Subversion Repositories w11

-- $Id: nexys4_cram_dummy.vhd 643 2015-02-07 17:41:53Z mueller $
--
-- Copyright 2013-2015 by Walter F.J. Mueller <W.F.J.Mueller@gsi.de>
--
-- This program is free software; you may redistribute and/or modify it under
-- the terms of the GNU General Public License as published by the Free
-- Software Foundation, either version 2, or at your option any later version.
--
-- This program is distributed in the hope that it will be useful, but
-- WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
-- or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-- for complete details.
-- 
------------------------------------------------------------------------------
-- Module Name:    nexys4_cram_dummy - syn
-- Description:    nexys4 target (base; serport loopback, cram protect)
--
-- Dependencies:   -
-- To test:        tb_nexys4_cram
-- Target Devices: generic
-- Tool versions:  ise 14.5-14.7; viv 2014.4; ghdl 0.29-0.31
--
-- Revision History: 
-- Date         Rev Version  Comment
-- 2015-02-01   641   1.1    separate I_BTNRST_N
-- 2013-09-21   534   1.0    Initial version (derived from nexys3_dummy)
------------------------------------------------------------------------------
 
library ieee;
use ieee.std_logic_1164.all;
 
use work.slvtypes.all;
use work.nxcramlib.all;
 
entity nexys4_cram_dummy is             -- NEXYS 4 dummy (base+cram)
                                        -- implements nexys4_cram_aif
  port (
    I_CLK100 : in slbit;                -- 100 MHz board clock
    I_RXD : in slbit;                   -- receive data (board view)
    O_TXD : out slbit;                  -- transmit data (board view)
    O_RTS_N : out slbit;                -- rx rts (board view; act.low)
    I_CTS_N : in slbit;                 -- tx cts (board view; act.low)
    I_SWI : in slv16;                   -- n4 switches
    I_BTN : in slv5;                    -- n4 buttons
    I_BTNRST_N : in slbit;              -- n4 reset button
    O_LED : out slv16;                  -- n4 leds
    O_RGBLED0 : out slv3;               -- n4 rgb-led 0
    O_RGBLED1 : out slv3;               -- n4 rgb-led 1
    O_ANO_N : out slv8;                 -- 7 segment disp: anodes   (act.low)
    O_SEG_N : out slv8;                 -- 7 segment disp: segments (act.low)
    O_MEM_CE_N : out slbit;             -- cram: chip enable   (act.low)
    O_MEM_BE_N : out slv2;              -- cram: byte enables  (act.low)
    O_MEM_WE_N : out slbit;             -- cram: write enable  (act.low)
    O_MEM_OE_N : out slbit;             -- cram: output enable (act.low)
    O_MEM_ADV_N  : out slbit;           -- cram: address valid (act.low)
    O_MEM_CLK : out slbit;              -- cram: clock
    O_MEM_CRE : out slbit;              -- cram: command register enable
    I_MEM_WAIT : in slbit;              -- cram: mem wait
    O_MEM_ADDR  : out slv23;            -- cram: address lines
    IO_MEM_DATA : inout slv16           -- cram: data lines
  );
end nexys4_cram_dummy;
 
architecture syn of nexys4_cram_dummy is
 
begin
 
  O_TXD    <= I_RXD;                    -- loop back serport
  O_RTS_N  <= I_CTS_N;
 
  O_LED    <= I_SWI;                    -- mirror SWI on LED
 
  O_RGBLED0 <= I_BTN(2 downto 0);       -- mirror BTN on RGBLED
  O_RGBLED1 <= not I_BTNRST_N & I_BTN(4) & I_BTN(3);
 
  O_ANO_N <= (others=>'1');
  O_SEG_N <= (others=>'1');
 
  CRAM : nx_cram_dummy                  -- connect CRAM to protection dummy
    port map (
      O_MEM_CE_N  => O_MEM_CE_N,
      O_MEM_BE_N  => O_MEM_BE_N,
      O_MEM_WE_N  => O_MEM_WE_N,
      O_MEM_OE_N  => O_MEM_OE_N,
      O_MEM_ADV_N => O_MEM_ADV_N,
      O_MEM_CLK   => O_MEM_CLK,
      O_MEM_CRE   => O_MEM_CRE,
      I_MEM_WAIT  => I_MEM_WAIT,
      O_MEM_ADDR  => O_MEM_ADDR,
      IO_MEM_DATA => IO_MEM_DATA
    );
 
end syn;