URL
https://opencores.org/ocsvn/w11/w11/trunk
Subversion Repositories w11
[/] [w11/] [tags/] [w11a_V0.61/] [doc/] [README-w11a_V.50-w11a_V0.60.txt] - Rev 16
Go to most recent revision | Compare with Previous | Blame | View Log
# $Id: README.txt 442 2011-12-23 10:03:28Z mueller $
Release notes for w11a
Table of content:
1. Documentation
2. Files
3. Change Log
1. Documentation -------------------------------------------------------------
More detailed information on installation, build and test can be found
in the doc directory, specifically
* README.txt: release notes
* INSTALL.txt: installation and building test benches and systems
* w11a_tb_guide.txt: running test benches
* w11a_os_guide.txt: booting operating systems
* w11a_known_issues.txt: known differences, limitations and issues
2. Files ---------------------------------------------------------------------
doc Documentation
rtl VHDL sources
rtl/bplib - board and component support libs
rtl/bplib/atlys - for Digilent Atlys board
rtl/bplib/issi - for ISSI parts
rtl/bplib/micron - for Micron parts
rtl/bplib/nexys2 - for Digilent Nexsy2 board
rtl/bplib/nexys3 - for Digilent Nexsy3 board
rtl/bplib/nxcramlib - for CRAM part used in Nexys2/3
rtl/bplib/s3board - for Digilent S3BOARD
rtl/ibus - ibus devices (UNIBUS peripherals)
rtl/sys_gen - top level designs
rtl/sys_gen/tst_rlink - top level designs for an rlink tester
nexys2,nexys3,s3board - systems for Nexsy2,Nexsy3,S3BOARD
rtl/sys_gen/tst_serloop - top level designs for serport loop tester
nexys2,nexys3,s3board - systems for Nexsy2,Nexsy3,S3BOARD
rtl/sys_gen/tst_snhumanio - top level designs for human I/O tester
atlys,nexys2,nexys3,s3board - systems for Atlys,Nexsy2,Nexsy3,S3BOARD
rtl/sys_gen/w11a - top level designs for w11a SoC
nexys2,nexys3,s3board - w11a systems for Nexsy2,Nexsy3,S3BOARD
rtl/vlib - VHDL component libs
rtl/vlib/comlib - communication
rtl/vlib/genlib - general
rtl/vlib/memlib - memory
rtl/vlib/rbus - rri: rbus
rtl/vlib/rlink - rri: rlink
rtl/vlib/serport - serial port (UART)
rtl/vlib/simlib - simulation helper lib
rtl/vlib/xlib - Xilinx specific components
rtl/w11a - w11a core
tools helper programs
tools/bin - scripts and binaries
tools/dox - Doxygen documentation configuration
tools/make - make includes
tools/src - C++ sources
tools/src/librlink - basic rlink interface
tools/src/librlinktpp - C++ to tcl binding for rlink interface
tools/src/librtools - general support classes and methods
tools/src/librtcltools - support classes to implement Tcl bindings
tools/src/librutiltpp - Tcl support commands implemented in C++
tools/tcl - Tcl scripts
3. Change Log ----------------------------------------------------------------
- trunk (2011-12-23: svn rev 16(oc) 442(wfjm); untagged w11a_V0.55) +++++++++
- Summary
- added xon/xoff (software flow control) support to serport library
- added test systems for serport verification
- use new serport stack in sys_w11a_* and sys_tst_rlink_* systems
- Changes
- retired modules
- vlib/rlink
- rlink_rlb2rl - obsolete, now all in rlink_core8
- rlink_base - use now new rlink_core8
- rlink_serport - obsolete, now all in rlink_sp1c
- rlink_base_serport - use now new rlink_sp1c
- New features
- new modules
- vlib/serport
- serport_xonrx - xon/xoff logic rx path
- serport_xontx - xon/xoff logic tx path
- serport_1clock - serial port module (uart, fifo, flow control)
- vlib/rlink
- rlink_core8 - rlink core8 with 8bit interface
- rlink_sp1c - rlink_core8 + serport_1clock combo
- new unit tests
- bplib/s3board/tb/tb_s3_sram_memctl (for s3board sram controller
- bplib/nxcramlib/tb/tb_nx_cram_memctl_as (for nexys2,3 cram controller)
- new systems
- sys_gen/tst_serloop/nexys2/sys_tst_serloop1_n2
- sys_gen/tst_serloop/nexys3/sys_tst_serloop1_n3
- sys_gen/tst_serloop/s3board/sys_tst_serloop1_s3
- sys_gen/tst_rlink/s3board/sys_tst_rlink_s3
- trunk (2011-12-04: svn rev 15(oc) 436(wfjm); untagged w11a_V0.54) +++++++++
- Summary
- added support for nexys3 board for w11a
- Changes
- module renames:
bplib/nexys2/n2_cram_dummy -> bplib/nxcramlib/nx_cram_dummy
bplib/nexys2/n2_cram_memctl_as -> bplib/nxcramlib/nx_cram_memctl_as
- New features
- new systems
- sys_gen/w11a/nexys3/sys_w11a_n3
- sys_gen/w11a/nexys3/sys_tst_rlink_n3
- Bug fixes
- tools/src/lib*: backend libraries compile now on 64 bit systems
- trunk (2011-11-20: svn rev 14(oc) 428(wfjm); untagged w11a_V0.532) +++++++++
- Summary
- generalized the 'human I/O' interface for s3board,nexys2/3 and atlys
- added test design for the 'human I/O' interface
- no functional change of w11a CPU core or any existing test systems
- Changes
- functional changes
- use now 'a6' polynomial of Koopman et al for crc8 in rlink
- with one exception all vhdl sources use now numeric_std
- module renames:
vlib/xlib/dcm_sp_sfs_gsim -> vlib/xlib/dcm_sfs_gsim
vlib/xlib/dcm_sp_sfs_unisim -> vlib/xlib/dcm_sfs_unisim_s3e
vlib/xlib/tb/tb_dcm_sp_sfs -> vlib/xlib/tb/tb_dcm_sfs
- New features
- new modules
- rtl/sys_gen/tst_snhumanio
- sub-tree with test design for 'human I/O' interface modules
- atlys, nexys2, and s3board directories contain the systems
for the respective Digilent boards
- trunk (2011-09-11: svn rev 12(oc) 409(wfjm); untagged w11a_V0.531) +++++++++
- Summary
- Many small changes to prepare upcoming support for
- Spartan-6 boards (nexys3 and atlys)
- usage of Cypress FX2 USB interface on nexys2/3 and atlys boards
- no functional change of w11a CPU core or any test systems
- Changes
- use boost libraries instead of custom coding:
- boost/function and /bind for callbacks, retire RmethDscBase and RmethDsc
- boost/foreach for some iterator loops
Note: boost 1.35 and gcc 4.3 or newer is required, see INSTALL.txt
- module renames:
bplib/s3board/s3_rs232_iob_int -> bplib/bpgen/bp_rs232_2line_iob
bplib/s3board/s3_rs232_iob_ext -> bplib/bpgen/bp_rs232_4line_iob
bplib/s3board/s3_dispdrv -> bplib/bpgen/sn_4x7segctl
bplib/s3board/s3_humanio -> bplib/bpgen/sn_humanio
bplib/s3board/s3_humanio_rbus -> bplib/bpgen/sn_humanio_rbus
- other renames:
tools/bin/impact_wrapper -> tools/bin/config_wrapper
- reorganize Makefile includes and xflow option files
rtl/vlib/Makefile.ghdl -> rtl/make/generic_ghdl.mk
rtl/vlib/Makefile.isim -> rtl/make/generic_isim.mk
rtl/vlib/Makefile.xflow -> rtl/make/generic_xflow.mk
rtl/vlib/xst_vhdl.opt -> rtl/make/syn_s3_speed.opt
rtl/vlib/balanced.opt -> rtl/make/imp_s3_speed.opt
- trunk (2011-04-17: svn rev 11(oc) 376(wfjm); untagged w11a_V0.53) ++++++++++
- Summary
- Introduce C++ and Tcl based backend server. A set of C++ classes provide
the basic rlink communication primitives. Additional glue classes provide
a Tcl binding. This first phase contains the basic functionality needed
to control simple test benches.
- add an 'rlink exerciser' (tst_rlink) and a top level design for a Nexys2
board (sys_tst_rlink_n2) and a test suite implemented in Tcl.
- Note: No functional changes in w11a core and I/O system at this point!
The w11a demonstrator systems are still operated with the old
backend code (pi_rri).
- New features
- new directory trees for
- C++ sources of backend (plus make and doxygen documentation support)
- tools/dox - Doxygen documentation configuration
- tools/make - make includes
- tools/src/librlink - basic rlink interface
- tools/src/librlinktpp - C++ to tcl binding for rlink interface
- tools/src/librtools - general support classes and methods
- tools/src/librtcltools - support classes to implement Tcl bindings
- tools/src/librutiltpp - Tcl support commands implemented in C++
- VHDL sources of an 'rlink exerciser'
- rtl/sys_gen/tst_rlink - top level designs for an rlink tester
- rtl/sys_gen/tst_rlink/nexys2 - rlink tester system for Nexsy2 board
- Tcl sources of 'rlink exerciser'
- tools/tcl/rlink - defs and proc's for basic rlink functions
- tools/tcl/rutil - general support procs
- tools/tcl/rbtest - defs and proc's for rbd_tester
- tools/tcl/rbbram - defs and proc's for rbd_bram
- tools/tcl/rbmoni - defs and proc's for rbd_rbmon
- tools/tcl/rbs3hio - defs and proc's for s3_humanio_rbus
- tools/tcl/tst_rlink - defs and proc's for tst_rlink
- new modules
- rtl/vlib/rbus
- rbd_bram - rbus bram test target
- rbd_eyemon - eye monitor for serport's
- rbd_rbmon - rbus monitor
- rbd_tester - rbus tester
- rbd_timer - usec precision timer
- rtl/vlib/memlib
- additional wrappers for distributed and block memories added
- tools/bin
- ti_rri: Tcl driver for rlink tests and servers (will replace pi_rri)
- trunk (2011-01-02: svn rev 9(oc) 352(wfjm); untagged w11a_V0.52) +++++++++++
- Summary
- Introduce rbus protocol V3
- reorganize rbus and rlink modules, many renames
- Changes
- module renames:
- the rri (remote-register-interface) components were re-organized and
cleanly separated into rbus and rlink components:
rri/rb_sres_or_* -> rbus/rb_sres_or_*
rri/rri_core -> rlink/rlink_core
rri/rri_base_serport -> rlink/rlink_base_serport
rri/rrilib -> rbus/rblib
-> rlink/rlinklib
rri/rri_serport -> rlink/rlink_serport
rri/tb/rritb_sres_or_mon -> rbus/rb_sres_or_mon
- the rri test bench monitors were reorganized and renamed
rri/tb/rritb_cpmon -> rlink/rlink_mon
rri/tb/rritb_cpmon_sb -> rlink/rlink_mon_sb
rri/tb/rritb_rbmon -> rbus/rb_mon
rri/tb/rritb_rbmon_sb -> rbus/rb_mon_sb
- the rri low level test bench were also renamed
rri/tb/tb_rri -> rlink/tb/tb_rlink
rri/tb/tb_rri_core -> rlink/tb/tb_rlink_direct
rri/tb/tb_rri_serport -> rlink/tb/tb_rlink_serport
- the base modules for rlink+cext based test benches were renamed
rri/tb/rritb_core_cm -> rlink/tb/tbcore_rlink_dcm
rri/tb/rritb_core -> rlink/tb/tbcore_rlink
rri/tb/vhpi_rriext -> rlink/tb/rlink_cext_vhpi
rri/tb/cext_rriext.c -> rlink/tb/rlink_cext.c
- other rri/rbus related renames
bplib/s3board/s3_humanio_rri -> s3_humanio_rbus
w11a/pdp11_core_rri -> pdp11_core_rbus
- other renames
w11a/tb/tb_pdp11_core -> tb_pdp11core
- signal renames:
- rlink interface (defined in rlink/rlinklib.vhd):
- rename rlink port signals:
CP_* -> RL_*
- rename status bit names to better reflect their usage in v3:
ccrc -> cerr - indicates cmd crc error or other cmd level abort
dcrc -> derr - indicates data crc error or other data level abort
ioto -> rbnak - indicates rbus abort, either no ack or timeout
ioerr -> rberr - indicates that rbus err flag was set
- migrate to rbus protocol version 3
- in rb_mreq use now aval,re,we instead of req,we
- basic rbus transaction now takes 2 cycles, one for address select, one
for data exchange. Same concept and reasoning behind as in ibus V2.
- vlib/rlink/rlink_core
- cerr and derr state flags now set on command or data crc errors as well
as on eop/nak aborts when command or wblk data is received.
- has now 'monitor port', RL_MONI.
- RL_FLUSH port removed, the flush logic is now in rlink_serport
- restructured rlink modules
- rlink_core is the rlink protocol engine with a 9 bit wide interface
- rlink_rlb2rl (new) is an adapter to a byte wide interface
- rlink_base (new) combines rlink_core and rlink_rlb2rl
- rlink_serport (re-written) is an adapter to a serial interface
- rlink_base_serport (renamed) combines rlink_base and rlink_serport
- New features
- vlib/rbus
- added several rbus devices useful for debugging
- rbd_tester: test target, used for example in test benches
- trunk (2010-11-28: svn rev 8(oc) 341(wfjm); untagged w11a_V0.51) +++++++++++
- Summary
- Introduce ibus protocol V2
- Nexys2 systems use DCM
- sys_w11a_n2 now runs with 58 MHz
- Changes
- module renames:
- in future 'box' is used for large autonomous blocks, therefore use
the term unit for purely sequential logic modules:
pdp11_abox -> pdp11_ounit
pdp11_dbox -> pdp11_aunit
pdp11_lbox -> pdp11_lunit
pdp11_mbox -> pdp11_munit
- signal renames:
- renamed RRI_LAM -> RB_LAM in all ibus devices
- renamed CLK -> I_CLK50 in all top level nexys2 and s3board designs
- migrate to ibus protocol version 2
- in ib_mreq use now aval,re,we,rmw instead of req,we,dip
- basic ibus transaction now takes 2 cycles, one for address select, one
for data exchange. This avoids too long logic paths in the ibus logic.
- New features
- ibus
- added ib_sres_or_mon to check for miss-behaving ibus devices
- added ib_sel to encapsulate address select logic
- nexys2 systems
- now DCM derived system clock supported
- sys_gen/w11a/nexys2
- sys_w11a_n2 now runs with 58 MHz clksys
- Bug fixes
- rtl/vlib/Makefile.xflow: use default .opt files under rtl/vlib again.
- w11a_V0.5 (2010-07-23) +++++++++++++++++++++++++++++++++++++++++++++++++++++
Initial release with
- w11a CPU core
- basic set of peripherals: kw11l, dl11, lp11, pc11, rk11/rk05
- just for fun: iist (not fully implemented and tested yet)
- two complete system configurations with
- for a Digilent S3BOARD rtl/sys_gen/w11a/s3board/sys_w11a_s3
- for a Digilent Nexys2 rtl/sys_gen/w11a/nexys2/sys_w11a_n2
Go to most recent revision | Compare with Previous | Blame | View Log