URL
https://opencores.org/ocsvn/w11/w11/trunk
Subversion Repositories w11
[/] [w11/] [tags/] [w11a_V0.6/] [rtl/] [w11a/] [pdp11_bram.vhd] - Rev 13
Go to most recent revision | Compare with Previous | Blame | View Log
-- $Id: pdp11_bram.vhd 427 2011-11-19 21:04:11Z mueller $ -- -- Copyright 2008-2011 by Walter F.J. Mueller <W.F.J.Mueller@gsi.de> -- -- This program is free software; you may redistribute and/or modify it under -- the terms of the GNU General Public License as published by the Free -- Software Foundation, either version 2, or at your option any later version. -- -- This program is distributed in the hope that it will be useful, but -- WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- for complete details. -- ------------------------------------------------------------------------------ -- Module Name: pdp11_bram - syn -- Description: pdp11: BRAM based ext. memory dummy -- -- Dependencies: memlib/ram_2swsr_rfirst_gen -- Test bench: - -- Target Devices: generic -- Tool versions: xst 8.2, 9.1, 9.2, 13.1; ghdl 0.18-0.29 -- Revision History: -- Date Rev Version Comment -- 2011-11-18 427 1.0.3 now numeric_std clean -- 2008-03-01 120 1.0.2 add addrzero constant to avoid XST errors -- 2008-02-23 118 1.0.1 AWIDTH now a generic port -- 2008-02-17 117 1.0 Initial version ------------------------------------------------------------------------------ library ieee; use ieee.std_logic_1164.all; use ieee.numeric_std.all; use work.slvtypes.all; use work.memlib.all; use work.pdp11.all; entity pdp11_bram is -- cache generic ( AWIDTH : positive := 14); -- address width port ( CLK : in slbit; -- clock GRESET : in slbit; -- global reset EM_MREQ : in em_mreq_type; -- em request EM_SRES : out em_sres_type -- em response ); end pdp11_bram; architecture syn of pdp11_bram is type regs_type is record req_r : slbit; -- read request req_w : slbit; -- write request be : slv2; -- byte enables addr : slv(AWIDTH-1 downto 1); -- address end record regs_type; constant addrzero : slv(AWIDTH-1 downto 1) := (others=>'0'); constant regs_init : regs_type := ( '0','0', -- req_r,w (others=>'0'), -- be addrzero -- addr ); signal R_REGS : regs_type := regs_init; -- state registers signal N_REGS : regs_type := regs_init; -- next value state regs signal MEM_ENB : slbit := '0'; signal MEM_WEA : slv2 := "00"; signal MEM_DOA : slv16 := (others=>'0'); begin MEM_BYT0 : ram_2swsr_rfirst_gen generic map ( AWIDTH => AWIDTH-1, DWIDTH => 8) port map ( CLKA => CLK, CLKB => CLK, ENA => EM_MREQ.req, ENB => MEM_ENB, WEA => MEM_WEA(0), WEB => R_REGS.be(0), ADDRA => EM_MREQ.addr(AWIDTH-1 downto 1), ADDRB => R_REGS.addr, DIA => EM_MREQ.din(7 downto 0), DIB => MEM_DOA(7 downto 0), DOA => MEM_DOA(7 downto 0), DOB => open ); MEM_BYT1 : ram_2swsr_rfirst_gen generic map ( AWIDTH => AWIDTH-1, DWIDTH => 8) port map ( CLKA => CLK, CLKB => CLK, ENA => EM_MREQ.req, ENB => MEM_ENB, WEA => MEM_WEA(1), WEB => R_REGS.be(1), ADDRA => EM_MREQ.addr(AWIDTH-1 downto 1), ADDRB => R_REGS.addr, DIA => EM_MREQ.din(15 downto 8), DIB => MEM_DOA(15 downto 8), DOA => MEM_DOA(15 downto 8), DOB => open ); proc_regs: process (CLK) begin if rising_edge(CLK) then if GRESET = '1' then R_REGS <= regs_init; else R_REGS <= N_REGS; end if; end if; end process proc_regs; N_REGS.req_r <= EM_MREQ.req and not EM_MREQ.we; N_REGS.req_w <= EM_MREQ.req and EM_MREQ.we; N_REGS.be <= EM_MREQ.be; N_REGS.addr <= EM_MREQ.addr(N_REGS.addr'range); MEM_WEA(0) <= EM_MREQ.we and EM_MREQ.be(0); MEM_WEA(1) <= EM_MREQ.we and EM_MREQ.be(1); MEM_ENB <= EM_MREQ.cancel and R_REGS.req_w; EM_SRES.ack_r <= R_REGS.req_r; EM_SRES.ack_w <= R_REGS.req_w; EM_SRES.dout <= MEM_DOA; end syn;
Go to most recent revision | Compare with Previous | Blame | View Log