URL
https://opencores.org/ocsvn/w11/w11/trunk
Subversion Repositories w11
[/] [w11/] [tags/] [w11a_V0.61/] [rtl/] [make/] [generic_xflow.mk] - Rev 37
Go to most recent revision | Compare with Previous | Blame | View Log
# $Id: generic_xflow.mk 539 2013-10-13 17:06:35Z mueller $
#
# Revision History:
# Date Rev Version Comment
# 2013-10-12 539 1.9 use xtwi; support trce tsi file; use -C for cpp
# 2013-01-27 477 1.8 remove defaults for ISE_(BOARD|PATH) and XFLOWOPT_*
# use dontincdep.mk to suppress .dep include on clean
# 2013-01-05 470 1.7.6 remove '-r' from all non-dir clean rm's
# 2012-02-05 456 1.7.5 use vbomvonv --get_top for xflow calls
# 2012-01-08 451 1.7.4 use xilinx_ghdl_sdf_filter
# 2012-01-04 450 1.7.3 display isemsg_filter for ncd and bit targets too
# 2011-12-29 446 1.7.2 add fx2load_wrapper in jconfig target
# 2011-08-14 406 1.7.1 use isemsg_filter; new %.mfsum target
# 2011-08-13 405 1.7 renamed, moved to rtl/make;
# 2011-07-17 394 1.6.2 add rm *.svf to ise_clean rule
# 2011-07-11 392 1.6.1 use config_wrapper, support jtag via svf generation
# 2011-06-26 385 1.6 use ISE_PATH for vbomconv -xst_prj
# 2010-11-26 340 1.5.8 fix path for .opt defaults (now rtl/vlib)
# 2010-05-06 289 1.5.7 add xilinx_tsim_xon support
# 2010-04-24 282 1.5.6 add %.impact rule to run impact_wrapper
# 2010-04-17 278 1.4.5 add '|| true' after grep in diag summary to prevent
# a make abort in case no diags are seen
# 2010-04-02 273 1.4.4 add -I{RETROBASE} to ucf_cpp processing rules
# 2010-03-14 268 1.4.3 add XFLOWOPT_SYN and XFLOWOPT_IMP
# 2009-11-21 252 1.4.2 use bitgen directly, use ISE_USERID
# 2007-12-17 102 1.4.1 fix %.dep_ucf_cpp : %.ucf_cpp rule
# 2007-12-16 101 1.4 add ucf_cpp rules
# 2007-12-09 100 1.3.7 ifndef define ISE_PATH to xc3s1000-ft256-4
# 2007-11-02 94 1.3.6 use .SECONDARY to keep intermediate files
# 2007-10-28 93 1.3.5 call xst_count_bels -xsts when _ssim is generated
# 2007-10-12 88 1.3.4 support <design>.xcf files, if provided
# 2007-10-06 87 1.3.3 remove *_twr.log in clean
# 2007-07-20 67 1.3.2 handle local/global xst_vhdl.opt
# 2007-07-15 66 1.3.1 add rule "%.ngc: ../%.vbom" to support _*sim in ./tb
# add XST diagnostics summary at end of listing
# 2007-07-06 64 1.3 all vbom based now
# 2007-06-16 57 1.2.1 cleanup ghdl_clean handling (rm _[sft]sim)
# 2007-06-10 52 1.2 reorganized svn directory structure
# 2007-06-10 51 1.1 consolidate test bench generation
# 2007-06-03 45 1.0 Initial version
#---
#
# setup default board (for impact), device and userid (for bitgen)
#
ifndef ISE_BOARD
$(error ISE_BOARD is not defined)
endif
#
ifndef ISE_PATH
$(error ISE_PATH is not defined)
endif
#
ifndef ISE_USERID
ISE_USERID = 0xffffffff
endif
#
# setup defaults for xflow option files for synthesis and implementation
#
ifndef XFLOWOPT_SYN
$(error XFLOWOPT_SYN is not defined)
endif
#
ifndef XFLOWOPT_IMP
$(error XFLOWOPT_IMP is not defined)
endif
#
XFLOW = xflow -p ${ISE_PATH}
#
# $@ first target
# $< first dependency
# $* stem in rule match
#
# when chaining, don't delete 'expensive' intermediate files:
.SECONDARY :
#
# Synthesize (xst)
# input: %.vbom vbom project description
# output: %.ngc
# %_xst.log xst log file
#
%.ngc: %.vbom
if [ ! -d ./ise ]; then mkdir ./ise; fi
(cd ./ise; vbomconv --ise_path=${ISE_PATH} --xst_prj ../$< > $*.prj)
(cd ./ise; touch $*.xcf)
if [ -r $*.xcf ]; then cp $*.xcf ./ise; fi
if [ -r ${RETROBASE}/rtl/make/${XFLOWOPT_SYN} ]; then \
cp ${RETROBASE}/rtl/make/${XFLOWOPT_SYN} ./ise; fi
if [ -r ${XFLOWOPT_SYN} ]; then cp ${XFLOWOPT_SYN} ./ise; fi
xtwi ${XFLOW} -wd ise -synth ${XFLOWOPT_SYN} \
-g top_entity:`vbomconv --get_top $<` $*.prj
(cd ./ise; chmod -x *.* )
if [ -r ./ise/$*.ngc ]; then cp -p ./ise/$*.ngc .; fi
if [ -r ./ise/$*_xst.log ]; then cp -p ./ise/$*_xst.log .; fi
@ echo "==============================================================="
@ echo "* XST Diagnostic Summary *"
@ echo "==============================================================="
@ if [ -r $*.mfset ]; then isemsg_filter xst $*.mfset $*_xst.log; fi
@ if [ ! -r $*.mfset ]; then grep -i -A 1 ":.*:" $*_xst.log || true; fi
@ echo "==============================================================="
#
# the following rule needed to generate an %_*sim.vhd in a ./tb sub-directory
# it will look for a matching vbom in the parent directory
%.ngc: ../%.vbom
if [ ! -d ./ise ]; then mkdir ./ise; fi
(cd ./ise; vbomconv --xst_prj ../$< > $*.prj)
(cd ./ise; touch $*.xcf)
if [ -r $*.xcf ]; then cp $*.xcf ./ise; fi
if [ -r ${RETROBASE}/rtl/make/${XFLOWOPT_SYN} ]; then \
cp ${RETROBASE}/rtl/make/${XFLOWOPT_SYN} ./ise; fi
if [ -r ${XFLOWOPT_SYN} ]; then cp ${XFLOWOPT_SYN} ./ise; fi
xtwi ${XFLOW} -wd ise -synth ${XFLOWOPT_SYN} \
-g top_entity:`vbomconv --get_top $<` $*.prj
(cd ./ise; chmod -x *.* )
if [ -r ./ise/$*.ngc ]; then cp -p ./ise/$*.ngc .; fi
if [ -r ./ise/$*_xst.log ]; then cp -p ./ise/$*_xst.log .; fi
@ echo "==============================================================="
@ echo "* XST Diagnostic Summary *"
@ echo "==============================================================="
@ if [ -r $*.mfset ]; then isemsg_filter xst $*.mfset $*_xst.log; fi
@ if [ ! -r $*.mfset ]; then grep -i -A 1 ":.*:" $*_xst.log || true; fi
@ echo "==============================================================="
#
# Implement 1 (map+par)
# input: %.ngc
# %.ucf constraint file (if available)
# output: %.ncd
# %.pcf
# %_tra.log translate (ngdbuild) log file (renamed %.bld)
# %_map.log map log file (renamed %_map.mrp)
# %_par.log par log file (renamed %.par)
# %_pad.log pad file (renamed %_pad.txt)
# %_tsi.log trce tsi file (renamed %.tsi)
# %_twr.log trce log file (renamed %.twr)
#
%.ncd %.pcf: %.ngc
if [ ! -d ./ise ]; then mkdir ./ise; fi
if [ -r $*.ngc ]; then cp -p $*.ngc ./ise; fi
if [ -r $*.ucf ]; then cp -p $*.ucf ./ise; fi
if [ -r ${RETROBASE}/rtl/make/${XFLOWOPT_IMP} ]; then \
cp ${RETROBASE}/rtl/make/${XFLOWOPT_IMP} ./ise; fi
if [ -r ${XFLOWOPT_IMP} ]; then cp -p ${XFLOWOPT_IMP} ./ise; fi
xtwi ${XFLOW} -wd ise -implement ${XFLOWOPT_IMP} $<
(cd ./ise; chmod -x *.* )
if [ -r ./ise/$*.ncd ]; then cp -p ./ise/$*.ncd .; fi
if [ -r ./ise/$*.pcf ]; then cp -p ./ise/$*.pcf .; fi
if [ -r ./ise/$*.bld ]; then cp -p ./ise/$*.bld ./$*_tra.log; fi
if [ -r ./ise/$*_map.mrp ]; then cp -p ./ise/$*_map.mrp ./$*_map.log; fi
if [ -r ./ise/$*.par ]; then cp -p ./ise/$*.par ./$*_par.log; fi
if [ -r ./ise/$*_pad.txt ]; then cp -p ./ise/$*_pad.txt ./$*_pad.log; fi
if [ -r ./ise/$*.twr ]; then cp -p ./ise/$*.twr ./$*_twr.log; fi
if [ -r ./ise/$*.tsi ]; then cp -p ./ise/$*.tsi ./$*_tsi.log; fi
@ if [ -r $*.mfset ]; then \
echo "=============================================================";\
echo "* Translate Diagnostic Summary *";\
echo "=============================================================";\
isemsg_filter tra $*.mfset $*_tra.log;\
echo "=============================================================";\
echo "* MAP Diagnostic Summary *";\
echo "=============================================================";\
isemsg_filter map $*.mfset $*_map.log;\
echo "=============================================================";\
echo "* PAR Diagnostic Summary *";\
echo "=============================================================";\
isemsg_filter par $*.mfset $*_par.log;\
echo "=============================================================";\
fi
#
# Implement 2 (bitgen)
# input: %.ncd
# output: %.bit
# %.msk
# %_bgn.log bitgen log file (renamed %.bgn)
#
%.bit: %.ncd
if [ ! -d ./ise ]; then mkdir ./ise; fi
if [ -r $*.ncd ]; then cp -p $*.ncd ./ise; fi
(cd ./ise; xtwi bitgen -l -w -m -g ReadBack -g UserId:${ISE_USERID} -intstyle xflow $*.ncd)
(cd ./ise; chmod -x *.* )
if [ -r ./ise/$*.bit ]; then cp -p ./ise/$*.bit .; fi
if [ -r ./ise/$*.msk ]; then cp -p ./ise/$*.msk .; fi
if [ -r ./ise/$*.bgn ]; then cp -p ./ise/$*.bgn ./$*_bgn.log; fi
@ if [ -r $*.mfset ]; then \
echo "=============================================================";\
echo "* Bitgen Diagnostic Summary *";\
echo "=============================================================";\
isemsg_filter bgn $*.mfset $*_bgn.log;\
echo "=============================================================";\
fi
#
# Create svf from bitstream
# input: %.bit
# output: %.svf
#
%.svf: %.bit
xtwi config_wrapper --board=${ISE_BOARD} --path=${ISE_PATH} bit2svf $*.bit
#
# Configure FPGA with impact
# input: %.bit
# output: .PHONY
#
%.iconfig: %.bit
xtwi config_wrapper --board=${ISE_BOARD} --path=${ISE_PATH} iconfig $*.bit
#
# Configure FPGA with jtag
# input: %.svf
# output: .PHONY
#
ifneq "$(origin FX2_FILE)" "undefined"
FX2LOAD_OPT = --file=${FX2_FILE}
endif
#
%.jconfig: %.svf
fx2load_wrapper --board=${ISE_BOARD} ${FX2LOAD_OPT}
xtwi config_wrapper --board=${ISE_BOARD} --path=${ISE_PATH} jconfig $*.svf
#
# Print log file summary
# input: %_*.log (not depended)
# output: .PHONY
%.mfsum: %.mfset
@ echo "=== XST summary ============================================="
@ if [ -r $*_xst.log ]; then isemsg_filter xst $*.mfset $*_xst.log; fi
@ echo "=== Translate summary ======================================="
@ if [ -r $*_tra.log ]; then isemsg_filter tra $*.mfset $*_tra.log; fi
@ echo "=== MAP summary ============================================="
@ if [ -r $*_map.log ]; then isemsg_filter map $*.mfset $*_map.log; fi
@ echo "=== PAR summary ============================================="
@ if [ -r $*_par.log ]; then isemsg_filter par $*.mfset $*_par.log; fi
@ echo "=== Bitgen summary =========================================="
@ if [ -r $*_bgn.log ]; then isemsg_filter bgn $*.mfset $*_bgn.log; fi
#
#
#
# Post-XST simulation model (netgen -sim; UNISIM based)
# input: %.ngc
# output: %_ssim.vhd
# %_ngn_ssim.log netgen log file (renamed %.nlf)
#
%_ssim.vhd: %.ngc
if [ ! -d ./ise ]; then mkdir ./ise; fi
if [ -r $*.ngc ]; then cp -p $*.ngc ./ise; fi
(cd ise; xtwi netgen -sim -intstyle xflow -ofmt vhdl -w $*.ngc)
(cd ./ise; chmod -x *.* )
if [ -r ./ise/$*.vhd ]; then cp -p ./ise/$*.vhd ./$*_ssim.vhd; fi
if [ -r ./ise/$*.nlf ]; then cp -p ./ise/$*.nlf ./$*_ngn_ssim.log; fi
if [ -r $*_ssim.vhd ]; then xst_count_bels -xsts $*_ssim.vhd; fi
#
# Post-XST simulation model (netgen -sim; SIMPRIM based)
# input: %.ngc
# output: %_fsim.vhd
# %_ngn_fsim.log netgen log file (renamed %.nlf)
#
%_fsim.vhd: %.ngc
if [ ! -d ./ise ]; then mkdir ./ise; fi
if [ -r $*.ngc ]; then cp -p $*.ngc ./ise; fi
(cd ise; xtwi ngdbuild -p ${ISE_PATH} -nt timestamp -intstyle xflow \
$*.ngc $*.ngd)
(cd ise; netgen -sim -intstyle xflow -ofmt vhdl -w $*.ngd)
(cd ./ise; chmod -x *.* )
if [ -r ./ise/$*.vhd ]; then cp -p ./ise/$*.vhd ./$*_fsim.vhd; fi
if [ -r ./ise/$*.nlf ]; then cp -p ./ise/$*.nlf ./$*_ngn_fsim.log; fi
#
# Post-par timing simulation model (netgen -sim)
# input: %.ncd
# %.tsim_xon_dat xon disable descriptor file (optional)
# output: %_tsim.vhd
# %_ngn_tsim.log netgen log file (renamed time_sim.nlf)
# %_tsim.sdf delay annotation
# %_tsim.sdf_ghdl delay annotation with ghdl patches
#
#!! use netgen directly because xflow 8.1 goes mad when -tsim used a 2nd time
#!! see blog_xilinx_webpack.txt 2007-06-10
#
%_tsim.vhd %_tsim.sdf: %.ncd
if [ ! -d ./ise ]; then mkdir ./ise; fi
if [ -r $*.ncd ]; then cp -p $*.ncd ./ise; fi
if [ -r $*.pcf ]; then cp -p $*.pcf ./ise; fi
(cd ise; xtwi netgen -ofmt vhdl -sim -w -intstyle xflow -pcf \
$*.pcf $*.ncd $*_tsim.vhd )
(cd ./ise; chmod -x *.* )
if [ -r ./ise/$*_tsim.vhd ]; then cp -p ./ise/$*_tsim.vhd .; fi
if [ -r ./ise/$*_tsim.sdf ]; then cp -p ./ise/$*_tsim.sdf .; fi
if [ -r ./ise/$*_tsim.nlf ]; then cp -p ./ise/$*_tsim.nlf ./$*_ngn_tsim.log; fi
if [ -r $*_tsim.vhd -a -r $*.tsim_xon_dat ]; then xilinx_tsim_xon $*; fi
if [ -r $*_tsim.sdf ]; then xilinx_ghdl_sdf_filter $*_tsim.sdf > $*_tsim.sdf_ghdl ; fi
#
# generate dep_xst files from vbom
#
%.dep_xst: %.vbom
vbomconv --dep_xst $< > $@
#
# generate cpp'ed ucf files from ucf_cpp
#
%.ucf : %.ucf_cpp
cpp -C -I${RETROBASE}/rtl $*.ucf_cpp $*.ucf
#
# generate nested dependency rules for cpp'ed ucf files from ucf_cpp
#
%.dep_ucf_cpp : %.ucf_cpp
cpp -C -I${RETROBASE}/rtl -MM $*.ucf_cpp |\
sed 's/\.o:/\.ucf:/' > $*.dep_ucf_cpp
#
include $(RETROBASE)/rtl/make/dontincdep.mk
#
.PHONY : ise_clean ise_tmp_clean
#
ise_clean: ise_tmp_clean
rm -f *.ngc
rm -f *.ncd
rm -f *.pcf
rm -f *.bit
rm -f *.msk
rm -f *.svf
rm -f *_[sft]sim.vhd
rm -f *_tsim.sdf
rm -f *_tsim.sdf_ghdl
rm -f *_xst.log
rm -f *_tra.log
rm -f *_map.log
rm -f *_par.log
rm -f *_pad.log
rm -f *_twr.log
rm -f *_tsi.log
rm -f *_bgn.log
rm -f *_ngn_[sft]sim.log
rm -f *_svn.log
rm -f *_sum.log
#
ise_tmp_clean:
rm -rf ./ise
#
Go to most recent revision | Compare with Previous | Blame | View Log