URL
https://opencores.org/ocsvn/w11/w11/trunk
Subversion Repositories w11
[/] [w11/] [tags/] [w11a_V0.5/] [rtl/] [vlib/] [xlib/] [iob_reg_io_gen.vhd] - Rev 37
Go to most recent revision | Compare with Previous | Blame | View Log
-- $Id: iob_reg_io_gen.vhd 314 2010-07-09 17:38:41Z mueller $ -- -- Copyright 2007-2008 by Walter F.J. Mueller <W.F.J.Mueller@gsi.de> -- -- This program is free software; you may redistribute and/or modify it under -- the terms of the GNU General Public License as published by the Free -- Software Foundation, either version 2, or at your option any later version. -- -- This program is distributed in the hope that it will be useful, but -- WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- for complete details. -- ------------------------------------------------------------------------------ -- Module Name: iob_reg_io_gen - syn -- Description: Registered IOB, in/output, vector -- -- Dependencies: iob_keeper_gen [sim only] -- Test bench: - -- Target Devices: generic Spartan, Virtex -- Tool versions: xst 8.1, 8.2, 9.1, 9.2; ghdl 0.18-0.25 -- Revision History: -- Date Rev Version Comment -- 2008-05-22 149 1.0.4 use internally TE to match OBUFT T polarity -- 2008-05-22 148 1.0.3 remove UNISIM prim's; PULL implemented only for sim -- 2008-05-18 147 1.0.2 add PULL generic, to enable PULL-UP,-DOWN or KEEPER -- 2007-12-16 101 1.0.1 add INIT generic ports -- 2007-12-08 100 1.0 Initial version ------------------------------------------------------------------------------ library ieee; use ieee.std_logic_1164.all; use work.slvtypes.all; use work.xlib.all; entity iob_reg_io_gen is -- registered IOB, in/output, vector generic ( DWIDTH : positive := 16; -- data port width INITI : slbit := '0'; -- initial state ( in flop) INITO : slbit := '0'; -- initial state (out flop) INITE : slbit := '0'; -- initial state ( oe flop) PULL : string := "NONE"); -- pull-up,-down or keeper port ( CLK : in slbit; -- clock CEI : in slbit := '1'; -- clock enable ( in flops) CEO : in slbit := '1'; -- clock enable (out flops) OE : in slbit; -- output enable DI : out slv(DWIDTH-1 downto 0); -- input data (read from pad) DO : in slv(DWIDTH-1 downto 0); -- output data (write to pad) PAD : inout slv(DWIDTH-1 downto 0) -- i/o pad ); end iob_reg_io_gen; architecture syn of iob_reg_io_gen is signal R_TE : slbit := not INITE; signal R_DI : slv(DWIDTH-1 downto 0) := (others=>INITI); signal R_DO : slv(DWIDTH-1 downto 0) := (others=>INITO); constant all_z : slv(DWIDTH-1 downto 0) := (others=>'Z'); constant all_l : slv(DWIDTH-1 downto 0) := (others=>'L'); constant all_h : slv(DWIDTH-1 downto 0) := (others=>'H'); attribute iob : string; attribute iob of R_TE : signal is "true"; attribute iob of R_DI : signal is "true"; attribute iob of R_DO : signal is "true"; begin assert PULL="NONE" or PULL="UP" or PULL="DOWN" or PULL="KEEP" report "assert(PULL): only NONE, UP, DOWN, OR KEEP supported" severity failure; proc_regs: process (CLK) begin if CLK'event and CLK='1' then R_TE <= not OE; if CEI = '1' then R_DI <= to_x01(PAD); end if; if CEO = '1' then R_DO <= DO; end if; end if; end process proc_regs; proc_comb: process (R_TE, R_DO) begin if R_TE = '1' then PAD <= all_z; else PAD <= R_DO; end if; end process proc_comb; DI <= R_DI; -- Note: PULL (UP, DOWN or KEEP) is only implemented for simulation, not -- for inference in synthesis. Use pin attributes in UCF's or use -- iob_reg_io_gen_unisim -- -- synthesis translate_off PULL_UP: if PULL = "UP" generate PAD <= all_h; end generate PULL_UP; PULL_DOWN: if PULL = "DOWN" generate PAD <= all_l; end generate PULL_DOWN; PULL_KEEP: if PULL = "KEEP" generate KEEPER : iob_keeper_gen generic map (DWIDTH => DWIDTH) port map (PAD => PAD); end generate PULL_KEEP; -- synthesis translate_on end syn;
Go to most recent revision | Compare with Previous | Blame | View Log