URL
https://opencores.org/ocsvn/w11/w11/trunk
Subversion Repositories w11
[/] [w11/] [tags/] [w11a_V0.61/] [rtl/] [make/] [imp_s6_speed.opt] - Rev 37
Go to most recent revision | Compare with Previous | Blame | View Log
FLOWTYPE = FPGA;
#
# $Id: imp_s6_speed.opt 539 2013-10-13 17:06:35Z mueller $
#
# Revision History:
# Date Rev Version Comment
# 2013-10-11 539 1.2.1 use -fastpaths, -u, -tsi for trce
# 2013-10-02 537 1.2 for ISE 14.x: for map drop -global_opt and -logic_opt
# use only -register_duplication; use -detail
# 2012-01-03 449 1.1 use '-mt 2' in map and par
# 2011-08-13 405 1.0 Initial version
#
# Derived from ISE balanced.opt
# Uses uses settings like 'mapgloboptlogoptregdup' SmartExplorer strategy
#
# ----------------------------------------------------------------------------
# Options for Translator
#
# Type "ngdbuild -h" for a detailed list of ngdbuild command line options
#
Program ngdbuild
-p <partname>; # Partname to use - picked from xflow commandline
-nt timestamp; # NGO File generation. Regenerate only when
# source netlist is newer than existing
# NGO file (default)
-intstyle xflow; # Message Reporting Style: ise, xflow, or silent
<userdesign>; # User design - pick from xflow command line
<design>.ngd; # Name of NGD file. Filebase same as design filebase
End Program ngdbuild
#
# ----------------------------------------------------------------------------
# Options for Mapper
#
# Type "map -h <arch>" for a detailed list of map command line options
#
Program map
-o <design>_map.ncd; # Output Mapped ncd file
-intstyle xflow; # Message Reporting Style: ise, xflow, or silent
-ol high; # Effort level
-xe n; # Extra effort level for timing-driven packing (normal)
-register_duplication on;# Duplicate registers/luts during timing-driven packing
-w; # Always overwrite any existing output files
-mt 2; # Multi-threading
-detail; # detailed map report
<inputdir><design>.ngd; # Input NGD file
<inputdir><design>.pcf; # Physical constraints file
END Program map
#
# ----------------------------------------------------------------------------
# Options for Post Map Trace
#
# Type "trce -h" for a detailed list of trce command line options
#
Program post_map_trce
-v 3; # Produce verbose timing report
#-e 3; # Produce error report (limit 3 items/constraint)
-xml <design>_map.twx; # Output XML version of the timing report
-intstyle xflow; # Message Reporting Style: ise, xflow, or silent
<inputdir><design>_map.ncd; # Input mapped ncd
<inputdir><design>.pcf; # Physical constraints file
END Program post_map_trce
#
# ----------------------------------------------------------------------------
# Options for Place and Route
#
# Type "par -h" for a detailed list of par command line options
#
Program par
-w; # Overwrite existing placed and routed ncd
-ol high; # Overall effort level
-xe n; # extra effort level
-intstyle xflow; # Message Reporting Style: ise, xflow, or silent
-mt 2; # Multi-threading
<design>_map.ncd; # Input mapped NCD file
<inputdir><design>.ncd; # Output placed and routed NCD
<inputdir><design>.pcf; # Input physical constraints file
END Program par
#
# ----------------------------------------------------------------------------
# Options for Post Par Trace
#
# Type "trce -h" for a detailed list of trce command line options
#
Program post_par_trce
-v 3; # Produce verbose timing report
-fastpaths; # report fastest paths/verbose hold paths
-u 100; # report unconstrained paths
-intstyle xflow; # Message Reporting Style: ise, xflow, or silent
-xml <design>.twx; # Output XML version of the timing report
-tsi <design>.tsi; # produce timing specification interaction report
<inputdir><design>.ncd; # Input placed and routed ncd
<inputdir><design>.pcf; # Physical constraints file
END Program post_par_trce
Go to most recent revision | Compare with Previous | Blame | View Log