URL
https://opencores.org/ocsvn/w11/w11/trunk
Subversion Repositories w11
[/] [w11/] [tags/] [w11a_V0.7/] [tools/] [bin/] [config_wrapper] - Rev 40
Go to most recent revision | Compare with Previous | Blame | View Log
#!/usr/bin/perl -w
# $Id: config_wrapper 534 2013-09-22 21:37:24Z mueller $
#
# Copyright 2010-2013 by Walter F.J. Mueller <W.F.J.Mueller@gsi.de>
#
# This program is free software; you may redistribute and/or modify it under
# the terms of the GNU General Public License as published by the Free
# Software Foundation, either version 2, or at your option any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# for complete details.
#
# Revision History:
# Date Rev Version Comment
# 2013-09-21 534 1.1.8 add nexys4 support
# 2013-01-02 467 1.1.7 jconfig: prepend '0x' to support 'jtag #2007'
# 2012-02-11 457 1.1.6 jconfig: use RETRO_FX2_VID/PID for USB VID/PID
# 2011-12-03 435 1.1.5 add nexys3 support;
# 2011-08-04 402 1.1.4 add atlys support;
# 2011-07-25 399 1.1.3 add nexys2-500 support; bsdl path for sp605
# 2011-07-18 395 1.1.2 cleanup bsdl path creation for jtag
# 2011-07-17 394 1.1.1 add bit->svf conversion and config with jtag
# 2011-07-11 393 1.1 renamed from impact_wrapper; add function parameter,
# old action with 'iconfig'
# 2011-07-01 386 1.0.3 support sp605/xc6slx45t
# 2010-05-24 294 1.0.2 support nexys2/xc3s1200e
# 2010-04-24 282 1.0.1 proper error exit for GetOptions()
# 2010-04-24 281 1.0 Initial version
#
use 5.005; # require Perl 5.005 or higher
use strict; # require strict checking
use FileHandle;
use Getopt::Long;
my %opts = ();
GetOptions(\%opts, "help", "dry_run", "board=s", "path=s") or exit 1;
# setup defaults for board and path
if (not defined $opts{board}) {
$opts{board} = "s3board";
}
if (not defined $opts{path}) {
$opts{path} = "xc3s1000" if $opts{board} eq "s3board";
$opts{path} = "xc3s1200e" if $opts{board} eq "nexys2";
$opts{path} = "xc6slx16" if $opts{board} eq "nexys3";
$opts{path} = "xc7a100t" if $opts{board} eq "nexys4";
$opts{path} = "xc6slx45" if $opts{board} eq "atlys";
$opts{path} = "xc6slx45t" if $opts{board} eq "sp605";
}
sub print_help;
sub run_command;
autoflush STDOUT 1 if (-p STDOUT); # autoflush if output into pipe
if (exists $opts{help}) {
print_help;
exit 0;
}
my $board = $opts{board};
my $ipath = $opts{path};
$ipath =~ s/-.*$//; # trim all after first '-'
# now setup JTAG chain config
my @plist;
my $pfpga;
#
# Note: when new targets are added update also the blist logic below
#
if ($board eq "s3board" && $ipath eq "xc3s200") { # S3BOARD-200
@plist = ($ipath, "xcf02s");
$pfpga = 1;
} elsif ($board eq "s3board" && $ipath eq "xc3s1000") { # S3BOARD-1200
@plist = ($ipath, "xcf04s");
$pfpga = 1;
} elsif ($board eq "nexys2" && $ipath eq "xc3s1200e") { # nexys2-1200
@plist = ($ipath, "xcf04s");
$pfpga = 1;
} elsif ($board eq "nexys2" && $ipath eq "xc3s500e") { # nexys2-500
@plist = ($ipath, "xcf04s");
$pfpga = 1;
} elsif ($board eq "nexys3" && $ipath eq "xc6slx16") { # nexys3
@plist = ($ipath);
$pfpga = 1;
} elsif ($board eq "nexys4" && $ipath eq "xc7a100t") { # nexys4
@plist = ($ipath);
$pfpga = 1;
} elsif ($board eq "atlys" && $ipath eq "xc6slx45") { # atlys
@plist = ($ipath);
$pfpga = 1;
} elsif ($board eq "sp605" && $ipath eq "xc6slx45t") { # sp605
@plist = ("xccace", $ipath);
$pfpga = 2;
} else {
print STDERR
"config_wrapper-E: only s3board/nexys2,3/atlys/sp605 supported\n";
exit 1;
}
my @blist;
foreach my $part (@plist) {
if ($part =~ m/^xcf/) { push @blist, "xcf/data" } # proms
elsif ($part =~ m/^xc3s\d*$/) { push @blist, "spartan3/data" } # s-3
elsif ($part =~ m/^xc3s\d*e$/) { push @blist, "spartan3e/data" } # s-3e
elsif ($part =~ m/^xc6slx\d*t?$/) { push @blist, "spartan6/data" }# s-6 lx
elsif ($part =~ m/^xc7a\d*t?$/) { push @blist, "artix7/data" } # 7-a
elsif ($part =~ m/^xccace$/) { push @blist, "acempm/data" } # sys-ace
else {
print STDERR "config_wrapper-E: no bsdl path known for $part\n";
exit 1;
}
}
my $cmd = shift @ARGV;
my $file = shift @ARGV;
if (! defined $cmd) {
print STDERR "config_wrapper-E: no command specified\n";
exit 1;
}
if (! defined $file) {
print STDERR "config_wrapper-E: no bit or svf file specified\n";
exit 1;
}
if (! -r $file) {
print STDERR "config_wrapper-E: input file not found or readable\n";
exit 1;
}
my $xilpath = $ENV{XILINX};
if (! defined $xilpath) {
print STDERR "config_wrapper-E: XILINX environment variable not defined\n";
exit 1;
}
# ----- iconfig action --------------------------------------------------------
if ($cmd eq "iconfig") {
my $tmpfile = "tmp_config_wrapper.cmd";
open (OFILE, ">$tmpfile") or die "Couldn't open tmp cmd file: $!";
print OFILE "setMode -bs\n";
print OFILE "setCable -p auto\n";
for (my $i = 0; $i<=$#plist; $i++) {
printf OFILE "addDevice -p %d -part %s\n", $i+1, $plist[$i];
}
printf OFILE "assignFile -p %d -file %s\n", $pfpga, $file;
printf OFILE "program -p %d -verify\n", $pfpga;
print OFILE "quit\n";
close (OFILE) or die "Couldn't close tmp cmd file: $!";
my $rc = run_command("impact -batch", $tmpfile);
exit $rc;
# ----- jconfig action --------------------------------------------------------
} elsif ($cmd eq "jconfig") {
my $bpath = join ";", map "$xilpath/$_",@blist;
my $tmpfile = "tmp_config_wrapper.cmd";
open (OFILE, ">$tmpfile") or die "Couldn't open tmp cmd file: $!";
# the UrJtag and Xilinx impact have different chain and part number schemes
# impact: 1-based, 1 is first in chain;
# UrJtag: 0-based, 0 is last in chain;
# e.g. on Digilent Nexys2:
# impact: (1) FPGA (2) PROM
# UrJtag: (1) FPGA (0) PROM
my $jtag_part = $#plist + 1 - $pfpga;
# handle USB VID/PID of board
# taken from RETRO_FX2_VID and RETRO_FX2_PID environment variables
# in the retro11 project the default is:
# VID: 16c0 (VOTI)
# PID: 03ef (VOTI free for internal lab use 1007)
#
# !! Important Note on Usage of this USB VID/PID !!
# This VID/PID is owned by VOTI, a small dutch company. Usage is granted
# for 'internal lab use only' by VOTI under the conditions:
# - the gadgets in which you use those PIDs do not leave your desk
# - you won't complain to VOTI if you get in trouble with duplicate PIDs
# (for instance because someone else did not follow the previous rule).
# See also http://www.voti.nl/pids/pidfaq.html
#
my $fx2_vid = $ENV{RETRO_FX2_VID};
my $fx2_pid = $ENV{RETRO_FX2_PID};
$fx2_vid = "16c0" unless defined $fx2_vid;
$fx2_pid = "03ef" unless defined $fx2_pid;
# give vid/pid with 0x prefix. jtag #2007 requires this, #1502 tolerates
print OFILE "cable usbblaster vid=0x$fx2_vid pid=0x$fx2_pid\n";
printf OFILE "bsdl path %s\n", $bpath;
print OFILE "detect\n";
printf OFILE "part %d\n", $jtag_part;
printf OFILE "svf %s\n", $file;
close (OFILE) or die "Couldn't close tmp cmd file: $!";
my $rc = run_command("jtag", $tmpfile);
exit $rc;
# ----- bit2svf action --------------------------------------------------------
} elsif ($cmd eq "bit2svf") {
my $ofile = $file;
$ofile =~ s/\.bit/\.svf/;
my $tmpfile = "tmp_config_wrapper.cmd";
open (OFILE, ">$tmpfile") or die "Couldn't open tmp cmd file: $!";
print OFILE "setMode -bs\n";
printf OFILE "setCable -port svf -file %s\n", $ofile;
printf OFILE "addDevice -p 1 -file %s\n", $file;
print OFILE "program -p 1\n";
print OFILE "quit\n";
close (OFILE) or die "Couldn't close tmp cmd file: $!";
my $rc = run_command("impact -batch", $tmpfile);
exit $rc;
}
print STDERR "config_wrapper-E: command must be bit2svf, iconfig or jconfig\n";
exit 1;
#-------------------------------------------------------------------------------
sub run_command {
my ($cmd, $tmpfile) = @_;
my $wrc;
if (defined $opts{dry_run}) {
print STDOUT "$cmd\n";
$wrc = system "/bin/sh", "-c", "cat $tmpfile";
} else {
$wrc = system "/bin/sh", "-c", "$cmd $tmpfile";
}
my $rc = 0;
if ($wrc != 0) {
my $rc = int($wrc/256);
if ($rc == 0) {
my $sig = $wrc % 256;
print STDERR "config_wrapper-I $cmd aborted by signal $sig\n";
$rc = 1;
} else {
print STDERR "config_wrapper-I $cmd failed (rc=$rc) $?\n";
}
}
unlink $tmpfile or die "Couldn't delete tmp cmd file: $!";
return $rc;
}
#-------------------------------------------------------------------------------
sub print_help {
print "usage: config_wrapper [--help] [--board=b] [--path=p] cmd file\n";
print " cmd bit2svf or iconfig or jconfig\n";
print " --help this message\n";
print " --dry_run print impact command list\n";
print " --board=b type of board\n";
print " --path=p type of fpga\n";
}
Go to most recent revision | Compare with Previous | Blame | View Log