URL
https://opencores.org/ocsvn/w11/w11/trunk
Subversion Repositories w11
[/] [w11/] [tags/] [w11a_V0.61/] [rtl/] [w11a/] [pdp11_core_rbus.vhd] - Rev 37
Go to most recent revision | Compare with Previous | Blame | View Log
-- $Id: pdp11_core_rbus.vhd 553 2014-03-17 06:40:08Z mueller $ -- -- Copyright 2007-2014 by Walter F.J. Mueller <W.F.J.Mueller@gsi.de> -- -- This program is free software; you may redistribute and/or modify it under -- the terms of the GNU General Public License as published by the Free -- Software Foundation, either version 2, or at your option any later version. -- -- This program is distributed in the hope that it will be useful, but -- WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- for complete details. -- ------------------------------------------------------------------------------ -- Module Name: pdp11_core_rbus - syn -- Description: pdp11: core to rbus interface -- -- Dependencies: - -- Test bench: tb/tb_rlink_tba_pdp11core -- -- Target Devices: generic -- Tool versions: xst 8.2, 9.1, 9.2, 11.4, 12.1, 13.1; ghdl 0.18-0.29 -- Revision History: - -- Date Rev Version Comment -- 2011-11-18 427 1.1.1 now numeric_std clean -- 2010-12-29 351 1.1 renamed from pdp11_core_rri; ported to rbv3 -- 2010-10-23 335 1.2.3 rename RRI_LAM->RB_LAM; -- 2010-06-20 308 1.2.2 use c_ibrb_ibf_ def's -- 2010-06-18 306 1.2.1 rename RB_ADDR->RB_ADDR_CORE, add RB_ADDR_IBUS; -- add ibrb register and ibr window logic -- 2010-06-13 305 1.2 add CP_ADDR in port; mostly rewritten for new -- rri <-> cp mapping -- 2010-06-03 299 1.1.2 correct rbus init logic (use we, din, RB_ADDR) -- 2010-05-02 287 1.1.1 rename RP_STAT->RB_STAT; remove unneeded unsigned() -- 2010-05-01 285 1.1 port to rri V2 interface, add RB_ADDR generic; -- rename c_rp_addr_* -> c_rb_addr_* -- 2008-05-03 143 1.0.8 rename _cpursta->_cpurust -- 2008-04-27 140 1.0.7 use cpursta interface, remove cpufail -- 2008-03-02 121 1.0.6 set RP_ERR when cmderr or cmdmerr status seen -- 2008-02-24 119 1.0.5 support lah,rps,wps cp commands -- 2008-01-20 113 1.0.4 use single LAM; change to RRI_LAM interface -- 2007-10-12 88 1.0.3 avoid ieee.std_logic_unsigned, use cast to unsigned -- 2007-08-16 74 1.0.2 add AP_LAM interface to pdp11_core_rri -- 2007-08-12 73 1.0.1 use def's; add stat command; wait for step complete -- 2007-07-08 65 1.0 Initial version ------------------------------------------------------------------------------ -- -- rbus registers: -- -- Address Bits Name r/w/i Function -- -- bbb00000 conf r/w/- cpu configuration (e.g. cpu type) -- (currently unused, all bits MBZ) -- bbb00001 cntl -/f/- cpu control -- 3:0 func function code -- 0000: noop -- 0001: start -- 0010: stop -- 0011: continue -- 0100: step -- 1111: reset (soft) -- bbb00010 stat r/-/- cpu status -- 7:04 cpurust r/-/- cp_stat: cpurust -- 3 cpuhalt r/-/- cp_stat: cpuhalt -- 2 cpugo r/-/- cp_stat: cpugo -- 1 cmdmerr r/-/- cp_stat: cmdmerr -- 0 cmderr r/-/- cp_stat: cmderr -- bbb00011 psw r/w/- processor status word access -- bbb00100 al r/w/- address register, low -- bbb00101 ah r/w/- address register, high -- 7 ubm r/w/- ubmap access -- 6 p22 r/w/- 22bit access -- 5: 0 addr r/w/- addr(21:16) -- bbb00110 mem r/w/- memory access -- bbb00111 memi r/w/- memory access, inc address -- bbb01rrr gpr[] r/w/- general purpose regs -- bbb10000 ibrb r/w/- ibr base address -- 12:06 base r/w/- ibr window base address -- 1:00 we r/w/- byte enables (00 equivalent to 11) -- www----- ibr[] r/w/- ibr window (32 words) -- library ieee; use ieee.std_logic_1164.all; use ieee.numeric_std.all; use work.slvtypes.all; use work.rblib.all; use work.pdp11.all; -- ---------------------------------------------------------------------------- entity pdp11_core_rbus is -- core to rbus interface generic ( RB_ADDR_CORE : slv8 := slv(to_unsigned(2#00000000#,8)); RB_ADDR_IBUS : slv8 := slv(to_unsigned(2#10000000#,8))); port ( CLK : in slbit; -- clock RESET : in slbit; -- reset RB_MREQ : in rb_mreq_type; -- rbus: request RB_SRES : out rb_sres_type; -- rbus: response RB_STAT : out slv3; -- rbus: status flags RB_LAM : out slbit; -- remote attention CPU_RESET : out slbit; -- cpu master reset CP_CNTL : out cp_cntl_type; -- console control port CP_ADDR : out cp_addr_type; -- console address port CP_DIN : out slv16; -- console data in CP_STAT : in cp_stat_type; -- console status port CP_DOUT : in slv16 -- console data out ); end pdp11_core_rbus; architecture syn of pdp11_core_rbus is type state_type is ( s_idle, -- s_idle: wait for rp access s_cpwait, -- s_cpwait: wait for cp port ack s_cpstep -- s_cpstep: wait for cpustep done ); type regs_type is record state : state_type; -- state rbselc : slbit; -- rbus select for core rbseli : slbit; -- rbus select for ibus cpreq : slbit; -- cp request flag cpfunc : slv5; -- cp function cpugo_1 : slbit; -- prev cycle cpugo addr : slv22_1; -- address register ena_22bit : slbit; -- 22bit enable ena_ubmap : slbit; -- ubmap enable ibrbase : slv(c_ibrb_ibf_base); -- ibr base address ibrbe : slv2; -- ibr byte enables ibrberet : slv2; -- ibr byte enables (for readback) doinc : slbit; -- at cmdack: do addr reg inc waitstep : slbit; -- at cmdack: wait for cpu step complete end record regs_type; constant regs_init : regs_type := ( s_idle, -- state '0','0', -- rbselc,rbseli '0', -- cpreq (others=>'0'), -- cpfunc '0', -- cpugo_1 (others=>'0'), -- addr '0','0', -- ena_22bit, ena_ubmap (others=>'0'),"00","00", -- ibrbase, ibrbe, ibrberet '0','0' -- doinc, waitstep ); signal R_REGS : regs_type := regs_init; -- state registers signal N_REGS : regs_type := regs_init; -- next value state regs begin proc_regs: process (CLK) begin if rising_edge(CLK) then if RESET = '1' then R_REGS <= regs_init; else R_REGS <= N_REGS; end if; end if; end process proc_regs; proc_next: process (R_REGS, RB_MREQ, CP_STAT, CP_DOUT) variable r : regs_type := regs_init; variable n : regs_type := regs_init; variable irb_ack : slbit := '0'; variable irb_busy : slbit := '0'; variable irb_err : slbit := '0'; variable irb_dout : slv16 := (others=>'0'); variable irb_lam : slbit := '0'; variable irbena : slbit := '0'; variable icpreq : slbit := '0'; variable icpureset : slbit := '0'; variable icpaddr : cp_addr_type := cp_addr_init; begin r := R_REGS; n := R_REGS; irb_ack := '0'; irb_busy := '0'; irb_err := '0'; irb_dout := (others=>'0'); irb_lam := '0'; irbena := RB_MREQ.re or RB_MREQ.we; icpreq := '0'; icpureset := '0'; -- look for init's against the rbus base address, generate subsystem resets if RB_MREQ.init='1' and RB_MREQ.we='1' and RB_MREQ.addr=RB_ADDR_CORE then icpureset := RB_MREQ.din(0); end if; -- rbus address decoder n.rbseli := '0'; n.rbselc := '0'; if RB_MREQ.aval='1' then if RB_MREQ.addr(7 downto 5)=RB_ADDR_CORE(7 downto 5) then n.rbselc := '1'; end if; if RB_MREQ.addr(7 downto 5)=RB_ADDR_IBUS(7 downto 5) then n.rbseli := '1'; end if; end if; if (r.rbselc='1' or r.rbseli='1') and irbena='1' then irb_ack := '1'; -- ack all (maybe rejected later) end if; case r.state is when s_idle => -- s_idle: wait for rbus access ------ n.doinc := '0'; n.waitstep := '0'; if r.rbseli = '1' then if irbena = '1' then n.cpfunc := c_cpfunc_rmem; n.cpfunc(0) := RB_MREQ.we; icpreq := '1'; end if; elsif r.rbselc = '1' then case RB_MREQ.addr(4 downto 0) is when c_rbaddr_conf => -- conf ------------------------- null; -- currently no action when c_rbaddr_cntl => -- cntl ------------------------- if irbena = '1' then n.cpfunc := RB_MREQ.din(n.cpfunc'range); end if; if RB_MREQ.we = '1' then icpreq := '1'; if RB_MREQ.din(3 downto 0) = c_cpfunc_step(3 downto 0) then n.waitstep := '1'; end if; end if; when c_rbaddr_stat => -- stat ------------------------- irb_dout(c_stat_rbf_cmderr) := CP_STAT.cmderr; irb_dout(c_stat_rbf_cmdmerr) := CP_STAT.cmdmerr; irb_dout(c_stat_rbf_cpugo) := CP_STAT.cpugo; irb_dout(c_stat_rbf_cpuhalt) := CP_STAT.cpuhalt; irb_dout(c_stat_rbf_cpurust) := CP_STAT.cpurust; when c_rbaddr_psw => -- psw -------------------------- if irbena = '1' then n.cpfunc := c_cpfunc_rpsw; n.cpfunc(0) := RB_MREQ.we; icpreq := '1'; end if; when c_rbaddr_al => -- al --------------------------- irb_dout(c_al_rbf_addr) := r.addr(c_al_rbf_addr); if RB_MREQ.we = '1' then n.addr := (others=>'0'); -- write to al clears ah !! n.ena_22bit := '0'; n.ena_ubmap := '0'; n.addr(c_al_rbf_addr) := RB_MREQ.din(c_al_rbf_addr); end if; when c_rbaddr_ah => -- ah --------------------------- irb_dout(c_ah_rbf_ena_ubmap) := r.ena_ubmap; irb_dout(c_ah_rbf_ena_22bit) := r.ena_22bit; irb_dout(c_ah_rbf_addr) := r.addr(21 downto 16); if RB_MREQ.we = '1' then n.addr(21 downto 16) := RB_MREQ.din(c_ah_rbf_addr); n.ena_22bit := RB_MREQ.din(c_ah_rbf_ena_22bit); n.ena_ubmap := RB_MREQ.din(c_ah_rbf_ena_ubmap); end if; when c_rbaddr_mem => -- mem ----------------- if irbena = '1' then n.cpfunc := c_cpfunc_rmem; n.cpfunc(0) := RB_MREQ.we; icpreq := '1'; end if; when c_rbaddr_memi => -- memi ---------------- if irbena = '1' then n.cpfunc := c_cpfunc_rmem; n.cpfunc(0) := RB_MREQ.we; n.doinc := '1'; icpreq := '1'; end if; when c_rbaddr_r0 | c_rbaddr_r1 | c_rbaddr_r2 | c_rbaddr_r3 | c_rbaddr_r4 | c_rbaddr_r5 | c_rbaddr_sp | c_rbaddr_pc => -- r* ------------------ if irbena = '1' then n.cpfunc := c_cpfunc_rreg; n.cpfunc(0) := RB_MREQ.we; icpreq := '1'; end if; when c_rbaddr_ibrb => -- ibrb ---------------- irb_dout(c_ibrb_ibf_base) := r.ibrbase; irb_dout(c_ibrb_ibf_be) := r.ibrberet; if RB_MREQ.we = '1' then n.ibrbase := RB_MREQ.din(c_ibrb_ibf_base); n.ibrberet := RB_MREQ.din(c_ibrb_ibf_be); if RB_MREQ.din(c_ibrb_ibf_be) = "00" then -- both be=0 ? n.ibrbe := "11"; else -- otherwise take 2 LSB's n.ibrbe := RB_MREQ.din(c_ibrb_ibf_be); end if; end if; when others => irb_ack := '0'; end case; end if; if icpreq = '1' then irb_busy := '1'; n.cpreq := '1'; n.state := s_cpwait; end if; when s_cpwait => -- s_cpwait: wait for cp port ack ---- n.cpreq := '0'; -- cpreq only for 1 cycle if (r.rbselc or r.rbseli)='0' or irbena='0' then -- rbus cycle abort n.state := s_idle; -- quit else irb_dout := CP_DOUT; irb_err := CP_STAT.cmderr or CP_STAT.cmdmerr; if CP_STAT.cmdack = '1' then -- normal cycle end if r.doinc = '1' then n.addr := slv(unsigned(r.addr) + 1); end if; if r.waitstep = '1' then irb_busy := '1'; n.state := s_cpstep; else n.state := s_idle; end if; else irb_busy := '1'; end if; end if; when s_cpstep => -- s_cpstep: wait for cpustep done --- if r.rbselc='0' or irbena='0' then -- rbus cycle abort n.state := s_idle; -- quit else if CP_STAT.cpustep = '0' then -- cpustep done n.state := s_idle; else irb_busy := '1'; end if; end if; when others => null; end case; icpaddr := cp_addr_init; icpaddr.addr := r.addr; icpaddr.racc := '0'; icpaddr.be := "11"; icpaddr.ena_22bit := r.ena_22bit; icpaddr.ena_ubmap := r.ena_ubmap; if r.rbseli = '1' and irbena = '1' then icpaddr.addr(15 downto 13) := "111"; icpaddr.addr(c_ibrb_ibf_base) := r.ibrbase; icpaddr.addr(5 downto 1) := RB_MREQ.addr(4 downto 0); icpaddr.racc := '1'; icpaddr.be := r.ibrbe; icpaddr.ena_22bit := '0'; icpaddr.ena_ubmap := '0'; end if; n.cpugo_1 := CP_STAT.cpugo; -- delay cpugo if CP_STAT.cpugo='0' and r.cpugo_1='1' then -- cpugo 1 -> 0 transition ? irb_lam := '1'; end if; N_REGS <= n; RB_SRES.ack <= irb_ack; RB_SRES.err <= irb_err; RB_SRES.busy <= irb_busy; RB_SRES.dout <= irb_dout; RB_STAT(0) <= CP_STAT.cpugo; RB_STAT(1) <= CP_STAT.cpuhalt or CP_STAT.cpurust(CP_STAT.cpurust'left); RB_STAT(2) <= CP_STAT.cmderr or CP_STAT.cmdmerr; RB_LAM <= irb_lam; CPU_RESET <= icpureset; CP_CNTL.req <= r.cpreq; CP_CNTL.func <= r.cpfunc; CP_CNTL.rnum <= RB_MREQ.addr(2 downto 0); CP_ADDR <= icpaddr; CP_DIN <= RB_MREQ.din; end process proc_next; end syn;
Go to most recent revision | Compare with Previous | Blame | View Log