URL
https://opencores.org/ocsvn/wiegand_ctl/wiegand_ctl/trunk
Subversion Repositories wiegand_ctl
[/] [wiegand_ctl/] [trunk/] [syn/] [altera/] [wiegand_tx/] [output_files/] [wiegand_tx_top.pin] - Rev 17
Compare with Previous | Blame | View Log
-- Copyright (C) 1991-2014 Altera Corporation. All rights reserved.
-- Your use of Altera Corporation's design tools, logic functions
-- and other software and tools, and its AMPP partner logic
-- functions, and any output files from any of the foregoing
-- (including device programming or simulation files), and any
-- associated documentation or information are expressly subject
-- to the terms and conditions of the Altera Program License
-- Subscription Agreement, the Altera Quartus II License Agreement,
-- the Altera MegaCore Function License Agreement, or other
-- applicable license agreement, including, without limitation,
-- that your use is for the sole purpose of programming logic
-- devices manufactured by Altera and sold by Altera or its
-- authorized distributors. Please refer to the applicable
-- agreement for further details.
--
-- This is a Quartus II output file. It is for reporting purposes only, and is
-- not intended for use as a Quartus II input file. This file cannot be used
-- to make Quartus II pin assignments - for instructions on how to make pin
-- assignments, please see Quartus II help.
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
-- NC : No Connect. This pin has no internal connection to the device.
-- DNU : Do Not Use. This pin MUST NOT be connected.
-- VCCPGM : Dedicated power pin for configuration, which MUST be connected to 1.8V, 2.5V or 3.0V depending on the requirements of the configuration device.
-- VCCINT : Dedicated power pin, which MUST be connected to VCC (1.2V).
-- VCCIO : Dedicated power pin, which MUST be connected to VCC
-- of its bank.
-- Bank 3: 2.5V
-- Bank 4: 2.5V
-- Bank 5: 2.5V
-- Bank 6: 2.5V
-- Bank 7: 2.5V
-- Bank 8: 2.5V
-- Bank 9: 2.5V
-- RREF : External reference resistor for the quad, MUST be connected to
-- GND via a 2k Ohm resistor.
-- GND : Dedicated ground pin. Dedicated GND pins MUST be connected to GND.
-- It can also be used to report unused dedicated pins. The connection
-- on the board for unused dedicated pins depends on whether this will
-- be used in a future design. One example is device migration. When
-- using device migration, refer to the device pin-tables. If it is a
-- GND pin in the pin table or if it will not be used in a future design
-- for another purpose the it MUST be connected to GND. If it is an unused
-- dedicated pin, then it can be connected to a valid signal on the board
-- (low, high, or toggling) if that signal is required for a different
-- revision of the design.
-- GND+ : Unused input pin. It can also be used to report unused dual-purpose pins.
-- This pin should be connected to GND. It may also be connected to a
-- valid signal on the board (low, high, or toggling) if that signal
-- is required for a different revision of the design.
-- GND* : Unused I/O pin. For transceiver I/O banks, connect each pin marked GND*
-- either individually through a 10k Ohm resistor to GND or tie all pins
-- together and connect through a single 10k Ohm resistor to GND.
-- RESERVED : Unused I/O pin, which MUST be left unconnected.
-- RESERVED_INPUT : Pin is tri-stated and should be connected to the board.
-- RESERVED_INPUT_WITH_WEAK_PULLUP : Pin is tri-stated with internal weak pull-up resistor.
-- RESERVED_INPUT_WITH_BUS_HOLD : Pin is tri-stated with bus-hold circuitry.
-- RESERVED_OUTPUT_DRIVEN_HIGH : Pin is output driven high.
-- GXB_GND* : Unused GXB Receiver or dedicated reference clock pin. This pin
-- must be connected to GXB_GND through a 10k Ohm resistor.
-- GXB_NC : Unused GXB Transmitter or dedicated clock output pin. This pin
-- must not be connected.
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
-- Pin directions (input, output or bidir) are based on device operating in user mode.
---------------------------------------------------------------------------------
Quartus II 64-Bit Version 14.0.0 Build 200 06/17/2014 SJ Web Edition
CHIP "wiegand_tx_top" ASSIGNED TO AN: EP4CGX22CF19C6
Pin Name/Usage : Location : Dir. : I/O Standard : Voltage : I/O Bank : User Assignment
-------------------------------------------------------------------------------------------------------------
GND : A1 : gnd : : : :
GND : A2 : gnd : : : :
GND : A3 : gnd : : : :
~ALTERA_DATA0~ / RESERVED_INPUT_WITH_WEAK_PULLUP : A4 : input : 2.5 V : : 9 : N
RESERVED_INPUT_WITH_WEAK_PULLUP : A5 : : : : 8 :
RESERVED_INPUT_WITH_WEAK_PULLUP : A6 : : : : 8 :
RESERVED_INPUT_WITH_WEAK_PULLUP : A7 : : : : 8 :
RESERVED_INPUT_WITH_WEAK_PULLUP : A8 : : : : 8 :
RESERVED_INPUT_WITH_WEAK_PULLUP : A9 : : : : 8 :
wb_dat_o[25] : A10 : output : 2.5 V : : 8 : N
wb_dat_o[18] : A11 : output : 2.5 V : : 8 : N
GND+ : A12 : : : : 7 :
wb_dat_o[15] : A13 : output : 2.5 V : : 7 : N
RESERVED_INPUT_WITH_WEAK_PULLUP : A14 : : : : 7 :
RESERVED_INPUT_WITH_WEAK_PULLUP : A15 : : : : 7 :
RESERVED_INPUT_WITH_WEAK_PULLUP : A16 : : : : 7 :
wb_cti_i[2] : A17 : input : 2.5 V : : 7 : N
RESERVED_INPUT_WITH_WEAK_PULLUP : A18 : : : : 7 :
GXB_NC : B1 : : : : QL0 :
GXB_NC : B2 : : : : QL0 :
GND : B3 : gnd : : : :
~ALTERA_ASDO~ / RESERVED_INPUT_WITH_WEAK_PULLUP : B4 : input : 2.5 V : : 9 : N
RESERVED_INPUT_WITH_WEAK_PULLUP : B5 : : : : 8 :
RESERVED_INPUT_WITH_WEAK_PULLUP : B6 : : : : 8 :
RESERVED_INPUT_WITH_WEAK_PULLUP : B7 : : : : 8 :
GND : B8 : gnd : : : :
RESERVED_INPUT_WITH_WEAK_PULLUP : B9 : : : : 8 :
wb_dat_o[11] : B10 : output : 2.5 V : : 8 : N
GND : B11 : gnd : : : :
GND+ : B12 : : : : 7 :
wb_dat_o[17] : B13 : output : 2.5 V : : 7 : N
GND : B14 : gnd : : : :
RESERVED_INPUT_WITH_WEAK_PULLUP : B15 : : : : 7 :
RESERVED_INPUT_WITH_WEAK_PULLUP : B16 : : : : 7 :
GND : B17 : gnd : : : :
RESERVED_INPUT_WITH_WEAK_PULLUP : B18 : : : : 7 :
GND : C1 : gnd : : : :
GND : C2 : gnd : : : :
GND : C3 : gnd : : : :
nCONFIG : C4 : : : : 9 :
~ALTERA_NCSO~ / RESERVED_INPUT_WITH_WEAK_PULLUP : C5 : input : 2.5 V : : 9 : N
RESERVED_INPUT_WITH_WEAK_PULLUP : C6 : : : : 8 :
RESERVED_INPUT_WITH_WEAK_PULLUP : C7 : : : : 8 :
wb_dat_o[16] : C8 : output : 2.5 V : : 8 : N
RESERVED_INPUT_WITH_WEAK_PULLUP : C9 : : : : 8 :
wb_dat_o[14] : C10 : output : 2.5 V : : 8 : N
wb_dat_o[9] : C11 : output : 2.5 V : : 8 : N
RESERVED_INPUT_WITH_WEAK_PULLUP : C12 : : : : 7 :
RESERVED_INPUT_WITH_WEAK_PULLUP : C13 : : : : 7 :
RESERVED_INPUT_WITH_WEAK_PULLUP : C14 : : : : 7 :
RESERVED_INPUT_WITH_WEAK_PULLUP : C15 : : : : 7 :
RESERVED_INPUT_WITH_WEAK_PULLUP : C16 : : : : 7 :
RESERVED_INPUT_WITH_WEAK_PULLUP : C17 : : : : 7 :
wb_sel_i[2] : C18 : input : 2.5 V : : 7 : N
GXB_GND* : D1 : : : : QL0 :
GXB_GND* : D2 : : : : QL0 :
nCE : D3 : : : : 9 :
TDI : D4 : input : : : 9 :
~ALTERA_DCLK~ : D5 : output : 2.5 V : : 9 : N
RESERVED_INPUT_WITH_WEAK_PULLUP : D6 : : : : 8 :
RESERVED_INPUT_WITH_WEAK_PULLUP : D7 : : : : 8 :
RESERVED_INPUT_WITH_WEAK_PULLUP : D8 : : : : 8 :
wb_sel_i[0] : D9 : input : 2.5 V : : 8 : N
one_o : D10 : output : 2.5 V : : 7 : N
wb_dat_o[27] : D11 : output : 2.5 V : : 7 : N
wb_dat_o[2] : D12 : output : 2.5 V : : 7 : N
RESERVED_INPUT_WITH_WEAK_PULLUP : D13 : : : : 7 :
RESERVED_INPUT_WITH_WEAK_PULLUP : D14 : : : : 7 :
RESERVED_INPUT_WITH_WEAK_PULLUP : D15 : : : : 7 :
RESERVED_INPUT_WITH_WEAK_PULLUP : D16 : : : : 7 :
RESERVED_INPUT_WITH_WEAK_PULLUP : D17 : : : : 6 :
RESERVED_INPUT_WITH_WEAK_PULLUP : D18 : : : : 6 :
GND : E1 : gnd : : : :
GND : E2 : gnd : : : :
TMS : E3 : input : : : 9 :
TDO : E4 : output : : : 9 :
TCK : E5 : input : : : 9 :
RESERVED_INPUT_WITH_WEAK_PULLUP : E6 : : : : 8 :
VCCIO8 : E7 : power : : 2.5V : 8 :
GND : E8 : gnd : : : :
VCCIO8 : E9 : power : : 2.5V : 8 :
wb_dat_i[6] : E10 : input : 2.5 V : : 7 : N
GND : E11 : gnd : : : :
RESERVED_INPUT_WITH_WEAK_PULLUP : E12 : : : : 7 :
VCCIO7 : E13 : power : : 2.5V : 7 :
GND : E14 : gnd : : : :
wb_sel_i[1] : E15 : input : 2.5 V : : 6 : N
RESERVED_INPUT_WITH_WEAK_PULLUP : E16 : : : : 6 :
GND : E17 : gnd : : : :
RESERVED_INPUT_WITH_WEAK_PULLUP : E18 : : : : 6 :
GXB_NC : F1 : : : : QL0 :
GXB_NC : F2 : : : : QL0 :
VCCL_GXB : F3 : power : : 1.2V : :
VCCIO9 : F4 : power : : 2.5V : 9 :
GND : F5 : gnd : : : :
VCCD_PLL : F6 : power : : 1.2V : :
VCCINT : F7 : power : : 1.2V : :
VCCIO8 : F8 : power : : 2.5V : 8 :
VCC_CLKIN8A : F9 : power : : 2.5V : 8A :
VCCIO7 : F10 : power : : 2.5V : 7 :
VCCIO7 : F11 : power : : 2.5V : 7 :
VCCIO7 : F12 : power : : 2.5V : 7 :
GND : F13 : gnd : : : :
VCCD_PLL : F14 : power : : 1.2V : :
RESERVED_INPUT_WITH_WEAK_PULLUP : F15 : : : : 6 :
RESERVED_INPUT_WITH_WEAK_PULLUP : F16 : : : : 6 :
RESERVED_INPUT_WITH_WEAK_PULLUP : F17 : : : : 6 :
RESERVED_INPUT_WITH_WEAK_PULLUP : F18 : : : : 6 :
GND : G1 : gnd : : : :
GND : G2 : gnd : : : :
VCCH_GXB : G3 : power : : 2.5V : :
VCCINT : G4 : power : : 1.2V : :
VCCA : G5 : power : : 2.5V : :
VCCINT : G6 : power : : 1.2V : :
GND : G7 : gnd : : : :
VCCINT : G8 : power : : 1.2V : :
GXB_GND* : G9 : : : : 8A :
GXB_GND* : G10 : : : : 8A :
GND : G11 : gnd : : : :
VCCINT : G12 : power : : 1.2V : :
VCCA : G13 : power : : 2.5V : :
VCCIO6 : G14 : power : : 2.5V : 6 :
RESERVED_INPUT_WITH_WEAK_PULLUP : G15 : : : : 6 :
zero_o : G16 : output : 2.5 V : : 6 : N
RESERVED_INPUT_WITH_WEAK_PULLUP : G17 : : : : 6 :
wb_sel_i[3] : G18 : input : 2.5 V : : 6 : N
GXB_GND* : H1 : : : : QL0 :
GXB_GND* : H2 : : : : QL0 :
VCCL_GXB : H3 : power : : 1.2V : :
GND : H4 : gnd : : : :
VCCINT : H5 : power : : 1.2V : :
GND : H6 : gnd : : : :
VCCINT : H7 : power : : 1.2V : :
GND : H8 : gnd : : : :
VCCINT : H9 : power : : 1.2V : :
GND : H10 : gnd : : : :
VCCINT : H11 : power : : 1.2V : :
GND : H12 : gnd : : : :
VCCINT : H13 : power : : 1.2V : :
GND : H14 : gnd : : : :
VCCIO6 : H15 : power : : 2.5V : 6 :
RESERVED_INPUT_WITH_WEAK_PULLUP : H16 : : : : 6 :
GND : H17 : gnd : : : :
GND+ : H18 : : : : 6 :
GND : J1 : gnd : : : :
GND : J2 : gnd : : : :
VCCA_GXB : J3 : power : : 2.5V : :
VCCINT : J4 : power : : 1.2V : :
GND : J5 : gnd : : : :
VCCINT : J6 : power : : 1.2V : :
GND : J7 : gnd : : : :
VCCINT : J8 : power : : 1.2V : :
GND : J9 : gnd : : : :
VCCINT : J10 : power : : 1.2V : :
GND : J11 : gnd : : : :
VCCINT : J12 : power : : 1.2V : :
GND : J13 : gnd : : : :
VCCINT : J14 : power : : 1.2V : :
VCCIO6 : J15 : power : : 2.5V : 6 :
wb_dat_o[10] : J16 : output : 2.5 V : : 6 : N
RESERVED_INPUT_WITH_WEAK_PULLUP : J17 : : : : 6 :
GND+ : J18 : : : : 6 :
GXB_NC : K1 : : : : QL0 :
GXB_NC : K2 : : : : QL0 :
VCCL_GXB : K3 : power : : 1.2V : :
GND : K4 : gnd : : : :
VCCINT : K5 : power : : 1.2V : :
GND : K6 : gnd : : : :
VCCINT : K7 : power : : 1.2V : :
GND : K8 : gnd : : : :
VCCINT : K9 : power : : 1.2V : :
GND : K10 : gnd : : : :
VCCINT : K11 : power : : 1.2V : :
GND : K12 : gnd : : : :
VCCINT : K13 : power : : 1.2V : :
VCCIO5 : K14 : power : : 2.5V : 5 :
wb_dat_i[20] : K15 : input : 2.5 V : : 5 : N
wb_adr_i[4] : K16 : input : 2.5 V : : 5 : N
GND+ : K17 : : : : 5 :
GND+ : K18 : : : : 5 :
GND : L1 : gnd : : : :
GND : L2 : gnd : : : :
VCCH_GXB : L3 : power : : 2.5V : :
VCCINT : L4 : power : : 1.2V : :
GND : L5 : gnd : : : :
VCCA : L6 : power : : 2.5V : :
GND : L7 : gnd : : : :
VCCINT : L8 : power : : 1.2V : :
GND : L9 : gnd : : : :
VCCINT : L10 : power : : 1.2V : :
GND : L11 : gnd : : : :
VCCINT : L12 : power : : 1.2V : :
VCCA : L13 : power : : 2.5V : :
GND : L14 : gnd : : : :
wb_dat_i[14] : L15 : input : 2.5 V : : 5 : N
wb_dat_i[21] : L16 : input : 2.5 V : : 5 : N
GND : L17 : gnd : : : :
wb_dat_o[29] : L18 : output : 2.5 V : : 5 : N
GXB_GND* : M1 : : : : QL0 :
GXB_GND* : M2 : : : : QL0 :
VCCL_GXB : M3 : power : : 1.2V : :
GND : M4 : gnd : : : :
VCCD_PLL : M5 : power : : 1.2V : :
GND : M6 : gnd : : : :
wb_dat_i[4] : M7 : input : 2.5 V : : 3 : N
GND : M8 : gnd : : : :
wb_rst_i : M9 : input : 2.5 V : : 3A : N
wb_clk_i : M10 : input : 2.5 V : : 3A : N
VCCINT : M11 : power : : 1.2V : :
GND : M12 : gnd : : : :
GND : M13 : gnd : : : :
VCCD_PLL : M14 : power : : 1.2V : :
VCCIO5 : M15 : power : : 2.5V : 5 :
wb_adr_i[3] : M16 : input : 2.5 V : : 5 : N
wb_adr_i[2] : M17 : input : 2.5 V : : 5 : N
wb_dat_o[26] : M18 : output : 2.5 V : : 5 : N
GND : N1 : gnd : : : :
GND : N2 : gnd : : : :
VCCA_GXB : N3 : power : : 2.5V : :
VCCINT : N4 : power : : 1.2V : :
RESERVED_INPUT_WITH_WEAK_PULLUP : N5 : : : : 3 :
RESERVED_INPUT_WITH_WEAK_PULLUP : N6 : : : : 3 :
wb_dat_o[31] : N7 : output : 2.5 V : : 3 : N
VCCIO3 : N8 : power : : 2.5V : 3 :
VCC_CLKIN3A : N9 : power : : 2.5V : 3A :
GND : N10 : gnd : : : :
VCCIO4 : N11 : power : : 2.5V : 4 :
VCCIO4 : N12 : power : : 2.5V : 4 :
VCCIO4 : N13 : power : : 2.5V : 4 :
VCCIO4 : N14 : power : : 2.5V : 4 :
wb_dat_i[17] : N15 : input : 2.5 V : : 5 : N
wb_dat_i[11] : N16 : input : 2.5 V : : 5 : N
wb_adr_i[5] : N17 : input : 2.5 V : : 5 : N
wb_dat_i[31] : N18 : input : 2.5 V : : 5 : N
GXB_NC : P1 : : : : QL0 :
GXB_NC : P2 : : : : QL0 :
GND : P3 : gnd : : : :
MSEL2 : P4 : : : : 3 :
GND : P5 : gnd : : : :
RESERVED_INPUT_WITH_WEAK_PULLUP : P6 : : : : 3 :
VCCIO3 : P7 : power : : 2.5V : 3 :
GND : P8 : gnd : : : :
VCCIO3 : P9 : power : : 2.5V : 3 :
wb_dat_i[22] : P10 : input : 2.5 V : : 3 : N
GND : P11 : gnd : : : :
wb_ack_o : P12 : output : 2.5 V : : 4 : N
wb_rty_o : P13 : output : 2.5 V : : 4 : N
GND : P14 : gnd : : : :
wb_dat_i[18] : P15 : input : 2.5 V : : 4 : N
wb_dat_o[28] : P16 : output : 2.5 V : : 5 : N
GND : P17 : gnd : : : :
wb_dat_i[13] : P18 : input : 2.5 V : : 5 : N
GND : R1 : gnd : : : :
GND : R2 : gnd : : : :
GND : R3 : gnd : : : :
VCCL_GXB : R4 : power : : 1.2V : :
MSEL1 : R5 : : : : 3 :
~ALTERA_NCEO~ / RESERVED_OUTPUT_OPEN_DRAIN : R6 : output : 2.5 V : : 3 : N
wb_dat_i[24] : R7 : input : 2.5 V : : 3 : N
wb_dat_o[22] : R8 : output : 2.5 V : : 3 : N
wb_dat_o[8] : R9 : output : 2.5 V : : 3 : N
wb_dat_i[0] : R10 : input : 2.5 V : : 3 : N
wb_dat_i[2] : R11 : input : 2.5 V : : 4 : N
wb_adr_i[0] : R12 : input : 2.5 V : : 4 : N
wb_dat_o[5] : R13 : output : 2.5 V : : 4 : N
wb_dat_i[12] : R14 : input : 2.5 V : : 4 : N
wb_cyc_i : R15 : input : 2.5 V : : 4 : N
wb_dat_o[7] : R16 : output : 2.5 V : : 5 : N
wb_dat_i[10] : R17 : input : 2.5 V : : 5 : N
wb_dat_o[30] : R18 : output : 2.5 V : : 5 : N
GXB_GND* : T1 : : : : QL0 :
GXB_GND* : T2 : : : : QL0 :
GND : T3 : gnd : : : :
VCCA_GXB : T4 : power : : 2.5V : :
MSEL0 : T5 : : : : 3 :
RESERVED_INPUT_WITH_WEAK_PULLUP : T6 : : : : 3 :
wb_dat_i[30] : T7 : input : 2.5 V : : 3 : N
wb_dat_o[21] : T8 : output : 2.5 V : : 3 : N
wb_dat_o[13] : T9 : output : 2.5 V : : 3 : N
wb_dat_o[0] : T10 : output : 2.5 V : : 3 : N
wb_dat_i[7] : T11 : input : 2.5 V : : 4 : N
wb_dat_i[3] : T12 : input : 2.5 V : : 4 : N
wb_dat_i[27] : T13 : input : 2.5 V : : 4 : N
wb_dat_i[29] : T14 : input : 2.5 V : : 4 : N
wb_err_o : T15 : output : 2.5 V : : 4 : N
wb_dat_i[15] : T16 : input : 2.5 V : : 4 : N
wb_adr_i[1] : T17 : input : 2.5 V : : 4 : N
wb_dat_i[19] : T18 : input : 2.5 V : : 5 : N
GND : U1 : gnd : : : :
GND : U2 : gnd : : : :
NC : U3 : : : : :
CONF_DONE : U4 : : : : 3 :
GND : U5 : gnd : : : :
RESERVED_INPUT_WITH_WEAK_PULLUP : U6 : : : : 3 :
wb_dat_o[20] : U7 : output : 2.5 V : : 3 : N
GND : U8 : gnd : : : :
wb_dat_o[12] : U9 : output : 2.5 V : : 3 : N
wb_dat_o[19] : U10 : output : 2.5 V : : 3 : N
GND : U11 : gnd : : : :
wb_dat_i[5] : U12 : input : 2.5 V : : 4 : N
wb_dat_o[1] : U13 : output : 2.5 V : : 4 : N
GND : U14 : gnd : : : :
wb_dat_i[9] : U15 : input : 2.5 V : : 4 : N
wb_dat_i[26] : U16 : input : 2.5 V : : 4 : N
GND : U17 : gnd : : : :
wb_dat_o[6] : U18 : output : 2.5 V : : 4 : N
RREF : V1 : : : : :
GND : V2 : gnd : : : :
NC : V3 : : : : :
nSTATUS : V4 : : : : 3 :
wb_dat_i[16] : V5 : input : 2.5 V : : 3 : N
wb_dat_i[25] : V6 : input : 2.5 V : : 3 : N
wb_dat_o[24] : V7 : output : 2.5 V : : 3 : N
wb_dat_o[23] : V8 : output : 2.5 V : : 3 : N
wb_dat_o[3] : V9 : output : 2.5 V : : 3 : N
wb_dat_i[23] : V10 : input : 2.5 V : : 3 : N
wb_cti_i[0] : V11 : input : 2.5 V : : 4 : N
wb_cti_i[1] : V12 : input : 2.5 V : : 4 : N
wb_dat_i[1] : V13 : input : 2.5 V : : 4 : N
wb_we_i : V14 : input : 2.5 V : : 4 : N
wb_dat_i[28] : V15 : input : 2.5 V : : 4 : N
wb_stb_i : V16 : input : 2.5 V : : 4 : N
wb_dat_i[8] : V17 : input : 2.5 V : : 4 : N
wb_dat_o[4] : V18 : output : 2.5 V : : 4 : N