i) ? 0 : ~clk_o[1]; endgenerate generate if (number_of_clk > 2) always #((period_time_2)/2) clk_o[2] <= (!rst_n_i) ? 0 : ~clk_o[2]; endgenerate genvar i; generate for (i=0;i<number_of_clk;i=i+1) begin: clock vl_sync_rst rst_i0 ( .rst_n_i(rst_n_i | lock), .rst_o(rst_o[i]), .clk(clk_o[i])); end endgenerate assign #lock_delay lock = rst_n_i; endmodule `else generate if (number_of_clk==1 & index==0) begin pll0 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0])); end endgenerate // index==0 generate if (number_of_clk==1 & index==1) begin pll1 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0])); end endgenerate // index==1 generate if (number_of_clk==1 & index==2) begin pll2 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0])); end endgenerate // index==2 generate if (number_of_clk==1 & index==3) begin pll3 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0])); end endgenerate // index==0 generate if (number_of_clk==2 & index==0) begin pll0 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]), .GLB(clk_o[1])); end endgenerate // index==0 generate if (number_of_clk==2 & index==1) begin pll1 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]), .GLB(clk_o[1])); end endgenerate // index==1 generate if (number_of_clk==2 & index==2) begin pll2 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]), .GLB(clk_o[1])); end endgenerate // index==2 generate if (number_of_clk==2 & index==3) begin pll3 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]), .GLB(clk_o[1])); end endgenerate // index==0 generate if (number_of_clk==3 & index==0) begin pll0 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]), .GLB(clk_o[1]), .GLC(clk_o[2])); end endgenerate // index==0 generate if (number_of_clk==3 & index==1) begin pll1 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]), .GLB(clk_o[1]), .GLC(clk_o[2])); end endgenerate // index==1 generate if (number_of_clk==3 & index==2) begin pll2 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]), .GLB(clk_o[1]), .GLC(clk_o[2])); end endgenerate // index==2 generate if (number_of_clk==3 & index==3) begin pll3 pll_i0 (.POWERDOWN(1'b1), .CLKA(clk_i), .LOCK(lock), .GLA(clk_o[0]), .GLB(clk_o[1]), .GLC(clk_o[2])); end endgenerate // index==0 genvar i; generate for (i=0;i<number_of_clk;i=i+1) begin: clock `define MODULE sync_rst `BASE`MODULE rst_i0 ( .rst_n_i(rst_n_i | lock), .rst_o(rst_o), .clk(clk_o[i])); `undef MODULE end endgenerate endmodule `endif /////////////////////////////////////////////////////////////////////////////// `else /////////////////////////////////////////////////////////////////////////////// `ifdef ALTERA `timescale 1 ps/1 ps `define MODULE pll module `BASE`MODULE ( clk_i, rst_n_i, lock, clk_o, rst_o); `undef MODULE parameter index = 0; parameter number_of_clk = 1; parameter period_time_0 = 20000; parameter period_time_1 = 20000; parameter period_time_2 = 20000; parameter period_time_3 = 20000; parameter period_time_4 = 20000; parameter lock_delay = 2000000; input clk_i, rst_n_i; output lock; output reg [0:number_of_clk-1] clk_o; output [0:number_of_clk-1] rst_o; `ifdef SIM_PLL always #((period_time_0)/2) clk_o[0] <= (!rst_n_i) ? 0 : ~clk_o[0]; generate if (number_of_clk > 1) always #((period_time_1)/2) clk_o[1] <= (!rst_n_i) ? 0 : ~clk_o[1]; endgenerate generate if (number_of_clk > 2) always #((period_time_2)/2) clk_o[2] <= (!rst_n_i) ? 0 : ~clk_o[2]; endgenerate generate if (number_of_clk > 3) always #((period_time_3)/2) clk_o[3] <= (!rst_n_i) ? 0 : ~clk_o[3]; endgenerate generate if (number_of_clk > 4) always #((period_time_4)/2) clk_o[4] <= (!rst_n_i) ? 0 : ~clk_o[4]; endgenerate genvar i; generate for (i=0;i<number_of_clk;i=i+1) begin: clock vl_sync_rst rst_i0 ( .rst_n_i(rst_n_i | lock), .rst_o(rst_o[i]), .clk(clk_o[i])); end endgenerate //assign #lock_delay lock = rst_n_i; assign lock = rst_n_i; endmodule `else `ifdef VL_PLL0 `ifdef VL_PLL0_CLK1 pll0 pll0_i0 (.areset(rst_n_i), .inclk0(clk_i), .locked(lock), .c0(clk_o[0])); `endif `ifdef VL_PLL0_CLK2 pll0 pll0_i0 (.areset(rst_n_i), .inclk0(clk_i), .locked(lock), .c0(clk_o[0]), .c1(clk_o[1])); `endif `ifdef VL_PLL0_CLK3 pll0 pll0_i0 (.areset(rst_n_i), .inclk0(clk_i), .locked(lock), .c0(clk_o[0]), .c1(clk_o[1]), .c2(clk_o[2])); `endif `ifdef VL_PLL0_CLK4 pll0 pll0_i0 (.areset(rst_n_i), .inclk0(clk_i), .locked(lock), .c0(clk_o[0]), .c1(clk_o[1]), .c2(clk_o[2]), .c3(clk_o[3])); `endif `ifdef VL_PLL0_CLK5 pll0 pll0_i0 (.areset(rst_n_i), .inclk0(clk_i), .locked(lock), .c0(clk_o[0]), .c1(clk_o[1]), .c2(clk_o[2]), .c3(clk_o[3]), .c4(clk_o[4])); `endif `endif `ifdef VL_PLL1 `ifdef VL_PLL1_CLK1 pll1 pll1_i0 (.areset(rst_n_i), .inclk0(clk_i), .locked(lock), .c0(clk_o[0])); `endif `ifdef VL_PLL1_CLK2 pll1 pll1_i0 (.areset(rst_n_i), .inclk0(clk_i), .locked(lock), .c0(clk_o[0]), .c1(clk_o[1])); `endif `ifdef VL_PLL1_CLK3 pll1 pll1_i0 (.areset(rst_n_i), .inclk0(clk_i), .locked(lock), .c0(clk_o[0]), .c1(clk_o[1]), .c2(clk_o[2])); `endif `ifdef VL_PLL1_CLK4 pll1 pll1_i0 (.areset(rst_n_i), .inclk0(clk_i), .locked(lock), .c0(clk_o[0]), .c1(clk_o[1]), .c2(clk_o[2]), .c3(clk_o[3])); `endif `ifdef VL_PLL1_CLK5 pll1 pll1_i0 (.areset(rst_n_i), .inclk0(clk_i), .locked(lock), .c0(clk_o[0]), .c1(clk_o[1]), .c2(clk_o[2]), .c3(clk_o[3]), .c4(clk_o[4])); `endif `endif `ifdef VL_PLL2 `ifdef VL_PLL2_CLK1 pll2 pll2_i0 (.areset(rst_n_i), .inclk0(clk_i), .locked(lock), .c0(clk_o[0])); `endif `ifdef VL_PLL2_CLK2 pll2 pll2_i0 (.areset(rst_n_i), .inclk0(clk_i), .locked(lock), .c0(clk_o[0]), .c1(clk_o[1])); `endif `ifdef VL_PLL2_CLK3 pll2 pll2_i0 (.areset(rst_n_i), .inclk0(clk_i), .locked(lock), .c0(clk_o[0]), .c1(clk_o[1]), .c2(clk_o[2])); `endif `ifdef VL_PLL2_CLK4 pll2 pll2_i0 (.areset(rst_n_i), .inclk0(clk_i), .locked(lock), .c0(clk_o[0]), .c1(clk_o[1]), .c2(clk_o[2]), .c3(clk_o[3])); `endif `ifdef VL_PLL2_CLK5 pll2 pll2_i0 (.areset(rst_n_i), .inclk0(clk_i), .locked(lock), .c0(clk_o[0]), .c1(clk_o[1]), .c2(clk_o[2]), .c3(clk_o[3]), .c4(clk_o[4])); `endif `endif `ifdef VL_PLL3 `ifdef VL_PLL3_CLK1 pll3 pll3_i0 (.areset(rst_n_i), .inclk0(clk_i), .locked(lock), .c0(clk_o[0])); `endif `ifdef VL_PLL3_CLK2 pll3 pll3_i0 (.areset(rst_n_i), .inclk0(clk_i), .locked(lock), .c0(clk_o[0]), .c1(clk_o[1])); `endif `ifdef VL_PLL3_CLK3 pll3 pll3_i0 (.areset(rst_n_i), .inclk0(clk_i), .locked(lock), .c0(clk_o[0]), .c1(clk_o[1]), .c2(clk_o[2])); `endif `ifdef VL_PLL3_CLK4 pll3 pll3_i0 (.areset(rst_n_i), .inclk0(clk_i), .locked(lock), .c0(clk_o[0]), .c1(clk_o[1]), .c2(clk_o[2]), .c3(clk_o[3])); `endif `ifdef VL_PLL3_CLK5 pll3 pll3_i0 (.areset(rst_n_i), .inclk0(clk_i), .locked(lock), .c0(clk_o[0]), .c1(clk_o[1]), .c2(clk_o[2]), .c3(clk_o[3]), .c4(clk_o[4])); `endif `endif genvar i; generate for (i=0;i<number_of_clk;i=i+1) begin: clock `define MODULE sync_rst `BASE`MODULE rst_i0 ( .rst_n_i(rst_n_i | lock), .rst_o(rst_o[i]), .clk(clk_o[i])); `undef MODULE end endgenerate endmodule `endif /////////////////////////////////////////////////////////////////////////////// `else // generic PLL `timescale 1 ps/1 ps `define MODULE pll module `BASE`MODULE ( clk_i, rst_n_i, lock, clk_o, rst_o); `undef MODULE parameter index = 0; parameter number_of_clk = 1; parameter period_time_0 = 20000; parameter period_time_1 = 20000; parameter period_time_2 = 20000; parameter lock_delay = 2000; input clk_i, rst_n_i; output lock; output reg [0:number_of_clk-1] clk_o; output [0:number_of_clk-1] rst_o; always #((period_time_0)/2) clk_o[0] <= (!rst_n_i) ? 0 : ~clk_o[0]; generate if (number_of_clk > 1) always #((period_time_1)/2) clk_o[1] <= (!rst_n_i) ? 0 : ~clk_o[1]; endgenerate generate if (number_of_clk > 2) always #((period_time_2)/2) clk_o[2] <= (!rst_n_i) ? 0 : ~clk_o[2]; endgenerate genvar i; generate for (i=0;i<number_of_clk;i=i+1) begin: clock `define MODULE sync_rst `BASE`MODULE rst_i0 ( .rst_n_i(rst_n_i | lock), .rst_o(rst_o[i]), .clk(clk_o[i])); `undef MODULE end endgenerate assign #lock_delay lock = rst_n_i; endmodule `endif //altera `endif //actel `undef MODULE `endif////////////////////////////////////////////////////////////////////// //// //// //// Versatile library, registers //// //// //// //// Description //// //// Different type of registers //// //// //// //// //// //// To Do: //// //// - add more different registers //// //// //// //// Author(s): //// //// - Michael Unneback, unneback@opencores.org //// //// ORSoC AB //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2010 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// `ifdef DFF `define MODULE dff module `BASE`MODULE ( d, q, clk, rst); `undef MODULE parameter width = 1; parameter reset_value = 0; input [width-1:0] d; input clk, rst; output reg [width-1:0] q; always @ (posedge clk or posedge rst) if (rst) q <= reset_value; else q <= d; endmodule `endif `ifdef DFF_ARRAY `define MODULE dff_array module `BASE`MODULE ( d, q, clk, rst); `undef MODULE parameter width = 1; parameter depth = 2; parameter reset_value = 1'b0; input [width-1:0] d; input clk, rst; output [width-1:0] q; reg [0:depth-1] q_tmp [width-1:0]; integer i; always @ (posedge clk or posedge rst) if (rst) begin for (i=0;i<depth;i=i+1) q_tmp[i] <= {width{reset_value}}; end else begin q_tmp[0] <= d; for (i=1;i<depth;i=i+1) q_tmp[i] <= q_tmp[i-1]; end assign q = q_tmp[depth-1]; endmodule `endif `ifdef DFF_CE `define MODULE dff_ce module `BASE`MODULE ( d, ce, q, clk, rst); `undef MODULE parameter width = 1; parameter reset_value = 0; input [width-1:0] d; input ce, clk, rst; output reg [width-1:0] q; always @ (posedge clk or posedge rst) if (rst) q <= reset_value; else if (ce) q <= d; endmodule `endif `ifdef DFF_CE_CLEAR `define MODULE dff_ce_clear module `BASE`MODULE ( d, ce, clear, q, clk, rst); `undef MODULE parameter width = 1; parameter reset_value = 0; input [width-1:0] d; input ce, clear, clk, rst; output reg [width-1:0] q; always @ (posedge clk or posedge rst) if (rst) q <= reset_value; else if (ce) if (clear) q <= {width{1'b0}}; else q <= d; endmodule `endif `ifdef DF_CE_SET `define MODULE dff_ce_set module `BASE`MODULE ( d, ce, set, q, clk, rst); `undef MODULE parameter width = 1; parameter reset_value = 0; input [width-1:0] d; input ce, set, clk, rst; output reg [width-1:0] q; always @ (posedge clk or posedge rst) if (rst) q <= reset_value; else if (ce) if (set) q <= {width{1'b1}}; else q <= d; endmodule `endif `ifdef SPR `define MODULE spr module `BASE`MODULE ( sp, r, q, clk, rst); `undef MODULE //parameter width = 1; parameter reset_value = 1'b0; input sp, r; output reg q; input clk, rst; always @ (posedge clk or posedge rst) if (rst) q <= reset_value; else if (sp) q <= 1'b1; else if (r) q <= 1'b0; endmodule `endif `ifdef SRP `define MODULE srp module `BASE`MODULE ( s, rp, q, clk, rst); `undef MODULE parameter width = 1; parameter reset_value = 0; input s, rp; output reg q; input clk, rst; always @ (posedge clk or posedge rst) if (rst) q <= reset_value; else if (rp) q <= 1'b0; else if (s) q <= 1'b1; endmodule `endif `ifdef ALTERA `ifdef DFF_SR // megafunction wizard: %LPM_FF% // GENERATION: STANDARD // VERSION: WM1.0 // MODULE: lpm_ff // ============================================================ // File Name: dff_sr.v // Megafunction Name(s): // lpm_ff // // Simulation Library Files(s): // lpm // ============================================================ // ************************************************************ // THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE! // // 9.1 Build 304 01/25/2010 SP 1 SJ Full Version // ************************************************************ //Copyright (C) 1991-2010 Altera Corporation //Your use of Altera Corporation's design tools, logic functions //and other software and tools, and its AMPP partner logic //functions, and any output files from any of the foregoing //(including device programming or simulation files), and any //associated documentation or information are expressly subject //to the terms and conditions of the Altera Program License //Subscription Agreement, Altera MegaCore Function License //Agreement, or other applicable license agreement, including, //without limitation, that your use is for the sole purpose of //programming logic devices manufactured by Altera and sold by //Altera or its authorized distributors. Please refer to the //applicable agreement for further details. // synopsys translate_off `timescale 1 ps / 1 ps // synopsys translate_on `define MODULE dff_sr module `BASE`MODULE ( `undef MODULE aclr, aset, clock, data, q); input aclr; input aset; input clock; input data; output q; wire [0:0] sub_wire0; wire [0:0] sub_wire1 = sub_wire0[0:0]; wire q = sub_wire1; wire sub_wire2 = data; wire sub_wire3 = sub_wire2; lpm_ff lpm_ff_component ( .aclr (aclr), .clock (clock), .data (sub_wire3), .aset (aset), .q (sub_wire0) // synopsys translate_off , .aload (), .enable (), .sclr (), .sload (), .sset () // synopsys translate_on ); defparam lpm_ff_component.lpm_fftype = "DFF", lpm_ff_component.lpm_type = "LPM_FF", lpm_ff_component.lpm_width = 1; endmodule // ============================================================ // CNX file retrieval info // ============================================================ // Retrieval info: PRIVATE: ACLR NUMERIC "1" // Retrieval info: PRIVATE: ALOAD NUMERIC "0" // Retrieval info: PRIVATE: ASET NUMERIC "1" // Retrieval info: PRIVATE: ASET_ALL1 NUMERIC "1" // Retrieval info: PRIVATE: CLK_EN NUMERIC "0" // Retrieval info: PRIVATE: DFF NUMERIC "1" // Retrieval info: PRIVATE: INTENDED_DEVICE_FAMILY STRING "Cyclone IV E" // Retrieval info: PRIVATE: SCLR NUMERIC "0" // Retrieval info: PRIVATE: SLOAD NUMERIC "0" // Retrieval info: PRIVATE: SSET NUMERIC "0" // Retrieval info: PRIVATE: SSET_ALL1 NUMERIC "1" // Retrieval info: PRIVATE: SYNTH_WRAPPER_GEN_POSTFIX STRING "0" // Retrieval info: PRIVATE: UseTFFdataPort NUMERIC "0" // Retrieval info: PRIVATE: nBit NUMERIC "1" // Retrieval info: CONSTANT: LPM_FFTYPE STRING "DFF" // Retrieval info: CONSTANT: LPM_TYPE STRING "LPM_FF" // Retrieval info: CONSTANT: LPM_WIDTH NUMERIC "1" // Retrieval info: USED_PORT: aclr 0 0 0 0 INPUT NODEFVAL aclr // Retrieval info: USED_PORT: aset 0 0 0 0 INPUT NODEFVAL aset // Retrieval info: USED_PORT: clock 0 0 0 0 INPUT NODEFVAL clock // Retrieval info: USED_PORT: data 0 0 0 0 INPUT NODEFVAL data // Retrieval info: USED_PORT: q 0 0 0 0 OUTPUT NODEFVAL q // Retrieval info: CONNECT: @clock 0 0 0 0 clock 0 0 0 0 // Retrieval info: CONNECT: q 0 0 0 0 @q 0 0 1 0 // Retrieval info: CONNECT: @aclr 0 0 0 0 aclr 0 0 0 0 // Retrieval info: CONNECT: @aset 0 0 0 0 aset 0 0 0 0 // Retrieval info: CONNECT: @data 0 0 1 0 data 0 0 0 0 // Retrieval info: LIBRARY: lpm lpm.lpm_components.all // Retrieval info: GEN_FILE: TYPE_NORMAL dff_sr.v TRUE // Retrieval info: GEN_FILE: TYPE_NORMAL dff_sr.inc FALSE // Retrieval info: GEN_FILE: TYPE_NORMAL dff_sr.cmp FALSE // Retrieval info: GEN_FILE: TYPE_NORMAL dff_sr.bsf FALSE // Retrieval info: GEN_FILE: TYPE_NORMAL dff_sr_inst.v FALSE // Retrieval info: GEN_FILE: TYPE_NORMAL dff_sr_bb.v FALSE // Retrieval info: LIB_FILE: lpm `endif `else `ifdef DFF_SR `define MODULE dff_sr module `BASE`MODULE ( aclr, aset, clock, data, q); `undef MODULE input aclr; input aset; input clock; input data; output reg q; always @ (posedge clock or posedge aclr or posedge aset) if (aclr) q <= 1'b0; else if (aset) q <= 1'b1; else q <= data; endmodule `endif `endif // LATCH // For targtes not supporting LATCH use dff_sr with clk=1 and data=1 `ifdef ALTERA `ifdef LATCH `define MODULE latch module `BASE`MODULE ( d, le, q, clk); `undef MODULE input d, le; output q; input clk; dff_sr i0 (.aclr(), .aset(), .clock(1'b1), .data(1'b1), .q(q)); endmodule `endif `else `ifdef LATCH `define MODULE latch module `BASE`MODULE ( d, le, q, clk); `undef MODULE input d, le; input clk; always @ (le or d) if (le) d <= q; endmodule `endif `endif `ifdef SHREG `define MODULE shreg module `BASE`MODULE ( d, q, clk, rst); `undef MODULE parameter depth = 10; input d; output q; input clk, rst; reg [1:depth] dffs; always @ (posedge clk or posedge rst) if (rst) dffs <= {depth{1'b0}}; else dffs <= {d,dffs[1:depth-1]}; assign q = dffs[depth]; endmodule `endif `ifdef SHREG_CE `define MODULE shreg_ce module `BASE`MODULE ( d, ce, q, clk, rst); `undef MODULE parameter depth = 10; input d, ce; output q; input clk, rst; reg [1:depth] dffs; always @ (posedge clk or posedge rst) if (rst) dffs <= {depth{1'b0}}; else if (ce) dffs <= {d,dffs[1:depth-1]}; assign q = dffs[depth]; endmodule `endif `ifdef DELAY `define MODULE delay module `BASE`MODULE ( d, q, clk, rst); `undef MODULE parameter depth = 10; input d; output q; input clk, rst; reg [1:depth] dffs; always @ (posedge clk or posedge rst) if (rst) dffs <= {depth{1'b0}}; else dffs <= {d,dffs[1:depth-1]}; assign q = dffs[depth]; endmodule `endif `ifdef DELAY_EMPTYFLAG `define MODULE delay_emptyflag module `BASE`MODULE ( d, q, emptyflag, clk, rst); `undef MODULE parameter depth = 10; input d; output q, emptyflag; input clk, rst; reg [1:depth] dffs; always @ (posedge clk or posedge rst) if (rst) dffs <= {depth{1'b0}}; else dffs <= {d,dffs[1:depth-1]}; assign q = dffs[depth]; assign emptyflag = !(|dffs); endmodule `endif `ifdef PULSE2TOGGLE `define MODULE pulse2toggle module `BASE`MODULE ( pl, q, clk, rst); `undef MODULE input pl; output reg q; input clk, rst; always @ (posedge clk or posedge rst) if (rst) q <= 1'b0; else q <= pl ^ q; endmodule `endif `ifdef TOGGLE2PULSE `define MODULE toggle2pulse module `BASE`MODULE (d, pl, clk, rst); `undef MODULE input d; output pl; input clk, rst; reg dff; always @ (posedge clk or posedge rst) if (rst) dff <= 1'b0; else dff <= d; assign pl = d ^ dff; endmodule `endif `ifdef SYNCHRONIZER `define MODULE synchronizer module `BASE`MODULE (d, q, clk, rst); `undef MODULE input d; output reg q; output clk, rst; reg dff; always @ (posedge clk or posedge rst) if (rst) {dff,q} <= 2'b00; else {dff,q} <= {d,dff}; endmodule `endif `ifdef CDC `define MODULE cdc module `BASE`MODULE ( start_pl, take_it_pl, take_it_grant_pl, got_it_pl, clk_src, rst_src, clk_dst, rst_dst); `undef MODULE input start_pl; output take_it_pl; input take_it_grant_pl; // note: connect to take_it_pl to generate automatic ack output got_it_pl; input clk_src, rst_src; input clk_dst, rst_dst; wire take_it_tg, take_it_tg_sync; wire got_it_tg, got_it_tg_sync; // src -> dst `define MODULE pulse2toggle `BASE`MODULE p2t0 ( `undef MODULE .pl(start_pl), .q(take_it_tg), .clk(clk_src), .rst(rst_src)); `define MODULE synchronizer `BASE`MODULE sync0 ( `undef MODULE .d(take_it_tg), .q(take_it_tg_sync), .clk(clk_dst), .rst(rst_dst)); `define MODULE toggle2pulse `BASE`MODULE t2p0 ( `undef MODULE .d(take_it_sync), .pl(take_it_pl), .clk(clk_dst), .rst(rst_dst)); // dst -> src `define MODULE pulse2toggle `BASE`MODULE p2t1 ( `undef MODULE .pl(take_it_grant_pl), .q(got_it_tg), .clk(clk_dst), .rst(rst_dst)); `define MODULE synchronizer `BASE`MODULE sync1 ( `undef MODULE .d(got_it_tg), .q(got_it_tg_sync), .clk(clk_src), .rst(rst_src)); `define MODULE toggle2pulse `BASE`MODULE t2p1 ( `undef MODULE .d(take_it_grant_tg_sync), .pl(got_it_pl), .clk(clk_src), .rst(rst_src)); endmodule `endif ////////////////////////////////////////////////////////////////////// //// //// //// Logic functions //// //// //// //// Description //// //// Logic functions such as multiplexers //// //// //// //// //// //// To Do: //// //// - //// //// //// //// Author(s): //// //// - Michael Unneback, unneback@opencores.org //// //// ORSoC AB //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2010 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// `ifdef MUX_ANDOR `define MODULE mux_andor module `BASE`MODULE ( a, sel, dout); `undef MODULE parameter width = 32; parameter nr_of_ports = 4; input [nr_of_ports*width-1:0] a; input [nr_of_ports-1:0] sel; output reg [width-1:0] dout; integer i,j; always @ (a, sel) begin dout = a[width-1:0] & {width{sel[0]}}; for (i=1;i<nr_of_ports;i=i+1) for (j=0;j<width;j=j+1) dout[j] = (a[i*width + j] & sel[i]) | dout[j]; end endmodule `endif `ifdef MUX2_ANDOR `define MODULE mux2_andor module `BASE`MODULE ( a1, a0, sel, dout); `undef MODULE parameter width = 32; localparam nr_of_ports = 2; input [width-1:0] a1, a0; input [nr_of_ports-1:0] sel; output [width-1:0] dout; `define MODULE mux_andor `BASE`MODULE # ( .width(width), .nr_of_ports(nr_of_ports)) mux0( .a({a1,a0}), .sel(sel), .dout(dout)); `undef MODULE endmodule `endif `ifdef MUX3_ANDOR `define MODULE mux3_andor module `BASE`MODULE ( a2, a1, a0, sel, dout); `undef MODULE parameter width = 32; localparam nr_of_ports = 3; input [width-1:0] a2, a1, a0; input [nr_of_ports-1:0] sel; output [width-1:0] dout; `define MODULE mux_andor `BASE`MODULE # ( .width(width), .nr_of_ports(nr_of_ports)) mux0( .a({a2,a1,a0}), .sel(sel), .dout(dout)); `undef MODULE endmodule `endif `ifdef MUX4_ANDOR `define MODULE mux4_andor module `BASE`MODULE ( a3, a2, a1, a0, sel, dout); `undef MODULE parameter width = 32; localparam nr_of_ports = 4; input [width-1:0] a3, a2, a1, a0; input [nr_of_ports-1:0] sel; output [width-1:0] dout; `define MODULE mux_andor `BASE`MODULE # ( .width(width), .nr_of_ports(nr_of_ports)) mux0( .a({a3,a2,a1,a0}), .sel(sel), .dout(dout)); `undef MODULE endmodule `endif `ifdef MUX5_ANDOR `define MODULE mux5_andor module `BASE`MODULE ( a4, a3, a2, a1, a0, sel, dout); `undef MODULE parameter width = 32; localparam nr_of_ports = 5; input [width-1:0] a4, a3, a2, a1, a0; input [nr_of_ports-1:0] sel; output [width-1:0] dout; `define MODULE mux_andor `BASE`MODULE # ( .width(width), .nr_of_ports(nr_of_ports)) mux0( .a({a4,a3,a2,a1,a0}), .sel(sel), .dout(dout)); `undef MODULE endmodule `endif `ifdef MUX6_ANDOR `define MODULE mux6_andor module `BASE`MODULE ( a5, a4, a3, a2, a1, a0, sel, dout); `undef MODULE parameter width = 32; localparam nr_of_ports = 6; input [width-1:0] a5, a4, a3, a2, a1, a0; input [nr_of_ports-1:0] sel; output [width-1:0] dout; `define MODULE mux_andor `BASE`MODULE # ( .width(width), .nr_of_ports(nr_of_ports)) mux0( .a({a5,a4,a3,a2,a1,a0}), .sel(sel), .dout(dout)); `undef MODULE endmodule `endif `ifdef PARITY `define MODULE parity_generate module `BASE`MODULE (data, parity); `undef MODULE parameter word_size = 32; parameter chunk_size = 8; parameter parity_type = 1'b0; // 0 - even, 1 - odd parity input [word_size-1:0] data; output reg [word_size/chunk_size-1:0] parity; integer i,j; always @ (data) for (i=0;i<word_size/chunk_size;i=i+1) begin parity[i] = parity_type; for (j=0;j<chunk_size;j=j+1) begin parity[i] = data[i*chunk_size+j] ^ parity[i]; end end endmodule `define MODULE parity_check module `BASE`MODULE( data, parity, parity_error); `undef MODULE parameter word_size = 32; parameter chunk_size = 8; parameter parity_type = 1'b0; // 0 - even, 1 - odd parity input [word_size-1:0] data; input [word_size/chunk_size-1:0] parity; output parity_error; reg [word_size/chunk_size-1:0] error_flag; integer i,j; always @ (data or parity) for (i=0;i<word_size/chunk_size;i=i+1) begin error_flag[i] = parity[i] ^ parity_type; for (j=0;j<chunk_size;j=j+1) begin error_flag[i] = data[i*chunk_size+j] ^ error_flag[i]; end end assign parity_error = |error_flag; endmodule `endif////////////////////////////////////////////////////////////////////// //// //// //// IO functions //// //// //// //// Description //// //// IO functions such as IOB flip-flops //// //// //// //// //// //// To Do: //// //// - //// //// //// //// Author(s): //// //// - Michael Unneback, unneback@opencores.org //// //// ORSoC AB //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2010 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// `timescale 1ns/1ns `ifdef O_DFF `define MODULE o_dff module `BASE`MODULE (d_i, o_pad, clk, rst); `undef MODULE parameter width = 1; parameter reset_value = {width{1'b0}}; input [width-1:0] d_i; output [width-1:0] o_pad; input clk, rst; wire [width-1:0] d_i_int `SYN_KEEP; reg [width-1:0] o_pad_int; assign d_i_int = d_i; genvar i; generate for (i=0;i<width;i=i+1) begin always @ (posedge clk or posedge rst) if (rst) o_pad_int[i] <= reset_value[i]; else o_pad_int[i] <= d_i_int[i]; assign #1 o_pad[i] = o_pad_int[i]; end endgenerate endmodule `endif `timescale 1ns/1ns `ifdef IO_DFF_OE `define MODULE io_dff_oe module `BASE`MODULE ( d_i, d_o, oe, io_pad, clk, rst); `undef MODULE parameter width = 1; input [width-1:0] d_o; output reg [width-1:0] d_i; input oe; inout [width-1:0] io_pad; input clk, rst; wire [width-1:0] oe_d `SYN_KEEP; reg [width-1:0] oe_q; reg [width-1:0] d_o_q; assign oe_d = {width{oe}}; genvar i; generate for (i=0;i<width;i=i+1) begin always @ (posedge clk or posedge rst) if (rst) oe_q[i] <= 1'b0; else oe_q[i] <= oe_d[i]; always @ (posedge clk or posedge rst) if (rst) d_o_q[i] <= 1'b0; else d_o_q[i] <= d_o[i]; always @ (posedge clk or posedge rst) if (rst) d_i[i] <= 1'b0; else d_i[i] <= io_pad[i]; assign #1 io_pad[i] = (oe_q[i]) ? d_o_q[i] : 1'bz; end endgenerate endmodule `endif `ifdef CNT_BIN ////////////////////////////////////////////////////////////////////// //// //// //// Versatile counter //// //// //// //// Description //// //// Versatile counter, a reconfigurable binary, gray or LFSR //// //// counter //// //// //// //// To Do: //// //// - add LFSR with more taps //// //// //// //// Author(s): //// //// - Michael Unneback, unneback@opencores.org //// //// ORSoC AB //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2009 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // binary counter `define MODULE cnt_bin module `BASE`MODULE ( `undef MODULE q, rst, clk); parameter length = 4; output [length:1] q; input rst; input clk; parameter clear_value = 0; parameter set_value = 1; parameter wrap_value = 0; parameter level1_value = 15; reg [length:1] qi; wire [length:1] q_next; assign q_next = qi + {{length-1{1'b0}},1'b1}; always @ (posedge clk or posedge rst) if (rst) qi <= {length{1'b0}}; else qi <= q_next; assign q = qi; endmodule `endif `ifdef CNT_BIN_CLEAR ////////////////////////////////////////////////////////////////////// //// //// //// Versatile counter //// //// //// //// Description //// //// Versatile counter, a reconfigurable binary, gray or LFSR //// //// counter //// //// //// //// To Do: //// //// - add LFSR with more taps //// //// //// //// Author(s): //// //// - Michael Unneback, unneback@opencores.org //// //// ORSoC AB //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2009 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // binary counter `define MODULE cnt_bin_clear module `BASE`MODULE ( `undef MODULE clear, q, rst, clk); parameter length = 4; input clear; output [length:1] q; input rst; input clk; parameter clear_value = 0; parameter set_value = 1; parameter wrap_value = 0; parameter level1_value = 15; reg [length:1] qi; wire [length:1] q_next; assign q_next = clear ? {length{1'b0}} :qi + {{length-1{1'b0}},1'b1}; always @ (posedge clk or posedge rst) if (rst) qi <= {length{1'b0}}; else qi <= q_next; assign q = qi; endmodule `endif `ifdef CNT_BIN_CE ////////////////////////////////////////////////////////////////////// //// //// //// Versatile counter //// //// //// //// Description //// //// Versatile counter, a reconfigurable binary, gray or LFSR //// //// counter //// //// //// //// To Do: //// //// - add LFSR with more taps //// //// //// //// Author(s): //// //// - Michael Unneback, unneback@opencores.org //// //// ORSoC AB //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2009 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // binary counter `define MODULE cnt_bin_ce module `BASE`MODULE ( `undef MODULE cke, q, rst, clk); parameter length = 4; input cke; output [length:1] q; input rst; input clk; parameter clear_value = 0; parameter set_value = 1; parameter wrap_value = 0; parameter level1_value = 15; reg [length:1] qi; wire [length:1] q_next; assign q_next = qi + {{length-1{1'b0}},1'b1}; always @ (posedge clk or posedge rst) if (rst) qi <= {length{1'b0}}; else if (cke) qi <= q_next; assign q = qi; endmodule `endif `ifdef CNT_BIN_CE_CLEAR ////////////////////////////////////////////////////////////////////// //// //// //// Versatile counter //// //// //// //// Description //// //// Versatile counter, a reconfigurable binary, gray or LFSR //// //// counter //// //// //// //// To Do: //// //// - add LFSR with more taps //// //// //// //// Author(s): //// //// - Michael Unneback, unneback@opencores.org //// //// ORSoC AB //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2009 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // binary counter `define MODULE cnt_bin_ce_clear module `BASE`MODULE ( `undef MODULE clear, cke, q, rst, clk); parameter length = 4; input clear; input cke; output [length:1] q; input rst; input clk; parameter clear_value = 0; parameter set_value = 1; parameter wrap_value = 0; parameter level1_value = 15; reg [length:1] qi; wire [length:1] q_next; assign q_next = clear ? {length{1'b0}} :qi + {{length-1{1'b0}},1'b1}; always @ (posedge clk or posedge rst) if (rst) qi <= {length{1'b0}}; else if (cke) qi <= q_next; assign q = qi; endmodule `endif `ifdef CNT_BIN_CE_CLEAR_L1_L2 ////////////////////////////////////////////////////////////////////// //// //// //// Versatile counter //// //// //// //// Description //// //// Versatile counter, a reconfigurable binary, gray or LFSR //// //// counter //// //// //// //// To Do: //// //// - add LFSR with more taps //// //// //// //// Author(s): //// //// - Michael Unneback, unneback@opencores.org //// //// ORSoC AB //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2009 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // binary counter `define MODULE cnt_bin_ce_clear_l1_l2 module `BASE`MODULE ( `undef MODULE clear, cke, q, level1, level2, rst, clk); parameter length = 4; input clear; input cke; output [length:1] q; output reg level1; output reg level2; input rst; input clk; parameter clear_value = 0; parameter set_value = 1; parameter wrap_value = 15; parameter level1_value = 8; parameter level2_value = 15; wire rew; assign rew = 1'b0; reg [length:1] qi; wire [length:1] q_next; assign q_next = clear ? {length{1'b0}} :qi + {{length-1{1'b0}},1'b1}; always @ (posedge clk or posedge rst) if (rst) qi <= {length{1'b0}}; else if (cke) qi <= q_next; assign q = qi; always @ (posedge clk or posedge rst) if (rst) level1 <= 1'b0; else if (cke) if (clear) level1 <= 1'b0; else if (q_next == level1_value) level1 <= 1'b1; else if (qi == level1_value & rew) level1 <= 1'b0; always @ (posedge clk or posedge rst) if (rst) level2 <= 1'b0; else if (cke) if (clear) level2 <= 1'b0; else if (q_next == level2_value) level2 <= 1'b1; else if (qi == level2_value & rew) level2 <= 1'b0; endmodule `endif `ifdef CNT_BIN_CE_CLEAR_SET_REW ////////////////////////////////////////////////////////////////////// //// //// //// Versatile counter //// //// //// //// Description //// //// Versatile counter, a reconfigurable binary, gray or LFSR //// //// counter //// //// //// //// To Do: //// //// - add LFSR with more taps //// //// //// //// Author(s): //// //// - Michael Unneback, unneback@opencores.org //// //// ORSoC AB //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2009 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // binary counter `define MODULE cnt_bin_ce_clear_set_rew module `BASE`MODULE ( `undef MODULE clear, set, cke, rew, q, rst, clk); parameter length = 4; input clear; input set; input cke; input rew; output [length:1] q; input rst; input clk; parameter clear_value = 0; parameter set_value = 1; parameter wrap_value = 0; parameter level1_value = 15; reg [length:1] qi; wire [length:1] q_next, q_next_fw, q_next_rew; assign q_next_fw = clear ? {length{1'b0}} : set ? set_value :qi + {{length-1{1'b0}},1'b1}; assign q_next_rew = clear ? clear_value : set ? set_value :qi - {{length-1{1'b0}},1'b1}; assign q_next = rew ? q_next_rew : q_next_fw; always @ (posedge clk or posedge rst) if (rst) qi <= {length{1'b0}}; else if (cke) qi <= q_next; assign q = qi; endmodule `endif `ifdef CNT_BIN_CE_REW_L1 ////////////////////////////////////////////////////////////////////// //// //// //// Versatile counter //// //// //// //// Description //// //// Versatile counter, a reconfigurable binary, gray or LFSR //// //// counter //// //// //// //// To Do: //// //// - add LFSR with more taps //// //// //// //// Author(s): //// //// - Michael Unneback, unneback@opencores.org //// //// ORSoC AB //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2009 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // binary counter `define MODULE cnt_bin_ce_rew_l1 module `BASE`MODULE ( `undef MODULE cke, rew, level1, rst, clk); parameter length = 4; input cke; input rew; output reg level1; input rst; input clk; parameter clear_value = 0; parameter set_value = 1; parameter wrap_value = 1; parameter level1_value = 15; wire clear; assign clear = 1'b0; reg [length:1] qi; wire [length:1] q_next, q_next_fw, q_next_rew; assign q_next_fw = qi + {{length-1{1'b0}},1'b1}; assign q_next_rew = qi - {{length-1{1'b0}},1'b1}; assign q_next = rew ? q_next_rew : q_next_fw; always @ (posedge clk or posedge rst) if (rst) qi <= {length{1'b0}}; else if (cke) qi <= q_next; always @ (posedge clk or posedge rst) if (rst) level1 <= 1'b0; else if (cke) if (clear) level1 <= 1'b0; else if (q_next == level1_value) level1 <= 1'b1; else if (qi == level1_value & rew) level1 <= 1'b0; endmodule `endif `ifdef CNT_BIN_CE_REW_ZQ_L1 ////////////////////////////////////////////////////////////////////// //// //// //// Versatile counter //// //// //// //// Description //// //// Versatile counter, a reconfigurable binary, gray or LFSR //// //// counter //// //// //// //// To Do: //// //// - add LFSR with more taps //// //// //// //// Author(s): //// //// - Michael Unneback, unneback@opencores.org //// //// ORSoC AB //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2009 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // binary counter `define MODULE cnt_bin_ce_rew_zq_l1 module `BASE`MODULE ( `undef MODULE cke, rew, zq, level1, rst, clk); parameter length = 4; input cke; input rew; output reg zq; output reg level1; input rst; input clk; parameter clear_value = 0; parameter set_value = 1; parameter wrap_value = 1; parameter level1_value = 15; wire clear; assign clear = 1'b0; reg [length:1] qi; wire [length:1] q_next, q_next_fw, q_next_rew; assign q_next_fw = qi + {{length-1{1'b0}},1'b1}; assign q_next_rew = qi - {{length-1{1'b0}},1'b1}; assign q_next = rew ? q_next_rew : q_next_fw; always @ (posedge clk or posedge rst) if (rst) qi <= {length{1'b0}}; else if (cke) qi <= q_next; always @ (posedge clk or posedge rst) if (rst) zq <= 1'b1; else if (cke) zq <= q_next == {length{1'b0}}; always @ (posedge clk or posedge rst) if (rst) level1 <= 1'b0; else if (cke) if (clear) level1 <= 1'b0; else if (q_next == level1_value) level1 <= 1'b1; else if (qi == level1_value & rew) level1 <= 1'b0; endmodule `endif `ifdef CNT_BIN_CE_REW_Q_ZQ_L1 ////////////////////////////////////////////////////////////////////// //// //// //// Versatile counter //// //// //// //// Description //// //// Versatile counter, a reconfigurable binary, gray or LFSR //// //// counter //// //// //// //// To Do: //// //// - add LFSR with more taps //// //// //// //// Author(s): //// //// - Michael Unneback, unneback@opencores.org //// //// ORSoC AB //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2009 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // binary counter `define MODULE cnt_bin_ce_rew_q_zq_l1 module `BASE`MODULE ( `undef MODULE cke, rew, q, zq, level1, rst, clk); parameter length = 4; input cke; input rew; output [length:1] q; output reg zq; output reg level1; input rst; input clk; parameter clear_value = 0; parameter set_value = 1; parameter wrap_value = 1; parameter level1_value = 15; wire clear; assign clear = 1'b0; reg [length:1] qi; wire [length:1] q_next, q_next_fw, q_next_rew; assign q_next_fw = qi + {{length-1{1'b0}},1'b1}; assign q_next_rew = qi - {{length-1{1'b0}},1'b1}; assign q_next = rew ? q_next_rew : q_next_fw; always @ (posedge clk or posedge rst) if (rst) qi <= {length{1'b0}}; else if (cke) qi <= q_next; assign q = qi; always @ (posedge clk or posedge rst) if (rst) zq <= 1'b1; else if (cke) zq <= q_next == {length{1'b0}}; always @ (posedge clk or posedge rst) if (rst) level1 <= 1'b0; else if (cke) if (clear) level1 <= 1'b0; else if (q_next == level1_value) level1 <= 1'b1; else if (qi == level1_value & rew) level1 <= 1'b0; endmodule `endif `ifdef CNT_LFSR_ZQ ////////////////////////////////////////////////////////////////////// //// //// //// Versatile counter //// //// //// //// Description //// //// Versatile counter, a reconfigurable binary, gray or LFSR //// //// counter //// //// //// //// To Do: //// //// - add LFSR with more taps //// //// //// //// Author(s): //// //// - Michael Unneback, unneback@opencores.org //// //// ORSoC AB //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2009 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // LFSR counter `define MODULE cnt_lfsr_zq module `BASE`MODULE ( `undef MODULE zq, rst, clk); parameter length = 4; output reg zq; input rst; input clk; parameter clear_value = 0; parameter set_value = 1; parameter wrap_value = 8; parameter level1_value = 15; reg [length:1] qi; reg lfsr_fb; wire [length:1] q_next; reg [32:1] polynom; integer i; always @ (qi) begin case (length) 2: polynom = 32'b11; // 0x3 3: polynom = 32'b110; // 0x6 4: polynom = 32'b1100; // 0xC 5: polynom = 32'b10100; // 0x14 6: polynom = 32'b110000; // 0x30 7: polynom = 32'b1100000; // 0x60 8: polynom = 32'b10111000; // 0xb8 9: polynom = 32'b100010000; // 0x110 10: polynom = 32'b1001000000; // 0x240 11: polynom = 32'b10100000000; // 0x500 12: polynom = 32'b100000101001; // 0x829 13: polynom = 32'b1000000001100; // 0x100C 14: polynom = 32'b10000000010101; // 0x2015 15: polynom = 32'b110000000000000; // 0x6000 16: polynom = 32'b1101000000001000; // 0xD008 17: polynom = 32'b10010000000000000; // 0x12000 18: polynom = 32'b100000010000000000; // 0x20400 19: polynom = 32'b1000000000000100011; // 0x40023 20: polynom = 32'b10010000000000000000; // 0x90000 21: polynom = 32'b101000000000000000000; // 0x140000 22: polynom = 32'b1100000000000000000000; // 0x300000 23: polynom = 32'b10000100000000000000000; // 0x420000 24: polynom = 32'b111000010000000000000000; // 0xE10000 25: polynom = 32'b1001000000000000000000000; // 0x1200000 26: polynom = 32'b10000000000000000000100011; // 0x2000023 27: polynom = 32'b100000000000000000000010011; // 0x4000013 28: polynom = 32'b1100100000000000000000000000; // 0xC800000 29: polynom = 32'b10100000000000000000000000000; // 0x14000000 30: polynom = 32'b100000000000000000000000101001; // 0x20000029 31: polynom = 32'b1001000000000000000000000000000; // 0x48000000 32: polynom = 32'b10000000001000000000000000000011; // 0x80200003 default: polynom = 32'b0; endcase lfsr_fb = qi[length]; for (i=length-1; i>=1; i=i-1) begin if (polynom[i]) lfsr_fb = lfsr_fb ~^ qi[i]; end end assign q_next = (qi == wrap_value) ? {length{1'b0}} :{qi[length-1:1],lfsr_fb}; always @ (posedge clk or posedge rst) if (rst) qi <= {length{1'b0}}; else qi <= q_next; always @ (posedge clk or posedge rst) if (rst) zq <= 1'b1; else zq <= q_next == {length{1'b0}}; endmodule `endif `ifdef CNT_LFSR_CE ////////////////////////////////////////////////////////////////////// //// //// //// Versatile counter //// //// //// //// Description //// //// Versatile counter, a reconfigurable binary, gray or LFSR //// //// counter //// //// //// //// To Do: //// //// - add LFSR with more taps //// //// //// //// Author(s): //// //// - Michael Unneback, unneback@opencores.org //// //// ORSoC AB //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2009 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // LFSR counter `define MODULE cnt_lfsr_ce module `BASE`MODULE ( `undef MODULE cke, zq, rst, clk); parameter length = 4; input cke; output reg zq; input rst; input clk; parameter clear_value = 0; parameter set_value = 1; parameter wrap_value = 0; parameter level1_value = 15; reg [length:1] qi; reg lfsr_fb; wire [length:1] q_next; reg [32:1] polynom; integer i; always @ (qi) begin case (length) 2: polynom = 32'b11; // 0x3 3: polynom = 32'b110; // 0x6 4: polynom = 32'b1100; // 0xC 5: polynom = 32'b10100; // 0x14 6: polynom = 32'b110000; // 0x30 7: polynom = 32'b1100000; // 0x60 8: polynom = 32'b10111000; // 0xb8 9: polynom = 32'b100010000; // 0x110 10: polynom = 32'b1001000000; // 0x240 11: polynom = 32'b10100000000; // 0x500 12: polynom = 32'b100000101001; // 0x829 13: polynom = 32'b1000000001100; // 0x100C 14: polynom = 32'b10000000010101; // 0x2015 15: polynom = 32'b110000000000000; // 0x6000 16: polynom = 32'b1101000000001000; // 0xD008 17: polynom = 32'b10010000000000000; // 0x12000 18: polynom = 32'b100000010000000000; // 0x20400 19: polynom = 32'b1000000000000100011; // 0x40023 20: polynom = 32'b10010000000000000000; // 0x90000 21: polynom = 32'b101000000000000000000; // 0x140000 22: polynom = 32'b1100000000000000000000; // 0x300000 23: polynom = 32'b10000100000000000000000; // 0x420000 24: polynom = 32'b111000010000000000000000; // 0xE10000 25: polynom = 32'b1001000000000000000000000; // 0x1200000 26: polynom = 32'b10000000000000000000100011; // 0x2000023 27: polynom = 32'b100000000000000000000010011; // 0x4000013 28: polynom = 32'b1100100000000000000000000000; // 0xC800000 29: polynom = 32'b10100000000000000000000000000; // 0x14000000 30: polynom = 32'b100000000000000000000000101001; // 0x20000029 31: polynom = 32'b1001000000000000000000000000000; // 0x48000000 32: polynom = 32'b10000000001000000000000000000011; // 0x80200003 default: polynom = 32'b0; endcase lfsr_fb = qi[length]; for (i=length-1; i>=1; i=i-1) begin if (polynom[i]) lfsr_fb = lfsr_fb ~^ qi[i]; end end assign q_next = (qi == wrap_value) ? {length{1'b0}} :{qi[length-1:1],lfsr_fb}; always @ (posedge clk or posedge rst) if (rst) qi <= {length{1'b0}}; else if (cke) qi <= q_next; always @ (posedge clk or posedge rst) if (rst) zq <= 1'b1; else if (cke) zq <= q_next == {length{1'b0}}; endmodule `endif `ifdef CNT_LFSR_CE_ZQ ////////////////////////////////////////////////////////////////////// //// //// //// Versatile counter //// //// //// //// Description //// //// Versatile counter, a reconfigurable binary, gray or LFSR //// //// counter //// //// //// //// To Do: //// //// - add LFSR with more taps //// //// //// //// Author(s): //// //// - Michael Unneback, unneback@opencores.org //// //// ORSoC AB //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2009 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // LFSR counter `define MODULE cnt_lfsr_ce_zq module `BASE`MODULE ( `undef MODULE cke, zq, rst, clk); parameter length = 4; input cke; output reg zq; input rst; input clk; parameter clear_value = 0; parameter set_value = 1; parameter wrap_value = 8; parameter level1_value = 15; reg [length:1] qi; reg lfsr_fb; wire [length:1] q_next; reg [32:1] polynom; integer i; always @ (qi) begin case (length) 2: polynom = 32'b11; // 0x3 3: polynom = 32'b110; // 0x6 4: polynom = 32'b1100; // 0xC 5: polynom = 32'b10100; // 0x14 6: polynom = 32'b110000; // 0x30 7: polynom = 32'b1100000; // 0x60 8: polynom = 32'b10111000; // 0xb8 9: polynom = 32'b100010000; // 0x110 10: polynom = 32'b1001000000; // 0x240 11: polynom = 32'b10100000000; // 0x500 12: polynom = 32'b100000101001; // 0x829 13: polynom = 32'b1000000001100; // 0x100C 14: polynom = 32'b10000000010101; // 0x2015 15: polynom = 32'b110000000000000; // 0x6000 16: polynom = 32'b1101000000001000; // 0xD008 17: polynom = 32'b10010000000000000; // 0x12000 18: polynom = 32'b100000010000000000; // 0x20400 19: polynom = 32'b1000000000000100011; // 0x40023 20: polynom = 32'b10010000000000000000; // 0x90000 21: polynom = 32'b101000000000000000000; // 0x140000 22: polynom = 32'b1100000000000000000000; // 0x300000 23: polynom = 32'b10000100000000000000000; // 0x420000 24: polynom = 32'b111000010000000000000000; // 0xE10000 25: polynom = 32'b1001000000000000000000000; // 0x1200000 26: polynom = 32'b10000000000000000000100011; // 0x2000023 27: polynom = 32'b100000000000000000000010011; // 0x4000013 28: polynom = 32'b1100100000000000000000000000; // 0xC800000 29: polynom = 32'b10100000000000000000000000000; // 0x14000000 30: polynom = 32'b100000000000000000000000101001; // 0x20000029 31: polynom = 32'b1001000000000000000000000000000; // 0x48000000 32: polynom = 32'b10000000001000000000000000000011; // 0x80200003 default: polynom = 32'b0; endcase lfsr_fb = qi[length]; for (i=length-1; i>=1; i=i-1) begin if (polynom[i]) lfsr_fb = lfsr_fb ~^ qi[i]; end end assign q_next = (qi == wrap_value) ? {length{1'b0}} :{qi[length-1:1],lfsr_fb}; always @ (posedge clk or posedge rst) if (rst) qi <= {length{1'b0}}; else if (cke) qi <= q_next; always @ (posedge clk or posedge rst) if (rst) zq <= 1'b1; else if (cke) zq <= q_next == {length{1'b0}}; endmodule `endif `ifdef CNT_LFSR_CE_Q ////////////////////////////////////////////////////////////////////// //// //// //// Versatile counter //// //// //// //// Description //// //// Versatile counter, a reconfigurable binary, gray or LFSR //// //// counter //// //// //// //// To Do: //// //// - add LFSR with more taps //// //// //// //// Author(s): //// //// - Michael Unneback, unneback@opencores.org //// //// ORSoC AB //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2009 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // LFSR counter `define MODULE cnt_lfsr_ce_q module `BASE`MODULE ( `undef MODULE cke, q, rst, clk); parameter length = 4; input cke; output [length:1] q; input rst; input clk; parameter clear_value = 0; parameter set_value = 1; parameter wrap_value = 8; parameter level1_value = 15; reg [length:1] qi; reg lfsr_fb; wire [length:1] q_next; reg [32:1] polynom; integer i; always @ (qi) begin case (length) 2: polynom = 32'b11; // 0x3 3: polynom = 32'b110; // 0x6 4: polynom = 32'b1100; // 0xC 5: polynom = 32'b10100; // 0x14 6: polynom = 32'b110000; // 0x30 7: polynom = 32'b1100000; // 0x60 8: polynom = 32'b10111000; // 0xb8 9: polynom = 32'b100010000; // 0x110 10: polynom = 32'b1001000000; // 0x240 11: polynom = 32'b10100000000; // 0x500 12: polynom = 32'b100000101001; // 0x829 13: polynom = 32'b1000000001100; // 0x100C 14: polynom = 32'b10000000010101; // 0x2015 15: polynom = 32'b110000000000000; // 0x6000 16: polynom = 32'b1101000000001000; // 0xD008 17: polynom = 32'b10010000000000000; // 0x12000 18: polynom = 32'b100000010000000000; // 0x20400 19: polynom = 32'b1000000000000100011; // 0x40023 20: polynom = 32'b10010000000000000000; // 0x90000 21: polynom = 32'b101000000000000000000; // 0x140000 22: polynom = 32'b1100000000000000000000; // 0x300000 23: polynom = 32'b10000100000000000000000; // 0x420000 24: polynom = 32'b111000010000000000000000; // 0xE10000 25: polynom = 32'b1001000000000000000000000; // 0x1200000 26: polynom = 32'b10000000000000000000100011; // 0x2000023 27: polynom = 32'b100000000000000000000010011; // 0x4000013 28: polynom = 32'b1100100000000000000000000000; // 0xC800000 29: polynom = 32'b10100000000000000000000000000; // 0x14000000 30: polynom = 32'b100000000000000000000000101001; // 0x20000029 31: polynom = 32'b1001000000000000000000000000000; // 0x48000000 32: polynom = 32'b10000000001000000000000000000011; // 0x80200003 default: polynom = 32'b0; endcase lfsr_fb = qi[length]; for (i=length-1; i>=1; i=i-1) begin if (polynom[i]) lfsr_fb = lfsr_fb ~^ qi[i]; end end assign q_next = (qi == wrap_value) ? {length{1'b0}} :{qi[length-1:1],lfsr_fb}; always @ (posedge clk or posedge rst) if (rst) qi <= {length{1'b0}}; else if (cke) qi <= q_next; assign q = qi; endmodule `endif `ifdef CNT_LFSR_CE_CLEAR_Q ////////////////////////////////////////////////////////////////////// //// //// //// Versatile counter //// //// //// //// Description //// //// Versatile counter, a reconfigurable binary, gray or LFSR //// //// counter //// //// //// //// To Do: //// //// - add LFSR with more taps //// //// //// //// Author(s): //// //// - Michael Unneback, unneback@opencores.org //// //// ORSoC AB //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2009 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // LFSR counter `define MODULE cnt_lfsr_ce_clear_q module `BASE`MODULE ( `undef MODULE clear, cke, q, rst, clk); parameter length = 4; input clear; input cke; output [length:1] q; input rst; input clk; parameter clear_value = 0; parameter set_value = 1; parameter wrap_value = 8; parameter level1_value = 15; reg [length:1] qi; reg lfsr_fb; wire [length:1] q_next; reg [32:1] polynom; integer i; always @ (qi) begin case (length) 2: polynom = 32'b11; // 0x3 3: polynom = 32'b110; // 0x6 4: polynom = 32'b1100; // 0xC 5: polynom = 32'b10100; // 0x14 6: polynom = 32'b110000; // 0x30 7: polynom = 32'b1100000; // 0x60 8: polynom = 32'b10111000; // 0xb8 9: polynom = 32'b100010000; // 0x110 10: polynom = 32'b1001000000; // 0x240 11: polynom = 32'b10100000000; // 0x500 12: polynom = 32'b100000101001; // 0x829 13: polynom = 32'b1000000001100; // 0x100C 14: polynom = 32'b10000000010101; // 0x2015 15: polynom = 32'b110000000000000; // 0x6000 16: polynom = 32'b1101000000001000; // 0xD008 17: polynom = 32'b10010000000000000; // 0x12000 18: polynom = 32'b100000010000000000; // 0x20400 19: polynom = 32'b1000000000000100011; // 0x40023 20: polynom = 32'b10010000000000000000; // 0x90000 21: polynom = 32'b101000000000000000000; // 0x140000 22: polynom = 32'b1100000000000000000000; // 0x300000 23: polynom = 32'b10000100000000000000000; // 0x420000 24: polynom = 32'b111000010000000000000000; // 0xE10000 25: polynom = 32'b1001000000000000000000000; // 0x1200000 26: polynom = 32'b10000000000000000000100011; // 0x2000023 27: polynom = 32'b100000000000000000000010011; // 0x4000013 28: polynom = 32'b1100100000000000000000000000; // 0xC800000 29: polynom = 32'b10100000000000000000000000000; // 0x14000000 30: polynom = 32'b100000000000000000000000101001; // 0x20000029 31: polynom = 32'b1001000000000000000000000000000; // 0x48000000 32: polynom = 32'b10000000001000000000000000000011; // 0x80200003 default: polynom = 32'b0; endcase lfsr_fb = qi[length]; for (i=length-1; i>=1; i=i-1) begin if (polynom[i]) lfsr_fb = lfsr_fb ~^ qi[i]; end end assign q_next = clear ? {length{1'b0}} :(qi == wrap_value) ? {length{1'b0}} :{qi[length-1:1],lfsr_fb}; always @ (posedge clk or posedge rst) if (rst) qi <= {length{1'b0}}; else if (cke) qi <= q_next; assign q = qi; endmodule `endif `ifdef CNT_LFSR_CE_Q_ZQ ////////////////////////////////////////////////////////////////////// //// //// //// Versatile counter //// //// //// //// Description //// //// Versatile counter, a reconfigurable binary, gray or LFSR //// //// counter //// //// //// //// To Do: //// //// - add LFSR with more taps //// //// //// //// Author(s): //// //// - Michael Unneback, unneback@opencores.org //// //// ORSoC AB //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2009 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // LFSR counter `define MODULE cnt_lfsr_ce_q_zq module `BASE`MODULE ( `undef MODULE cke, q, zq, rst, clk); parameter length = 4; input cke; output [length:1] q; output reg zq; input rst; input clk; parameter clear_value = 0; parameter set_value = 1; parameter wrap_value = 8; parameter level1_value = 15; reg [length:1] qi; reg lfsr_fb; wire [length:1] q_next; reg [32:1] polynom; integer i; always @ (qi) begin case (length) 2: polynom = 32'b11; // 0x3 3: polynom = 32'b110; // 0x6 4: polynom = 32'b1100; // 0xC 5: polynom = 32'b10100; // 0x14 6: polynom = 32'b110000; // 0x30 7: polynom = 32'b1100000; // 0x60 8: polynom = 32'b10111000; // 0xb8 9: polynom = 32'b100010000; // 0x110 10: polynom = 32'b1001000000; // 0x240 11: polynom = 32'b10100000000; // 0x500 12: polynom = 32'b100000101001; // 0x829 13: polynom = 32'b1000000001100; // 0x100C 14: polynom = 32'b10000000010101; // 0x2015 15: polynom = 32'b110000000000000; // 0x6000 16: polynom = 32'b1101000000001000; // 0xD008 17: polynom = 32'b10010000000000000; // 0x12000 18: polynom = 32'b100000010000000000; // 0x20400 19: polynom = 32'b1000000000000100011; // 0x40023 20: polynom = 32'b10010000000000000000; // 0x90000 21: polynom = 32'b101000000000000000000; // 0x140000 22: polynom = 32'b1100000000000000000000; // 0x300000 23: polynom = 32'b10000100000000000000000; // 0x420000 24: polynom = 32'b111000010000000000000000; // 0xE10000 25: polynom = 32'b1001000000000000000000000; // 0x1200000 26: polynom = 32'b10000000000000000000100011; // 0x2000023 27: polynom = 32'b100000000000000000000010011; // 0x4000013 28: polynom = 32'b1100100000000000000000000000; // 0xC800000 29: polynom = 32'b10100000000000000000000000000; // 0x14000000 30: polynom = 32'b100000000000000000000000101001; // 0x20000029 31: polynom = 32'b1001000000000000000000000000000; // 0x48000000 32: polynom = 32'b10000000001000000000000000000011; // 0x80200003 default: polynom = 32'b0; endcase lfsr_fb = qi[length]; for (i=length-1; i>=1; i=i-1) begin if (polynom[i]) lfsr_fb = lfsr_fb ~^ qi[i]; end end assign q_next = (qi == wrap_value) ? {length{1'b0}} :{qi[length-1:1],lfsr_fb}; always @ (posedge clk or posedge rst) if (rst) qi <= {length{1'b0}}; else if (cke) qi <= q_next; assign q = qi; always @ (posedge clk or posedge rst) if (rst) zq <= 1'b1; else if (cke) zq <= q_next == {length{1'b0}}; endmodule `endif `ifdef CNT_LFSR_CE_REW_L1 ////////////////////////////////////////////////////////////////////// //// //// //// Versatile counter //// //// //// //// Description //// //// Versatile counter, a reconfigurable binary, gray or LFSR //// //// counter //// //// //// //// To Do: //// //// - add LFSR with more taps //// //// //// //// Author(s): //// //// - Michael Unneback, unneback@opencores.org //// //// ORSoC AB //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2009 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // LFSR counter `define MODULE cnt_lfsr_ce_rew_l1 module `BASE`MODULE ( `undef MODULE cke, rew, level1, rst, clk); parameter length = 4; input cke; input rew; output reg level1; input rst; input clk; parameter clear_value = 0; parameter set_value = 1; parameter wrap_value = 8; parameter level1_value = 15; wire clear; assign clear = 1'b0; reg [length:1] qi; reg lfsr_fb, lfsr_fb_rew; wire [length:1] q_next, q_next_fw, q_next_rew; reg [32:1] polynom_rew; integer j; reg [32:1] polynom; integer i; always @ (qi) begin case (length) 2: polynom = 32'b11; // 0x3 3: polynom = 32'b110; // 0x6 4: polynom = 32'b1100; // 0xC 5: polynom = 32'b10100; // 0x14 6: polynom = 32'b110000; // 0x30 7: polynom = 32'b1100000; // 0x60 8: polynom = 32'b10111000; // 0xb8 9: polynom = 32'b100010000; // 0x110 10: polynom = 32'b1001000000; // 0x240 11: polynom = 32'b10100000000; // 0x500 12: polynom = 32'b100000101001; // 0x829 13: polynom = 32'b1000000001100; // 0x100C 14: polynom = 32'b10000000010101; // 0x2015 15: polynom = 32'b110000000000000; // 0x6000 16: polynom = 32'b1101000000001000; // 0xD008 17: polynom = 32'b10010000000000000; // 0x12000 18: polynom = 32'b100000010000000000; // 0x20400 19: polynom = 32'b1000000000000100011; // 0x40023 20: polynom = 32'b10010000000000000000; // 0x90000 21: polynom = 32'b101000000000000000000; // 0x140000 22: polynom = 32'b1100000000000000000000; // 0x300000 23: polynom = 32'b10000100000000000000000; // 0x420000 24: polynom = 32'b111000010000000000000000; // 0xE10000 25: polynom = 32'b1001000000000000000000000; // 0x1200000 26: polynom = 32'b10000000000000000000100011; // 0x2000023 27: polynom = 32'b100000000000000000000010011; // 0x4000013 28: polynom = 32'b1100100000000000000000000000; // 0xC800000 29: polynom = 32'b10100000000000000000000000000; // 0x14000000 30: polynom = 32'b100000000000000000000000101001; // 0x20000029 31: polynom = 32'b1001000000000000000000000000000; // 0x48000000 32: polynom = 32'b10000000001000000000000000000011; // 0x80200003 default: polynom = 32'b0; endcase lfsr_fb = qi[length]; for (i=length-1; i>=1; i=i-1) begin if (polynom[i]) lfsr_fb = lfsr_fb ~^ qi[i]; end end assign q_next_fw = (qi == wrap_value) ? {length{1'b0}} :{qi[length-1:1],lfsr_fb}; always @ (qi) begin case (length) 2: polynom_rew = 32'b11; 3: polynom_rew = 32'b110; 4: polynom_rew = 32'b1100; 5: polynom_rew = 32'b10100; 6: polynom_rew = 32'b110000; 7: polynom_rew = 32'b1100000; 8: polynom_rew = 32'b10111000; 9: polynom_rew = 32'b100010000; 10: polynom_rew = 32'b1001000000; 11: polynom_rew = 32'b10100000000; 12: polynom_rew = 32'b100000101001; 13: polynom_rew = 32'b1000000001100; 14: polynom_rew = 32'b10000000010101; 15: polynom_rew = 32'b110000000000000; 16: polynom_rew = 32'b1101000000001000; 17: polynom_rew = 32'b10010000000000000; 18: polynom_rew = 32'b100000010000000000; 19: polynom_rew = 32'b1000000000000100011; 20: polynom_rew = 32'b10000010000000000000; 21: polynom_rew = 32'b101000000000000000000; 22: polynom_rew = 32'b1100000000000000000000; 23: polynom_rew = 32'b10000100000000000000000; 24: polynom_rew = 32'b111000010000000000000000; 25: polynom_rew = 32'b1001000000000000000000000; 26: polynom_rew = 32'b10000000000000000000100011; 27: polynom_rew = 32'b100000000000000000000010011; 28: polynom_rew = 32'b1100100000000000000000000000; 29: polynom_rew = 32'b10100000000000000000000000000; 30: polynom_rew = 32'b100000000000000000000000101001; 31: polynom_rew = 32'b1001000000000000000000000000000; 32: polynom_rew = 32'b10000000001000000000000000000011; default: polynom_rew = 32'b0; endcase // rotate left polynom_rew[length:1] = { polynom_rew[length-2:1],polynom_rew[length] }; lfsr_fb_rew = qi[length]; for (i=length-1; i>=1; i=i-1) begin if (polynom_rew[i]) lfsr_fb_rew = lfsr_fb_rew ~^ qi[i]; end end assign q_next_rew = (qi == wrap_value) ? {length{1'b0}} :{lfsr_fb_rew,qi[length:2]}; assign q_next = rew ? q_next_rew : q_next_fw; always @ (posedge clk or posedge rst) if (rst) qi <= {length{1'b0}}; else if (cke) qi <= q_next; always @ (posedge clk or posedge rst) if (rst) level1 <= 1'b0; else if (cke) if (clear) level1 <= 1'b0; else if (q_next == level1_value) level1 <= 1'b1; else if (qi == level1_value & rew) level1 <= 1'b0; endmodule `endif `ifdef CNT_GRAY ////////////////////////////////////////////////////////////////////// //// //// //// Versatile counter //// //// //// //// Description //// //// Versatile counter, a reconfigurable binary, gray or LFSR //// //// counter //// //// //// //// To Do: //// //// - add LFSR with more taps //// //// //// //// Author(s): //// //// - Michael Unneback, unneback@opencores.org //// //// ORSoC AB //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2009 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // GRAY counter `define MODULE cnt_gray module `BASE`MODULE ( `undef MODULE q, rst, clk); parameter length = 4; output reg [length:1] q; input rst; input clk; parameter clear_value = 0; parameter set_value = 1; parameter wrap_value = 8; parameter level1_value = 15; reg [length:1] qi; wire [length:1] q_next; assign q_next = qi + {{length-1{1'b0}},1'b1}; always @ (posedge clk or posedge rst) if (rst) qi <= {length{1'b0}}; else qi <= q_next; always @ (posedge clk or posedge rst) if (rst) q <= {length{1'b0}}; else q <= (q_next>>1) ^ q_next; endmodule `endif `ifdef CNT_GRAY_CE ////////////////////////////////////////////////////////////////////// //// //// //// Versatile counter //// //// //// //// Description //// //// Versatile counter, a reconfigurable binary, gray or LFSR //// //// counter //// //// //// //// To Do: //// //// - add LFSR with more taps //// //// //// //// Author(s): //// //// - Michael Unneback, unneback@opencores.org //// //// ORSoC AB //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2009 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // GRAY counter `define MODULE cnt_gray_ce module `BASE`MODULE ( `undef MODULE cke, q, rst, clk); parameter length = 4; input cke; output reg [length:1] q; input rst; input clk; parameter clear_value = 0; parameter set_value = 1; parameter wrap_value = 8; parameter level1_value = 15; reg [length:1] qi; wire [length:1] q_next; assign q_next = qi + {{length-1{1'b0}},1'b1}; always @ (posedge clk or posedge rst) if (rst) qi <= {length{1'b0}}; else if (cke) qi <= q_next; always @ (posedge clk or posedge rst) if (rst) q <= {length{1'b0}}; else if (cke) q <= (q_next>>1) ^ q_next; endmodule `endif `ifdef CNT_GRAY_CE_BIN ////////////////////////////////////////////////////////////////////// //// //// //// Versatile counter //// //// //// //// Description //// //// Versatile counter, a reconfigurable binary, gray or LFSR //// //// counter //// //// //// //// To Do: //// //// - add LFSR with more taps //// //// //// //// Author(s): //// //// - Michael Unneback, unneback@opencores.org //// //// ORSoC AB //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2009 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // GRAY counter `define MODULE cnt_gray_ce_bin module `BASE`MODULE ( `undef MODULE cke, q, q_bin, rst, clk); parameter length = 4; input cke; output reg [length:1] q; output [length:1] q_bin; input rst; input clk; parameter clear_value = 0; parameter set_value = 1; parameter wrap_value = 8; parameter level1_value = 15; reg [length:1] qi; wire [length:1] q_next; assign q_next = qi + {{length-1{1'b0}},1'b1}; always @ (posedge clk or posedge rst) if (rst) qi <= {length{1'b0}}; else if (cke) qi <= q_next; always @ (posedge clk or posedge rst) if (rst) q <= {length{1'b0}}; else if (cke) q <= (q_next>>1) ^ q_next; assign q_bin = qi; endmodule `endif ////////////////////////////////////////////////////////////////////// //// //// //// Versatile library, counters //// //// //// //// Description //// //// counters //// //// //// //// //// //// To Do: //// //// - add more counters //// //// //// //// Author(s): //// //// - Michael Unneback, unneback@opencores.org //// //// ORSoC AB //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2010 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// `ifdef CNT_SHREG_WRAP `define MODULE cnt_shreg_wrap module `BASE`MODULE ( q, rst, clk); `undef MODULE parameter length = 4; output reg [0:length-1] q; input rst; input clk; always @ (posedge clk or posedge rst) if (rst) q <= {1'b1,{length-1{1'b0}}}; else q <= {q[length-1],q[0:length-2]}; endmodule `endif `ifdef CNT_SHREG_CE_WRAP `define MODULE cnt_shreg_ce_wrap module `BASE`MODULE ( cke, q, rst, clk); `undef MODULE parameter length = 4; input cke; output reg [0:length-1] q; input rst; input clk; always @ (posedge clk or posedge rst) if (rst) q <= {1'b1,{length-1{1'b0}}}; else if (cke) q <= {q[length-1],q[0:length-2]}; endmodule `endif `ifdef CNT_SHREG_CE_CLEAR `define MODULE cnt_shreg_ce_clear module `BASE`MODULE ( cke, clear, q, rst, clk); `undef MODULE parameter length = 4; input cke, clear; output reg [0:length-1] q; input rst; input clk; always @ (posedge clk or posedge rst) if (rst) q <= {1'b1,{length-1{1'b0}}}; else if (cke) if (clear) q <= {1'b1,{length-1{1'b0}}}; else q <= q >> 1; endmodule `endif `ifdef CNT_SHREG_CE_CLEAR_WRAP `define MODULE cnt_shreg_ce_clear_wrap module `BASE`MODULE ( cke, clear, q, rst, clk); `undef MODULE parameter length = 4; input cke, clear; output reg [0:length-1] q; input rst; input clk; always @ (posedge clk or posedge rst) if (rst) q <= {1'b1,{length-1{1'b0}}}; else if (cke) if (clear) q <= {1'b1,{length-1{1'b0}}}; else q <= {q[length-1],q[0:length-2]}; endmodule `endif ////////////////////////////////////////////////////////////////////// //// //// //// Versatile library, memories //// //// //// //// Description //// //// memories //// //// //// //// //// //// To Do: //// //// - add more memory types //// //// //// //// Author(s): //// //// - Michael Unneback, unneback@opencores.org //// //// ORSoC AB //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2010 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// `ifdef ROM_INIT /// ROM `define MODULE rom_init module `BASE`MODULE ( adr, q, clk); `undef MODULE parameter data_width = 32; parameter addr_width = 8; parameter mem_size = 1<<addr_width; input [(addr_width-1):0] adr; output reg [(data_width-1):0] q; input clk; reg [data_width-1:0] rom [mem_size-1:0]; parameter memory_file = "vl_rom.vmem"; initial begin $readmemh(memory_file, rom); end always @ (posedge clk) q <= rom[adr]; endmodule `endif `ifdef RAM `define MODULE ram // Single port RAM module `BASE`MODULE ( d, adr, we, q, clk); `undef MODULE parameter data_width = 32; parameter addr_width = 8; parameter mem_size = 1<<addr_width; input [(data_width-1):0] d; input [(addr_width-1):0] adr; input we; output reg [(data_width-1):0] q; input clk; reg [data_width-1:0] ram [mem_size-1:0]; parameter init = 0; parameter memory_file = "vl_ram.vmem"; generate if (init) begin : init_mem initial begin $readmemh(memory_file, ram); end end endgenerate always @ (posedge clk) begin if (we) ram[adr] <= d; q <= ram[adr]; end endmodule `endif `ifdef RAM_BE `define MODULE ram_be module `BASE`MODULE ( d, adr, be, we, q, clk); `undef MODULE parameter data_width = 32; parameter addr_width = 6; parameter mem_size = 1<<addr_width; input [(data_width-1):0] d; input [(addr_width-1):0] adr; input [(data_width/8)-1:0] be; input we; output reg [(data_width-1):0] q; input clk; `ifdef SYSTEMVERILOG // use a multi-dimensional packed array //t o model individual bytes within the word logic [data_width/8-1:0][7:0] ram [0:mem_size-1];// # words = 1 << address width `else reg [data_width-1:0] ram [mem_size-1:0]; wire [data_width/8-1:0] cke; `endif parameter memory_init = 0; parameter memory_file = "vl_ram.vmem"; generate if (memory_init) begin : init_mem initial begin $readmemh(memory_file, ram); end end endgenerate `ifdef SYSTEMVERILOG always_ff@(posedge clk) begin if(we) begin if(be[3]) ram[adr][3] <= d[31:24]; if(be[2]) ram[adr][2] <= d[23:16]; if(be[1]) ram[adr][1] <= d[15:8]; if(be[0]) ram[adr][0] <= d[7:0]; end q <= ram[adr]; end `else assign cke = {data_width/8{we}} & be; genvar i; generate for (i=0;i<data_width/8;i=i+1) begin : be_ram always @ (posedge clk) if (cke[i]) ram[adr][(i+1)*8-1:i*8] <= d[(i+1)*8-1:i*8]; end endgenerate always @ (posedge clk) q <= ram[adr]; `endif `ifdef verilator // Function to access RAM (for use by Verilator). function [31:0] get_mem; // verilator public input [addr_width-1:0] addr; get_mem = ram[addr]; endfunction // get_mem // Function to write RAM (for use by Verilator). function set_mem; // verilator public input [addr_width-1:0] addr; input [data_width-1:0] data; ram[addr] = data; endfunction // set_mem `endif endmodule `endif `ifdef DPRAM_1R1W `define MODULE dpram_1r1w module `BASE`MODULE ( d_a, adr_a, we_a, clk_a, q_b, adr_b, clk_b ); `undef MODULE parameter data_width = 32; parameter addr_width = 8; parameter mem_size = 1<<addr_width; input [(data_width-1):0] d_a; input [(addr_width-1):0] adr_a; input [(addr_width-1):0] adr_b; input we_a; output [(data_width-1):0] q_b; input clk_a, clk_b; reg [(addr_width-1):0] adr_b_reg; reg [data_width-1:0] ram [mem_szie-1:0] `SYN_NO_RW_CHECK; parameter init = 0; parameter memory_file = "vl_ram.vmem"; generate if (init) begin : init_mem initial begin $readmemh(memory_file, ram); end end endgenerate always @ (posedge clk_a) if (we_a) ram[adr_a] <= d_a; always @ (posedge clk_b) adr_b_reg <= adr_b; assign q_b = ram[adr_b_reg]; endmodule `endif `ifdef DPRAM_2R1W `define MODULE dpram_2r1w module `BASE`MODULE ( d_a, q_a, adr_a, we_a, clk_a, q_b, adr_b, clk_b ); `undef MODULE parameter data_width = 32; parameter addr_width = 8; parameter mem_size = 1<<addr_width; input [(data_width-1):0] d_a; input [(addr_width-1):0] adr_a; input [(addr_width-1):0] adr_b; input we_a; output [(data_width-1):0] q_b; output reg [(data_width-1):0] q_a; input clk_a, clk_b; reg [(data_width-1):0] q_b; reg [data_width-1:0] ram [mem_szie-1:0] `SYN_NO_RW_CHECK; parameter init = 0; parameter memory_file = "vl_ram.vmem"; generate if (init) begin : init_mem initial begin $readmemh(memory_file, ram); end end endgenerate always @ (posedge clk_a) begin q_a <= ram[adr_a]; if (we_a) ram[adr_a] <= d_a; end always @ (posedge clk_b) q_b <= ram[adr_b]; endmodule `endif `ifdef DPRAM_2R2W `define MODULE dpram_2r2w module `BASE`MODULE ( d_a, q_a, adr_a, we_a, clk_a, d_b, q_b, adr_b, we_b, clk_b ); `undef MODULE parameter data_width = 32; parameter addr_width = 8; parameter mem_size = 1<<addr_width; input [(data_width-1):0] d_a; input [(addr_width-1):0] adr_a; input [(addr_width-1):0] adr_b; input we_a; output [(data_width-1):0] q_b; input [(data_width-1):0] d_b; output reg [(data_width-1):0] q_a; input we_b; input clk_a, clk_b; reg [(data_width-1):0] q_b; reg [data_width-1:0] ram [mem_size-1:0] `SYN_NO_RW_CHECK; parameter init = 0; parameter memory_file = "vl_ram.vmem"; generate if (init) begin : init_mem initial begin $readmemh(memory_file, ram); end end endgenerate always @ (posedge clk_a) begin q_a <= ram[adr_a]; if (we_a) ram[adr_a] <= d_a; end always @ (posedge clk_b) begin q_b <= ram[adr_b]; if (we_b) ram[adr_b] <= d_b; end endmodule `endif `ifdef DPRAM_BE_2R2W `define MODULE dpram_be_2r2w module `BASE`MODULE ( d_a, q_a, adr_a, be_a, we_a, clk_a, d_b, q_b, adr_b, be_b, we_b, clk_b ); `undef MODULE parameter a_data_width = 32; parameter a_addr_width = 8; parameter b_data_width = 64; //a_data_width; localparam b_addr_width = a_data_width * a_addr_width / b_data_width; localparam ratio = (a_addr_width>b_addr_width) ? (a_addr_width/b_addr_width) : (b_addr_width/a_addr_width); parameter mem_size = (a_addr_width>b_addr_width) ? (1<<b_addr_width) : (1<<a_addr_width); parameter init = 0; parameter memory_file = "vl_ram.vmem"; input [(a_data_width-1):0] d_a; input [(a_addr_width-1):0] adr_a; input [(a_data_width/8-1):0] be_a; input we_a; output reg [(a_data_width-1):0] q_a; input [(b_data_width-1):0] d_b; input [(b_addr_width-1):0] adr_b; input [(b_data_width/8-1):0] be_b; input we_b; output reg [(b_data_width-1):0] q_b; input clk_a, clk_b; `ifdef SYSTEMVERILOG // use a multi-dimensional packed array //to model individual bytes within the word generate if (a_data_width==32 & b_data_width==32) begin : dpram_3232 logic [0:3][7:0] ram [0:mem_size-1] `SYN_NO_RW_CHECK; initial if (init) $readmemh(memory_file, ram); always_ff@(posedge clk_a) begin if(we_a) begin if(be_a[3]) ram[adr_a][3] <= d_a[31:24]; if(be_a[2]) ram[adr_a][2] <= d_a[23:16]; if(be_a[1]) ram[adr_a][1] <= d_a[15:8]; if(be_a[0]) ram[adr_a][0] <= d_a[7:0]; end end always@(posedge clk_a) q_a = ram[adr_a]; always_ff@(posedge clk_b) begin if(we_b) begin if(be_b[3]) ram[adr_b][3] <= d_b[31:24]; if(be_b[2]) ram[adr_b][2] <= d_b[23:16]; if(be_b[1]) ram[adr_b][1] <= d_b[15:8]; if(be_b[0]) ram[adr_b][0] <= d_b[7:0]; end end always@(posedge clk_b) q_b = ram[adr_b]; end endgenerate generate if (a_data_width==64 & b_data_width==64) begin : dpram_6464 logic [0:7][7:0] ram [0:mem_size-1] `SYN_NO_RW_CHECK; initial if (init) $readmemh(memory_file, ram); always_ff@(posedge clk_a) begin if(we_a) begin if(be_a[7]) ram[adr_a][7] <= d_a[63:56]; if(be_a[6]) ram[adr_a][6] <= d_a[55:48]; if(be_a[5]) ram[adr_a][5] <= d_a[47:40]; if(be_a[4]) ram[adr_a][4] <= d_a[39:32]; if(be_a[3]) ram[adr_a][3] <= d_a[31:24]; if(be_a[2]) ram[adr_a][2] <= d_a[23:16]; if(be_a[1]) ram[adr_a][1] <= d_a[15:8]; if(be_a[0]) ram[adr_a][0] <= d_a[7:0]; end end always@(posedge clk_a) q_a = ram[adr_a]; always_ff@(posedge clk_b) begin if(we_b) begin if(be_b[7]) ram[adr_b][7] <= d_b[63:56]; if(be_b[6]) ram[adr_b][6] <= d_b[55:48]; if(be_b[5]) ram[adr_b][5] <= d_b[47:40]; if(be_b[4]) ram[adr_b][4] <= d_b[39:32]; if(be_b[3]) ram[adr_b][3] <= d_b[31:24]; if(be_b[2]) ram[adr_b][2] <= d_b[23:16]; if(be_b[1]) ram[adr_b][1] <= d_b[15:8]; if(be_b[0]) ram[adr_b][0] <= d_b[7:0]; end end always@(posedge clk_b) q_b = ram[adr_b]; end endgenerate generate if (a_data_width==32 & b_data_width==16) begin : dpram_3216 logic [31:0] temp; `define MODULE dpram_be_2r2w `BASE`MODULE # (.a_data_width(64), .b_data_width(64), .a_addr_width(a_addr_width), .mem_size(mem_size), .init(init), .memory_file(memory_file)) `undef MODULE dpram6464 ( .d_a(d_a), .q_a(q_a), .adr_a(adr_a), .be_a(be_a), .we_a(we_a), .clk_a(clk_a), .d_b({d_b,d_b}), .q_b(temp), .adr_b(adr_b), .be_b({be_b,be_b} & {{2{adr_b[0]}},{2{!adr_b[0]}}}), .we_b(we_b), .clk_b(clk_b) ); always_comb if (adr_b[0]) q_b = temp[31:16]; else q_b = temp[15:0]; end endgenerate generate if (a_data_width==32 & b_data_width==64) begin : dpram_3264 logic [63:0] temp; `define MODULE dpram_be_2r2w `BASE`MODULE # (.a_data_width(64), .b_data_width(64), .a_addr_width(a_addr_width), .mem_size(mem_size), .init(init), .memory_file(memory_file)) `undef MODULE dpram6464 ( .d_a({d_a,d_a}), .q_a(temp), .adr_a(adr_a[a_addr_width-1:1]), .be_a({be_a,be_a} & {{4{adr_a[0]}},{4{!adr_a[0]}}}), .we_a(we_a), .clk_a(clk_a), .d_b(d_b), .q_b(q_b), .adr_b(adr_b), .be_b(be_b), .we_b(we_b), .clk_b(clk_b) ); always_comb if (adr_a[0]) q_a = temp[63:32]; else q_a = temp[31:0]; end endgenerate `else // This modules requires SystemVerilog // at this point anyway `endif endmodule `endif `ifdef CAM // Content addresable memory, CAM `endif `ifdef FIFO_1R1W_FILL_LEVEL_SYNC // FIFO `define MODULE fifo_1r1w_fill_level_sync module `BASE`MODULE ( `undef MODULE d, wr, fifo_full, q, rd, fifo_empty, fill_level, clk, rst ); parameter data_width = 18; parameter addr_width = 4; // write side input [data_width-1:0] d; input wr; output fifo_full; // read side output [data_width-1:0] q; input rd; output fifo_empty; // common output [addr_width:0] fill_level; input rst, clk; wire [addr_width:1] wadr, radr; `define MODULE cnt_bin_ce `BASE`MODULE # ( .length(addr_width)) fifo_wr_adr( .cke(wr), .q(wadr), .rst(rst), .clk(clk)); `BASE`MODULE # (.length(addr_width)) fifo_rd_adr( .cke(rd), .q(radr), .rst(rst), .clk(clk)); `undef MODULE `define MODULE dpram_1r1w `BASE`MODULE # (.data_width(data_width), .addr_width(addr_width)) dpram ( .d_a(d), .adr_a(wadr), .we_a(wr), .clk_a(clk), .q_b(q), .adr_b(radr), .clk_b(clk)); `undef MODULE `define MODULE cnt_bin_ce_rew_q_zq_l1 `BASE`MODULE # (.length(addr_width+1), .level1_value(1<<addr_width)) fill_level_cnt( .cke(rd ^ wr), .rew(rd), .q(fill_level), .zq(fifo_empty), .level1(fifo_full), .rst(rst), .clk(clk)); `undef MODULE endmodule `endif `ifdef FIFO_2R2W_SYNC_SIMPLEX // Intended use is two small FIFOs (RX and TX typically) in one FPGA RAM resource // RAM is supposed to be larger than the two FIFOs // LFSR counters used adr pointers `define MODULE fifo_2r2w_sync_simplex module `BASE`MODULE ( `undef MODULE // a side a_d, a_wr, a_fifo_full, a_q, a_rd, a_fifo_empty, a_fill_level, // b side b_d, b_wr, b_fifo_full, b_q, b_rd, b_fifo_empty, b_fill_level, // common clk, rst ); parameter data_width = 8; parameter addr_width = 5; parameter fifo_full_level = (1<<addr_width)-1; // a side input [data_width-1:0] a_d; input a_wr; output a_fifo_full; output [data_width-1:0] a_q; input a_rd; output a_fifo_empty; output [addr_width-1:0] a_fill_level; // b side input [data_width-1:0] b_d; input b_wr; output b_fifo_full; output [data_width-1:0] b_q; input b_rd; output b_fifo_empty; output [addr_width-1:0] b_fill_level; input clk; input rst; // adr_gen wire [addr_width:1] a_wadr, a_radr; wire [addr_width:1] b_wadr, b_radr; // dpram wire [addr_width:0] a_dpram_adr, b_dpram_adr; `define MODULE cnt_lfsr_ce `BASE`MODULE # ( .length(addr_width)) fifo_a_wr_adr( .cke(a_wr), .q(a_wadr), .rst(rst), .clk(clk)); `BASE`MODULE # (.length(addr_width)) fifo_a_rd_adr( .cke(a_rd), .q(a_radr), .rst(rst), .clk(clk)); `BASE`MODULE # ( .length(addr_width)) fifo_b_wr_adr( .cke(b_wr), .q(b_wadr), .rst(rst), .clk(clk)); `BASE`MODULE # (.length(addr_width)) fifo_b_rd_adr( .cke(b_rd), .q(b_radr), .rst(rst), .clk(clk)); `undef MODULE // mux read or write adr to DPRAM assign a_dpram_adr = (a_wr) ? {1'b0,a_wadr} : {1'b1,a_radr}; assign b_dpram_adr = (b_wr) ? {1'b1,b_wadr} : {1'b0,b_radr}; `define MODULE dpram_2r2w `BASE`MODULE # (.data_width(data_width), .addr_width(addr_width+1)) dpram ( .d_a(a_d), .q_a(a_q), .adr_a(a_dpram_adr), .we_a(a_wr), .clk_a(a_clk), .d_b(b_d), .q_b(b_q), .adr_b(b_dpram_adr), .we_b(b_wr), .clk_b(b_clk)); `undef MODULE `define MODULE cnt_bin_ce_rew_zq_l1 `BASE`MODULE # (.length(addr_width), .level1_value(fifo_full_level)) a_fill_level_cnt( .cke(a_rd ^ a_wr), .rew(a_rd), .q(a_fill_level), .zq(a_fifo_empty), .level1(a_fifo_full), .rst(rst), .clk(clk)); `BASE`MODULE # (.length(addr_width), .level1_value(fifo_full_level)) b_fill_level_cnt( .cke(b_rd ^ b_wr), .rew(b_rd), .q(b_fill_level), .zq(b_fifo_empty), .level1(b_fifo_full), .rst(rst), .clk(clk)); `undef MODULE endmodule `endif `ifdef FIFO_CMP_ASYNC `define MODULE fifo_cmp_async module `BASE`MODULE ( wptr, rptr, fifo_empty, fifo_full, wclk, rclk, rst ); `undef MODULE parameter addr_width = 4; parameter N = addr_width-1; parameter Q1 = 2'b00; parameter Q2 = 2'b01; parameter Q3 = 2'b11; parameter Q4 = 2'b10; parameter going_empty = 1'b0; parameter going_full = 1'b1; input [N:0] wptr, rptr; output fifo_empty; output fifo_full; input wclk, rclk, rst; `ifndef GENERATE_DIRECTION_AS_LATCH wire direction; `endif `ifdef GENERATE_DIRECTION_AS_LATCH reg direction; `endif reg direction_set, direction_clr; wire async_empty, async_full; wire fifo_full2; wire fifo_empty2; // direction_set always @ (wptr[N:N-1] or rptr[N:N-1]) case ({wptr[N:N-1],rptr[N:N-1]}) {Q1,Q2} : direction_set <= 1'b1; {Q2,Q3} : direction_set <= 1'b1; {Q3,Q4} : direction_set <= 1'b1; {Q4,Q1} : direction_set <= 1'b1; default : direction_set <= 1'b0; endcase // direction_clear always @ (wptr[N:N-1] or rptr[N:N-1] or rst) if (rst) direction_clr <= 1'b1; else case ({wptr[N:N-1],rptr[N:N-1]}) {Q2,Q1} : direction_clr <= 1'b1; {Q3,Q2} : direction_clr <= 1'b1; {Q4,Q3} : direction_clr <= 1'b1; {Q1,Q4} : direction_clr <= 1'b1; default : direction_clr <= 1'b0; endcase `define MODULE dff_sr `ifndef GENERATE_DIRECTION_AS_LATCH `BASE`MODULE dff_sr_dir( .aclr(direction_clr), .aset(direction_set), .clock(1'b1), .data(1'b1), .q(direction)); `endif `ifdef GENERATE_DIRECTION_AS_LATCH always @ (posedge direction_set or posedge direction_clr) if (direction_clr) direction <= going_empty; else direction <= going_full; `endif assign async_empty = (wptr == rptr) && (direction==going_empty); assign async_full = (wptr == rptr) && (direction==going_full); `BASE`MODULE dff_sr_empty0( .aclr(rst), .aset(async_full), .clock(wclk), .data(async_full), .q(fifo_full2)); `BASE`MODULE dff_sr_empty1( .aclr(rst), .aset(async_full), .clock(wclk), .data(fifo_full2), .q(fifo_full)); `undef MODULE /* always @ (posedge wclk or posedge rst or posedge async_full) if (rst) {fifo_full, fifo_full2} <= 2'b00; else if (async_full) {fifo_full, fifo_full2} <= 2'b11; else {fifo_full, fifo_full2} <= {fifo_full2, async_full}; */ /* always @ (posedge rclk or posedge async_empty) if (async_empty) {fifo_empty, fifo_empty2} <= 2'b11; else {fifo_empty,fifo_empty2} <= {fifo_empty2,async_empty}; */ `define MODULE dff `BASE`MODULE # ( .reset_value(1'b1)) dff0 ( .d(async_empty), .q(fifo_empty2), .clk(rclk), .rst(async_empty)); `BASE`MODULE # ( .reset_value(1'b1)) dff1 ( .d(fifo_empty2), .q(fifo_empty), .clk(rclk), .rst(async_empty)); `undef MODULE endmodule // async_compb `endif `ifdef FIFO_1R1W_ASYNC `define MODULE fifo_1r1w_async module `BASE`MODULE ( `undef MODULE d, wr, fifo_full, wr_clk, wr_rst, q, rd, fifo_empty, rd_clk, rd_rst ); parameter data_width = 18; parameter addr_width = 4; // write side input [data_width-1:0] d; input wr; output fifo_full; input wr_clk; input wr_rst; // read side output [data_width-1:0] q; input rd; output fifo_empty; input rd_clk; input rd_rst; wire [addr_width:1] wadr, wadr_bin, radr, radr_bin; `define MODULE cnt_gray_ce_bin `BASE`MODULE # ( .length(addr_width)) fifo_wr_adr( .cke(wr), .q(wadr), .q_bin(wadr_bin), .rst(wr_rst), .clk(wr_clk)); `BASE`MODULE # (.length(addr_width)) fifo_rd_adr( .cke(rd), .q(radr), .q_bin(radr_bin), .rst(rd_rst), .clk(rd_clk)); `undef MODULE `define MODULE dpram_1r1w `BASE`MODULE # (.data_width(data_width), .addr_width(addr_width)) dpram ( .d_a(d), .adr_a(wadr_bin), .we_a(wr), .clk_a(wr_clk), .q_b(q), .adr_b(radr_bin), .clk_b(rd_clk)); `undef MODULE `define MODULE fifo_cmp_async `BASE`MODULE # (.addr_width(addr_width)) cmp ( .wptr(wadr), .rptr(radr), .fifo_empty(fifo_empty), .fifo_full(fifo_full), .wclk(wr_clk), .rclk(rd_clk), .rst(wr_rst) ); `undef MODULE endmodule `endif `ifdef FIFO_2R2W_ASYNC `define MODULE fifo_2r2w_async module `BASE`MODULE ( `undef MODULE // a side a_d, a_wr, a_fifo_full, a_q, a_rd, a_fifo_empty, a_clk, a_rst, // b side b_d, b_wr, b_fifo_full, b_q, b_rd, b_fifo_empty, b_clk, b_rst ); parameter data_width = 18; parameter addr_width = 4; // a side input [data_width-1:0] a_d; input a_wr; output a_fifo_full; output [data_width-1:0] a_q; input a_rd; output a_fifo_empty; input a_clk; input a_rst; // b side input [data_width-1:0] b_d; input b_wr; output b_fifo_full; output [data_width-1:0] b_q; input b_rd; output b_fifo_empty; input b_clk; input b_rst; `define MODULE fifo_1r1w_async `BASE`MODULE # (.data_width(data_width), .addr_width(addr_width)) vl_fifo_1r1w_async_a ( .d(a_d), .wr(a_wr), .fifo_full(a_fifo_full), .wr_clk(a_clk), .wr_rst(a_rst), .q(b_q), .rd(b_rd), .fifo_empty(b_fifo_empty), .rd_clk(b_clk), .rd_rst(b_rst) ); `BASE`MODULE # (.data_width(data_width), .addr_width(addr_width)) vl_fifo_1r1w_async_b ( .d(b_d), .wr(b_wr), .fifo_full(b_fifo_full), .wr_clk(b_clk), .wr_rst(b_rst), .q(a_q), .rd(a_rd), .fifo_empty(a_fifo_empty), .rd_clk(a_clk), .rd_rst(a_rst) ); `undef MODULE endmodule `endif `ifdef FIFO_2R2W_ASYNC_SIMPLEX `define MODULE fifo_2r2w_async_simplex module `BASE`MODULE ( `undef MODULE // a side a_d, a_wr, a_fifo_full, a_q, a_rd, a_fifo_empty, a_clk, a_rst, // b side b_d, b_wr, b_fifo_full, b_q, b_rd, b_fifo_empty, b_clk, b_rst ); parameter data_width = 18; parameter addr_width = 4; // a side input [data_width-1:0] a_d; input a_wr; output a_fifo_full; output [data_width-1:0] a_q; input a_rd; output a_fifo_empty; input a_clk; input a_rst; // b side input [data_width-1:0] b_d; input b_wr; output b_fifo_full; output [data_width-1:0] b_q; input b_rd; output b_fifo_empty; input b_clk; input b_rst; // adr_gen wire [addr_width:1] a_wadr, a_wadr_bin, a_radr, a_radr_bin; wire [addr_width:1] b_wadr, b_wadr_bin, b_radr, b_radr_bin; // dpram wire [addr_width:0] a_dpram_adr, b_dpram_adr; `define MODULE cnt_gray_ce_bin `BASE`MODULE # ( .length(addr_width)) fifo_a_wr_adr( .cke(a_wr), .q(a_wadr), .q_bin(a_wadr_bin), .rst(a_rst), .clk(a_clk)); `BASE`MODULE # (.length(addr_width)) fifo_a_rd_adr( .cke(a_rd), .q(a_radr), .q_bin(a_radr_bin), .rst(a_rst), .clk(a_clk)); `BASE`MODULE # ( .length(addr_width)) fifo_b_wr_adr( .cke(b_wr), .q(b_wadr), .q_bin(b_wadr_bin), .rst(b_rst), .clk(b_clk)); `BASE`MODULE # (.length(addr_width)) fifo_b_rd_adr( .cke(b_rd), .q(b_radr), .q_bin(b_radr_bin), .rst(b_rst), .clk(b_clk)); `undef MODULE // mux read or write adr to DPRAM assign a_dpram_adr = (a_wr) ? {1'b0,a_wadr_bin} : {1'b1,a_radr_bin}; assign b_dpram_adr = (b_wr) ? {1'b1,b_wadr_bin} : {1'b0,b_radr_bin}; `define MODULE dpram_2r2w `BASE`MODULE # (.data_width(data_width), .addr_width(addr_width+1)) dpram ( .d_a(a_d), .q_a(a_q), .adr_a(a_dpram_adr), .we_a(a_wr), .clk_a(a_clk), .d_b(b_d), .q_b(b_q), .adr_b(b_dpram_adr), .we_b(b_wr), .clk_b(b_clk)); `undef MODULE `define MODULE fifo_cmp_async `BASE`MODULE # (.addr_width(addr_width)) cmp1 ( .wptr(a_wadr), .rptr(b_radr), .fifo_empty(b_fifo_empty), .fifo_full(a_fifo_full), .wclk(a_clk), .rclk(b_clk), .rst(a_rst) ); `BASE`MODULE # (.addr_width(addr_width)) cmp2 ( .wptr(b_wadr), .rptr(a_radr), .fifo_empty(a_fifo_empty), .fifo_full(b_fifo_full), .wclk(b_clk), .rclk(a_clk), .rst(b_rst) ); `undef MODULE endmodule `endif `ifdef REG_FILE `define MODULE reg_file module `BASE`MODULE ( `undef MODULE a1, a2, a3, wd3, we3, rd1, rd2, clk ); parameter data_width = 32; parameter addr_width = 5; input [addr_width-1:0] a1, a2, a3; input [data_width-1:0] wd3; input we3; output [data_width-1:0] rd1, rd2; input clk; `ifdef ACTEL reg [data_width-1:0] wd3_reg; reg [addr_width-1:0] a1_reg, a2_reg, a3_reg; reg we3_reg; reg [data_width-1:0] ram1 [(1<<addr_width)-1:0] `SYN_NO_RW_CHECK; reg [data_width-1:0] ram2 [(1<<addr_width)-1:0] `SYN_NO_RW_CHECK; always @ (posedge clk or posedge rst) if (rst) {wd3_reg, a3_reg, we3_reg} <= {(data_width+addr_width+1){1'b0}}; else {wd3_reg, a3_reg, we3_reg} <= {wd3,a3,wd3}; always @ (negedge clk) if (we3_reg) ram1[a3_reg] <= wd3; always @ (posedge clk) a1_reg <= a1; assign rd1 = ram1[a1_reg]; always @ (negedge clk) if (we3_reg) ram2[a3_reg] <= wd3; always @ (posedge clk) a2_reg <= a2; assign rd2 = ram2[a2_reg]; `else `define MODULE dpram_1r1w `BASE`MODULE # ( .data_width(data_width), .addr_width(addr_width)) ram1 ( .d_a(wd3), .adr_a(a3), .we_a(we3), .clk_a(clk), .q_b(rd1), .adr_b(a1), .clk_b(clk) ); `BASE`MODULE # ( .data_width(data_width), .addr_width(addr_width)) ram2 ( .d_a(wd3), .adr_a(a3), .we_a(we3), .clk_a(clk), .q_b(rd2), .adr_b(a2), .clk_b(clk) ); `undef MODULE `endif endmodule `endif ////////////////////////////////////////////////////////////////////// //// //// //// Versatile library, wishbone stuff //// //// //// //// Description //// //// Wishbone compliant modules //// //// //// //// //// //// To Do: //// //// - //// //// //// //// Author(s): //// //// - Michael Unneback, unneback@opencores.org //// //// ORSoC AB //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2010 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// `ifdef WB_ADR_INC // async wb3 - wb3 bridge `timescale 1ns/1ns `define MODULE wb_adr_inc module `BASE`MODULE ( cyc_i, stb_i, cti_i, bte_i, adr_i, we_i, ack_o, adr_o, clk, rst); `undef MODULE parameter adr_width = 10; parameter max_burst_width = 4; input cyc_i, stb_i, we_i; input [2:0] cti_i; input [1:0] bte_i; input [adr_width-1:0] adr_i; output [adr_width-1:0] adr_o; output ack_o; input clk, rst; reg [adr_width-1:0] adr; wire [max_burst_width-1:0] to_adr; reg [max_burst_width-1:0] last_adr; reg last_cycle; localparam idle_or_eoc = 1'b0; localparam cyc_or_ws = 1'b1; always @ (posedge clk or posedge rst) if (rst) last_adr <= {max_burst_width{1'b0}}; else if (stb_i) last_adr <=adr_o[max_burst_width-1:0]; generate if (max_burst_width==0) begin : inst_0 reg ack_o; assign adr_o = adr_i; always @ (posedge clk or posedge rst) if (rst) ack_o <= 1'b0; else ack_o <= cyc_i & stb_i & !ack_o; end else begin always @ (posedge clk or posedge rst) if (rst) last_cycle <= idle_or_eoc; else last_cycle <= (!cyc_i) ? idle_or_eoc : //idle (cyc_i & ack_o & (cti_i==3'b000 | cti_i==3'b111)) ? idle_or_eoc : // eoc (cyc_i & !stb_i) ? cyc_or_ws : //ws cyc_or_ws; // cyc assign to_adr = (last_cycle==idle_or_eoc) ? adr_i[max_burst_width-1:0] : adr[max_burst_width-1:0]; assign adr_o[max_burst_width-1:0] = (we_i) ? adr_i[max_burst_width-1:0] : (!stb_i) ? last_adr : (last_cycle==idle_or_eoc) ? adr_i[max_burst_width-1:0] : adr[max_burst_width-1:0]; assign ack_o = (last_cycle==cyc_or_ws) & stb_i; end endgenerate generate if (max_burst_width==2) begin : inst_2 always @ (posedge clk or posedge rst) if (rst) adr <= 2'h0; else if (cyc_i & stb_i) adr[1:0] <= to_adr[1:0] + 2'd1; else adr <= to_adr[1:0]; end endgenerate generate if (max_burst_width==3) begin : inst_3 always @ (posedge clk or posedge rst) if (rst) adr <= 3'h0; else if (cyc_i & stb_i) case (bte_i) 2'b01: adr[2:0] <= {to_adr[2],to_adr[1:0] + 2'd1}; default: adr[3:0] <= to_adr[2:0] + 3'd1; endcase else adr <= to_adr[2:0]; end endgenerate generate if (max_burst_width==4) begin : inst_4 always @ (posedge clk or posedge rst) if (rst) adr <= 4'h0; else if (stb_i) // | (!stb_i & last_cycle!=ws)) // for !stb_i restart with adr_i +1, only inc once case (bte_i) 2'b01: adr[3:0] <= {to_adr[3:2],to_adr[1:0] + 2'd1}; 2'b10: adr[3:0] <= {to_adr[3],to_adr[2:0] + 3'd1}; default: adr[3:0] <= to_adr + 4'd1; endcase else adr <= to_adr[3:0]; end endgenerate generate if (adr_width > max_burst_width) begin : pass_through assign adr_o[adr_width-1:max_burst_width] = adr_i[adr_width-1:max_burst_width]; end endgenerate endmodule `endif `ifdef WB3WB3_BRIDGE // async wb3 - wb3 bridge `timescale 1ns/1ns `define MODULE wb3wb3_bridge module `BASE`MODULE ( `undef MODULE // wishbone slave side wbs_dat_i, wbs_adr_i, wbs_sel_i, wbs_bte_i, wbs_cti_i, wbs_we_i, wbs_cyc_i, wbs_stb_i, wbs_dat_o, wbs_ack_o, wbs_clk, wbs_rst, // wishbone master side wbm_dat_o, wbm_adr_o, wbm_sel_o, wbm_bte_o, wbm_cti_o, wbm_we_o, wbm_cyc_o, wbm_stb_o, wbm_dat_i, wbm_ack_i, wbm_clk, wbm_rst); parameter style = "FIFO"; // valid: simple, FIFO parameter addr_width = 4; input [31:0] wbs_dat_i; input [31:2] wbs_adr_i; input [3:0] wbs_sel_i; input [1:0] wbs_bte_i; input [2:0] wbs_cti_i; input wbs_we_i, wbs_cyc_i, wbs_stb_i; output [31:0] wbs_dat_o; output wbs_ack_o; input wbs_clk, wbs_rst; output [31:0] wbm_dat_o; output reg [31:2] wbm_adr_o; output [3:0] wbm_sel_o; output reg [1:0] wbm_bte_o; output reg [2:0] wbm_cti_o; output reg wbm_we_o; output wbm_cyc_o; output wbm_stb_o; input [31:0] wbm_dat_i; input wbm_ack_i; input wbm_clk, wbm_rst; // bte parameter linear = 2'b00; parameter wrap4 = 2'b01; parameter wrap8 = 2'b10; parameter wrap16 = 2'b11; // cti parameter classic = 3'b000; parameter incburst = 3'b010; parameter endofburst = 3'b111; localparam wbs_adr = 1'b0; localparam wbs_data = 1'b1; localparam wbm_adr0 = 2'b00; localparam wbm_adr1 = 2'b01; localparam wbm_data = 2'b10; localparam wbm_data_wait = 2'b11; reg [1:0] wbs_bte_reg; reg wbs; wire wbs_eoc_alert, wbm_eoc_alert; reg wbs_eoc, wbm_eoc; reg [1:0] wbm; wire [1:16] wbs_count, wbm_count; wire [35:0] a_d, a_q, b_d, b_q; wire a_wr, a_rd, a_fifo_full, a_fifo_empty, b_wr, b_rd, b_fifo_full, b_fifo_empty; reg a_rd_reg; wire b_rd_adr, b_rd_data; wire b_rd_data_reg; wire [35:0] temp; `define WE 5 `define BTE 4:3 `define CTI 2:0 assign wbs_eoc_alert = (wbs_bte_reg==wrap4 & wbs_count[3]) | (wbs_bte_reg==wrap8 & wbs_count[7]) | (wbs_bte_reg==wrap16 & wbs_count[15]); always @ (posedge wbs_clk or posedge wbs_rst) if (wbs_rst) wbs_eoc <= 1'b0; else if (wbs==wbs_adr & wbs_stb_i & !a_fifo_full) wbs_eoc <= (wbs_bte_i==linear) | (wbs_cti_i==3'b111); else if (wbs_eoc_alert & (a_rd | a_wr)) wbs_eoc <= 1'b1; `define MODULE cnt_shreg_ce_clear `BASE`MODULE # ( .length(16)) `undef MODULE cnt0 ( .cke(wbs_ack_o), .clear(wbs_eoc), .q(wbs_count), .rst(wbs_rst), .clk(wbs_clk)); always @ (posedge wbs_clk or posedge wbs_rst) if (wbs_rst) wbs <= wbs_adr; else if ((wbs==wbs_adr) & wbs_cyc_i & wbs_stb_i & a_fifo_empty) wbs <= wbs_data; else if (wbs_eoc & wbs_ack_o) wbs <= wbs_adr; // wbs FIFO assign a_d = (wbs==wbs_adr) ? {wbs_adr_i[31:2],wbs_we_i,((wbs_cti_i==3'b111) ? {2'b00,3'b000} : {wbs_bte_i,wbs_cti_i})} : {wbs_dat_i,wbs_sel_i}; assign a_wr = (wbs==wbs_adr) ? wbs_cyc_i & wbs_stb_i & a_fifo_empty : (wbs==wbs_data) ? wbs_we_i & wbs_stb_i & !a_fifo_full : 1'b0; assign a_rd = !a_fifo_empty; always @ (posedge wbs_clk or posedge wbs_rst) if (wbs_rst) a_rd_reg <= 1'b0; else a_rd_reg <= a_rd; assign wbs_ack_o = a_rd_reg | (a_wr & wbs==wbs_data); assign wbs_dat_o = a_q[35:4]; always @ (posedge wbs_clk or posedge wbs_rst) if (wbs_rst) wbs_bte_reg <= 2'b00; else wbs_bte_reg <= wbs_bte_i; // wbm FIFO assign wbm_eoc_alert = (wbm_bte_o==wrap4 & wbm_count[3]) | (wbm_bte_o==wrap8 & wbm_count[7]) | (wbm_bte_o==wrap16 & wbm_count[15]); always @ (posedge wbm_clk or posedge wbm_rst) if (wbm_rst) wbm_eoc <= 1'b0; else if (wbm==wbm_adr0 & !b_fifo_empty) wbm_eoc <= b_q[`BTE] == linear; else if (wbm_eoc_alert & wbm_ack_i) wbm_eoc <= 1'b1; always @ (posedge wbm_clk or posedge wbm_rst) if (wbm_rst) wbm <= wbm_adr0; else /* if ((wbm==wbm_adr0 & !b_fifo_empty) | (wbm==wbm_adr1 & !b_fifo_empty & wbm_we_o) | (wbm==wbm_adr1 & !wbm_we_o) | (wbm==wbm_data & wbm_ack_i & wbm_eoc)) wbm <= {wbm[0],!(wbm[1] ^ wbm[0])}; // count sequence 00,01,10 */ case (wbm) wbm_adr0: if (!b_fifo_empty) wbm <= wbm_adr1; wbm_adr1: if (!wbm_we_o | (!b_fifo_empty & wbm_we_o)) wbm <= wbm_data; wbm_data: if (wbm_ack_i & wbm_eoc) wbm <= wbm_adr0; else if (b_fifo_empty & wbm_we_o & wbm_ack_i) wbm <= wbm_data_wait; wbm_data_wait: if (!b_fifo_empty) wbm <= wbm_data; endcase assign b_d = {wbm_dat_i,4'b1111}; assign b_wr = !wbm_we_o & wbm_ack_i; assign b_rd_adr = (wbm==wbm_adr0 & !b_fifo_empty); assign b_rd_data = (wbm==wbm_adr1 & !b_fifo_empty & wbm_we_o) ? 1'b1 : // b_q[`WE] (wbm==wbm_data & !b_fifo_empty & wbm_we_o & wbm_ack_i & !wbm_eoc) ? 1'b1 : (wbm==wbm_data_wait & !b_fifo_empty) ? 1'b1 : 1'b0; assign b_rd = b_rd_adr | b_rd_data; `define MODULE dff `BASE`MODULE dff1 ( .d(b_rd_data), .q(b_rd_data_reg), .clk(wbm_clk), .rst(wbm_rst)); `undef MODULE `define MODULE dff_ce `BASE`MODULE # ( .width(36)) dff2 ( .d(b_q), .ce(b_rd_data_reg), .q(temp), .clk(wbm_clk), .rst(wbm_rst)); `undef MODULE assign {wbm_dat_o,wbm_sel_o} = (b_rd_data_reg) ? b_q : temp; `define MODULE cnt_shreg_ce_clear `BASE`MODULE # ( .length(16)) `undef MODULE cnt1 ( .cke(wbm_ack_i), .clear(wbm_eoc), .q(wbm_count), .rst(wbm_rst), .clk(wbm_clk)); assign wbm_cyc_o = (wbm==wbm_data | wbm==wbm_data_wait); assign wbm_stb_o = (wbm==wbm_data); always @ (posedge wbm_clk or posedge wbm_rst) if (wbm_rst) {wbm_adr_o,wbm_we_o,wbm_bte_o,wbm_cti_o} <= {30'h0,1'b0,linear,classic}; else begin if (wbm==wbm_adr0 & !b_fifo_empty) {wbm_adr_o,wbm_we_o,wbm_bte_o,wbm_cti_o} <= b_q; else if (wbm_eoc_alert & wbm_ack_i) wbm_cti_o <= endofburst; end //async_fifo_dw_simplex_top `define MODULE fifo_2r2w_async_simplex `BASE`MODULE `undef MODULE # ( .data_width(36), .addr_width(addr_width)) fifo ( // a side .a_d(a_d), .a_wr(a_wr), .a_fifo_full(a_fifo_full), .a_q(a_q), .a_rd(a_rd), .a_fifo_empty(a_fifo_empty), .a_clk(wbs_clk), .a_rst(wbs_rst), // b side .b_d(b_d), .b_wr(b_wr), .b_fifo_full(b_fifo_full), .b_q(b_q), .b_rd(b_rd), .b_fifo_empty(b_fifo_empty), .b_clk(wbm_clk), .b_rst(wbm_rst) ); endmodule `undef WE `undef BTE `undef CTI `endif `ifdef WB3AVALON_BRIDGE `define MODULE wb3avalon_bridge module `BASE`MODULE ( `undef MODULE // wishbone slave side wbs_dat_i, wbs_adr_i, wbs_sel_i, wbs_bte_i, wbs_cti_i, wbs_we_i, wbs_cyc_i, wbs_stb_i, wbs_dat_o, wbs_ack_o, wbs_clk, wbs_rst, // avalon master side readdata, readdatavalid, address, read, be, write, burstcount, writedata, waitrequest, beginbursttransfer, clk, rst); parameter linewrapburst = 1'b0; input [31:0] wbs_dat_i; input [31:2] wbs_adr_i; input [3:0] wbs_sel_i; input [1:0] wbs_bte_i; input [2:0] wbs_cti_i; input wbs_we_i; input wbs_cyc_i; input wbs_stb_i; output [31:0] wbs_dat_o; output wbs_ack_o; input wbs_clk, wbs_rst; input [31:0] readdata; output [31:0] writedata; output [31:2] address; output [3:0] be; output write; output read; output beginbursttransfer; output [3:0] burstcount; input readdatavalid; input waitrequest; input clk; input rst; wire [1:0] wbm_bte_o; wire [2:0] wbm_cti_o; wire wbm_we_o, wbm_cyc_o, wbm_stb_o, wbm_ack_i; reg last_cyc; reg [3:0] counter; reg read_busy; always @ (posedge clk or posedge rst) if (rst) last_cyc <= 1'b0; else last_cyc <= wbm_cyc_o; always @ (posedge clk or posedge rst) if (rst) read_busy <= 1'b0; else if (read & !waitrequest) read_busy <= 1'b1; else if (wbm_ack_i & wbm_cti_o!=3'b010) read_busy <= 1'b0; assign read = wbm_cyc_o & wbm_stb_o & !wbm_we_o & !read_busy; assign beginbursttransfer = (!last_cyc & wbm_cyc_o) & wbm_cti_o==3'b010; assign burstcount = (wbm_bte_o==2'b01) ? 4'd4 : (wbm_bte_o==2'b10) ? 4'd8 : (wbm_bte_o==2'b11) ? 4'd16: 4'd1; assign wbm_ack_i = (readdatavalid) | (write & !waitrequest); always @ (posedge clk or posedge rst) if (rst) begin counter <= 4'd0; end else if (wbm_we_o) begin if (!waitrequest & !last_cyc & wbm_cyc_o) begin counter <= burstcount -4'd1; end else if (waitrequest & !last_cyc & wbm_cyc_o) begin counter <= burstcount; end else if (!waitrequest & wbm_stb_o) begin counter <= counter - 4'd1; end end assign write = wbm_cyc_o & wbm_stb_o & wbm_we_o & counter!=4'd0; `define MODULE wb3wb3_bridge `BASE`MODULE wbwb3inst ( `undef MODULE // wishbone slave side .wbs_dat_i(wbs_dat_i), .wbs_adr_i(wbs_adr_i), .wbs_sel_i(wbs_sel_i), .wbs_bte_i(wbs_bte_i), .wbs_cti_i(wbs_cti_i), .wbs_we_i(wbs_we_i), .wbs_cyc_i(wbs_cyc_i), .wbs_stb_i(wbs_stb_i), .wbs_dat_o(wbs_dat_o), .wbs_ack_o(wbs_ack_o), .wbs_clk(wbs_clk), .wbs_rst(wbs_rst), // wishbone master side .wbm_dat_o(writedata), .wbm_adr_o(address), .wbm_sel_o(be), .wbm_bte_o(wbm_bte_o), .wbm_cti_o(wbm_cti_o), .wbm_we_o(wbm_we_o), .wbm_cyc_o(wbm_cyc_o), .wbm_stb_o(wbm_stb_o), .wbm_dat_i(readdata), .wbm_ack_i(wbm_ack_i), .wbm_clk(clk), .wbm_rst(rst)); endmodule `endif `ifdef WB3_ARBITER_TYPE1 `define MODULE wb3_arbiter_type1 module `BASE`MODULE ( `undef MODULE wbm_dat_o, wbm_adr_o, wbm_sel_o, wbm_cti_o, wbm_bte_o, wbm_we_o, wbm_stb_o, wbm_cyc_o, wbm_dat_i, wbm_ack_i, wbm_err_i, wbm_rty_i, wbs_dat_i, wbs_adr_i, wbs_sel_i, wbs_cti_i, wbs_bte_i, wbs_we_i, wbs_stb_i, wbs_cyc_i, wbs_dat_o, wbs_ack_o, wbs_err_o, wbs_rty_o, wb_clk, wb_rst ); parameter nr_of_ports = 3; parameter adr_size = 26; parameter adr_lo = 2; parameter dat_size = 32; parameter sel_size = dat_size/8; localparam aw = (adr_size - adr_lo) * nr_of_ports; localparam dw = dat_size * nr_of_ports; localparam sw = sel_size * nr_of_ports; localparam cw = 3 * nr_of_ports; localparam bw = 2 * nr_of_ports; input [dw-1:0] wbm_dat_o; input [aw-1:0] wbm_adr_o; input [sw-1:0] wbm_sel_o; input [cw-1:0] wbm_cti_o; input [bw-1:0] wbm_bte_o; input [nr_of_ports-1:0] wbm_we_o, wbm_stb_o, wbm_cyc_o; output [dw-1:0] wbm_dat_i; output [nr_of_ports-1:0] wbm_ack_i, wbm_err_i, wbm_rty_i; output [dat_size-1:0] wbs_dat_i; output [adr_size-1:adr_lo] wbs_adr_i; output [sel_size-1:0] wbs_sel_i; output [2:0] wbs_cti_i; output [1:0] wbs_bte_i; output wbs_we_i, wbs_stb_i, wbs_cyc_i; input [dat_size-1:0] wbs_dat_o; input wbs_ack_o, wbs_err_o, wbs_rty_o; input wb_clk, wb_rst; reg [nr_of_ports-1:0] select; wire [nr_of_ports-1:0] state; wire [nr_of_ports-1:0] eoc; // end-of-cycle wire [nr_of_ports-1:0] sel; wire idle; genvar i; assign idle = !(|state); generate if (nr_of_ports == 2) begin wire [2:0] wbm1_cti_o, wbm0_cti_o; assign {wbm1_cti_o,wbm0_cti_o} = wbm_cti_o; //assign select = (idle) ? {wbm_cyc_o[1],!wbm_cyc_o[1] & wbm_cyc_o[0]} : {nr_of_ports{1'b0}}; always @ (idle or wbm_cyc_o) if (idle) casex (wbm_cyc_o) 2'b1x : select = 2'b10; 2'b01 : select = 2'b01; default : select = {nr_of_ports{1'b0}}; endcase else select = {nr_of_ports{1'b0}}; assign eoc[1] = (wbm_ack_i[1] & (wbm1_cti_o == 3'b000 | wbm1_cti_o == 3'b111)) | !wbm_cyc_o[1]; assign eoc[0] = (wbm_ack_i[0] & (wbm0_cti_o == 3'b000 | wbm0_cti_o == 3'b111)) | !wbm_cyc_o[0]; end endgenerate generate if (nr_of_ports == 3) begin wire [2:0] wbm2_cti_o, wbm1_cti_o, wbm0_cti_o; assign {wbm2_cti_o,wbm1_cti_o,wbm0_cti_o} = wbm_cti_o; always @ (idle or wbm_cyc_o) if (idle) casex (wbm_cyc_o) 3'b1xx : select = 3'b100; 3'b01x : select = 3'b010; 3'b001 : select = 3'b001; default : select = {nr_of_ports{1'b0}}; endcase else select = {nr_of_ports{1'b0}}; // assign select = (idle) ? {wbm_cyc_o[2],!wbm_cyc_o[2] & wbm_cyc_o[1],wbm_cyc_o[2:1]==2'b00 & wbm_cyc_o[0]} : {nr_of_ports{1'b0}}; assign eoc[2] = (wbm_ack_i[2] & (wbm2_cti_o == 3'b000 | wbm2_cti_o == 3'b111)) | !wbm_cyc_o[2]; assign eoc[1] = (wbm_ack_i[1] & (wbm1_cti_o == 3'b000 | wbm1_cti_o == 3'b111)) | !wbm_cyc_o[1]; assign eoc[0] = (wbm_ack_i[0] & (wbm0_cti_o == 3'b000 | wbm0_cti_o == 3'b111)) | !wbm_cyc_o[0]; end endgenerate generate if (nr_of_ports == 4) begin wire [2:0] wbm3_cti_o, wbm2_cti_o, wbm1_cti_o, wbm0_cti_o; assign {wbm3_cti_o, wbm2_cti_o,wbm1_cti_o,wbm0_cti_o} = wbm_cti_o; //assign select = (idle) ? {wbm_cyc_o[3],!wbm_cyc_o[3] & wbm_cyc_o[2],wbm_cyc_o[3:2]==2'b00 & wbm_cyc_o[1],wbm_cyc_o[3:1]==3'b000 & wbm_cyc_o[0]} : {nr_of_ports{1'b0}}; always @ (idle or wbm_cyc_o) if (idle) casex (wbm_cyc_o) 4'b1xxx : select = 4'b1000; 4'b01xx : select = 4'b0100; 4'b001x : select = 4'b0010; 4'b0001 : select = 4'b0001; default : select = {nr_of_ports{1'b0}}; endcase else select = {nr_of_ports{1'b0}}; assign eoc[3] = (wbm_ack_i[3] & (wbm3_cti_o == 3'b000 | wbm3_cti_o == 3'b111)) | !wbm_cyc_o[3]; assign eoc[2] = (wbm_ack_i[2] & (wbm2_cti_o == 3'b000 | wbm2_cti_o == 3'b111)) | !wbm_cyc_o[2]; assign eoc[1] = (wbm_ack_i[1] & (wbm1_cti_o == 3'b000 | wbm1_cti_o == 3'b111)) | !wbm_cyc_o[1]; assign eoc[0] = (wbm_ack_i[0] & (wbm0_cti_o == 3'b000 | wbm0_cti_o == 3'b111)) | !wbm_cyc_o[0]; end endgenerate generate if (nr_of_ports == 5) begin wire [2:0] wbm4_cti_o, wbm3_cti_o, wbm2_cti_o, wbm1_cti_o, wbm0_cti_o; assign {wbm4_cti_o, wbm3_cti_o, wbm2_cti_o,wbm1_cti_o,wbm0_cti_o} = wbm_cti_o; //assign select = (idle) ? {wbm_cyc_o[3],!wbm_cyc_o[3] & wbm_cyc_o[2],wbm_cyc_o[3:2]==2'b00 & wbm_cyc_o[1],wbm_cyc_o[3:1]==3'b000 & wbm_cyc_o[0]} : {nr_of_ports{1'b0}}; always @ (idle or wbm_cyc_o) if (idle) casex (wbm_cyc_o) 5'b1xxxx : select = 5'b10000; 5'b01xxx : select = 5'b01000; 5'b001xx : select = 5'b00100; 5'b0001x : select = 5'b00010; 5'b00001 : select = 5'b00001; default : select = {nr_of_ports{1'b0}}; endcase else select = {nr_of_ports{1'b0}}; assign eoc[4] = (wbm_ack_i[4] & (wbm4_cti_o == 3'b000 | wbm4_cti_o == 3'b111)) | !wbm_cyc_o[4]; assign eoc[3] = (wbm_ack_i[3] & (wbm3_cti_o == 3'b000 | wbm3_cti_o == 3'b111)) | !wbm_cyc_o[3]; assign eoc[2] = (wbm_ack_i[2] & (wbm2_cti_o == 3'b000 | wbm2_cti_o == 3'b111)) | !wbm_cyc_o[2]; assign eoc[1] = (wbm_ack_i[1] & (wbm1_cti_o == 3'b000 | wbm1_cti_o == 3'b111)) | !wbm_cyc_o[1]; assign eoc[0] = (wbm_ack_i[0] & (wbm0_cti_o == 3'b000 | wbm0_cti_o == 3'b111)) | !wbm_cyc_o[0]; end endgenerate generate if (nr_of_ports == 6) begin wire [2:0] wbm5_cti_o, wbm4_cti_o, wbm3_cti_o, wbm2_cti_o, wbm1_cti_o, wbm0_cti_o; assign {wbm5_cti_o, wbm4_cti_o, wbm3_cti_o, wbm2_cti_o,wbm1_cti_o,wbm0_cti_o} = wbm_cti_o; //assign select = (idle) ? {wbm_cyc_o[3],!wbm_cyc_o[3] & wbm_cyc_o[2],wbm_cyc_o[3:2]==2'b00 & wbm_cyc_o[1],wbm_cyc_o[3:1]==3'b000 & wbm_cyc_o[0]} : {nr_of_ports{1'b0}}; always @ (idle or wbm_cyc_o) if (idle) casex (wbm_cyc_o) 6'b1xxxxx : select = 6'b100000; 6'b01xxxx : select = 6'b010000; 6'b001xxx : select = 6'b001000; 6'b0001xx : select = 6'b000100; 6'b00001x : select = 6'b000010; 6'b000001 : select = 6'b000001; default : select = {nr_of_ports{1'b0}}; endcase else select = {nr_of_ports{1'b0}}; assign eoc[5] = (wbm_ack_i[5] & (wbm5_cti_o == 3'b000 | wbm5_cti_o == 3'b111)) | !wbm_cyc_o[5]; assign eoc[4] = (wbm_ack_i[4] & (wbm4_cti_o == 3'b000 | wbm4_cti_o == 3'b111)) | !wbm_cyc_o[4]; assign eoc[3] = (wbm_ack_i[3] & (wbm3_cti_o == 3'b000 | wbm3_cti_o == 3'b111)) | !wbm_cyc_o[3]; assign eoc[2] = (wbm_ack_i[2] & (wbm2_cti_o == 3'b000 | wbm2_cti_o == 3'b111)) | !wbm_cyc_o[2]; assign eoc[1] = (wbm_ack_i[1] & (wbm1_cti_o == 3'b000 | wbm1_cti_o == 3'b111)) | !wbm_cyc_o[1]; assign eoc[0] = (wbm_ack_i[0] & (wbm0_cti_o == 3'b000 | wbm0_cti_o == 3'b111)) | !wbm_cyc_o[0]; end endgenerate generate if (nr_of_ports == 7) begin wire [2:0] wbm6_cti_o, wbm5_cti_o, wbm4_cti_o, wbm3_cti_o, wbm2_cti_o, wbm1_cti_o, wbm0_cti_o; assign {wbm6_cti_o, wbm5_cti_o, wbm4_cti_o, wbm3_cti_o, wbm2_cti_o,wbm1_cti_o,wbm0_cti_o} = wbm_cti_o; //assign select = (idle) ? {wbm_cyc_o[3],!wbm_cyc_o[3] & wbm_cyc_o[2],wbm_cyc_o[3:2]==2'b00 & wbm_cyc_o[1],wbm_cyc_o[3:1]==3'b000 & wbm_cyc_o[0]} : {nr_of_ports{1'b0}}; always @ (idle or wbm_cyc_o) if (idle) casex (wbm_cyc_o) 7'b1xxxxxx : select = 7'b1000000; 7'b01xxxxx : select = 7'b0100000; 7'b001xxxx : select = 7'b0010000; 7'b0001xxx : select = 7'b0001000; 7'b00001xx : select = 7'b0000100; 7'b000001x : select = 7'b0000010; 7'b0000001 : select = 7'b0000001; default : select = {nr_of_ports{1'b0}}; endcase else select = {nr_of_ports{1'b0}}; assign eoc[6] = (wbm_ack_i[6] & (wbm6_cti_o == 3'b000 | wbm6_cti_o == 3'b111)) | !wbm_cyc_o[6]; assign eoc[5] = (wbm_ack_i[5] & (wbm5_cti_o == 3'b000 | wbm5_cti_o == 3'b111)) | !wbm_cyc_o[5]; assign eoc[4] = (wbm_ack_i[4] & (wbm4_cti_o == 3'b000 | wbm4_cti_o == 3'b111)) | !wbm_cyc_o[4]; assign eoc[3] = (wbm_ack_i[3] & (wbm3_cti_o == 3'b000 | wbm3_cti_o == 3'b111)) | !wbm_cyc_o[3]; assign eoc[2] = (wbm_ack_i[2] & (wbm2_cti_o == 3'b000 | wbm2_cti_o == 3'b111)) | !wbm_cyc_o[2]; assign eoc[1] = (wbm_ack_i[1] & (wbm1_cti_o == 3'b000 | wbm1_cti_o == 3'b111)) | !wbm_cyc_o[1]; assign eoc[0] = (wbm_ack_i[0] & (wbm0_cti_o == 3'b000 | wbm0_cti_o == 3'b111)) | !wbm_cyc_o[0]; end endgenerate generate if (nr_of_ports == 8) begin wire [2:0] wbm7_cti_o, wbm6_cti_o, wbm5_cti_o, wbm4_cti_o, wbm3_cti_o, wbm2_cti_o, wbm1_cti_o, wbm0_cti_o; assign {wbm7_cti_o, wbm6_cti_o, wbm5_cti_o, wbm4_cti_o, wbm3_cti_o, wbm2_cti_o,wbm1_cti_o,wbm0_cti_o} = wbm_cti_o; //assign select = (idle) ? {wbm_cyc_o[3],!wbm_cyc_o[3] & wbm_cyc_o[2],wbm_cyc_o[3:2]==2'b00 & wbm_cyc_o[1],wbm_cyc_o[3:1]==3'b000 & wbm_cyc_o[0]} : {nr_of_ports{1'b0}}; always @ (idle or wbm_cyc_o) if (idle) casex (wbm_cyc_o) 8'b1xxxxxxx : select = 8'b10000000; 8'b01xxxxxx : select = 8'b01000000; 8'b001xxxxx : select = 8'b00100000; 8'b0001xxxx : select = 8'b00010000; 8'b00001xxx : select = 8'b00001000; 8'b000001xx : select = 8'b00000100; 8'b0000001x : select = 8'b00000010; 8'b00000001 : select = 8'b00000001; default : select = {nr_of_ports{1'b0}}; endcase else select = {nr_of_ports{1'b0}}; assign eoc[7] = (wbm_ack_i[7] & (wbm7_cti_o == 3'b000 | wbm7_cti_o == 3'b111)) | !wbm_cyc_o[7]; assign eoc[6] = (wbm_ack_i[6] & (wbm6_cti_o == 3'b000 | wbm6_cti_o == 3'b111)) | !wbm_cyc_o[6]; assign eoc[5] = (wbm_ack_i[5] & (wbm5_cti_o == 3'b000 | wbm5_cti_o == 3'b111)) | !wbm_cyc_o[5]; assign eoc[4] = (wbm_ack_i[4] & (wbm4_cti_o == 3'b000 | wbm4_cti_o == 3'b111)) | !wbm_cyc_o[4]; assign eoc[3] = (wbm_ack_i[3] & (wbm3_cti_o == 3'b000 | wbm3_cti_o == 3'b111)) | !wbm_cyc_o[3]; assign eoc[2] = (wbm_ack_i[2] & (wbm2_cti_o == 3'b000 | wbm2_cti_o == 3'b111)) | !wbm_cyc_o[2]; assign eoc[1] = (wbm_ack_i[1] & (wbm1_cti_o == 3'b000 | wbm1_cti_o == 3'b111)) | !wbm_cyc_o[1]; assign eoc[0] = (wbm_ack_i[0] & (wbm0_cti_o == 3'b000 | wbm0_cti_o == 3'b111)) | !wbm_cyc_o[0]; end endgenerate generate for (i=0;i<nr_of_ports;i=i+1) begin : spr0 `define MODULE spr `BASE`MODULE sr0( .sp(select[i]), .r(eoc[i]), .q(state[i]), .clk(wb_clk), .rst(wb_rst)); `undef MODULE end endgenerate assign sel = select | state; `define MODULE mux_andor `BASE`MODULE # ( .nr_of_ports(nr_of_ports), .width(32)) mux0 ( .a(wbm_dat_o), .sel(sel), .dout(wbs_dat_i)); `BASE`MODULE # ( .nr_of_ports(nr_of_ports), .width(adr_size-adr_lo)) mux1 ( .a(wbm_adr_o), .sel(sel), .dout(wbs_adr_i)); `BASE`MODULE # ( .nr_of_ports(nr_of_ports), .width(sel_size)) mux2 ( .a(wbm_sel_o), .sel(sel), .dout(wbs_sel_i)); `BASE`MODULE # ( .nr_of_ports(nr_of_ports), .width(3)) mux3 ( .a(wbm_cti_o), .sel(sel), .dout(wbs_cti_i)); `BASE`MODULE # ( .nr_of_ports(nr_of_ports), .width(2)) mux4 ( .a(wbm_bte_o), .sel(sel), .dout(wbs_bte_i)); `BASE`MODULE # ( .nr_of_ports(nr_of_ports), .width(1)) mux5 ( .a(wbm_we_o), .sel(sel), .dout(wbs_we_i)); `BASE`MODULE # ( .nr_of_ports(nr_of_ports), .width(1)) mux6 ( .a(wbm_stb_o), .sel(sel), .dout(wbs_stb_i)); `undef MODULE assign wbs_cyc_i = |sel; assign wbm_dat_i = {nr_of_ports{wbs_dat_o}}; assign wbm_ack_i = {nr_of_ports{wbs_ack_o}} & sel; assign wbm_err_i = {nr_of_ports{wbs_err_o}} & sel; assign wbm_rty_i = {nr_of_ports{wbs_rty_o}} & sel; endmodule `endif `ifdef WB_B3_RAM_BE // WB RAM with byte enable `define MODULE wb_b3_ram_be module `BASE`MODULE ( `undef MODULE wbs_dat_i, wbs_adr_i, wbs_cti_i, wbs_bte_i, wbs_sel_i, wbs_we_i, wbs_stb_i, wbs_cyc_i, wbs_dat_o, wbs_ack_o, wb_clk, wb_rst); parameter adr_size = 16; parameter mem_size = 1<<adr_size; parameter dat_size = 32; parameter max_burst_width = 4; parameter memory_init = 1; parameter memory_file = "vl_ram.vmem"; localparam aw = (adr_size); localparam dw = dat_size; localparam sw = dat_size/8; localparam cw = 3; localparam bw = 2; input [dw-1:0] wbs_dat_i; input [aw-1:0] wbs_adr_i; input [cw-1:0] wbs_cti_i; input [bw-1:0] wbs_bte_i; input [sw-1:0] wbs_sel_i; input wbs_we_i, wbs_stb_i, wbs_cyc_i; output [dw-1:0] wbs_dat_o; output wbs_ack_o; input wb_clk, wb_rst; wire [aw-1:0] adr; `define MODULE ram_be `BASE`MODULE # ( .data_width(dat_size), .addr_width(aw), .mem_size(mem_size), .memory_init(memory_init), .memory_file(memory_file)) ram0( `undef MODULE .d(wbs_dat_i), .adr(adr), .be(wbs_sel_i), .we(wbs_we_i & wbs_ack_o), .q(wbs_dat_o), .clk(wb_clk) ); `define MODULE wb_adr_inc `BASE`MODULE # ( .adr_width(aw), .max_burst_width(max_burst_width)) adr_inc0 ( .cyc_i(wbs_cyc_i), .stb_i(wbs_stb_i), .cti_i(wbs_cti_i), .bte_i(wbs_bte_i), .adr_i(wbs_adr_i), .we_i(wbs_we_i), .ack_o(wbs_ack_o), .adr_o(adr), .clk(wb_clk), .rst(wb_rst)); `undef MODULE endmodule `endif `ifdef WB_B4_RAM_BE // WB RAM with byte enable `define MODULE wb_b4_ram_be module `BASE`MODULE ( `undef MODULE wb_dat_i, wb_adr_i, wb_sel_i, wb_we_i, wb_stb_i, wb_cyc_i, wb_dat_o, wb_stall_o, wb_ack_o, wb_clk, wb_rst); parameter dat_width = 32; parameter adr_width = 8; input [dat_width-1:0] wb_dat_i; input [adr_width-1:0] wb_adr_i; input [dat_width/8-1:0] wb_sel_i; input wb_we_i, wb_stb_i, wb_cyc_i; output [dat_width-1:0] wb_dat_o; reg [dat_width-1:0] wb_dat_o; output wb_stall_o; output wb_ack_o; reg wb_ack_o; input wb_clk, wb_rst; wire [dat_width/8-1:0] cke; generate if (dat_width==32) begin reg [7:0] ram3 [1<<(adr_width-2)-1:0]; reg [7:0] ram2 [1<<(adr_width-2)-1:0]; reg [7:0] ram1 [1<<(adr_width-2)-1:0]; reg [7:0] ram0 [1<<(adr_width-2)-1:0]; assign cke = wb_sel_i & {(dat_width/8){wb_we_i}}; always @ (posedge wb_clk) begin if (cke[3]) ram3[wb_adr_i[adr_width-1:2]] <= wb_dat_i[31:24]; if (cke[2]) ram2[wb_adr_i[adr_width-1:2]] <= wb_dat_i[23:16]; if (cke[1]) ram1[wb_adr_i[adr_width-1:2]] <= wb_dat_i[15:8]; if (cke[0]) ram0[wb_adr_i[adr_width-1:2]] <= wb_dat_i[7:0]; end always @ (posedge wb_clk or posedge wb_rst) begin if (wb_rst) wb_dat_o <= 32'h0; else wb_dat_o <= {ram3[wb_adr_i[adr_width-1:2]],ram2[wb_adr_i[adr_width-1:2]],ram1[wb_adr_i[adr_width-1:2]],ram0[wb_adr_i[adr_width-1:2]]}; end end endgenerate always @ (posedge wb_clk or posedge wb_rst) if (wb_rst) wb_ack_o <= 1'b0; else wb_ack_o <= wb_stb_i & wb_cyc_i; assign wb_stall_o = 1'b0; endmodule `endif `ifdef WB_B4_ROM // WB ROM `define MODULE wb_b4_rom module `BASE`MODULE ( `undef MODULE wb_adr_i, wb_stb_i, wb_cyc_i, wb_dat_o, stall_o, wb_ack_o, wb_clk, wb_rst); parameter dat_width = 32; parameter dat_default = 32'h15000000; parameter adr_width = 32; /* `ifndef ROM `define ROM "rom.v" `endif */ input [adr_width-1:2] wb_adr_i; input wb_stb_i; input wb_cyc_i; output [dat_width-1:0] wb_dat_o; reg [dat_width-1:0] wb_dat_o; output wb_ack_o; reg wb_ack_o; output stall_o; input wb_clk; input wb_rst; always @ (posedge wb_clk or posedge wb_rst) if (wb_rst) wb_dat_o <= {dat_width{1'b0}}; else case (wb_adr_i[adr_width-1:2]) `ifdef ROM `include `ROM `endif default: wb_dat_o <= dat_default; endcase // case (wb_adr_i) always @ (posedge wb_clk or posedge wb_rst) if (wb_rst) wb_ack_o <= 1'b0; else wb_ack_o <= wb_stb_i & wb_cyc_i; assign stall_o = 1'b0; endmodule `endif `ifdef WB_BOOT_ROM // WB ROM `define MODULE wb_boot_rom module `BASE`MODULE ( `undef MODULE wb_adr_i, wb_stb_i, wb_cyc_i, wb_dat_o, wb_ack_o, hit_o, wb_clk, wb_rst); parameter adr_hi = 31; parameter adr_lo = 28; parameter adr_sel = 4'hf; parameter addr_width = 5; /* `ifndef BOOT_ROM `define BOOT_ROM "boot_rom.v" `endif */ input [adr_hi:2] wb_adr_i; input wb_stb_i; input wb_cyc_i; output [31:0] wb_dat_o; output wb_ack_o; output hit_o; input wb_clk; input wb_rst; wire hit; reg [31:0] wb_dat; reg wb_ack; assign hit = wb_adr_i[adr_hi:adr_lo] == adr_sel; always @ (posedge wb_clk or posedge wb_rst) if (wb_rst) wb_dat <= 32'h15000000; else case (wb_adr_i[addr_width-1:2]) `ifdef BOOT_ROM `include `BOOT_ROM `endif /* // Zero r0 and jump to 0x00000100 0 : wb_dat <= 32'h18000000; 1 : wb_dat <= 32'hA8200000; 2 : wb_dat <= 32'hA8C00100; 3 : wb_dat <= 32'h44003000; 4 : wb_dat <= 32'h15000000; */ default: wb_dat <= 32'h00000000; endcase // case (wb_adr_i) always @ (posedge wb_clk or posedge wb_rst) if (wb_rst) wb_ack <= 1'b0; else wb_ack <= wb_stb_i & wb_cyc_i & hit & !wb_ack; assign hit_o = hit; assign wb_dat_o = wb_dat & {32{wb_ack}}; assign wb_ack_o = wb_ack; endmodule `endif `ifdef WB_B3_DPRAM `define MODULE wb_b3_dpram module `BASE`MODULE ( `undef MODULE // wishbone slave side a wbsa_dat_i, wbsa_adr_i, wbsa_sel_i, wbsa_cti_i, wbsa_bte_i, wbsa_we_i, wbsa_cyc_i, wbsa_stb_i, wbsa_dat_o, wbsa_ack_o, wbsa_clk, wbsa_rst, // wishbone slave side b wbsb_dat_i, wbsb_adr_i, wbsb_sel_i, wbsb_cti_i, wbsb_bte_i, wbsb_we_i, wbsb_cyc_i, wbsb_stb_i, wbsb_dat_o, wbsb_ack_o, wbsb_clk, wbsb_rst); parameter data_width_a = 32; parameter data_width_b = data_width_a; parameter addr_width_a = 8; localparam addr_width_b = data_width_a * addr_width_a / data_width_b; parameter mem_size = (addr_width_a>addr_width_b) ? (1<<addr_width_a) : (1<<addr_width_b); parameter max_burst_width_a = 4; parameter max_burst_width_b = max_burst_width_a; input [data_width_a-1:0] wbsa_dat_i; input [addr_width_a-1:0] wbsa_adr_i; input [data_width_a/8-1:0] wbsa_sel_i; input [2:0] wbsa_cti_i; input [1:0] wbsa_bte_i; input wbsa_we_i, wbsa_cyc_i, wbsa_stb_i; output [data_width_a-1:0] wbsa_dat_o; output wbsa_ack_o; input wbsa_clk, wbsa_rst; input [data_width_b-1:0] wbsb_dat_i; input [addr_width_b-1:0] wbsb_adr_i; input [data_width_b/8-1:0] wbsb_sel_i; input [2:0] wbsb_cti_i; input [1:0] wbsb_bte_i; input wbsb_we_i, wbsb_cyc_i, wbsb_stb_i; output [data_width_b-1:0] wbsb_dat_o; output wbsb_ack_o; input wbsb_clk, wbsb_rst; wire [addr_width_a-1:0] adr_a; wire [addr_width_b-1:0] adr_b; `define MODULE wb_adr_inc `BASE`MODULE # ( .adr_width(addr_width_a), .max_burst_width(max_burst_width_a)) adr_inc0 ( .cyc_i(wbsa_cyc_i), .stb_i(wbsa_stb_i), .cti_i(wbsa_cti_i), .bte_i(wbsa_bte_i), .adr_i(wbsa_adr_i), .we_i(wbsa_we_i), .ack_o(wbsa_ack_o), .adr_o(adr_a), .clk(wbsa_clk), .rst(wbsa_rst)); `BASE`MODULE # ( .adr_width(addr_width_b), .max_burst_width(max_burst_width_b)) adr_inc1 ( .cyc_i(wbsb_cyc_i), .stb_i(wbsb_stb_i), .cti_i(wbsb_cti_i), .bte_i(wbsb_bte_i), .adr_i(wbsb_adr_i), .we_i(wbsb_we_i), .ack_o(wbsb_ack_o), .adr_o(adr_b), .clk(wbsb_clk), .rst(wbsb_rst)); `undef MODULE `define MODULE dpram_be_2r2w `BASE`MODULE # ( .a_data_width(data_width_a), .a_addr_width(addr_width_a), .mem_size(mem_size)) `undef MODULE ram_i ( .d_a(wbsa_dat_i), .q_a(wbsa_dat_o), .adr_a(adr_a), .be_a(wbsa_sel_i), .we_a(wbsa_we_i & wbsa_ack_o), .clk_a(wbsa_clk), .d_b(wbsb_dat_i), .q_b(wbsb_dat_o), .adr_b(adr_b), .be_b(wbsb_sel_i), .we_b(wbsb_we_i & wbsb_ack_o), .clk_b(wbsb_clk) ); endmodule `endif `ifdef WBB3_WBB4_CACHE `define MODULE wbb3_wbb4_cache module `BASE`MODULE ( wbs_dat_i, wbs_adr_i, wbs_sel_i, wbs_cti_i, wbs_bte_i, wbs_we_i, wbs_stb_i, wbs_cyc_i, wbs_dat_o, wbs_ack_o, wbs_clk, wbs_rst, wbm_dat_o, wbm_adr_o, wbm_sel_o, wbm_cti_o, wbm_bte_o, wbm_we_o, wbm_stb_o, wbm_cyc_o, wbm_dat_i, wbm_ack_i, wbm_stall_i, wbm_clk, wbm_rst ); `undef MODULE parameter dw_s = 32; parameter aw_s = 24; parameter dw_m = dw_s; parameter aw_m = dw_s * aw_s / dw_m; parameter max_burst_width = 4; parameter async = 1; // wbs_clk != wbm_clk parameter nr_of_ways = 1; parameter aw_offset = 4; // 4 => 16 words per cache line parameter aw_slot = 10; localparam aw_tag = aw_s - aw_slot - aw_offset; parameter wbm_burst_size = 4; // valid options 4,8,16 localparam bte = (wbm_burst_size==4) ? 2'b01 : (wbm_burst_size==8) ? 2'b10 : 2'b11; `define SIZE2WIDTH wbm_burst_size localparam wbm_burst_width `SIZE2WIDTH_EXPR `undef SIZE2WIDTH localparam nr_of_wbm_burst = ((1<<aw_offset)/wbm_burst_size) * dw_s / dw_m; `define SIZE2WIDTH nr_of_wbm_burst localparam nr_of_wbm_burst_width `SIZE2WIDTH_EXPR `undef SIZE2WIDTH input [dw_s-1:0] wbs_dat_i; input [aw_s-1:0] wbs_adr_i; // dont include a1,a0 input [dw_s/8-1:0] wbs_sel_i; input [2:0] wbs_cti_i; input [1:0] wbs_bte_i; input wbs_we_i, wbs_stb_i, wbs_cyc_i; output [dw_s-1:0] wbs_dat_o; output wbs_ack_o; input wbs_clk, wbs_rst; output [dw_m-1:0] wbm_dat_o; output [aw_m-1:0] wbm_adr_o; output [dw_m/8-1:0] wbm_sel_o; output [2:0] wbm_cti_o; output [1:0] wbm_bte_o; output wbm_stb_o, wbm_cyc_o, wbm_we_o; input [dw_m-1:0] wbm_dat_i; input wbm_ack_i; input wbm_stall_i; input wbm_clk, wbm_rst; wire dirty, valid; wire [aw_tag-1:0] tag; wire tag_mem_we; wire [aw_tag-1:0] wbs_adr_tag; wire [aw_slot-1:0] wbs_adr_slot; wire [aw_offset-1:0] wbs_adr_word; wire [aw_s-1:0] wbs_adr; reg [1:0] state; localparam idle = 2'h0; localparam rdwr = 2'h1; localparam push = 2'h2; localparam pull = 2'h3; wire eoc; // cdc wire done, mem_alert, mem_done; // wbm side reg [aw_m-1:0] wbm_radr; reg [aw_m-1:0] wbm_wadr; wire [aw_slot+-1:0] wbm_adr; wire wbm_radr_cke, wbm_wadr_cke; reg [1:0] phase; localparam wbm_wait = 2'b00; localparam wbm_rd = 2'b10; localparam wbm_wr = 2'b11; assign {wbs_adr_tag, wbs_adr_slot, wbs_adr_word} = wbs_adr_i; assign eoc = (wbs_cti_i==3'b000 | wbs_cti_i==3'b111) & wbs_ack_o; `define MODULE ram `BASE`MODULE # ( .data_width(aw_tag), .addr_width(aw_slot)) tag_mem ( .d(wbs_adr_slot), .adr(wbs_adr_tag), .we(done), .q(tag), .clk(wbs_clk)); `undef MODULE assign valid = wbs_adr_tag == tag; `define MODULE wb_adr_inc `BASE`MODULE # ( .adr_width(aw_s), .max_burst_width(max_burst_width)) adr_inc0 ( .cyc_i(wbs_cyc_i), .stb_i(wbs_stb_i & (state==idle | (state==rw & valid))), // throttle depending on valid .cti_i(wbs_cti_i), .bte_i(wbs_bte_i), .adr_i(wbs_adr_i), .we_i (wbs_we_i), .ack_o(wbs_ack_o), .adr_o(wbs_adr), .clk(wbsa_clk), .rst(wbsa_rst)); `undef MODULE `define MODULE dpram_be_2r2w `BASE`MODULE # ( .a_data_width(dw_s), .a_addr_width(aw_slot+aw_offset), .b_data_width(dw_m) ) cache_mem ( .d_a(wbs_dat_i), .adr_a(wbs_adr[aw_slot+aw_offset-1:0]), .be_a(wbs_sel_i), .we_a(wbs_cyc_i & wbs_we_i & wbs_ack_o), .q_a(wbs_dat_o), .clk_a(wbs_clk), .d_b(wbm_dat_i), .adr_b(wbm_adr), .be_b(wbm_sel_o), .we_b(wbm_cyc_o & !wbm_we_o & wbs_ack_i), .q_b(wbm_dat_o), .clk_b(wbm_clk)); `undef MODULE always @ (posedge wbs_clk or posedge wbs_rst) if (wbs_rst) state <= idle; else case (state) idle: if (wbs_cyc_i) state <= rdwr; rdwr: if (wbs_we_i & valid & eoc) state <= idle; else if (wbs_we_i & !valid) state <= pull; else if (!wbs_we_i & valid & eoc) state <= idle; else if (!wbs_we_i & !valid & !dirty) state <= pull; else if (!wbs_we_i & !valid & dirty) state <= push; push: if (done) state <= rdwr; pull: if (done) state <= rdwr; default: state <= idle; endcase // cdc generate if (async==1) begin : cdc0 `define MODULE cdc `BASE`MODULE cdc0 ( .start_pl(state==rdwr & !valid), .take_it_pl(mem_alert), .take_it_grant_pl(mem_done), .got_it_pl(done), .clk_src(wbs_clk), .rst_src(wbs_rst), .clk_dst(wbm_clk), .rst_dst(wbm_rst)); `undef MODULE end else begin : nocdc assign mem_alert = state==rdwr & !valid; assign done = mem_done; end endgenerate // FSM generating a number of burts 4 cycles // actual number depends on data width ratio // nr_of_wbm_burst reg [nr_of_wbm_burst_width+wbm_burst_width-1:0] cnt0; reg [nr_of_wbm_burst_width+wbm_burst_width-1:0] cnt1; always @ (posedge wbm_clk or posedge wbm_rst) if (wbm_rst) cnt0 <= {nr_of_wbm_burst_width+wbm_burst_width{1'b0}}; else if (wbm_radr_cke) cnt0 <= cnt0 + 1;//(nr_of_wbm_burst_width+wbm_burst_width)1'd1; assign wbm_radr_cke = wbm_cyc_o & wbm_stb_o & !wbm_stall_i; assign wbm_radr = {wbs_adr_tag, tag, cnt0}; always @ (posedge wbm_clk or posedge wbm_rst) if (wbm_rst) cnt1 <= {nr_of_wbm_burst_width+wbm_burst_width{1'b0}}; else if (wbm_wadr_cke) cnt1 <= cnt1 + 1;//(nr_of_wbm_burst_width+wbm_burst_width)1'd1; assign wbm_wadr_cke = wbm_ack_i; assign wbm_wadr = {wbs_adr_tag, wbs_adr_slot, cnt1}; always @ (posedge wbm_clk or posedge wbm_rst) if (wbm_rst) phase <= wbm_wait; else case (phase) wbm_wait: if (mem_alert) phase <= state; wbm_wr: if (&cnt1 & wbm_ack_i) phase <= wbm_rd; wbm_rd: if (&cnt0 & wbm_ack_i) phase <= idle; default: phase <= wbm_wait; endcase assign wbm_adr_o = (phase==wbm_wr) ? {tag, wbs_adr_slot, cnt1} : {wbs_adr_tag, wbs_adr_slot, cnt1}; assign wbm_adr = (phase==wbm_wr) ? {wbs_adr_slot, cnt1} : {wbs_adr_slot, cnt1}; assign wbm_cti_o = (&cnt0 | &cnt1) ? 3'b111 : 3'b010; assign wbm_bte_o = bte; assign wbm_we_o = phase==wbm_wr; endmodule `endif ////////////////////////////////////////////////////////////////////// //// //// //// Arithmetic functions //// //// //// //// Description //// //// Arithmetic functions for ALU and DSP //// //// //// //// //// //// To Do: //// //// - //// //// //// //// Author(s): //// //// - Michael Unneback, unneback@opencores.org //// //// ORSoC AB //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2010 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// `ifdef MULTS // signed multiplication `define MODULE mults module `BASE`MODULE (a,b,p); `undef MODULE parameter operand_a_width = 18; parameter operand_b_width = 18; parameter result_hi = 35; parameter result_lo = 0; input [operand_a_width-1:0] a; input [operand_b_width-1:0] b; output [result_hi:result_lo] p; wire signed [operand_a_width-1:0] ai; wire signed [operand_b_width-1:0] bi; wire signed [operand_a_width+operand_b_width-1:0] result; assign ai = a; assign bi = b; assign result = ai * bi; assign p = result[result_hi:result_lo]; endmodule `endif `ifdef MULTS18X18 `define MODULE mults18x18 module `BASE`MODULE (a,b,p); `undef MODULE input [17:0] a,b; output [35:0] p; vl_mult # (.operand_a_width(18), .operand_b_width(18)) mult0 (.a(a), .b(b), .p(p)); endmodule `endif `ifdef MULT `define MODULE mult // unsigned multiplication module `BASE`MODULE (a,b,p); `undef MODULE parameter operand_a_width = 18; parameter operand_b_width = 18; parameter result_hi = 35; parameter result_lo = 0; input [operand_a_width-1:0] a; input [operand_b_width-1:0] b; output [result_hi:result_hi] p; wire [operand_a_width+operand_b_width-1:0] result; assign result = a * b; assign p = result[result_hi:result_lo]; endmodule `endif `ifdef SHIFT_UNIT_32 `define MODULE shift_unit_32 // shift unit // supporting the following shift functions // SLL // SRL // SRA `define SHIFT_UNIT_MULT # ( .operand_a_width(25), .operand_b_width(16), .result_hi(14), .result_lo(7)) module `BASE`MODULE( din, s, dout, opcode); `undef MODULE input [31:0] din; // data in operand input [4:0] s; // shift operand input [1:0] opcode; output [31:0] dout; parameter opcode_sll = 2'b00; //parameter opcode_srl = 2'b01; parameter opcode_sra = 2'b10; //parameter opcode_ror = 2'b11; wire sll, sra; assign sll = opcode == opcode_sll; assign sra = opcode == opcode_sra; wire [15:1] s1; wire [3:0] sign; wire [7:0] tmp [0:3]; // first stage is multiplier based // shift operand as fractional 8.7 assign s1[15] = sll & s[2:0]==3'd7; assign s1[14] = sll & s[2:0]==3'd6; assign s1[13] = sll & s[2:0]==3'd5; assign s1[12] = sll & s[2:0]==3'd4; assign s1[11] = sll & s[2:0]==3'd3; assign s1[10] = sll & s[2:0]==3'd2; assign s1[ 9] = sll & s[2:0]==3'd1; assign s1[ 8] = s[2:0]==3'd0; assign s1[ 7] = !sll & s[2:0]==3'd1; assign s1[ 6] = !sll & s[2:0]==3'd2; assign s1[ 5] = !sll & s[2:0]==3'd3; assign s1[ 4] = !sll & s[2:0]==3'd4; assign s1[ 3] = !sll & s[2:0]==3'd5; assign s1[ 2] = !sll & s[2:0]==3'd6; assign s1[ 1] = !sll & s[2:0]==3'd7; assign sign[3] = din[31] & sra; assign sign[2] = sign[3] & (&din[31:24]); assign sign[1] = sign[2] & (&din[23:16]); assign sign[0] = sign[1] & (&din[15:8]); `define MODULE mults `BASE`MODULE `SHIFT_UNIT_MULT mult_byte3 ( .a({sign[3], {8{sign[3]}},din[31:24], din[23:16]}), .b({1'b0,s1}), .p(tmp[3])); `BASE`MODULE `SHIFT_UNIT_MULT mult_byte2 ( .a({sign[2], din[31:24] ,din[23:16], din[15:8]}), .b({1'b0,s1}), .p(tmp[2])); `BASE`MODULE `SHIFT_UNIT_MULT mult_byte1 ( .a({sign[1], din[23:16] ,din[15:8], din[7:0]}), .b({1'b0,s1}), .p(tmp[1])); `BASE`MODULE `SHIFT_UNIT_MULT mult_byte0 ( .a({sign[0], din[15:8] ,din[7:0], 8'h00}), .b({1'b0,s1}), .p(tmp[0])); `undef MODULE // second stage is multiplexer based // shift on byte level // mux byte 3 assign dout[31:24] = (s[4:3]==2'b00) ? tmp[3] : (sll & s[4:3]==2'b01) ? tmp[2] : (sll & s[4:3]==2'b10) ? tmp[1] : (sll & s[4:3]==2'b11) ? tmp[0] : {8{sign[3]}}; // mux byte 2 assign dout[23:16] = (s[4:3]==2'b00) ? tmp[2] : (sll & s[4:3]==2'b01) ? tmp[1] : (sll & s[4:3]==2'b10) ? tmp[0] : (sll & s[4:3]==2'b11) ? {8{1'b0}} : (s[4:3]==2'b01) ? tmp[3] : {8{sign[3]}}; // mux byte 1 assign dout[15:8] = (s[4:3]==2'b00) ? tmp[1] : (sll & s[4:3]==2'b01) ? tmp[0] : (sll & s[4:3]==2'b10) ? {8{1'b0}} : (sll & s[4:3]==2'b11) ? {8{1'b0}} : (s[4:3]==2'b01) ? tmp[2] : (s[4:3]==2'b10) ? tmp[3] : {8{sign[3]}}; // mux byte 0 assign dout[7:0] = (s[4:3]==2'b00) ? tmp[0] : (sll) ? {8{1'b0}}: (s[4:3]==2'b01) ? tmp[1] : (s[4:3]==2'b10) ? tmp[2] : tmp[3]; endmodule `endif `ifdef LOGIC_UNIT // logic unit // supporting the following logic functions // a and b // a or b // a xor b // not b `define MODULE logic_unit module `BASE`MODULE( a, b, result, opcode); `undef MODULE parameter width = 32; parameter opcode_and = 2'b00; parameter opcode_or = 2'b01; parameter opcode_xor = 2'b10; input [width-1:0] a,b; output [width-1:0] result; input [1:0] opcode; assign result = (opcode==opcode_and) ? a & b : (opcode==opcode_or) ? a | b : (opcode==opcode_xor) ? a ^ b : b; endmodule `endif `ifdef ARITH_UNIT `define MODULE arith_unit module `BASE`MODULE ( a, b, c_in, add_sub, sign, result, c_out, z, ovfl); `undef MODULE parameter width = 32; parameter opcode_add = 1'b0; parameter opcode_sub = 1'b1; input [width-1:0] a,b; input c_in, add_sub, sign; output [width-1:0] result; output c_out, z, ovfl; assign {c_out,result} = {(a[width-1] & sign),a} + ({a[width-1] & sign,b} ^ {(width+1){(add_sub==opcode_sub)}}) + {{(width-1){1'b0}},(c_in | (add_sub==opcode_sub))}; assign z = (result=={width{1'b0}}); assign ovfl = ( a[width-1] & b[width-1] & ~result[width-1]) | (~a[width-1] & ~b[width-1] & result[width-1]); endmodule `endif `ifdef COUNT_UNIT `define MODULE count_unit module `BASE`MODULE (din, dout, opcode); `undef MODULE parameter width = 32; input [width-1:0] din; output [width-1:0] dout; input opcode; integer i; wire [width/32+4:0] ff1, fl1; /* always @(din) begin ff1 = 0; i = 0; while (din[i] == 0 && i < width) begin // complex condition ff1 = ff1 + 1; i = i + 1; end end always @(din) begin fl1 = width; i = width-1; while (din[i] == 0 && i >= width) begin // complex condition fl1 = fl1 - 1; i = i - 1; end end */ generate if (width==32) begin assign ff1 = din[0] ? 6'd1 : din[1] ? 6'd2 : din[2] ? 6'd3 : din[3] ? 6'd4 : din[4] ? 6'd5 : din[5] ? 6'd6 : din[6] ? 6'd7 : din[7] ? 6'd8 : din[8] ? 6'd9 : din[9] ? 6'd10 : din[10] ? 6'd11 : din[11] ? 6'd12 : din[12] ? 6'd13 : din[13] ? 6'd14 : din[14] ? 6'd15 : din[15] ? 6'd16 : din[16] ? 6'd17 : din[17] ? 6'd18 : din[18] ? 6'd19 : din[19] ? 6'd20 : din[20] ? 6'd21 : din[21] ? 6'd22 : din[22] ? 6'd23 : din[23] ? 6'd24 : din[24] ? 6'd25 : din[25] ? 6'd26 : din[26] ? 6'd27 : din[27] ? 6'd28 : din[28] ? 6'd29 : din[29] ? 6'd30 : din[30] ? 6'd31 : din[31] ? 6'd32 : 6'd0; assign fl1 = din[31] ? 6'd32 : din[30] ? 6'd31 : din[29] ? 6'd30 : din[28] ? 6'd29 : din[27] ? 6'd28 : din[26] ? 6'd27 : din[25] ? 6'd26 : din[24] ? 6'd25 : din[23] ? 6'd24 : din[22] ? 6'd23 : din[21] ? 6'd22 : din[20] ? 6'd21 : din[19] ? 6'd20 : din[18] ? 6'd19 : din[17] ? 6'd18 : din[16] ? 6'd17 : din[15] ? 6'd16 : din[14] ? 6'd15 : din[13] ? 6'd14 : din[12] ? 6'd13 : din[11] ? 6'd12 : din[10] ? 6'd11 : din[9] ? 6'd10 : din[8] ? 6'd9 : din[7] ? 6'd8 : din[6] ? 6'd7 : din[5] ? 6'd6 : din[4] ? 6'd5 : din[3] ? 6'd4 : din[2] ? 6'd3 : din[1] ? 6'd2 : din[0] ? 6'd1 : 6'd0; assign dout = (!opcode) ? {{26{1'b0}}, ff1} : {{26{1'b0}}, fl1}; end endgenerate generate if (width==64) begin assign ff1 = 7'd0; assign fl1 = 7'd0; assign dout = (!opcode) ? {{57{1'b0}}, ff1} : {{57{1'b0}}, fl1}; end endgenerate endmodule `endif `ifdef EXT_UNIT `define MODULE ext_unit module `BASE`MODULE ( a, b, F, result, opcode); `undef MODULE parameter width = 32; input [width-1:0] a, b; input F; output reg [width-1:0] result; input [2:0] opcode; generate if (width==32) begin always @ (a or b or F or opcode) begin case (opcode) 3'b000: result = {{24{1'b0}},a[7:0]}; 3'b001: result = {{24{a[7]}},a[7:0]}; 3'b010: result = {{16{1'b0}},a[7:0]}; 3'b011: result = {{16{a[15]}},a[15:0]}; 3'b110: result = (F) ? a : b; default: result = {b[15:0],16'h0000}; endcase end end endgenerate generate if (width==64) begin always @ (a or b or F or opcode) begin case (opcode) 3'b000: result = {{56{1'b0}},a[7:0]}; 3'b001: result = {{56{a[7]}},a[7:0]}; 3'b010: result = {{48{1'b0}},a[7:0]}; 3'b011: result = {{48{a[15]}},a[15:0]}; 3'b110: result = (F) ? a : b; default: result = {32'h00000000,b[15:0],16'h0000}; endcase end end endgenerate endmodule `endif
Go to most recent revision | Compare with Previous | Blame | View Log