Subversion Repositories w11

-- $Id: byte2word.vhd 432 2011-11-25 20:16:28Z mueller $
--
-- Copyright 2011- by Walter F.J. Mueller <W.F.J.Mueller@gsi.de>
--
-- This program is free software; you may redistribute and/or modify it under
-- the terms of the GNU General Public License as published by the Free
-- Software Foundation, either version 2, or at your option any later version.
--
-- This program is distributed in the hope that it will be useful, but
-- WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
-- or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-- for complete details.
--
------------------------------------------------------------------------------
-- Module Name:    byte2word - syn
-- Description:    2 byte -> 1 word stream converter
--
-- Dependencies:   -
-- Test bench:     -
-- Target Devices: generic
-- Tool versions:  xst 12.1; ghdl 0.29
--
-- Revision History: 
-- Date         Rev Version  Comment
-- 2011-11-21   432   1.0.1  now numeric_std clean
-- 2011-07-30   400   1.0    Initial version 
------------------------------------------------------------------------------
 
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
 
use work.slvtypes.all;
 
entity byte2word is                     -- 2 byte -> 1 word stream converter
  port (
    CLK : in slbit;                     -- clock
    RESET : in slbit;                   -- reset
    DI : in slv8;                       -- input data (byte)
    ENA : in slbit;                     -- write enable
    BUSY : out slbit;                   -- write port hold    
    DO : out slv16;                     -- output data (word)
    VAL : out slbit;                    -- read valid
    HOLD : in slbit;                    -- read hold
    ODD : out slbit                     -- odd byte pending
  );
end byte2word;
 
 
architecture syn of byte2word is
 
  type state_type is (
    s_idle,
    s_vall,
    s_valw
  );
 
  type regs_type is record
    datl : slv8;                        -- lsb data
    dath : slv8;                        -- msb data
    state : state_type;                 -- state
  end record regs_type;
 
  constant regs_init : regs_type := (
    (others=>'0'),
    (others=>'0'),
    s_idle
  );
 
  signal R_REGS : regs_type := regs_init;  -- state registers
  signal N_REGS : regs_type := regs_init;  -- next value state regs
 
begin
 
  proc_regs: process (CLK)
  begin
 
    if rising_edge(CLK) then
      if RESET = '1' then
        R_REGS <= regs_init;
      else
        R_REGS <= N_REGS;        
      end if;
    end if;
 
  end process proc_regs;
 
  proc_next: process (R_REGS, DI, ENA, HOLD)
 
    variable r : regs_type := regs_init;
    variable n : regs_type := regs_init;
 
    variable ival  : slbit := '0';
    variable ibusy : slbit := '0';
    variable iodd  : slbit := '0';
 
  begin
 
    r := R_REGS;
    n := R_REGS;
 
    ival  := '0';
    ibusy := '0';
    iodd  := '0';
 
    case r.state is
 
      when s_idle =>
        if ENA = '1' then
          n.datl := DI;
          n.state := s_vall;
        end if;
 
      when s_vall =>
        iodd := '1';
        if ENA = '1' then
          n.dath := DI;
          n.state := s_valw;
        end if;
 
      when s_valw =>
        ival := '1';
        if HOLD = '0' then
          if ENA = '1' then
            n.datl := DI;
            n.state := s_vall;
          else
            n.state := s_idle;
          end if;
        else
          ibusy := '1';
        end if;
 
      when others => null;
    end case;
 
    N_REGS <= n;
 
    DO   <= r.dath & r.datl;
    VAL  <= ival;
    BUSY <= ibusy;
    ODD  <= iodd;
 
  end process proc_next;
 
 
end syn;