URL
https://opencores.org/ocsvn/w11/w11/trunk
Subversion Repositories w11
[/] [w11/] [tags/] [w11a_V0.61/] [rtl/] [vlib/] [comlib/] [byte2cdata.vhd] - Rev 36
Go to most recent revision | Compare with Previous | Blame | View Log
-- $Id: byte2cdata.vhd 427 2011-11-19 21:04:11Z mueller $ -- -- Copyright 2007-2011 by Walter F.J. Mueller <W.F.J.Mueller@gsi.de> -- -- This program is free software; you may redistribute and/or modify it under -- the terms of the GNU General Public License as published by the Free -- Software Foundation, either version 2, or at your option any later version. -- -- This program is distributed in the hope that it will be useful, but -- WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- for complete details. -- ------------------------------------------------------------------------------ -- Module Name: byte2cdata - syn -- Description: Byte stream to 9 bit comma,data converter -- -- Dependencies: - -- Test bench: - -- Target Devices: generic -- Tool versions: xst 8.2, 9.1, 9.2, 12.1, 13.1; ghdl 0.18-0.29 -- -- Revision History: -- Date Rev Version Comment -- 2011-11-19 427 1.0.2 now numeric_std clean -- 2007-10-12 88 1.0.1 avoid ieee.std_logic_unsigned, use cast to unsigned -- 2007-08-27 76 1.0 Initial version ------------------------------------------------------------------------------ library ieee; use ieee.std_logic_1164.all; use ieee.numeric_std.all; use work.slvtypes.all; entity byte2cdata is -- byte stream -> 9bit comma,data generic ( CPREF : slv4 := "1000"; -- comma prefix NCOMM : positive := 4); -- number of comma chars port ( CLK : in slbit; -- clock RESET : in slbit; -- reset DI : in slv8; -- input data ENA : in slbit; -- write enable BUSY : out slbit; -- write port hold DO : out slv9; -- output data; bit 8 = comma flag VAL : out slbit; -- read valid HOLD : in slbit -- read hold ); end byte2cdata; architecture syn of byte2cdata is type state_type is ( s_idle, s_data, s_escape ); type regs_type is record data : slv9; -- current data state : state_type; -- state end record regs_type; constant regs_init : regs_type := ( (others=>'0'), s_idle ); signal R_REGS : regs_type := regs_init; -- state registers signal N_REGS : regs_type := regs_init; -- next value state regs begin assert NCOMM <= 14 report "assert(NCOMM <= 14)" severity FAILURE; proc_regs: process (CLK) begin if rising_edge(CLK) then if RESET = '1' then R_REGS <= regs_init; else R_REGS <= N_REGS; end if; end if; end process proc_regs; proc_next: process (R_REGS, DI, ENA, HOLD) variable r : regs_type := regs_init; variable n : regs_type := regs_init; variable ival : slbit := '0'; variable ibusy : slbit := '0'; begin r := R_REGS; n := R_REGS; ival := '0'; ibusy := '1'; case r.state is when s_idle => ibusy := '0'; if ENA = '1' then n.data := "0" & DI; n.state := s_data; if DI(7 downto 4) = CPREF then if DI(3 downto 0) = "1111" then n.state := s_escape; elsif unsigned(DI(3 downto 0)) <= NCOMM then n.data := "10000" & DI(3 downto 0); n.state := s_data; end if; end if; end if; when s_data => ival := '1'; if HOLD = '0' then n.state := s_idle; end if; when s_escape => ibusy := '0'; if ENA = '1' then n.data := "0" & CPREF & DI(3 downto 0); n.state := s_data; end if; when others => null; end case; N_REGS <= n; DO <= r.data; VAL <= ival; BUSY <= ibusy; end process proc_next; end syn;
Go to most recent revision | Compare with Previous | Blame | View Log