Subversion Repositories wbuart32

////////////////////////////////////////////////////////////////////////////////
//
// Filename: 	uartsim.h
//
// Project:	wbuart32, a full featured UART with simulator
//
// Purpose:	To forward a Verilator simulated UART link over a TCP/IP pipe.
//
//	This file provides the description of the interface between the UARTSIM
//	and the rest of the world.  See below for more detailed descriptions.
//
// Creator:	Dan Gisselquist, Ph.D.
//		Gisselquist Technology, LLC
//
////////////////////////////////////////////////////////////////////////////////
//
// Copyright (C) 2015-2016, Gisselquist Technology, LLC
//
// This program is free software (firmware): you can redistribute it and/or
// modify it under the terms of  the GNU General Public License as published
// by the Free Software Foundation, either version 3 of the License, or (at
// your option) any later version.
//
// This program is distributed in the hope that it will be useful, but WITHOUT
// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with this program.  (It's in the $(ROOT)/doc directory, run make with no
// target there if the PDF file isn't present.)  If not, see
// <http://www.gnu.org/licenses/> for a copy.
//
// License:	GPL, v3, as defined and found on www.gnu.org,
//		http://www.gnu.org/licenses/gpl.html
//
//
////////////////////////////////////////////////////////////////////////////////
//
//
#ifndef	UARTSIM_H
#define	UARTSIM_H
 
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <poll.h>
#include <unistd.h>
#include <arpa/inet.h>
#include <signal.h>
 
#define	TXIDLE	0
#define	TXDATA	1
#define	RXIDLE	0
#define	RXDATA	1
 
class	UARTSIM	{
	// The file descriptors:
	//	m_skt   is the socket/port we are listening on
	//	m_conrd is the file descriptor to read from
	//	m_conwr is the file descriptor to write to
	int	m_skt, m_conrd, m_conwr;
	//
	// The m_setup register is the 29'bit control register used within
	// the core.
	unsigned m_setup;
	// And the pieces of the setup register broken out.
	int	m_nparity, m_fixdp, m_evenp, m_nbits, m_nstop, m_baud_counts;
 
	// UART state
	int	m_rx_baudcounter, m_rx_state, m_rx_busy,
		m_rx_changectr, m_last_tx;
	int	m_tx_baudcounter, m_tx_state, m_tx_busy;
	unsigned	m_rx_data, m_tx_data;
 
	// setup_listener is an attempt to encapsulate all of the network
	// related setup stuff.
	void	setup_listener(const int port);
 
	// nettick() gets called if we are connected to a network, and
	int	nettick(const int i_tx);
	// fdtick() if we are not.
	int	fdtick(const int i_tx);
 
	// We'll use the file descriptor for the listener socket to determine
	// whether we are connected to the network or not.  If not connected
	// to the network, then we assume m_conrd and m_conwr refer to 
	// your more traditional file descriptors, and use them as such.
	int	tick(const int i_tx) {
		if (m_skt >= 0)
			return nettick(i_tx);
		else
			return fdtick(i_tx);
	}
 
public:
	//
	// The UARTSIM constructor takes one argument: the port on the
	// localhost to listen in on.  Once started, connections may be made
	// to this port to get the output from the port.
	UARTSIM(const int port);
 
	// kill() closes any active connection and the socket.  Once killed,
	// no further output will be sent to the port.
	void	kill(void);
 
	// setup() busts out the bits from isetup to the various internal
	// parameters.  It is ideally only called between bits at appropriate
	// transition intervals. 
	void	setup(unsigned isetup);
 
	// The operator() function is called on every tick.  The input is the
	// the output txuart transmit wire from the device.  The output is to
	// be connected to the the rxuart receive wire into the device.  This
	// makes hookup and operation very simple.
	//
	// This is the most appropriate simulation entry function if the 
	// setup register will never change.
	//
	int	operator()(int i_tx) {
		return tick(i_tx); }
 
	// If there is a possibility that the core might change the UART setup,
	// then it makes sense to include that current setup when calling the
	// tick operator.
	int	operator()(int i_tx, unsigned isetup) {
		setup(isetup); return tick(i_tx); }
};
 
#endif