URL
https://opencores.org/ocsvn/w11/w11/trunk
Subversion Repositories w11
[/] [w11/] [tags/] [w11a_V0.61/] [doc/] [README-w11a_V.50-w11a_V0.60.txt] - Rev 36
Go to most recent revision | Compare with Previous | Blame | View Log
$Id: README-w11a_V.50-w11a_V0.60.txt 578 2014-08-05 21:28:19Z mueller $
Release notes for w11a
Table of content:
1. Documentation
2. Files
3. Change Log
1. Documentation -------------------------------------------------------------
More detailed information on installation, build and test can be found
in the doc directory, specifically
* README.txt: release notes
* INSTALL.txt: installation and building test benches and systems
* w11a_tb_guide.txt: running test benches
* w11a_os_guide.txt: booting operating systems
* w11a_known_issues.txt: known differences, limitations and issues
2. Files ---------------------------------------------------------------------
doc Documentation
doc/man man pages for retro11 commands
rtl VHDL sources
rtl/bplib - board and component support libs
rtl/bplib/atlys - for Digilent Atlys board
rtl/bplib/fx2lib - for Cypress FX2 USB interface controller
rtl/bplib/issi - for ISSI parts
rtl/bplib/micron - for Micron parts
rtl/bplib/nexys2 - for Digilent Nexsy2 board
rtl/bplib/nexys3 - for Digilent Nexsy3 board
rtl/bplib/nxcramlib - for CRAM part used in Nexys2/3
rtl/bplib/s3board - for Digilent S3BOARD
rtl/ibus - ibus devices (UNIBUS peripherals)
rtl/sys_gen - top level designs
rtl/sys_gen/tst_fx2loop - top level designs for Cypress FX2 tester
nexys2,nexys3 - systems for Nexsy2,Nexsy3
rtl/sys_gen/tst_rlink - top level designs for an rlink tester
nexys2,nexys3,s3board - systems for Nexsy2,Nexsy3,S3BOARD
rtl/sys_gen/tst_rlink_cuff - top level designs for rlink over FX2 tester
nexys2,nexys3,atlys - systems for Atlys,Nexsy2,Nexsy3
rtl/sys_gen/tst_serloop - top level designs for serport loop tester
nexys2,nexys3,s3board - systems for Nexsy2,Nexsy3,S3BOARD
rtl/sys_gen/tst_snhumanio - top level designs for human I/O tester
atlys,nexys2,nexys3,s3board - systems for Atlys,Nexsy2,Nexsy3,S3BOARD
rtl/sys_gen/w11a - top level designs for w11a SoC
nexys2,nexys3,s3board - w11a systems for Nexsy2,Nexsy3,S3BOARD
rtl/vlib - VHDL component libs
rtl/vlib/comlib - communication
rtl/vlib/genlib - general
rtl/vlib/memlib - memory
rtl/vlib/rbus - rri: rbus
rtl/vlib/rlink - rri: rlink
rtl/vlib/serport - serial port (UART)
rtl/vlib/simlib - simulation helper lib
rtl/vlib/xlib - Xilinx specific components
rtl/w11a - w11a core
tools helper programs
tools/asm-11 - pdp-11 assembler code
tools/asm-11/tests - test bench for asm-11
tools/asm-11/tests-err - test bench for asm-11 (error check part)
tools/bin - scripts and binaries
tools/dox - Doxygen documentation configuration
tools/make - make includes
tools/fx2 - Firmware for Cypress FX2 USB Interface
tools/fx2/bin - pre-build firmware images in .ihx format
tools/fx2/src - C and asm sources
tools/fx2/sys - udev rules for USB on fpga eval boards
tools/oskit - setup files for Operation System kits
tools/oskit/... - several PDP-11 system kits available
tools/src - C++ sources for rlink backend software
tools/src/librlink - basic rlink interface
tools/src/librlinktpp - C++ to tcl binding for rlink interface
tools/src/librtcltools - support classes to implement Tcl bindings
tools/src/librtools - general support classes and methods
tools/src/librutiltpp - Tcl support commands implemented in C++
tools/src/librw11 - w11 over rlink interface
tools/src/librwxxtpp - C++ to tcl binding for w11 over rlink iface
tools/tbench - w11 CPU test bench
tools/tcl - Tcl scripts
3. Change Log ----------------------------------------------------------------
- w11a_V0.50 -> w11a_V0.60 cummulative summary of key changes
- revised ibus protocol V2 (in w11a_V0.51)
- revised rbus protocol V3 (in w11a_V0.52)
- backend server rewritten in C++ and Tcl (in w11a_V0.53 and w11a_V0.562)
- add Nexys3 port of w11a (in w11a_V0.54)
- add Cypress FX2 support (in w11a_V0.56 and w11a_V0.57)
- added LP11,PC11 support (in w11a_V0.58)
- reference system now ISE 14.7 and Ubuntu 12.04 64 bit, ghdl 0.31
- many code cleanups; use numeric_std
- many documentation improvements
- development status upgraded to beta (from alpha)
- trunk (2014-06-06: svn rev 25(oc) 559+(wfjm); tagged w11a_V0.60) +++++++++
- Summary
- many documentation updates; no functional changes
- New features
- Tarballs with ready to use bit files and and all logfiles from the tool
chain can be downloaded from
http://www.retro11.de/data/oc_w11/bitkits/
This area is organized in folders for different releases. The tarball
file names contain information about release, Xlinix tool, and design.
- Changes
- documentation updates
- URL of oskits changed, they are now unter
http://www.retro11.de/data/oc_w11/oskits
- trunk (2014-05-29: svn rev 22(oc) 556(wfjm); untagged w11a_V0.581) ++++++++
- Summary
- new reference system
- switched from ISE 13.3 to 14.7.
- map/par behaviour changed, unfortunately unfavorably for w11a.
On Nexys3 no timing closure anymore for 80 MHz, only 72 MHz can
be achieved now.
- new man pages (in doc/man/man1/)
- support for Spartan-6 CMTs in PLL and DCM mode
- New features
- new modules
- rtl/vlib/xlib
- s6_cmt_sfs_unisim - Spartan-6 CMT for simple frequency synthesis
- s6_cmt_sfs_gsim - dito, simple ghdl simulation model
- tools/src/librutiltpp
- RtclSignalAction - Tcl signal handler
- RtclSystem - Tcl Unix system interface
- new files
- tools/bin/create_disk - creates a disk container file
- tools/bin/xtwi - Xilinx Tool Wrapper script for ISE
- tools/tcl/rw11/defs.tcl - w11a definitions
- Changes
- rtl/make
- imp_*.opt - use -fastpaths, -u, -tsi for trce
- imp_s6_speed.opt - adopt for ISE 14.x
- generic_xflow.mk - use xtwi; trce tsi file; use -C for cpp
- generic_isim.mk - use xtwi
- generic_xflow_cpld.mk - use xtwi
- rtl/sys_gen/*/nexys3
- .../sys_*.vhd - pll support, use clksys_vcodivide ect
- rtl/sys_gen/w11a/nexys3
- sys_conf.vhd - use 72 MHz, no closure in ISE 14.x for 80
- rtl/bplib/nexys(2|3)
- nexys(2|3)_time_fx2_ic.ucf - add VALID for hold time check
- tools/src/librwxxtpp
- RtclRw11Cpu - cp command options modified
- tools/bin
- vbomconv - add --viv_vhdl (for Vivado)
- tools/tcl/rw11
- util.tcl - move definitions to defs.tcl
- Bug fixes
- tools/src/librtools/RlogFile - fix date print (month was off by one)
- tools/tcl/rw11/asm.tcl - asmwait checks now pc if stop: defined
- Other updates
- INSTALL_ghdl.txt - text reflects current situation on ghdl packages
- trunk (2013-05-12: svn rev 21(oc) 518+(wfjm); untagged w11a_V0.58) ++++++++
- Summary
- C++ and Tcl based backend server now fully functional, supports with
DL11, RK11, LP11 and PC11 all devices available in w11a designs
- the old perl based backend server (pi_rri) is obsolete and removed
- operating system kits reorganized
- New features
- new directory trees for
- tools/oskit - operating system kits
- new modules
- tools/src/librw11
- Rw11*LP11 - classes for LP11 printer handling
- Rw11*PC11 - classes for PC11 paper tape handling
- Rw11*Stream* - classes for Virtual stream handling
- tools/src/librwxxtpp
- RtclRw11*LP11 - tcl iface for LP11 printer handling
- RtclRw11*PC11 - tcl iface for PC11 paper tape handling
- RtclRw11*Stream* - tcl iface for Virtual Stream handling
- Changes
- renames
- the w11 backend quick starter now named ti_w11 and under tools/bin
(was rtl/sys_gen/w11a/tb/torri)
- all operating system image related material now under
tools/oskit (was under rtl/sys_gen/w11a/tb)
- Bug fixes
- rtl/ibus/ibdr_lp11 - err flag logic fixed, was cleared in ibus racc read
- rtl/ibus/ibdr_pc11 - rbuf logic fixed. Was broken since ibus V2 update
in V0.51! Went untested because pc11 rarely used.
- trunk (2013-04-27: svn rev 20(oc) 511(wfjm); untagged w11a_V0.57) +++++++++
- Summary
- new C++ and Tcl based backend server supports now RK11 handling
- w11a systems operate with rlink over USB on nexsy2 and nexsy3 boards.
See w11a_os_guide.txt for details
- New features
- new modules
- rtl/bplib/fx2rlink - new vhdl lib with rlink over fx2 modules
- ioleds_sp1c_fx2 - io activity leds for rlink_sp1c_fx2
- rlink_sp1c_fx2 - rlink over serport + fx2 combo
- tools/src/librw11
- Rw11*RK11 - classes for RK11 disk handling
- Rw11*Disk* - classes for Virtual disk handling
- tools/src/librwxxtpp
- RtclRw11*RK11 - tcl iface for RK11 disk handling
- RtclRw11*Disk* - tcl iface for Virtual disk handling
- new files
- rtl/sys_gen/w11a/tb/torri - quick starter for new backend
- Changes
- tcl module renames:
tools/tcl/rw11a -> tools/tcl/rw11
- Bug fixes
- tools/src/ReventLoop: poll list update logic in DoPoll() corrected
- trunk (2013-04-13: svn rev 19(oc) 505(wfjm); untagged w11a_V0.562) +++++++++
- Summary
- V0.53 introduced a new C++ and Tcl based backend server, but only the
very basic rlink handling layer. This step release add now many support
classes for interfacing to w11 system designs, and the associated Tcl
bindings.
- add 'asm-11', a simple, Macro-11 syntax subset combatible, assembler.
Can be used stand-alone to generate 'absolute loader' format files,
but also integrates tightly into the Tcl environment and is used as
building block in the creation of CPU test benches.
- use now doxygen 1.8.3.1, generate c++,tcl, and vhdl source docs
See section 9. in INSTALL.txt for details.
- New features
- new directory trees for
- tools/asm-11 - asm-11 code
- tools/asm-11/tests - test bench for asm-11
- tools/asm-11/tests-err - test bench for asm-11 (error check part)
- tools/src/librw11 - w11 over rlink interface
- tools/src/librwxxtpp - C++ to tcl binding for w11 over rlink iface
- tools/tbench - w11 CPU test bench
- new modules
- tools/bin
- asm-11 - simple, Macro-11 syntax subset compatible, assembler
- asm-11_expect - expect checker for asm-11 test bench
- tools/dox
- *.Doxyfile - new descriptors c++,tcl,vhdl docs
- make_dox - driver script to generate c++,tcl,vhdl doxygen docs
- Changes
- vhdl module renames:
vlib/serport -> vlib/serportlib
- vhdl module splits:
bplib/bpgen/bpgenlib -> bpgenlib + bpgenrbuslib
- C++ class splits
librtcltools/RtclProxyBase -> RtclCmdBase + RtclProxyBase
- trunk (2013-01-06: svn rev 18(oc) 472(wfjm); untagged w11a_V0.561) +++++++++
- Summary
- Added simple simulation model of Cypress FX2 and test benches for
functional verifcation of FX2 controller
- Bugfixes in FX2 firmware and controller, works now also on Nexys3 & Atlys
- Added test systems for rlink over USB verification for Nexys3 & Atlys
- New features
- new test benches
- rtl/sys_gen/tst_rlink_cuff/nexys2/ic/tb/tb_tst_rlink_cuff_ic_n2
- new systems
- rtl/sys_gen/tst_rlink_cuff/nexys2/ic/sys_tst_rlink_cuff_ic_n3
- rtl/sys_gen/tst_rlink_cuff/nexys2/ic/sys_tst_rlink_cuff_ic_atlys
- Bug fixes
- tools/fx2/src: FX2 firmware now properly re-initializes hardware registers
and will work on Nexys3 and Atlys boards with default Digilent EPROM
- rtl/bplib/fx2lib: read pipeline logic in FX2 controller corrected
- trunk (2013-01-02: svn rev 17(oc) 467(wfjm); untagged w11a_V0.56) ++++++++++
- Summary
- re-organized handling of board and derived clocks in test benches
- added message filter definitions for some designs (.mfset files)
- added Cypress EZ-USB FX2 controller (USB interface)
- added firmware for EZ-USB FX2 supporting jtag access and data transfer
- FPGA configure over USB now supported directly in make build flow
- added test systems for USB testing and rlink over USB verification
- no functional change of w11a CPU core or any pre-existing test systems
- Note: Carefully read the disclaimer about usage of USB VID/PID numbers
in the file README_USB-VID-PID.txt. You'll be responsible for any
misuse of the defaults provided with the project sources !!
- New reference system
The development and test system was upgraded from Kubuntu 10.04 to 12.04.
The version of several key tools and libraries changed:
linux kernel 3.2.0 (was 2.6.32)
gcc/g++ 4.6.3 (was 4.4.3)
boost 1.46.1 (was 1.40)
libusb 1.0.9 (was 1.0.6)
perl 5.14.2 (was 5.10.1)
tcl 8.5.11 (was 8.4.19)
xilinx ise 13.3 (was 13.1)
--> see INSTALL.txt, INSTALL_ghdl.txt and INSTALL_urjtag.txt
- New features
- added firmware for Cypress FX2 controller
- tools/fx2
- bin - pre-build firmware images in .ihx file format
- src - C and asm sources
- sys - udev rules for usb interfaces on fpga eval boards
- new modules
- rtl/bplib/fx2lib
- fx2_2fifoctl_ic - Cypress EZ-USB FX2 controller (2 fifo; int clk)
- fx2_3fifoctl_ic - Cypress EZ-USB FX2 controller (3 fifo; int clk)
- new systems
- rtl/sys_gen/tst_fx2loop/nexys2/ic/sys_tst_fx2loop_ic_n2
- rtl/sys_gen/tst_fx2loop/nexys2/ic3/sys_tst_fx2loop_ic3_n2
- rtl/sys_gen/tst_rlink_cuff/nexys2/ic/sys_tst_rlink_cuff_ic_n2
- tools/bin
- xilinx_sdf_ghdl_filter: tool to patch ISE sdf files for usage with ghdl
- Changes
- documentation
- added a 'system requirements' section in INSTALL.txt
- added INSTALL_ghdl.txt and INSTALL_urjtag.txt covering ghdl and urjtag
- added README_USB-VID-PID.txt
- organizational changes
- added TCLINC,RETRO_FX2_VID,RETRO_FX2_PID environment variables
- functional changes
- tools/bin
- vbomconv - file name substitution handling redone; many vboms updated
- retired modules
- vlib/rlink/tb/
- tbcore_rlink_dcm - obsolete, use tbcore_rlink
- trunk (2011-12-23: svn rev 16(oc) 442(wfjm); untagged w11a_V0.55) +++++++++
- Summary
- added xon/xoff (software flow control) support to serport library
- added test systems for serport verification
- use new serport stack in sys_w11a_* and sys_tst_rlink_* systems
- New features
- new modules
- vlib/serport
- serport_xonrx - xon/xoff logic rx path
- serport_xontx - xon/xoff logic tx path
- serport_1clock - serial port module (uart, fifo, flow control)
- vlib/rlink
- rlink_core8 - rlink core8 with 8bit interface
- rlink_sp1c - rlink_core8 + serport_1clock combo
- new unit tests
- bplib/s3board/tb/tb_s3_sram_memctl (for s3board sram controller
- bplib/nxcramlib/tb/tb_nx_cram_memctl_as (for nexys2,3 cram controller)
- new systems
- sys_gen/tst_serloop/nexys2/sys_tst_serloop1_n2
- sys_gen/tst_serloop/nexys3/sys_tst_serloop1_n3
- sys_gen/tst_serloop/s3board/sys_tst_serloop1_s3
- sys_gen/tst_rlink/s3board/sys_tst_rlink_s3
- Changes
- retired modules
- vlib/rlink
- rlink_rlb2rl - obsolete, now all in rlink_core8
- rlink_base - use now new rlink_core8
- rlink_serport - obsolete, now all in rlink_sp1c
- rlink_base_serport - use now new rlink_sp1c
- trunk (2011-12-04: svn rev 15(oc) 436(wfjm); untagged w11a_V0.54) +++++++++
- Summary
- added support for nexys3 board for w11a
- New features
- new systems
- sys_gen/w11a/nexys3/sys_w11a_n3
- sys_gen/w11a/nexys3/sys_tst_rlink_n3
- Changes
- module renames:
bplib/nexys2/n2_cram_dummy -> bplib/nxcramlib/nx_cram_dummy
bplib/nexys2/n2_cram_memctl_as -> bplib/nxcramlib/nx_cram_memctl_as
- Bug fixes
- tools/src/lib*: backend libraries compile now on 64 bit systems
- trunk (2011-11-20: svn rev 14(oc) 428(wfjm); untagged w11a_V0.532) +++++++++
- Summary
- generalized the 'human I/O' interface for s3board,nexys2/3 and atlys
- added test design for the 'human I/O' interface
- no functional change of w11a CPU core or any existing test systems
- Changes
- functional changes
- use now 'a6' polynomial of Koopman et al for crc8 in rlink
- with one exception all vhdl sources use now numeric_std
- module renames:
vlib/xlib/dcm_sp_sfs_gsim -> vlib/xlib/dcm_sfs_gsim
vlib/xlib/dcm_sp_sfs_unisim -> vlib/xlib/dcm_sfs_unisim_s3e
vlib/xlib/tb/tb_dcm_sp_sfs -> vlib/xlib/tb/tb_dcm_sfs
- New features
- new modules
- rtl/sys_gen/tst_snhumanio
- sub-tree with test design for 'human I/O' interface modules
- atlys, nexys2, and s3board directories contain the systems
for the respective Digilent boards
- trunk (2011-09-11: svn rev 12(oc) 409(wfjm); untagged w11a_V0.531) +++++++++
- Summary
- Many small changes to prepare upcoming support for
- Spartan-6 boards (nexys3 and atlys)
- usage of Cypress FX2 USB interface on nexys2/3 and atlys boards
- no functional change of w11a CPU core or any test systems
- Changes
- use boost libraries instead of custom coding:
- boost/function and /bind for callbacks, retire RmethDscBase and RmethDsc
- boost/foreach for some iterator loops
Note: boost 1.35 and gcc 4.3 or newer is required, see INSTALL.txt
- module renames:
bplib/s3board/s3_rs232_iob_int -> bplib/bpgen/bp_rs232_2line_iob
bplib/s3board/s3_rs232_iob_ext -> bplib/bpgen/bp_rs232_4line_iob
bplib/s3board/s3_dispdrv -> bplib/bpgen/sn_4x7segctl
bplib/s3board/s3_humanio -> bplib/bpgen/sn_humanio
bplib/s3board/s3_humanio_rbus -> bplib/bpgen/sn_humanio_rbus
- other renames:
tools/bin/impact_wrapper -> tools/bin/config_wrapper
- reorganize Makefile includes and xflow option files
rtl/vlib/Makefile.ghdl -> rtl/make/generic_ghdl.mk
rtl/vlib/Makefile.isim -> rtl/make/generic_isim.mk
rtl/vlib/Makefile.xflow -> rtl/make/generic_xflow.mk
rtl/vlib/xst_vhdl.opt -> rtl/make/syn_s3_speed.opt
rtl/vlib/balanced.opt -> rtl/make/imp_s3_speed.opt
- trunk (2011-04-17: svn rev 11(oc) 376(wfjm); untagged w11a_V0.53) ++++++++++
- Summary
- Introduce C++ and Tcl based backend server. A set of C++ classes provide
the basic rlink communication primitives. Additional glue classes provide
a Tcl binding. This first phase contains the basic functionality needed
to control simple test benches.
- add an 'rlink exerciser' (tst_rlink) and a top level design for a Nexys2
board (sys_tst_rlink_n2) and a test suite implemented in Tcl.
- Note: No functional changes in w11a core and I/O system at this point!
The w11a demonstrator systems are still operated with the old
backend code (pi_rri).
- New features
- new directory trees for
- C++ sources of backend (plus make and doxygen documentation support)
- tools/dox - Doxygen documentation configuration
- tools/make - make includes
- tools/src/librlink - basic rlink interface
- tools/src/librlinktpp - C++ to tcl binding for rlink interface
- tools/src/librtools - general support classes and methods
- tools/src/librtcltools - support classes to implement Tcl bindings
- tools/src/librutiltpp - Tcl support commands implemented in C++
- VHDL sources of an 'rlink exerciser'
- rtl/sys_gen/tst_rlink - top level designs for an rlink tester
- rtl/sys_gen/tst_rlink/nexys2 - rlink tester system for Nexsy2 board
- Tcl sources of 'rlink exerciser'
- tools/tcl/rlink - defs and proc's for basic rlink functions
- tools/tcl/rutil - general support procs
- tools/tcl/rbtest - defs and proc's for rbd_tester
- tools/tcl/rbbram - defs and proc's for rbd_bram
- tools/tcl/rbmoni - defs and proc's for rbd_rbmon
- tools/tcl/rbs3hio - defs and proc's for s3_humanio_rbus
- tools/tcl/tst_rlink - defs and proc's for tst_rlink
- new modules
- rtl/vlib/rbus
- rbd_bram - rbus bram test target
- rbd_eyemon - eye monitor for serport's
- rbd_rbmon - rbus monitor
- rbd_tester - rbus tester
- rbd_timer - usec precision timer
- rtl/vlib/memlib
- additional wrappers for distributed and block memories added
- tools/bin
- ti_rri: Tcl driver for rlink tests and servers (will replace pi_rri)
- trunk (2011-01-02: svn rev 9(oc) 352(wfjm); untagged w11a_V0.52) +++++++++++
- Summary
- Introduce rbus protocol V3
- reorganize rbus and rlink modules, many renames
- New features
- vlib/rbus
- added several rbus devices useful for debugging
- rbd_tester: test target, used for example in test benches
- Changes
- module renames:
- the rri (remote-register-interface) components were re-organized and
cleanly separated into rbus and rlink components:
rri/rb_sres_or_* -> rbus/rb_sres_or_*
rri/rri_core -> rlink/rlink_core
rri/rri_base_serport -> rlink/rlink_base_serport
rri/rrilib -> rbus/rblib
-> rlink/rlinklib
rri/rri_serport -> rlink/rlink_serport
rri/tb/rritb_sres_or_mon -> rbus/rb_sres_or_mon
- the rri test bench monitors were reorganized and renamed
rri/tb/rritb_cpmon -> rlink/rlink_mon
rri/tb/rritb_cpmon_sb -> rlink/rlink_mon_sb
rri/tb/rritb_rbmon -> rbus/rb_mon
rri/tb/rritb_rbmon_sb -> rbus/rb_mon_sb
- the rri low level test bench were also renamed
rri/tb/tb_rri -> rlink/tb/tb_rlink
rri/tb/tb_rri_core -> rlink/tb/tb_rlink_direct
rri/tb/tb_rri_serport -> rlink/tb/tb_rlink_serport
- the base modules for rlink+cext based test benches were renamed
rri/tb/rritb_core_cm -> rlink/tb/tbcore_rlink_dcm
rri/tb/rritb_core -> rlink/tb/tbcore_rlink
rri/tb/vhpi_rriext -> rlink/tb/rlink_cext_vhpi
rri/tb/cext_rriext.c -> rlink/tb/rlink_cext.c
- other rri/rbus related renames
bplib/s3board/s3_humanio_rri -> s3_humanio_rbus
w11a/pdp11_core_rri -> pdp11_core_rbus
- other renames
w11a/tb/tb_pdp11_core -> tb_pdp11core
- signal renames:
- rlink interface (defined in rlink/rlinklib.vhd):
- rename rlink port signals:
CP_* -> RL_*
- rename status bit names to better reflect their usage in v3:
ccrc -> cerr - indicates cmd crc error or other cmd level abort
dcrc -> derr - indicates data crc error or other data level abort
ioto -> rbnak - indicates rbus abort, either no ack or timeout
ioerr -> rberr - indicates that rbus err flag was set
- migrate to rbus protocol version 3
- in rb_mreq use now aval,re,we instead of req,we
- basic rbus transaction now takes 2 cycles, one for address select, one
for data exchange. Same concept and reasoning behind as in ibus V2.
- vlib/rlink/rlink_core
- cerr and derr state flags now set on command or data crc errors as well
as on eop/nak aborts when command or wblk data is received.
- has now 'monitor port', RL_MONI.
- RL_FLUSH port removed, the flush logic is now in rlink_serport
- restructured rlink modules
- rlink_core is the rlink protocol engine with a 9 bit wide interface
- rlink_rlb2rl (new) is an adapter to a byte wide interface
- rlink_base (new) combines rlink_core and rlink_rlb2rl
- rlink_serport (re-written) is an adapter to a serial interface
- rlink_base_serport (renamed) combines rlink_base and rlink_serport
- trunk (2010-11-28: svn rev 8(oc) 341(wfjm); untagged w11a_V0.51) +++++++++++
- Summary
- Introduce ibus protocol V2
- Nexys2 systems use DCM
- sys_w11a_n2 now runs with 58 MHz
- New features
- ibus
- added ib_sres_or_mon to check for miss-behaving ibus devices
- added ib_sel to encapsulate address select logic
- nexys2 systems
- now DCM derived system clock supported
- sys_gen/w11a/nexys2
- sys_w11a_n2 now runs with 58 MHz clksys
- Changes
- module renames:
- in future 'box' is used for large autonomous blocks, therefore use
the term unit for purely sequential logic modules:
pdp11_abox -> pdp11_ounit
pdp11_dbox -> pdp11_aunit
pdp11_lbox -> pdp11_lunit
pdp11_mbox -> pdp11_munit
- signal renames:
- renamed RRI_LAM -> RB_LAM in all ibus devices
- renamed CLK -> I_CLK50 in all top level nexys2 and s3board designs
- migrate to ibus protocol version 2
- in ib_mreq use now aval,re,we,rmw instead of req,we,dip
- basic ibus transaction now takes 2 cycles, one for address select, one
for data exchange. This avoids too long logic paths in the ibus logic.
- Bug fixes
- rtl/vlib/Makefile.xflow: use default .opt files under rtl/vlib again.
- w11a_V0.5 (2010-07-23) +++++++++++++++++++++++++++++++++++++++++++++++++++++
Initial release with
- w11a CPU core
- basic set of peripherals: kw11l, dl11, lp11, pc11, rk11/rk05
- just for fun: iist (not fully implemented and tested yet)
- two complete system configurations with
- for a Digilent S3BOARD rtl/sys_gen/w11a/s3board/sys_w11a_s3
- for a Digilent Nexys2 rtl/sys_gen/w11a/nexys2/sys_w11a_n2
Go to most recent revision | Compare with Previous | Blame | View Log