URL
https://opencores.org/ocsvn/w11/w11/trunk
Subversion Repositories w11
[/] [w11/] [tags/] [w11a_V0.61/] [rtl/] [vlib/] [rlink/] [tb/] [tbd_rlink_sp1c.vhd] - Rev 17
Go to most recent revision | Compare with Previous | Blame | View Log
-- $Id: tbd_rlink_sp1c.vhd 444 2011-12-25 10:04:58Z mueller $ -- -- Copyright 2007-2011 by Walter F.J. Mueller <W.F.J.Mueller@gsi.de> -- -- This program is free software; you may redistribute and/or modify it under -- the terms of the GNU General Public License as published by the Free -- Software Foundation, either version 2, or at your option any later version. -- -- This program is distributed in the hope that it will be useful, but -- WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- for complete details. -- ------------------------------------------------------------------------------ -- Module Name: tbd_rlink_sp1c - syn -- Description: Wrapper for rlink_core plus rlink_serport with an interface -- compatible to the rlink_core only module. -- NOTE: this implementation is a hack, should be redone -- using configurations. -- -- Dependencies: tbu_rlink_sp1c [UUT] -- serport_uart_tx -- serport_uart_rx -- byte2cdata -- cdata2byte -- simlib/simclkcnt -- -- To test: rlink_sp1c -- -- Target Devices: generic -- Tool versions: xst 8.2, 9.1, 9.2, 12.1, 13.1; ghdl 0.18-0.29 -- -- Revision History: -- Date Rev Version Comment -- 2011-12-23 444 3.2 use simclkcnt instead of simbus global -- 2011-12-22 442 3.1 renamed and retargeted to tbu_rlink_sp1c -- 2011-11-19 427 3.0.5 now numeric_std clean -- 2010-12-28 350 3.0.4 use CLKDIV/CDINIT=0; -- 2010-12-26 348 3.0.3 add RTS/CTS ports for tbu_; -- 2010-12-24 347 3.0.2 rename: CP_*->RL->* -- 2010-12-22 346 3.0.1 removed proc_moni, use .rlmon cmd in test bench -- 2010-12-05 343 3.0 rri->rlink renames; port to rbus V3 protocol; -- 2010-06-06 301 2.3 use NCOMM=4 (new eop,nak commas) -- 2010-05-02 287 2.2.2 ren CE_XSEC->CE_INT,RP_STAT->RB_STAT,AP_LAM->RB_LAM -- drop RP_IINT signal from interfaces -- 2010-04-24 281 2.2.1 use serport_uart_[tr]x directly again -- 2010-04-03 274 2.2 add CE_USEC -- 2009-03-14 197 2.1 remove records in interface to allow _ssim usage -- 2008-08-24 162 2.0 with new rb_mreq/rb_sres interface -- 2007-11-25 98 1.1 added RP_IINT support; use entity rather arch -- name to switch core/serport; -- use serport_uart_[tr]x_tb to allow that UUT is a -- [sft]sim model compiled with keep hierarchy -- 2007-07-02 63 1.0 Initial version ------------------------------------------------------------------------------ library ieee; use ieee.std_logic_1164.all; use ieee.numeric_std.all; use ieee.std_logic_textio.all; use std.textio.all; use work.slvtypes.all; use work.rlinklib.all; use work.comlib.all; use work.serport.all; use work.simlib.all; use work.simbus.all; entity tbd_rlink_sp1c is -- rlink_sp1c tb design -- implements tbd_rlink_gen port ( CLK : in slbit; -- clock CE_INT : in slbit; -- rlink ito time unit clock enable CE_USEC : in slbit; -- 1 usec clock enable RESET : in slbit; -- reset RL_DI : in slv9; -- rlink: data in RL_ENA : in slbit; -- rlink: data enable RL_BUSY : out slbit; -- rlink: data busy RL_DO : out slv9; -- rlink: data out RL_VAL : out slbit; -- rlink: data valid RL_HOLD : in slbit; -- rlink: data hold RB_MREQ_aval : out slbit; -- rbus: request - aval RB_MREQ_re : out slbit; -- rbus: request - re RB_MREQ_we : out slbit; -- rbus: request - we RB_MREQ_initt : out slbit; -- rbus: request - init; avoid name coll RB_MREQ_addr : out slv8; -- rbus: request - addr RB_MREQ_din : out slv16; -- rbus: request - din RB_SRES_ack : in slbit; -- rbus: response - ack RB_SRES_busy : in slbit; -- rbus: response - busy RB_SRES_err : in slbit; -- rbus: response - err RB_SRES_dout : in slv16; -- rbus: response - dout RB_LAM : in slv16; -- rbus: look at me RB_STAT : in slv3; -- rbus: status flags TXRXACT : out slbit -- txrx active flag ); end entity tbd_rlink_sp1c; architecture syn of tbd_rlink_sp1c is constant CDWIDTH : positive := 13; constant c_cdinit : natural := 0; -- NOTE: change in tbu_rlink_sp1c !! signal RRI_RXSD : slbit := '0'; signal RRI_TXSD : slbit := '0'; signal RTS_N : slbit := '0'; signal RXDATA : slv8 := (others=>'0'); signal RXVAL : slbit := '0'; signal RXACT : slbit := '0'; signal TXDATA : slv8 := (others=>'0'); signal TXENA : slbit := '0'; signal TXBUSY : slbit := '0'; signal CLKDIV : slv13 := slv(to_unsigned(c_cdinit,CDWIDTH)); signal CLK_CYCLE : integer := 0; component tbu_rlink_sp1c is -- rlink core+serport combo port ( CLK : in slbit; -- clock CE_INT : in slbit; -- rlink ito time unit clock enable CE_USEC : in slbit; -- 1 usec clock enable CE_MSEC : in slbit; -- 1 msec clock enable RESET : in slbit; -- reset RXSD : in slbit; -- receive serial data (board view) TXSD : out slbit; -- transmit serial data (board view) CTS_N : in slbit; -- clear to send (act.low, board view) RTS_N : out slbit; -- request to send (act.low, board view) RB_MREQ_aval : out slbit; -- rbus: request - aval RB_MREQ_re : out slbit; -- rbus: request - re RB_MREQ_we : out slbit; -- rbus: request - we RB_MREQ_initt : out slbit; -- rbus: request - init; avoid name coll RB_MREQ_addr : out slv8; -- rbus: request - addr RB_MREQ_din : out slv16; -- rbus: request - din RB_SRES_ack : in slbit; -- rbus: response - ack RB_SRES_busy : in slbit; -- rbus: response - busy RB_SRES_err : in slbit; -- rbus: response - err RB_SRES_dout : in slv16; -- rbus: response - dout RB_LAM : in slv16; -- rbus: look at me RB_STAT : in slv3 -- rbus: status flags ); end component; begin UUT : tbu_rlink_sp1c port map ( CLK => CLK, CE_INT => CE_INT, CE_USEC => CE_USEC, CE_MSEC => '1', RESET => RESET, RXSD => RRI_RXSD, TXSD => RRI_TXSD, CTS_N => '0', RTS_N => RTS_N, RB_MREQ_aval => RB_MREQ_aval, RB_MREQ_re => RB_MREQ_re, RB_MREQ_we => RB_MREQ_we, RB_MREQ_initt=> RB_MREQ_initt, RB_MREQ_addr => RB_MREQ_addr, RB_MREQ_din => RB_MREQ_din, RB_SRES_ack => RB_SRES_ack, RB_SRES_busy => RB_SRES_busy, RB_SRES_err => RB_SRES_err, RB_SRES_dout => RB_SRES_dout, RB_LAM => RB_LAM, RB_STAT => RB_STAT ); UARTRX : serport_uart_rx generic map ( CDWIDTH => CDWIDTH) port map ( CLK => CLK, RESET => RESET, CLKDIV => CLKDIV, RXSD => RRI_TXSD, RXDATA => RXDATA, RXVAL => RXVAL, RXERR => open, RXACT => RXACT ); UARTTX : serport_uart_tx generic map ( CDWIDTH => CDWIDTH) port map ( CLK => CLK, RESET => RESET, CLKDIV => CLKDIV, TXSD => RRI_RXSD, TXDATA => TXDATA, TXENA => TXENA, TXBUSY => TXBUSY ); TXRXACT <= RXACT or TXBUSY; B2CD : byte2cdata -- byte stream -> 9bit comma,data generic map ( CPREF => c_rlink_cpref, NCOMM => c_rlink_ncomm) port map ( CLK => CLK, RESET => RESET, DI => RXDATA, ENA => RXVAL, BUSY => open, DO => RL_DO, VAL => RL_VAL, HOLD => RL_HOLD ); CD2B : cdata2byte -- 9bit comma,data -> byte stream generic map ( CPREF => c_rlink_cpref, NCOMM => c_rlink_ncomm) port map ( CLK => CLK, RESET => RESET, DI => RL_DI, ENA => RL_ENA, BUSY => RL_BUSY, DO => TXDATA, VAL => TXENA, HOLD => TXBUSY ); CLKCNT : simclkcnt port map (CLK => CLK, CLK_CYCLE => CLK_CYCLE); proc_moni: process variable oline : line; variable rts_last : slbit := '0'; variable ncycle : integer := 0; begin loop wait until rising_edge(CLK); -- check at end of clock cycle if RTS_N /= rts_last then writetimestamp(oline, CLK_CYCLE, ": rts "); write(oline, string'(" RTS_N ")); write(oline, rts_last, right, 1); write(oline, string'(" -> ")); write(oline, RTS_N, right, 1); write(oline, string'(" after ")); write(oline, ncycle, right, 5); write(oline, string'(" cycles")); writeline(output, oline); rts_last := RTS_N; ncycle := 0; end if; ncycle := ncycle + 1; end loop; end process proc_moni; end syn;
Go to most recent revision | Compare with Previous | Blame | View Log