URL
https://opencores.org/ocsvn/w11/w11/trunk
Subversion Repositories w11
[/] [w11/] [tags/] [w11a_V0.61/] [rtl/] [vlib/] [rbus/] [rbdlib.vhd] - Rev 36
Go to most recent revision | Compare with Previous | Blame | View Log
-- $Id: rbdlib.vhd 427 2011-11-19 21:04:11Z mueller $ -- -- Copyright 2010-2011 by Walter F.J. Mueller <W.F.J.Mueller@gsi.de> -- -- This program is free software; you may redistribute and/or modify it under -- the terms of the GNU General Public License as published by the Free -- Software Foundation, either version 2, or at your option any later version. -- -- This program is distributed in the hope that it will be useful, but -- WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- for complete details. -- ------------------------------------------------------------------------------ -- Package Name: rbdlib -- Description: Definitions for rbus devices -- -- Dependencies: - -- Tool versions: xst 12.1, 13.1; ghdl 0.29 -- -- Revision History: -- Date Rev Version Comment -- 2011-11-19 427 1.2.1 now numeric_std clean -- 2010-12-29 351 1.2 new address layout; add rbd_timer -- 2010-12-27 349 1.1 now correct defs for _rbmon and _eyemon -- 2010-12-04 343 1.0 Initial version ------------------------------------------------------------------------------ -- -- base addresses of some standard rbus devices -- -- rbd_rbmon 111111xx -++-- these three used as monitors -- rbd_eyemon 111110xx / -- rbd_rlstat 1111011x / -- rbd_bram 1111010x \ -- rbd_tester 111100xx +- all five used in test benchs -- library ieee; use ieee.std_logic_1164.all; use ieee.numeric_std.all; use work.slvtypes.all; use work.rblib.all; package rbdlib is -- ise 13.1 xst can bug check if generic defaults in a package are defined via -- 'slv(to_unsigned())'. The conv_ construct prior to numeric_std was ok. -- As workaround the ibus default addresses are defined here as constant. constant rbaddr_tester : slv8 := slv(to_unsigned(2#11110000#,8)); constant rbaddr_bram : slv8 := slv(to_unsigned(2#11110100#,8)); constant rbaddr_rbmon : slv8 := slv(to_unsigned(2#11111100#,8)); constant rbaddr_eyemon : slv8 := slv(to_unsigned(2#11111000#,8)); constant rbaddr_timer : slv8 := slv(to_unsigned(2#00000000#,8)); component rbd_tester is -- rbus dev: rbus tester -- complete rbus_aif interface generic ( RB_ADDR : slv8 := rbaddr_tester); port ( CLK : in slbit; -- clock RESET : in slbit; -- reset RB_MREQ : in rb_mreq_type; -- rbus: request RB_SRES : out rb_sres_type; -- rbus: response RB_LAM : out slv16; -- rbus: look at me RB_STAT : out slv3 -- rbus: status flags ); end component; component rbd_bram is -- rbus dev: bram test target -- incomplete rbus_aif interface generic ( RB_ADDR : slv8 := rbaddr_bram); port ( CLK : in slbit; -- clock RESET : in slbit; -- reset RB_MREQ : in rb_mreq_type; -- rbus: request RB_SRES : out rb_sres_type -- rbus: response ); end component; component rbd_rbmon is -- rbus dev: rbus monitor generic ( RB_ADDR : slv8 := rbaddr_rbmon; AWIDTH : positive := 9); port ( CLK : in slbit; -- clock RESET : in slbit; -- reset RB_MREQ : in rb_mreq_type; -- rbus: request RB_SRES : out rb_sres_type; -- rbus: response RB_SRES_SUM : in rb_sres_type -- rbus: response (sum for monitor) ); end component; component rbd_eyemon is -- rbus dev: eye monitor for serport's generic ( RB_ADDR : slv8 := rbaddr_eyemon; RDIV : slv8 := (others=>'0')); port ( CLK : in slbit; -- clock RESET : in slbit; -- reset RB_MREQ : in rb_mreq_type; -- rbus: request RB_SRES : out rb_sres_type; -- rbus: response RXSD : in slbit; -- rx: serial data RXACT : in slbit -- rx: active (start seen) ); end component; component rbd_timer is -- rbus dev: usec precision timer generic ( RB_ADDR : slv8 := rbaddr_timer); port ( CLK : in slbit; -- clock CE_USEC : in slbit; -- usec pulse RESET : in slbit; -- reset RB_MREQ : in rb_mreq_type; -- rbus: request RB_SRES : out rb_sres_type; -- rbus: response DONE : out slbit; -- mark last timer cycle BUSY : out slbit -- timer running ); end component; end package rbdlib;
Go to most recent revision | Compare with Previous | Blame | View Log