URL
https://opencores.org/ocsvn/w11/w11/trunk
Subversion Repositories w11
[/] [w11/] [tags/] [w11a_V0.7/] [tools/] [oskit/] [rsx11m-31_rk/] [README_rsx11m-31_rkset.txt] - Rev 30
Go to most recent revision | Compare with Previous | Blame | View Log
# $Id: README_rsx11m-31_rkset.txt 680 2015-05-14 13:29:46Z mueller $
Notes on oskit: RSX-11M V3.1 system on RK05 volumes
Table of content:
1. General remarks
2. Installation
3. Usage
1. General remarks ---------------------------------------------------
See notes, especially on legal terms, in $RETROBASE/doc/w11a_os_guide.txt
Also read README_license.txt which is included in the oskit !!
2. Installation ------------------------------------------------------
- A disk set is available from
http://www.retro11.de/data/oc_w11/oskits/rsx11m-31_rkset.tgz
Download, unpack and copy the disk images (*.dsk), e.g.
cd $RETROBASE/tools/oskit/rsx11m-31_rk
wget http://www.retro11.de/data/oc_w11/oskits/rsx11m-31_rkset.tgz
tar -xzf rsx11m-31_rkset.tgz
3. Usage -------------------------------------------------------------
- Start them in simulator
pdp11 rsx11m-31_rk_boot.scmd
or ONLY IF YOU HAVE A VALID LICENSE on w11a
ti_w11 <opt> @rsx11m-31_rk_boot.tcl
where <opt> is the proper option set for the board.
- Hit <ENTER> in the xterm window to connect to simh or backend server.
The boot dialog in the console xterm window will look like
(required input is in {..}, with {<CR>} denoting a carriage return:
RSX-11M V3.1 BL22 65408K MAPPED
>RED DK0:=SY0:
>RED DK0:=LB0:
>MOU DK0:SYSTEM0
>@[1,2]STARTUP
That RSX shows '65408K' is a bug in V3.1. It should be 1920K' the
size of accessible memory in words. For configurations with 1 MByte
and below the correct value is displayed, above a wrong one.
This os version was released in December 1977, so it's no suprise
that it is not y2k ready. So enter a date before prior to 2000.
>* PLEASE ENTER TIME AND DATE (HR:MN DD-MMM-YY) [S]: {<.. see above ..>}
>TIM 17:18 12-may-83
>;
>RUN ERRLOG
>
;ERL -- ERROR LOG INITIALIZED
>MOU DK1:SYSTEM1
>;
>INS DK1:[1,54]BIGMAC/PAR=GEN
>INS DK1:[1,54]BIGTKB/PAR=GEN
>INS DK1:[1,54]CDA
>INS DK1:[1,54]DSC/PAR=GEN
>INS DK1:[1,54]EDT/PAR=GEN
>INS DK1:[1,54]FLX
>INS DK1:[1,54]FOR
>INS DK1:[1,54]FTB
>INS DK1:[1,54]LBR
>INS DK1:[1,54]PSE
>INS DK1:[1,54]RNO
>INS DK1:[1,54]SRD
>INS DK1:[1,54]SYE
>;
>INS DK1:[1,54]TEC
>INS DK1:[1,54]TEC/TASK=...MAK
>INS DK1:[1,54]TEC/TASK=...MUN
>;
>INS DK1:[1,54]VTEC
>;
>;
>SET /UIC=[1,6]
>PSE =
>SET /UIC=[200,200]
>;
>ACS DK1:/BLKS=512.
>;
>@ <EOF>
>
Now you are at the MCR prompt and can exercise the system.
At the end is important to shutdown properly with a 'run $shutup'.
The simululaor (or the rlink backend) can be stopped when the
CPU has halted.
Go to most recent revision | Compare with Previous | Blame | View Log