URL
https://opencores.org/ocsvn/vhld_tb/vhld_tb/trunk
Subversion Repositories vhld_tb
[/] [vhld_tb/] [trunk/] [source/] [template_tb_bhv.vhd] - Rev 22
Go to most recent revision | Compare with Previous | Blame | View Log
------------------------------------------------------------------------------- -- Copyright 2011 Ken Campbell ------------------------------------------------------------------------------- -- $Author: sckoarn $ -- -- $Date: $ -- -- $Id: $ -- -- $Source: $ -- -- Description : The the testbench package template behave file. -- GNU release 2 Beta. -- ------------------------------------------------------------------------------ --This file is part of The VHDL Test Bench. -- -- The VHDL Test Bench is free software; you can redistribute it and/or modify -- it under the terms of the GNU General Public License as published by -- the Free Software Foundation; either version 2 of the License, or -- (at your option) any later version. -- -- The VHDL Test Bench is distributed in the hope that it will be useful, -- but WITHOUT ANY WARRANTY; without even the implied warranty of -- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -- GNU General Public License for more details. -- -- You should have received a copy of the GNU General Public License -- along with The VHDL Test Bench; if not, write to the Free Software -- Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ------------------------------------------------------------------------------- architecture bhv of tb_Top is signal tb_clk : std_logic; ------------------------------------------------------------------------- -- Component defintion ------------------------------------------------------------------------------- -- USER Component instantiations --for all: Arbitor use entity tb_objects.arbitor(bhv); begin ------------------------------------------------------------------------------- -- clock driver process -- the main clock generator clock_driver: process begin tb_clk <= '0'; wait for 5 ns; tb_clk <= '1'; wait for 5 ns; end process clock_driver; -------------------------------------------------------------------------- -- Read_file Process: -- -- This process is the main process of the testbench. This process reads -- the stumulus file, parses it, creates lists of records, then uses these -- lists to exicute user instructions. There are two passes through the -- script. Pass one reads in the stimulus text file, checks it, creates -- lists of valid instructions, valid list of variables and finialy a list -- of user instructions(the sequence). The second pass through the file, -- records are drawn from the user instruction list, variables are converted -- to integers and put through the elsif structure for exicution. -------------------------------------------------------------------------- Read_file: process variable current_line : text_line; -- The current input line variable inst_list : inst_def_ptr; -- the instruction list variable defined_vars : var_field_ptr; -- defined variables variable inst_sequ : stim_line_ptr; -- the instruction sequence variable file_list : file_def_ptr; -- pointer to the list of file names variable last_sequ_num: integer; variable last_sequ_ptr: stim_line_ptr; variable instruction : text_field; -- instruction field variable par1 : integer; -- paramiter 1 variable par2 : integer; -- paramiter 2 variable par3 : integer; -- paramiter 3 variable par4 : integer; -- paramiter 4 variable par5 : integer; -- paramiter 5 variable par6 : integer; -- paramiter 6 variable txt : stm_text_ptr; variable nbase : base; -- the number base to use variable len : integer; -- length of the instruction field variable file_line : integer; -- Line number in the stimulus file variable file_name : text_line; -- the file name the line came from variable v_line : integer := 0; -- sequence number variable stack : stack_register; -- Call stack variable stack_ptr : integer := 0; -- call stack pointer variable wh_stack : stack_register; -- while stack variable wh_dpth : integer := 0; -- while depth variable wh_ptr : integer := 0; -- while pointer variable loop_num : integer := 0; variable curr_loop_count : int_array := (others => 0); variable term_loop_count : int_array := (others => 0); variable loop_line : int_array := (others => 0); variable messages : boolean := TRUE; variable if_state : boolean := FALSE; variable wh_state : boolean := FALSE; variable wh_end : boolean := FALSE; variable rand : std_logic_vector(31 downto 0); variable rand_back : std_logic_vector(31 downto 0); variable valid : integer; -- scratchpad variables variable temp_int : integer; variable temp_index : integer; variable temp_str : text_field; variable v_temp_vec1 : std_logic_vector(31 downto 0); variable v_temp_vec2 : std_logic_vector(31 downto 0); -------------------------------------------------------------------------- -- Area for Procedures which may be usefull to more than one instruction. -- By coding here commonly used code sections ... -- you know the benifits. --------------------------------------------------------------------- ----------------------------------------------------------------- -- This procedure writes to the arbitor model access port -- procedure arb_write(add: in integer; ..... -- end arb_write; begin -- process Read_file -- parse_tb1 start input initialization ----------------------------------------------------------------------- -- Stimulus file instruction definition -- This is where the instructions used in the stimulus file are defined. -- Syntax is -- define_instruction(inst_def_ptr, instruction, paramiters) -- inst_def_ptr: is a record pointer defined in tb_pkg_header -- instruction: the text instruction name ie. "ADD_VAR" -- paramiters: the number of fields or paramiters passed -- -- Some basic instruction are created here, the user should create new -- instructions below the standard ones. ------------------------------------------------------------------------ define_instruction(inst_list, "DEFINE_VAR", 2); -- Define a Variable define_instruction(inst_list, "EQU_VAR", 2); define_instruction(inst_list, "ADD_VAR", 2); define_instruction(inst_list, "SUB_VAR", 2); define_instruction(inst_list, "CALL", 1); define_instruction(inst_list, "RETURN_CALL", 0); define_instruction(inst_list, "JUMP", 1); define_instruction(inst_list, "LOOP", 1); define_instruction(inst_list, "END_LOOP", 0); define_instruction(inst_list, "IF", 3); define_instruction(inst_list, "ELSEIF", 3); define_instruction(inst_list, "ELSE", 0); define_instruction(inst_list, "END_IF", 0); define_instruction(inst_list, "WHILE", 3); define_instruction(inst_list, "END_WHILE", 0); define_instruction(inst_list, "MESSAGES_OFF", 0); define_instruction(inst_list, "MESSAGES_ON", 0); define_instruction(inst_list, "ABORT", 0); -- Error exit from sim define_instruction(inst_list, "FINISH", 0); -- Normal exit from sim define_instruction(inst_list, "INCLUDE", 1); -- Include a script file -- Start User defined instructions -- End User defined instructions ------------------------------------------------------------------------ -- Read, test, and load the stimulus file read_instruction_file(stimulus_file, inst_list, defined_vars, inst_sequ, file_list); -- initialize last info last_sequ_num := 0; last_sequ_ptr := inst_sequ; ------------------------------------------------------------------------ -- Using the Instruction record list, get the instruction and implement -- it as per the statements in the elsif tree. while(v_line < inst_sequ.num_of_lines) loop v_line := v_line + 1; access_inst_sequ(inst_sequ, defined_vars, file_list, v_line, instruction, par1, par2, par3, par4, par5, par6, txt, len, file_name, file_line, last_sequ_num, last_sequ_ptr); -------------------------------------------------------------------------- --if(instruction(1 to len) = "DEFINE_VAR") then -- null; -- This instruction was implemented while reading the file -------------------------------------------------------------------------- if(instruction(1 to len) = "INCLUDE") then null; -- This instruction was implemented while reading the file -------------------------------------------------------------------------- elsif(instruction(1 to len) = "ABORT") then assert (false) report "The test has aborted due to an error!!" severity failure; -------------------------------------------------------------------------- elsif(instruction(1 to len) = "FINISH") then assert (false) report "Test Finished with NO errors!!" severity failure; -------------------------------------------------------------------------- elsif(instruction(1 to len) = "EQU_VAR") then update_variable(defined_vars, par1, par2, valid); -------------------------------------------------------------------------- elsif(instruction(1 to len) = "ADD_VAR") then index_variable(defined_vars, par1, temp_int, valid); if(valid /= 0) then temp_int := temp_int + par2; update_variable(defined_vars, par1, temp_int, valid); else assert (false) report "ADD_VAR Error: Not a valid Variable??" severity failure; end if; -------------------------------------------------------------------------- elsif(instruction(1 to len) = "SUB_VAR") then index_variable(defined_vars, par1, temp_int, valid); if(valid /= 0) then temp_int := temp_int - par2; update_variable(defined_vars, par1, temp_int, valid); else assert (false) report "SUB_VAR Error: Not a valid Variable??" severity failure; end if; -------------------------------------------------------------------------- elsif(instruction(1 to len) = "CALL") then if(stack_ptr >= 7) then assert (false) report "Call Error: Stack over run, calls to deeply nested!!" severity failure; end if; stack(stack_ptr) := v_line; stack_ptr := stack_ptr + 1; v_line := par1 - 1; -------------------------------------------------------------------------- elsif(instruction(1 to len) = "RETURN_CALL") then if(stack_ptr <= 0) then assert (false) report "Call Error: Stack under run??" severity failure; end if; stack_ptr := stack_ptr - 1; v_line := stack(stack_ptr); -------------------------------------------------------------------------- elsif(instruction(1 to len) = "JUMP") then v_line := par1 - 1; wh_state := false; wh_stack := (others => 0); wh_dpth := 0; wh_ptr := 0; stack := (others => 0); stack_ptr := 0; -------------------------------------------------------------------------------- elsif (instruction(1 to len) = "LOOP") then loop_num := loop_num + 1; loop_line(loop_num) := v_line; curr_loop_count(loop_num) := 0; term_loop_count(loop_num) := par1; assert (messages) report LF & "Executing LOOP Command" & LF & " Nested Loop:" & HT & integer'image(loop_num) & LF & " Loop Length:" & HT & integer'image(par1) severity note; -------------------------------------------------------------------------------- elsif (instruction(1 to len) = "END_LOOP") then curr_loop_count(loop_num) := curr_loop_count(loop_num) + 1; if (curr_loop_count(loop_num) = term_loop_count(loop_num)) then loop_num := loop_num - 1; else v_line := loop_line(loop_num); end if; -------------------------------------------------------------------------------- elsif (instruction(1 to len) = "IF") then if_state := false; case par2 is when 0 => if(par1 = par3) then if_state := true; end if; when 1 => if(par1 > par3) then if_state := true; end if; when 2 => if(par1 < par3) then if_state := true; end if; when 3 => if(par1 /= par3) then if_state := true; end if; when 4 => if(par1 >= par3) then if_state := true; end if; when 5 => if(par1 <= par3) then if_state := true; end if; when others => assert (false) report LF & "ERROR: IF instruction got an unexpected value" & LF & " in parameter 2!" & LF & "Found on line " & (ew_to_str(file_line,dec)) & " in file " & file_name severity failure; end case; if(if_state = false) then v_line := v_line + 1; access_inst_sequ(inst_sequ, defined_vars, file_list, v_line, instruction, par1, par2, par3, par4, par5, par6, txt, len, file_name, file_line, last_sequ_num, last_sequ_ptr); while(instruction(1 to len) /= "ELSE" and instruction(1 to len) /= "ELSEIF" and instruction(1 to len) /= "END_IF") loop if(v_line < inst_sequ.num_of_lines) then v_line := v_line + 1; access_inst_sequ(inst_sequ, defined_vars, file_list, v_line, instruction, par1, par2, par3, par4, par5, par6, txt, len, file_name, file_line, last_sequ_num, last_sequ_ptr); else assert (false) report LF & "ERROR: IF instruction unable to find terminating" & LF & " ELSE, ELSEIF or END_IF statement." severity failure; end if; end loop; v_line := v_line - 1; -- re-align so it will be operated on. end if; -------------------------------------------------------------------------------- elsif (instruction(1 to len) = "ELSEIF") then if(if_state = true) then -- if the if_state is true then skip to the end v_line := v_line + 1; access_inst_sequ(inst_sequ, defined_vars, file_list, v_line, instruction, par1, par2, par3, par4, par5, par6, txt, len, file_name, file_line, last_sequ_num, last_sequ_ptr); while(instruction(1 to len) /= "END_IF") loop if(v_line < inst_sequ.num_of_lines) then v_line := v_line + 1; access_inst_sequ(inst_sequ, defined_vars, file_list, v_line, instruction, par1, par2, par3, par4, par5, par6, txt, len, file_name, file_line, last_sequ_num, last_sequ_ptr); else assert (false) report LF & "ERROR: IF instruction unable to find terminating" & LF & " ELSE, ELSEIF or END_IF statement." severity failure; end if; end loop; v_line := v_line - 1; -- re-align so it will be operated on. else case par2 is when 0 => if(par1 = par3) then if_state := true; end if; when 1 => if(par1 > par3) then if_state := true; end if; when 2 => if(par1 < par3) then if_state := true; end if; when 3 => if(par1 /= par3) then if_state := true; end if; when 4 => if(par1 >= par3) then if_state := true; end if; when 5 => if(par1 <= par3) then if_state := true; end if; when others => assert (false) report LF & "ERROR: ELSEIF instruction got an unexpected value" & LF & " in parameter 2!" & LF & "Found on line " & (ew_to_str(file_line,dec)) & " in file " & file_name severity failure; end case; if(if_state = false) then v_line := v_line + 1; access_inst_sequ(inst_sequ, defined_vars, file_list, v_line, instruction, par1, par2, par3, par4, par5, par6, txt, len, file_name, file_line, last_sequ_num, last_sequ_ptr); while(instruction(1 to len) /= "ELSE" and instruction(1 to len) /= "ELSEIF" and instruction(1 to len) /= "END_IF") loop if(v_line < inst_sequ.num_of_lines) then v_line := v_line + 1; access_inst_sequ(inst_sequ, defined_vars, file_list, v_line, instruction, par1, par2, par3, par4, par5, par6, txt, len, file_name, file_line, last_sequ_num, last_sequ_ptr); else assert (false) report LF & "ERROR: ELSEIF instruction unable to find terminating" & LF & " ELSE, ELSEIF or END_IF statement." severity failure; end if; end loop; v_line := v_line - 1; -- re-align so it will be operated on. end if; end if; -------------------------------------------------------------------------------- elsif (instruction(1 to len) = "ELSE") then if(if_state = true) then -- if the if_state is true then skip the else v_line := v_line + 1; access_inst_sequ(inst_sequ, defined_vars, file_list, v_line, instruction, par1, par2, par3, par4, par5, par6, txt, len, file_name, file_line, last_sequ_num, last_sequ_ptr); while(instruction(1 to len) /= "END_IF") loop if(v_line < inst_sequ.num_of_lines) then v_line := v_line + 1; access_inst_sequ(inst_sequ, defined_vars, file_list, v_line, instruction, par1, par2, par3, par4, par5, par6, txt, len, file_name, file_line, last_sequ_num, last_sequ_ptr); else assert (false) report LF & "ERROR: IF instruction unable to find terminating" & LF & " ELSE, ELSEIF or END_IF statement." severity failure; end if; end loop; v_line := v_line - 1; -- re-align so it will be operated on. end if; -------------------------------------------------------------------------------- elsif (instruction(1 to len) = "END_IF") then null; -- instruction is a place holder for finding the end of IF. -------------------------------------------------------------------------------- elsif (instruction(1 to len) = "WHILE") then wh_state := false; case par2 is when 0 => if(par1 = par3) then wh_state := true; end if; when 1 => if(par1 > par3) then wh_state := true; end if; when 2 => if(par1 < par3) then wh_state := true; end if; when 3 => if(par1 /= par3) then wh_state := true; end if; when 4 => if(par1 >= par3) then wh_state := true; end if; when 5 => if(par1 <= par3) then wh_state := true; end if; when others => assert (false) report LF & "ERROR: WHILE instruction got an unexpected value" & LF & " in parameter 2!" & LF & "Found on line " & (ew_to_str(file_line,dec)) & " in file " & file_name severity failure; end case; if(wh_state = true) then wh_stack(wh_ptr) := v_line; wh_ptr := wh_ptr + 1; else wh_end := false; while(wh_end /= true) loop if(v_line < inst_sequ.num_of_lines) then v_line := v_line + 1; access_inst_sequ(inst_sequ, defined_vars, file_list, v_line, instruction, par1, par2, par3, par4, par5, par6, txt, len, file_name, file_line, last_sequ_num, last_sequ_ptr); else assert (false) report LF & "ERROR: WHILE instruction unable to find terminating" & LF & " END_WHILE statement." severity failure; end if; -- if is a while need to escape it if(instruction(1 to len) = "WHILE") then wh_dpth := wh_dpth + 1; -- if is the end_while we are looking for elsif(instruction(1 to len) = "END_WHILE") then if(wh_dpth = 0) then wh_end := true; else wh_dpth := wh_dpth - 1; end if; end if; end loop; end if; -------------------------------------------------------------------------------- elsif (instruction(1 to len) = "END_WHILE") then if(wh_ptr > 0) then v_line := wh_stack(wh_ptr - 1) - 1; wh_ptr := wh_ptr - 1; end if; -------------------------------------------------------------------------------- elsif (instruction(1 to len) = "MESSAGES_OFF") then messages := TRUE; -------------------------------------------------------------------------------- elsif (instruction(1 to len) = "MESSAGES_ON") then messages := FALSE; -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- USER Istruction area. Add all user instructions below this -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -- elsif (instruction(1 to len) = "RESET_SYS") then -------------------------------------------------------------------------------- -- USER Istruction area. Add all user instructions above this -------------------------------------------------------------------------------- -------------------------------------------------------------------------- -- catch those little mistakes else assert (false) report LF & "ERROR: Seems the command " & instruction(1 to len) & " was defined but" & LF & "was not found in the elsif chain, please check spelling." severity failure; end if; -- else if structure end -- after the instruction is finished print out any txt and sub vars txt_print_wvar(defined_vars, txt, hex); end loop; -- Main Loop end assert (false) report LF & "The end of the simulation! It was not terminated as expected." & LF severity failure; end process Read_file; end bhv; ------------------------------------------------------------------------------- -- Revision History: -- version 1.4 -- $Log: not supported by cvs2svn $ -- Revision 1.3 2007/11/14 02:35:56 sckoarn -- Fix to WHILE instruction: Change if_state typo to wh_state -- -- Revision 1.2 2007/09/02 04:04:04 sckoarn -- Update of version 1.2 tb_pkg -- See documentation for details -- -- Revision 1.1.1.1 2007/04/06 04:06:48 sckoarn -- Import of the vhld_tb -- -- -------------------------------------------------------------------------------
Go to most recent revision | Compare with Previous | Blame | View Log