URL
https://opencores.org/ocsvn/xgate/xgate/trunk
Subversion Repositories xgate
[/] [xgate/] [trunk/] [rtl/] [verilog/] [xgate_risc.v] - Rev 96
Go to most recent revision | Compare with Previous | Blame | View Log
//////////////////////////////////////////////////////////////////////////////// // // XGATE Coprocessor - XGATE RISC Processor Core // // Author: Bob Hayes // rehayes@opencores.org // // Downloaded from: http://www.opencores.org/projects/xgate..... // //////////////////////////////////////////////////////////////////////////////// // Copyright (c) 2009, Robert Hayes // // This source file is free software: you can redistribute it and/or modify // it under the terms of the GNU Lesser General Public License as published // by the Free Software Foundation, either version 3 of the License, or // (at your option) any later version. // // Supplemental terms. // * Redistributions of source code must retain the above copyright // notice, this list of conditions and the following disclaimer. // * Neither the name of the <organization> nor the // names of its contributors may be used to endorse or promote products // derived from this software without specific prior written permission. // // THIS SOFTWARE IS PROVIDED BY Robert Hayes ''AS IS'' AND ANY // EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED // WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE // DISCLAIMED. IN NO EVENT SHALL Robert Hayes BE LIABLE FOR ANY // DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES // (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; // LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND // ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS // SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. // // You should have received a copy of the GNU General Public License // along with this program. If not, see <http://www.gnu.org/licenses/>. //////////////////////////////////////////////////////////////////////////////// // 45678901234567890123456789012345678901234567890123456789012345678901234567890 module xgate_risc #(parameter MAX_CHANNEL = 127) // Max XGATE Interrupt Channel Number ( output reg [15:0] xgr1, output reg [15:0] xgr2, output reg [15:0] xgr3, output reg [15:0] xgr4, output reg [15:0] xgr5, output reg [15:0] xgr6, output reg [15:0] xgr7, output [15:0] xgate_address, output [15:0] write_mem_data, // Data for Memory write output mem_access, // output write_mem_strb_l, // Strobe for writing low data byte output write_mem_strb_h, // Strobe for writing high data bye output reg zero_flag, output reg negative_flag, output reg carry_flag, output reg overflow_flag, output reg [ 6:0] xgchid, output reg [127:1] xgif_status, // XGATE Interrupt Flag output xg_sw_irq, // Xgate Software interrupt output [ 7:0] host_semap, // Semaphore status for host output reg debug_active, // Latch to control debug mode in the RISC state machine output debug_ack, // Clear debug register output single_step, // Pulse to trigger a single instruction execution in debug mode input [15:0] read_mem_data, input [15:0] perif_data, input risc_clk, input async_rst_b, input mem_req_ack, // Memory Bus available - data good input ss_mem_ack, // WISHBONE Bus has granted single step memory access input xge, // XGATE Module Enable input debug_mode_i, // Force RISC core into debug mode input xgdbg_set, // Enter XGATE Debug Mode, pulse input xgdbg_clear, // Leave XGATE Debug Mode input xgss, // XGATE Single Step input [15:1] xgvbr, // XGATE vector Base Address Register input [ 6:0] int_req, // Encoded interrupt request input xgie, // XGATE Interrupt Enable input brk_irq_ena, // Enable BRK instruction to generate interrupt input write_xgchid, // Write Strobe for XGCHID register input write_xgsem, // Write Strobe for XGSEM register input write_xgccr, // Write Strobe for XGATE Condition Code Register input [ 1:0] write_xgpc, // Write Strobe for XGATE Program Counter input [ 1:0] write_xgr7, // Write Strobe for XGATE Data Register R7 input [ 1:0] write_xgr6, // Write Strobe for XGATE Data Register R6 input [ 1:0] write_xgr5, // Write Strobe for XGATE Data Register R5 input [ 1:0] write_xgr4, // Write Strobe for XGATE Data Register R4 input [ 1:0] write_xgr3, // Write Strobe for XGATE Data Register R3 input [ 1:0] write_xgr2, // Write Strobe for XGATE Data Register R2 input [ 1:0] write_xgr1, // Write Strobe for XGATE Data Register R1 input xgsweif_c, // Clear Software Flag input clear_xgif_7, // Strobe for decode to clear interrupt flag bank 7 input clear_xgif_6, // Strobe for decode to clear interrupt flag bank 6 input clear_xgif_5, // Strobe for decode to clear interrupt flag bank 5 input clear_xgif_4, // Strobe for decode to clear interrupt flag bank 4 input clear_xgif_3, // Strobe for decode to clear interrupt flag bank 3 input clear_xgif_2, // Strobe for decode to clear interrupt flag bank 2 input clear_xgif_1, // Strobe for decode to clear interrupt flag bank 1 input clear_xgif_0, // Strobe for decode to clear interrupt flag bank 0 input [15:0] clear_xgif_data // Data for decode to clear interrupt flag ); integer j; // Loop counters for decode of XGATE Interrupt Register integer k; // Loop counter for Bit Field Insert decode integer bfi, bfii; // Loop counter for Bit Field Insert function // State machine sequence parameter [3:0] //synopsys enum state_info IDLE = 4'b0000, // waiting for interrupt CONT = 4'b0001, // Instruction processing state, first state S_STALL = 4'b0010, // Simple Stall while updating PC after change of flow W_STORE = 4'b1101, // Stall while doing memory word write access W_LOAD = 4'b0011, // Stall while doing memory word read access B_LOAD = 4'b0100, // Stall while doing memory byte read access BREAK = 4'b0101, // Stop in this state after BRK instruction BREAK_2 = 4'b0110, // Advance PC after Single Step command LD_INST = 4'b0111, // Load Instruction in Debug mode DEBUG = 4'b1000, // Stop in this state while waiting for debug commands BOOT_1 = 4'b1001, // BOOT_2 = 4'b1010, // BOOT_3 = 4'b1011, // CHG_CHID = 4'b1100; // Semaphore states parameter [1:0] NO_LOCK = 2'b00, RISC_LOCK = 2'b10, HOST_LOCK = 2'b11; reg [ 3:0] cpu_state; // State register for instruction processing reg [ 3:0] next_cpu_state; // Pseudo Register, wire stm_auto_advance; // State Machine increment without wait state holdoff reg load_next_inst; // Pseudo Register, reg [15:0] program_counter; // Program Counter register wire [15:0] pc_sum; // Program Counter Adder reg [15:0] pc_incr_mux; // Pseudo Register, mux to select the Program Counter Increment value reg [15:0] next_pc; // Pseudo Register wire [15:0] jump_offset; // Address offset to be added to pc on conditional branch instruction wire [15:0] bra_offset; // Address offset to be added to pc on branch always instruction reg [15:0] alu_result; // Pseudo Register, reg [15:0] op_code; // Register for instruction being executed reg ena_rd_low_byte; // Pseudo Register, reg ena_rd_high_byte; // Pseudo Register, reg data_access; // Pseudo Register, RAM access in proccess reg data_write; // Pseudo Register, RAM access is write operation reg data_word_op; // Pseudo Register, RAM access operation is 16 bits(word) reg [15:0] data_address; // Pseudo Register, Address for RAM data read or write reg [15:0] load_data; // Data captured from WISHBONE Master bus for Load instructions reg [ 6:0] set_irq_flag; // Pseudo Register, pulse for setting irq output register reg next_zero; // Pseudo Register, reg next_negative; // Pseudo Register, reg next_carry; // Pseudo Register, reg next_overflow; // Pseudo Register, reg op_code_error; // Pseudo Register, reg software_error; // OP Code error, Address Error, BRK Error wire addr_error; // Decode Addressing error reg set_semaph; // Pseudo Register, reg clear_semaph; // Pseudo Register, reg [ 2:0] semaph_risc; // Pseudo Register, reg [ 7:0] semap_risc_bit; // Pseudo Register, wire [ 7:0] risc_semap; // Semaphore status bit for RISC wire semaph_stat; // Return Status of Semaphore bit reg [15:0] rd_data; // Pseudo Register, reg [15:0] rs1_data; // Pseudo Register, reg [15:0] rs2_data; // Pseudo Register, wire [ 2:0] wrt_reg_sel; reg sel_rd_field; // Pseudo Register, reg wrt_sel_xgr1; // Pseudo Register, reg wrt_sel_xgr2; // Pseudo Register, reg wrt_sel_xgr3; // Pseudo Register, reg wrt_sel_xgr4; // Pseudo Register, reg wrt_sel_xgr5; // Pseudo Register, reg wrt_sel_xgr6; // Pseudo Register, reg wrt_sel_xgr7; // Pseudo Register, reg [127:1] xgif_d; reg [15:0] shift_in; wire [15:0] shift_out; wire shift_rollover; reg shift_left; reg [ 4:0] shift_ammount; reg [15:0] shift_filler; reg [15:0] bf_mux_mask; // Mask for controlling mux's in Bit Field Insert Instructions wire start_thread; // Signal to pop RISC core out of IDLE State wire cpu_is_idle; // Processor is in the IDLE state wire perif_wrt_ena; // Enable for Salve writes to CPU registers reg xgss_edge; // Flop for edge detection reg brk_set_dbg; // Pulse to set debug_active from instruction decoder reg cmd_change_pc; // Debug write to PC register reg debug_edge; // Reg for edge detection reg cmd_dbg; reg [ 1:0] chid_sm_ns; // Pseudo Register for State Machine next state logic, reg [ 1:0] chid_sm; // wire chid_goto_idle; // // Debug states for change CHID parameter [1:0] CHID_IDLE = 2'b00, CHID_TEST = 2'b10, CHID_WAIT = 2'b11; assign jump_offset = {{6{op_code[8]}}, op_code[8:0], 1'b0}; assign bra_offset = {{5{op_code[9]}}, op_code[9:0], 1'b0}; assign pc_sum = program_counter + pc_incr_mux; assign xgate_address = data_access ? data_address : program_counter; //assign mem_access = data_access || load_next_inst || start_thread; assign mem_access = data_access || load_next_inst || (cpu_state == CONT) || (cpu_state == BREAK_2) || start_thread; // Generate an address for an op code fetch from an odd address or a word Load/Store from/to an odd address. assign addr_error = xgate_address[0] && (load_next_inst || (data_access && data_word_op)); assign write_mem_strb_l = data_access && data_write && (data_word_op || !data_address[0]); assign write_mem_strb_h = data_access && data_write && (data_word_op || data_address[0]); assign write_mem_data = (write_mem_strb_l || write_mem_strb_h) ? rd_data : 16'b0; assign start_thread = xge && (|int_req) && !debug_active; assign cpu_is_idle = (cpu_state == IDLE); assign perif_wrt_ena = (cpu_is_idle && ~xge) || debug_active; // Decode register select for RD and RS always @* begin case (op_code[10:8]) // synopsys parallel_case 3'b001 : rd_data = xgr1; 3'b010 : rd_data = xgr2; 3'b011 : rd_data = xgr3; 3'b100 : rd_data = xgr4; 3'b101 : rd_data = xgr5; 3'b110 : rd_data = xgr6; 3'b111 : rd_data = xgr7; default : rd_data = 16'h0; // XGR0 is always Zero endcase end assign wrt_reg_sel = (cpu_state == BOOT_3) ? 3'b001 : (sel_rd_field ? op_code[10:8] : op_code[4:2]); // Decode register write select for eather RD or RI/RS2 always @* begin wrt_sel_xgr1 = (wrt_reg_sel == 3'b001) && mem_req_ack; wrt_sel_xgr2 = (wrt_reg_sel == 3'b010) && mem_req_ack; wrt_sel_xgr3 = (wrt_reg_sel == 3'b011) && mem_req_ack; wrt_sel_xgr4 = (wrt_reg_sel == 3'b100) && mem_req_ack; wrt_sel_xgr5 = (wrt_reg_sel == 3'b101) && mem_req_ack; wrt_sel_xgr6 = (wrt_reg_sel == 3'b110) && mem_req_ack; wrt_sel_xgr7 = (wrt_reg_sel == 3'b111) && mem_req_ack; end // Decode register select for RS1 and RB always @* case (op_code[7:5]) // synopsys parallel_case 3'b001 : rs1_data = xgr1; 3'b010 : rs1_data = xgr2; 3'b011 : rs1_data = xgr3; 3'b100 : rs1_data = xgr4; 3'b101 : rs1_data = xgr5; 3'b110 : rs1_data = xgr6; 3'b111 : rs1_data = xgr7; default : rs1_data = 16'h0; // XGR0 is always Zero endcase // Decode register select for RS2 and RI always @* case (op_code[4:2]) // synopsys parallel_case 3'b001 : rs2_data = xgr1; 3'b010 : rs2_data = xgr2; 3'b011 : rs2_data = xgr3; 3'b100 : rs2_data = xgr4; 3'b101 : rs2_data = xgr5; 3'b110 : rs2_data = xgr6; 3'b111 : rs2_data = xgr7; default : rs2_data = 16'h0; // XGR0 is always Zero endcase // Decode mux select mask for Bit Field Insert Instructions always @* begin k = 0; while (k < 16) begin bf_mux_mask[k] = 1'b0; if ((k >= rs2_data[3:0]) && (k <= rs2_data[3:0] + rs2_data[7:4])) bf_mux_mask[k] = 1'b1; k = k + 1; end end // Software Error Interrupt Latch always @(posedge risc_clk or negedge async_rst_b) if ( !async_rst_b ) software_error <= 1'b0; else software_error <= addr_error || op_code_error || (brk_set_dbg && brk_irq_ena) || (software_error && !xgsweif_c); assign xg_sw_irq = software_error && xgie; // Latch the need to go to debug state set by xgdb always @(posedge risc_clk or negedge async_rst_b) if ( !async_rst_b ) begin cmd_dbg <= 1'b0; end else begin cmd_dbg <= !((cpu_state == LD_INST) || (cpu_state == DEBUG)) && (cmd_dbg || (xgdbg_set && mem_req_ack && (next_cpu_state == CONT))); end // Latch the debug state, set by eather xgdb or BRK instructions always @(posedge risc_clk or negedge async_rst_b) if ( !async_rst_b ) begin debug_active <= 1'b0; debug_edge <= 0; end else begin debug_active <= !xgdbg_clear && (cmd_dbg || brk_set_dbg || op_code_error || debug_active); debug_edge <= debug_active; end assign debug_ack = debug_active && !debug_edge; // Posedge of debug_active // Convert xgss (Single Step Pulse) to a one risc_clk wide pulse always @(posedge risc_clk or negedge async_rst_b) if ( !async_rst_b ) xgss_edge <= 1'b0; else xgss_edge <= xgss; assign single_step = (xgss && !xgss_edge) || (!debug_active && debug_edge); assign stm_auto_advance = (chid_sm != CHID_IDLE); // CPU State Register always @(posedge risc_clk or negedge async_rst_b) if ( !async_rst_b ) cpu_state <= IDLE; else cpu_state <= (mem_req_ack || stm_auto_advance) ? next_cpu_state : cpu_state; // CPU Instruction Register always @(posedge risc_clk or negedge async_rst_b) if ( !async_rst_b ) op_code <= 16'h0000; else op_code <= (load_next_inst && mem_req_ack) ? read_mem_data : op_code; // Active Channel Latch always @(posedge risc_clk or negedge async_rst_b) if ( !async_rst_b ) xgchid <= 7'b0; else xgchid <= (write_xgchid && debug_active) ? perif_data[6:0] : (cpu_is_idle ? int_req : xgchid); // Channel Change Debug state machine register always @(posedge risc_clk or negedge async_rst_b) if ( !async_rst_b ) chid_sm <= CHID_IDLE; else chid_sm <= chid_sm_ns; // Channel Change Debug next state always @* case (chid_sm) // synopsys parallel_case CHID_IDLE: if ( write_xgchid && debug_active ) chid_sm_ns = CHID_TEST; else chid_sm_ns = CHID_IDLE; CHID_TEST: if ( !((cpu_state == IDLE) || (cpu_state == CHG_CHID)) && (|xgchid) ) chid_sm_ns = CHID_IDLE; else chid_sm_ns = CHID_WAIT; CHID_WAIT: if ( (cpu_state == IDLE) || (cpu_state == CHG_CHID) ) chid_sm_ns = CHID_IDLE; else chid_sm_ns = CHID_WAIT; default : chid_sm_ns = CHID_IDLE; endcase assign chid_goto_idle = (chid_sm == CHID_WAIT); // CPU Read Data Buffer Register always @(posedge risc_clk or negedge async_rst_b) if ( !async_rst_b ) load_data <= 16'h0000; else load_data <= (data_access && !data_write && mem_req_ack) ? read_mem_data : load_data; // Program Counter Register always @(posedge risc_clk or negedge async_rst_b) if ( !async_rst_b ) program_counter <= 16'h0000; else program_counter <= (|write_xgpc && perif_wrt_ena) ? {(write_xgpc[1] ? perif_data[15:8]: program_counter[15:8]), (write_xgpc[0] ? perif_data[ 7:0]: program_counter[ 7:0])} : (mem_req_ack ? next_pc : program_counter); // Debug Change Program Counter Register always @(posedge risc_clk or negedge async_rst_b) if ( !async_rst_b ) cmd_change_pc <= 1'b0; else cmd_change_pc <= (|write_xgpc && perif_wrt_ena) || (cmd_change_pc && !mem_req_ack); // ALU Flag Bits always @(posedge risc_clk or negedge async_rst_b) if ( !async_rst_b ) begin carry_flag <= 1'b0; overflow_flag <= 1'b0; zero_flag <= 1'b0; negative_flag <= 1'b0; end else begin carry_flag <= (write_xgccr && perif_wrt_ena) ? perif_data[0] : (mem_req_ack ? next_carry : carry_flag); overflow_flag <= (write_xgccr && perif_wrt_ena) ? perif_data[1] : (mem_req_ack ? next_overflow : overflow_flag); zero_flag <= (write_xgccr && perif_wrt_ena) ? perif_data[2] : (mem_req_ack ? next_zero : zero_flag); negative_flag <= (write_xgccr && perif_wrt_ena) ? perif_data[3] : (mem_req_ack ? next_negative : negative_flag); end // Interrupt Flag next value always @* begin xgif_d = 0; j = 1; while (j <= MAX_CHANNEL) // while loop sets irq bit and maintains previously set bits begin xgif_d[j] = xgif_status[j] || (set_irq_flag == j); j = j + 1; end if (clear_xgif_0) xgif_d[15: 1] = ~clear_xgif_data & xgif_status[15: 1]; if (clear_xgif_1) xgif_d[31:16] = ~clear_xgif_data & xgif_status[31:16]; if (clear_xgif_2) xgif_d[47:32] = ~clear_xgif_data & xgif_status[47:32]; if (clear_xgif_3) xgif_d[63:48] = ~clear_xgif_data & xgif_status[63:48]; if (clear_xgif_4) xgif_d[79:64] = ~clear_xgif_data & xgif_status[79:64]; if (clear_xgif_5) xgif_d[95:80] = ~clear_xgif_data & xgif_status[95:80]; if (clear_xgif_6) xgif_d[111:96] = ~clear_xgif_data & xgif_status[111:96]; if (clear_xgif_7) xgif_d[127:112] = ~clear_xgif_data & xgif_status[127:112]; end // Interrupt Flag Registers always @(posedge risc_clk or negedge async_rst_b) if ( !async_rst_b ) xgif_status <= 0; else xgif_status <= xgif_d; // RISC Data Registers always @(posedge risc_clk or negedge async_rst_b) if ( !async_rst_b ) begin xgr1 <= 16'b0; xgr2 <= 16'b0; xgr3 <= 16'b0; xgr4 <= 16'b0; xgr5 <= 16'b0; xgr6 <= 16'b0; xgr7 <= 16'b0; end else begin xgr1 <= (|write_xgr1 && perif_wrt_ena) ? {(write_xgr1[1] ? perif_data[15:8]: xgr1[15:8]), (write_xgr1[0] ? perif_data[ 7:0]: xgr1[ 7:0])} : {((wrt_sel_xgr1 && ena_rd_high_byte) ? alu_result[15:8] : xgr1[15:8]), ((wrt_sel_xgr1 && ena_rd_low_byte) ? alu_result[ 7:0] : xgr1[ 7:0])}; xgr2 <= (|write_xgr2 && perif_wrt_ena) ? {(write_xgr2[1] ? perif_data[15:8]: xgr2[15:8]), (write_xgr2[0] ? perif_data[ 7:0]: xgr2[ 7:0])} : {((wrt_sel_xgr2 && ena_rd_high_byte) ? alu_result[15:8] : xgr2[15:8]), ((wrt_sel_xgr2 && ena_rd_low_byte) ? alu_result[ 7:0] : xgr2[ 7:0])}; xgr3 <= (|write_xgr3 && perif_wrt_ena) ? {(write_xgr3[1] ? perif_data[15:8]: xgr3[15:8]), (write_xgr3[0] ? perif_data[ 7:0]: xgr3[ 7:0])} : {((wrt_sel_xgr3 && ena_rd_high_byte) ? alu_result[15:8] : xgr3[15:8]), ((wrt_sel_xgr3 && ena_rd_low_byte) ? alu_result[ 7:0] : xgr3[ 7:0])}; xgr4 <= (|write_xgr4 && perif_wrt_ena) ? {(write_xgr4[1] ? perif_data[15:8]: xgr4[15:8]), (write_xgr4[0] ? perif_data[ 7:0]: xgr4[ 7:0])} : {((wrt_sel_xgr4 && ena_rd_high_byte) ? alu_result[15:8] : xgr4[15:8]), ((wrt_sel_xgr4 && ena_rd_low_byte) ? alu_result[ 7:0] : xgr4[ 7:0])}; xgr5 <= (|write_xgr5 && perif_wrt_ena) ? {(write_xgr5[1] ? perif_data[15:8]: xgr5[15:8]), (write_xgr5[0] ? perif_data[ 7:0]: xgr5[ 7:0])} : {((wrt_sel_xgr5 && ena_rd_high_byte) ? alu_result[15:8] : xgr5[15:8]), ((wrt_sel_xgr5 && ena_rd_low_byte) ? alu_result[ 7:0] : xgr5[ 7:0])}; xgr6 <= (|write_xgr6 && perif_wrt_ena) ? {(write_xgr6[1] ? perif_data[15:8]: xgr6[15:8]), (write_xgr6[0] ? perif_data[ 7:0]: xgr6[ 7:0])} : {((wrt_sel_xgr6 && ena_rd_high_byte) ? alu_result[15:8] : xgr6[15:8]), ((wrt_sel_xgr6 && ena_rd_low_byte) ? alu_result[ 7:0] : xgr6[ 7:0])}; xgr7 <= (|write_xgr7 && perif_wrt_ena) ? {(write_xgr7[1] ? perif_data[15:8]: xgr7[15:8]), (write_xgr7[0] ? perif_data[ 7:0]: xgr7[ 7:0])} : {((wrt_sel_xgr7 && ena_rd_high_byte) ? alu_result[15:8] : xgr7[15:8]), ((wrt_sel_xgr7 && ena_rd_low_byte) ? alu_result[ 7:0] : xgr7[ 7:0])}; end // V - Vector fetch: always an aligned word read, lasts for at least one RISC core cycle // P - Program word fetch: always an aligned word read, lasts for at least one RISC core cycle // r - 8-bit data read: lasts for at least one RISC core cycle // R - 16-bit data read: lasts for at least one RISC core cycle // w - 8-bit data write: lasts for at least one RISC core cycle // W - 16-bit data write: lasts for at least one RISC core cycle // A - Alignment cycle: no read or write, lasts for zero or one RISC core cycles // f - Free cycle: no read or write, lasts for one RISC core cycles // Special Cases // PP/P - Branch: PP if branch taken, P if not taken always @* begin ena_rd_low_byte = 1'b0; ena_rd_high_byte = 1'b0; next_cpu_state = (debug_active || cmd_dbg) ? LD_INST : CONT; load_next_inst = 1'b1; pc_incr_mux = cmd_dbg ? 16'h0000: 16'h0002; // Verilog Instruction order dependent next_pc = pc_sum; // "" next_zero = zero_flag; next_negative = negative_flag; next_carry = carry_flag; next_overflow = overflow_flag; brk_set_dbg = 1'b0; op_code_error = 1'b0; alu_result = 16'h0000; sel_rd_field = 1'b1; data_access = 1'b0; data_word_op = 1'b0; data_write = 1'b0; data_address = 16'h0000; shift_left = 1'b0; shift_ammount = 5'b0_0000; shift_filler = 16'h0000; shift_in = rd_data; set_irq_flag = 7'b0; set_semaph = 1'b0; clear_semaph = 1'b0; semaph_risc = 3'b0; casez ({cpu_state, op_code}) {IDLE, 16'b????????????????} : begin next_cpu_state = start_thread ? BOOT_1 : IDLE; pc_incr_mux = 16'h0000; next_pc = pc_sum; load_next_inst = 1'b0; end {CHG_CHID, 16'b????????????????} : begin if (!xge) next_cpu_state = IDLE; else if (ss_mem_ack || !debug_active) next_cpu_state = BOOT_1; else next_cpu_state = CHG_CHID; pc_incr_mux = 16'h0000; next_pc = pc_sum; load_next_inst = 1'b0; end // Output RAM address for Program Counter {BOOT_1, 16'b????????????????} : begin next_cpu_state = BOOT_2; pc_incr_mux = 16'h0000; next_pc = pc_sum; load_next_inst = 1'b0; data_access = 1'b1; data_word_op = 1'b1; data_address = {xgvbr, 1'b0} + {7'b0, xgchid, 2'b0}; end // Load PC value from data buffer register // Output RAM address for initial variable pointer {BOOT_2, 16'b????????????????} : begin next_cpu_state = BOOT_3; next_pc = load_data; load_next_inst = 1'b0; data_access = 1'b1; data_word_op = 1'b1; data_address = {xgvbr, 1'b0} + {7'b0, xgchid, 2'b0} + 2; end // Load R1 with initial variable pointer from data buffer register // Load first instruction to op_code register // Increment Program Counter {BOOT_3, 16'b????????????????} : begin next_cpu_state = CONT; ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; alu_result = load_data; end {BREAK, 16'b????????????????} : begin if (!xge) next_cpu_state = IDLE; else if (ss_mem_ack || !debug_active) next_cpu_state = BREAK_2; else if (chid_goto_idle) next_cpu_state = CHG_CHID; else next_cpu_state = BREAK; load_next_inst = 1'b0; pc_incr_mux = 16'h0000; next_pc = pc_sum; end {BREAK_2, 16'b????????????????} : begin next_cpu_state = LD_INST; load_next_inst = 1'b0; end {LD_INST, 16'b????????????????} : begin next_cpu_state = DEBUG; pc_incr_mux = 16'h0000; next_pc = pc_sum; end {DEBUG, 16'b????????????????} : begin if (!xge) next_cpu_state = IDLE; else if (ss_mem_ack || !debug_active) next_cpu_state = CONT; else if (cmd_change_pc) next_cpu_state = LD_INST; else if (chid_goto_idle) next_cpu_state = CHG_CHID; else next_cpu_state = DEBUG; load_next_inst = cmd_change_pc; pc_incr_mux = 16'h0000; next_pc = pc_sum; end // Pause here for program counter change of flow or memory write access // Load next instruction and increment PC // Default next_cpu_state is CONT {S_STALL, 16'b????????????????} : begin end // Pause here for memory read word access // Load next instruction and increment PC {W_LOAD, 16'b????????????????} : begin alu_result = load_data; ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; end // Pause here for memory read byte access // Load next instruction and increment PC {B_LOAD, 16'b????????????????} : begin alu_result = {8'h00, load_data[15:8]}; ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; end // ----------------------------------------------------------------------- // Instruction Group -- Return to Scheduler and Others // ----------------------------------------------------------------------- // Instruction = BRK, Op Code = 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 // Cycles - PAff {CONT, 16'b0000000000000000} : begin next_cpu_state = BREAK; pc_incr_mux = 16'hfffe; // equals -2 next_pc = pc_sum; load_next_inst = 1'b0; brk_set_dbg = 1'b1; end // Instruction = NOP, Op Code = 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 {CONT, 16'b0000000100000000} : begin end // Instruction = RTS, Op Code = 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 // Cycles - PA {CONT, 16'b0000001000000000} : begin next_cpu_state = IDLE; pc_incr_mux = 16'h0000; next_pc = pc_sum; load_next_inst = 1'b0; end // Instruction = SIF, Op Code = 0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 0 // Sets the Interrupt Flag of the current channel (XGCHID) will be set. // Cycles - PA {CONT, 16'b0000001100000000} : begin set_irq_flag = xgchid; end // ----------------------------------------------------------------------- // Instruction Group -- Semaphore Instructions // ----------------------------------------------------------------------- // Instruction = CSEM IMM3, Op Code = 0 0 0 0 0 IMM3 1 1 1 1 0 0 0 0 // Unlocks a semaphore that was locked by the RISC core. // Cycles - PA {CONT, 16'b00000???11110000} : begin clear_semaph = 1'b1; semaph_risc = op_code[10:8]; end // Instruction = CSEM RS, Op Code = 0 0 0 0 0 RS 1 1 1 1 0 0 0 1 // Unlocks a semaphore that was locked by the RISC core. // In monadic address mode, bits RS[2:0] select the semaphore to be cleared. // Cycles - PA {CONT, 16'b00000???11110001} : begin clear_semaph = 1'b1; semaph_risc = rd_data[2:0]; end // Instruction = SSEM IMM3, Op Code = 0 0 0 0 0 IMM3 1 1 1 1 0 0 1 0 // Attempts to set a semaphore. The state of the semaphore will be stored in the Carry-Flag: // 1 = Semaphore is locked by the RISC core // 0 = Semaphore is locked by the S12X_CPU // Cycles - PA {CONT, 16'b00000???11110010} : begin set_semaph = 1'b1; semaph_risc = op_code[10:8]; next_carry = semaph_stat; end // Instruction = SSEM RS, Op Code = 0 0 0 0 0 RS 1 1 1 1 0 0 1 1 // Attempts to set a semaphore. The state of the semaphore will be stored in the Carry-Flag: // 1 = Semaphore is locked by the RISC core // 0 = Semaphore is locked by the S12X_CPU // In monadic address mode, bits RS[2:0] select the semaphore to be set. // Cycles - PA {CONT, 16'b00000???11110011} : begin set_semaph = 1'b1; semaph_risc = rd_data[2:0]; next_carry = semaph_stat; end // ----------------------------------------------------------------------- // Instruction Group -- Single Register Instructions // ----------------------------------------------------------------------- // Instruction = SEX RD, Op Code = 0 0 0 0 0 RD 1 1 1 1 0 1 0 0 // SEX - Sign Extend Byte to Word // Cycles - P {CONT, 16'b00000???11110100} : begin ena_rd_high_byte = 1'b1; alu_result = {{8{rd_data[7]}}, rd_data[7:0]}; next_zero = !(|alu_result); next_negative = alu_result[15]; next_overflow = 1'b0; end // Instruction = PAR RD, Op Code = 0 0 0 0 0 RD 1 1 1 1 0 1 0 1 // PAR - Calculate Parity // Set Carry Flag on odd number of bits // Cycles - P {CONT, 16'b00000???11110101} : begin next_zero = !(|rd_data); next_negative = 1'b0; next_carry = ^rd_data; next_overflow = 1'b0; end // Instruction = JAL RD, Op Code = 0 0 0 0 0 RD 1 1 1 1 0 1 1 0 // Jump And Link // PC + $0002 => RD; RD => PC // Jumps to the address stored in RD and saves the return address in RD. // Cycles - PP {CONT, 16'b00000???11110110} : begin next_cpu_state = S_STALL; load_next_inst = 1'b0; ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; alu_result = program_counter; next_pc = rd_data; end // Instruction = SIF RS, Op Code = 0 0 0 0 0 RS 1 1 1 1 0 1 1 1 // Sets the Interrupt Flag associated with the channel id number // contained in RS[6:0] is set. The content of RS[15:7] is ignored // Cycles - P {CONT, 16'b00000???11110111} : set_irq_flag = rd_data[6:0]; // ----------------------------------------------------------------------- // Instruction Group -- Special Move instructions // ----------------------------------------------------------------------- // Instruction = TFR RD,CCR, Op Code = 0 0 0 0 0 RD 1 1 1 1 1 0 0 0 // Transfer from and to Special Registers // TFR RD,CCR: CCR => RD[3:0], 0 => RD[15:4] // Cycles - P {CONT, 16'b00000???11111000} : begin ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; alu_result = {12'b0, negative_flag, zero_flag, overflow_flag, carry_flag}; end // Instruction = TFR CCR,RS, Op Code = 0 0 0 0 0 RS 1 1 1 1 1 0 0 1 // Transfer from and to Special Registers // TFR CCR,RD: RD[3:0] => CCR // Cycles - P {CONT, 16'b00000???11111001} : begin next_negative = rd_data[3]; next_zero = rd_data[2]; next_overflow = rd_data[1]; next_carry = rd_data[0]; end // Instruction = TFR RD,PC, Op Code = 0 0 0 0 0 RD 1 1 1 1 1 0 1 0 // Transfer from and to Special Registers // TFR RD,PC: PC+4 => RD // Cycles - P {CONT, 16'b00000???11111010} : begin ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; alu_result = next_pc; end // ----------------------------------------------------------------------- // Instruction Group -- Shift instructions Dyadic // ----------------------------------------------------------------------- // Instruction = BFFO RD, RS, Op Code = 0 0 0 0 1 RD RS 1 0 0 0 0 // BFFO - Bit Field Find First One // FirstOne (RS) => RD // Cycles - P {CONT, 16'b00001??????10000} : begin ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; casez (rs1_data) // synopsys parallel_case 16'b1???_????_????_???? : alu_result = 16'h000f; 16'b01??_????_????_???? : alu_result = 16'h000e; 16'b001?_????_????_???? : alu_result = 16'h000d; 16'b0001_????_????_???? : alu_result = 16'h000c; 16'b0000_1???_????_???? : alu_result = 16'h000b; 16'b0000_01??_????_???? : alu_result = 16'h000a; 16'b0000_001?_????_???? : alu_result = 16'h0009; 16'b0000_0001_????_???? : alu_result = 16'h0008; 16'b0000_0000_1???_???? : alu_result = 16'h0007; 16'b0000_0000_01??_???? : alu_result = 16'h0006; 16'b0000_0000_001?_???? : alu_result = 16'h0005; 16'b0000_0000_0001_???? : alu_result = 16'h0004; 16'b0000_0000_0000_1??? : alu_result = 16'h0003; 16'b0000_0000_0000_01?? : alu_result = 16'h0002; 16'b0000_0000_0000_001? : alu_result = 16'h0001; 16'b0000_0000_0000_0001 : alu_result = 16'h0000; endcase next_zero = !(|alu_result); next_negative = 1'b0; next_carry = !(|rs1_data); next_overflow = 1'b0; end // Instruction = ASR RD, RS, Op Code = 0 0 0 0 1 RD RS 1 0 0 0 1 // ASR - Arithmetic Shift Right // n = RS // Cycles - P {CONT, 16'b00001??????10001} : begin shift_ammount = {|rs1_data[15:4], rs1_data[3:0]}; shift_filler = {16{rd_data[15]}}; ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; alu_result = shift_out; next_zero = !(|alu_result); next_negative = alu_result[15]; next_carry = |rs1_data ? shift_rollover : carry_flag; next_overflow = rd_data[15] ^ alu_result[15]; // Table and text disagree end // Instruction = CSL RD, RS, Op Code = 0 0 0 0 1 RD RS 1 0 0 1 0 // CSL - Logical Shift Left with Carry // n = RS // Cycles - P {CONT, 16'b00001??????10010} : begin shift_left = 1'b1; shift_ammount = {|rs1_data[15:4], rs1_data[3:0]}; shift_filler = {16{carry_flag}}; ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; alu_result = shift_out; next_zero = !(|alu_result); next_negative = alu_result[15]; next_carry = |rs1_data ? shift_rollover : carry_flag; next_overflow = rd_data[15] ^ alu_result[15]; end // Instruction = CSR RD, RS, Op Code = 0 0 0 0 1 RD RS 1 0 0 1 1 // Logical Shift Right with Carry // n = RS // Cycles - P {CONT, 16'b00001??????10011} : begin shift_ammount = {|rs1_data[15:4], rs1_data[3:0]}; shift_filler = {16{carry_flag}}; ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; alu_result = shift_out; next_zero = !(|alu_result); next_negative = alu_result[15]; next_carry = |rs1_data ? shift_rollover : carry_flag; next_overflow = rd_data[15] ^ alu_result[15]; end // Instruction = LSL RD, RS, Op Code = 0 0 0 0 1 RD RS 1 0 1 0 0 // Logical Shift Left // n = RS // Cycles - P {CONT, 16'b00001??????10100} : begin shift_left = 1'b1; shift_ammount = {|rs1_data[15:4], rs1_data[3:0]}; shift_filler = 16'h0000; ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; alu_result = shift_out; next_zero = !(|alu_result); next_negative = alu_result[15]; next_carry = |rs1_data ? shift_rollover : carry_flag; next_overflow = rd_data[15] ^ alu_result[15]; end // Instruction = LSR RD, RS, Op Code = 0 0 0 0 1 RD RS 1 0 1 0 1 // Logical Shift Right // n = RS // Cycles - P {CONT, 16'b00001??????10101} : begin shift_ammount = {|rs1_data[15:4], rs1_data[3:0]}; shift_filler = 16'h0000; ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; alu_result = shift_out; next_zero = !(|alu_result); next_negative = alu_result[15]; next_carry = |rs1_data ? shift_rollover : carry_flag; next_overflow = rd_data[15] ^ alu_result[15]; end // Instruction = ROL RD, RS, Op Code = 0 0 0 0 1 RD RS 1 0 1 1 0 // Rotate Left // n = RS // Cycles - P {CONT, 16'b00001??????10110} : begin shift_left = 1'b1; shift_ammount = {1'b0, rs1_data[3:0]}; shift_filler = rd_data; ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; alu_result = shift_out; next_zero = !(|alu_result); next_negative = alu_result[15]; next_overflow = 1'b0; end // Instruction = ROR RD, RS, Op Code = 0 0 0 0 1 RD RS 1 0 1 1 1 // Rotate Right // n = RS // Cycles - P {CONT, 16'b00001??????10111} : begin shift_ammount = {1'b0, rs1_data[3:0]}; shift_filler = rd_data; ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; alu_result = shift_out; next_zero = !(|alu_result); next_negative = alu_result[15]; next_overflow = 1'b0; end // ----------------------------------------------------------------------- // Instruction Group -- Shift instructions immediate // ----------------------------------------------------------------------- // Instruction = ASR RD, #IMM4, Op Code = 0 0 0 0 1 RD IMM4 1 0 0 1 // ASR - Arithmetic Shift Right // n = IMM4 // Cycles - P {CONT, 16'b00001???????1001} : begin shift_ammount = {!(|op_code[7:4]), op_code[7:4]}; shift_filler = {16{rd_data[15]}}; ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; alu_result = shift_out; next_zero = !(|alu_result); next_negative = alu_result[15]; next_carry = shift_rollover; next_overflow = rd_data[15] ^ alu_result[15]; // Table and text disagree end // Instruction = CSL RD, #IMM4, Op Code = 0 0 0 0 1 RD IMM4 1 0 1 0 // CSL - Logical Shift Left with Carry // n = IMM4 // Cycles - P {CONT, 16'b00001???????1010} : begin shift_left = 1'b1; shift_ammount = {!(|op_code[7:4]), op_code[7:4]}; shift_filler = {16{carry_flag}}; ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; alu_result = shift_out; next_zero = !(|alu_result); next_negative = alu_result[15]; next_carry = shift_rollover; next_overflow = rd_data[15] ^ alu_result[15]; end // Instruction = CSR RD, #IMM4, Op Code = 0 0 0 0 1 RD IMM4 1 0 1 1 // CSR - Logical Shift Right with Carry // n = IMM4 // Cycles - P {CONT, 16'b00001???????1011} : begin shift_ammount = {!(|op_code[7:4]), op_code[7:4]}; shift_filler = {16{carry_flag}}; ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; alu_result = shift_out; next_zero = !(|alu_result); next_negative = alu_result[15]; next_carry = shift_rollover; next_overflow = rd_data[15] ^ alu_result[15]; end // Instruction = LSL RD, #IMM4, Op Code = 0 0 0 0 1 RD IMM4 1 1 0 0 // LSL - Logical Shift Left // n = IMM4 // Cycles - P {CONT, 16'b00001???????1100} : begin shift_left = 1'b1; shift_ammount = {!(|op_code[7:4]), op_code[7:4]}; shift_filler = 16'h0000; ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; alu_result = shift_out; next_zero = !(|alu_result); next_negative = alu_result[15]; next_carry = shift_rollover; next_overflow = rd_data[15] ^ alu_result[15]; end // Instruction = LSR RD, #IMM4, Op Code = 0 0 0 0 1 RD IMM4 1 1 0 1 // LSR - Logical Shift Right // n = IMM4 // Cycles - P {CONT, 16'b00001???????1101} : begin shift_ammount = {!(|op_code[7:4]), op_code[7:4]}; shift_filler = 16'h0000; ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; alu_result = shift_out; next_zero = !(|alu_result); next_negative = alu_result[15]; next_carry = shift_rollover; next_overflow = rd_data[15] ^ alu_result[15]; end // Instruction = ROL RD, #IMM4, Op Code = 0 0 0 0 1 RD IMM4 1 1 1 0 // ROL - Rotate Left // n = IMM4 // Cycles - P {CONT, 16'b00001???????1110} : begin shift_left = 1'b1; shift_ammount = {1'b0, op_code[7:4]}; shift_filler = rd_data; ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; alu_result = shift_out; next_zero = !(|alu_result); next_negative = alu_result[15]; next_overflow = 1'b0; end // Instruction = ROR RD, #IMM4, Op Code = 0 0 0 0 1 RD IMM4 1 1 1 1 // ROR - Rotate Right // n = IMM4 // Cycles - P {CONT, 16'b00001???????1111} : begin shift_ammount = {1'b0, op_code[7:4]}; shift_filler = rd_data; ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; alu_result = shift_out; next_zero = !(|alu_result); next_negative = alu_result[15]; next_overflow = 1'b0; end // ----------------------------------------------------------------------- // Instruction Group -- Logical Triadic // ----------------------------------------------------------------------- // Instruction = AND RD, RS1, RS2, Op Code = 0 0 0 1 0 RD RS1 RS2 0 0 // AND - Logical AND // RS1 & RS2 => RD // Cycles - P {CONT, 16'b00010?????????00} : begin ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; alu_result = rs1_data & rs2_data; next_zero = !(|alu_result); next_negative = alu_result[15]; next_overflow = 1'b0; end // Instruction = OR RD, RS1, RS2, Op Code = 0 0 0 1 0 RD RS1 RS2 1 0 // OR - Logical OR // RS1 | RS2 => RD // Cycles - P {CONT, 16'b00010?????????10} : begin ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; alu_result = rs1_data | rs2_data; next_zero = !(|alu_result); next_negative = alu_result[15]; next_overflow = 1'b0; end // Instruction = XNOR RD, RS1, RS2, Op Code = 0 0 0 1 0 RD RS1 RS2 1 1 // XNOR - Logical Exclusive NOR // ~(RS1 ^ RS2) => RD // Cycles - P {CONT, 16'b00010?????????11} : begin ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; alu_result = ~(rs1_data ^ rs2_data); next_zero = !(|alu_result); next_negative = alu_result[15]; next_overflow = 1'b0; end // ----------------------------------------------------------------------- // Instruction Group -- Arithmetic Triadic // ----------------------------------------------------------------------- // Instruction = SUB RD, RS1, RS2, Op Code = 0 0 0 1 1 RD RS1 RS2 0 0 // SUB - Subtract without Carry // RS1 - RS2 => RD // Cycles - P {CONT, 16'b00011?????????00} : begin ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; {next_carry, alu_result} = rs1_data - rs2_data; next_zero = !(|alu_result); next_negative = alu_result[15]; next_overflow = (rs1_data[15] && !rs2_data[15] && !alu_result[15]) || (!rs1_data[15] && rs2_data[15] && alu_result[15]); end // Instruction = SBC RD, RS1, RS2, Op Code = 0 0 0 1 1 RD RS1 RS2 0 1 // SBC - Subtract with Carry // RS1 - RS2 - C => RD // Cycles - P {CONT, 16'b00011?????????01} : begin ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; {next_carry, alu_result} = rs1_data - rs2_data - {15'b0, carry_flag}; next_zero = !(|alu_result) && zero_flag; next_negative = alu_result[15]; next_overflow = (rs1_data[15] && !rs2_data[15] && !alu_result[15]) || (!rs1_data[15] && rs2_data[15] && alu_result[15]); end // Instruction = ADD RD, RS1, RS2, Op Code = 0 0 0 1 1 RD RS1 RS2 1 0 // ADD - ADD without carry // RS1 + RS2 => RD // Cycles - P {CONT, 16'b00011?????????10} : begin ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; {next_carry, alu_result} = rs1_data + rs2_data; next_zero = !(|alu_result); next_negative = alu_result[15]; next_overflow = (rs1_data[15] && rs2_data[15] && !alu_result[15]) || (!rs1_data[15] && !rs2_data[15] && alu_result[15]); end // Instruction = ADC RD, RS1, RS2, Op Code = 0 0 0 1 1 RD RS1 RS2 1 1 // ADC - add with carry // RS1 + RS2 + C => RD // Cycles - P {CONT, 16'b00011?????????11} : begin ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; {next_carry, alu_result} = rs1_data + rs2_data + {15'b0, carry_flag}; next_zero = !(|alu_result) && zero_flag; next_negative = alu_result[15]; next_overflow = (rs1_data[15] && rs2_data[15] && !alu_result[15]) || (!rs1_data[15] && !rs2_data[15] && alu_result[15]); end // ----------------------------------------------------------------------- // Instruction Group -- Branches // ----------------------------------------------------------------------- // Instruction = BCC REL9, Op Code = 0 0 1 0 0 0 0 REL9 // Branch if Carry Cleared // If C = 0, then PC + $0002 + (REL9 << 1) => PC // Cycles - PP/P {CONT, 16'b0010000?????????} : if (!carry_flag) begin next_cpu_state = S_STALL; load_next_inst = 1'b0; pc_incr_mux = jump_offset; next_pc = pc_sum; // There is a race condition when the default declaration is used end // Instruction = BCS REL9, Op Code = 0 0 1 0 0 0 1 REL9 // Branch if Carry Set // If C = 1, then PC + $0002 + (REL9 << 1) => PC // Cycles - PP/P {CONT, 16'b0010001?????????} : if (carry_flag) begin next_cpu_state = S_STALL; load_next_inst = 1'b0; pc_incr_mux = jump_offset; next_pc = pc_sum; end // Instruction = BNE REL9, Op Code = 0 0 1 0 0 1 0 REL9 // Branch if Not Equal // If Z = 0, then PC + $0002 + (REL9 << 1) => PC // Cycles - PP/P {CONT, 16'b0010010?????????} : if (!zero_flag) begin next_cpu_state = S_STALL; load_next_inst = 1'b0; pc_incr_mux = jump_offset; next_pc = pc_sum; end // Instruction = BEQ REL9, Op Code = 0 0 1 0 0 1 1 REL9 // Branch if Equal // If Z = 1, then PC + $0002 + (REL9 << 1) => PC // Cycles - PP/P {CONT, 16'b0010011?????????} : if (zero_flag) begin next_cpu_state = S_STALL; load_next_inst = 1'b0; pc_incr_mux = jump_offset; next_pc = pc_sum; end // Instruction = BPL REL9, Op Code = 0 0 1 0 1 0 0 REL9 // Branch if Plus // If N = 0, then PC + $0002 + (REL9 << 1) => PC // Cycles - PP/P {CONT, 16'b0010100?????????} : if (!negative_flag) begin next_cpu_state = S_STALL; load_next_inst = 1'b0; pc_incr_mux = jump_offset; next_pc = pc_sum; end // Instruction = BMI REL9, Op Code = 0 0 1 0 1 0 1 REL9 // Branch if Minus // If N = 1, then PC + $0002 + (REL9 << 1) => PC // Cycles - PP/P {CONT, 16'b0010101?????????} : if (negative_flag) begin next_cpu_state = S_STALL; load_next_inst = 1'b0; pc_incr_mux = jump_offset; next_pc = pc_sum; end // Instruction = BVC REL9, Op Code = 0 0 1 0 1 1 0 REL9 // Branch if Overflow Cleared // If V = 0, then PC + $0002 + (REL9 << 1) => PC // Cycles - PP/P {CONT, 16'b0010110?????????} : if (!overflow_flag) begin next_cpu_state = S_STALL; load_next_inst = 1'b0; pc_incr_mux = jump_offset; next_pc = pc_sum; end // Instruction = BVS REL9, Op Code = 0 0 1 0 1 1 1 REL9 // Branch if Overflow Set // If V = 1, then PC + $0002 + (REL9 << 1) => PC // Cycles - PP/P {CONT, 16'b0010111?????????} : if (overflow_flag) begin next_cpu_state = S_STALL; load_next_inst = 1'b0; pc_incr_mux = jump_offset; next_pc = pc_sum; end // Instruction = BHI REL9, Op Code = 0 0 1 1 0 0 0 REL9 // Branch if Higher // If C | Z = 0, then PC + $0002 + (REL9 << 1) => PC // Cycles - PP/P {CONT, 16'b0011000?????????} : if (!(carry_flag || zero_flag)) begin next_cpu_state = S_STALL; load_next_inst = 1'b0; pc_incr_mux = jump_offset; next_pc = pc_sum; end // Instruction = BLS REL9, Op Code = 0 0 1 1 0 0 1 REL9 // Branch if Lower or Same // If C | Z = 1, then PC + $0002 + (REL9 << 1) => PC // Cycles - PP/P {CONT, 16'b0011001?????????} : if (carry_flag || zero_flag) begin next_cpu_state = S_STALL; load_next_inst = 1'b0; pc_incr_mux = jump_offset; next_pc = pc_sum; end // Instruction = BGE REL9, Op Code = 0 0 1 1 0 1 0 REL9 // Branch if Greater than or Equal to Zero // If N ^ V = 0, then PC + $0002 + (REL9 << 1) => PC // Cycles - PP/P {CONT, 16'b0011010?????????} : if (!(negative_flag ^ overflow_flag)) begin next_cpu_state = S_STALL; load_next_inst = 1'b0; pc_incr_mux = jump_offset; next_pc = pc_sum; end // Instruction = BLT REL9, Op Code = 0 0 1 1 0 1 1 REL9 // Branch if Lower than Zero // If N ^ V = 1, then PC + $0002 + (REL9 << 1) => PC // Cycles - PP/P {CONT, 16'b0011011?????????} : if (negative_flag ^ overflow_flag) begin next_cpu_state = S_STALL; load_next_inst = 1'b0; pc_incr_mux = jump_offset; next_pc = pc_sum; end // Instruction = BGT REL9, Op Code = 0 0 1 1 1 0 0 REL9 // Branch if Greater than Zero // If Z | (N ^ V) = 0, then PC + $0002 + (REL9 << 1) => PC // Cycles - PP/P {CONT, 16'b0011100?????????} : if (!(zero_flag || (negative_flag ^ overflow_flag))) begin next_cpu_state = S_STALL; load_next_inst = 1'b0; pc_incr_mux = jump_offset; next_pc = pc_sum; end // Instruction = BLE REL9, Op Code = 0 0 1 1 1 0 1 REL9 // Branch if Less or Equal to Zero // If Z | (N ^ V) = 1, then PC + $0002 + (REL9 << 1) => PC // Cycles - PP/P {CONT, 16'b0011101?????????} : if (zero_flag || (negative_flag ^ overflow_flag)) begin next_cpu_state = S_STALL; load_next_inst = 1'b0; pc_incr_mux = jump_offset; next_pc = pc_sum; end // Instruction = BRA REL10, Op Code = 0 0 1 1 1 1 REL10 // Branch Always, signed offset // PC + $0002 + (REL10 << 1) => PC // Cycles - PP {CONT, 16'b001111??????????} : begin next_cpu_state = S_STALL; load_next_inst = 1'b0; pc_incr_mux = bra_offset; next_pc = pc_sum; end // ----------------------------------------------------------------------- // Instruction Group -- Load and Store Instructions // ----------------------------------------------------------------------- // Instruction = LDB RD, (RB, #OFFS5), Op Code = 0 1 0 0 0 RD RB OFFS5 // Load Byte from Memory, unsigned offset // M[RB, #OFFS5] => RD.L; $00 => RD.H // RB field == RS1 field // Cycles - Pr {CONT, 16'b01000???????????} : begin next_cpu_state = B_LOAD; load_next_inst = 1'b0; pc_incr_mux = 16'h0000; next_pc = pc_sum; data_access = 1'b1; data_address = rs1_data + {11'b0, op_code[4:0]}; end // Instruction = LDW RD, (RB, #OFFS5), Op Code = 0 1 0 0 1 RD RB OFFS5 // Load Word from Memory, unsigned offset // M[RB, #OFFS5] => RD // RB field == RS1 field // Cycles - PR {CONT, 16'b01001???????????} : begin next_cpu_state = W_LOAD; load_next_inst = 1'b0; pc_incr_mux = 16'h0000; next_pc = pc_sum; data_access = 1'b1; data_address = rs1_data + {11'b0, op_code[4:0]}; data_word_op = 1'b1; end // Instruction = STB RS, (RB, #OFFS5), Op Code = 0 1 0 1 0 RS RB OFFS5 // Store Byte to Memory, unsigned offset // RS.L => M[RB, #OFFS5] // RS field == RD fieild, RB field == RS1 field // Cycles - Pw {CONT, 16'b01010???????????} : begin next_cpu_state = S_STALL; load_next_inst = 1'b0; pc_incr_mux = 16'h0000; next_pc = pc_sum; data_access = 1'b1; data_write = 1'b1; data_address = rs1_data + {11'b0, op_code[4:0]}; end // Instruction = STW RS, (RB, #OFFS5), Op Code = 0 1 0 1 1 RS RB OFFS5 // Store Word to Memory, unsigned offset // RS => M[RB, #OFFS5] // RS field == RD fieild, RB field == RS1 field // Cycles - PW {CONT, 16'b01011???????????} : begin next_cpu_state = S_STALL; load_next_inst = 1'b0; pc_incr_mux = 16'h0000; next_pc = pc_sum; data_access = 1'b1; data_write = 1'b1; data_address = rs1_data + {11'b0, op_code[4:0]}; data_word_op = 1'b1; end // Instruction = LDB RD, (RB, RI), Op Code = 0 1 1 0 0 RD RB RI 0 0 // Load Byte from Memory // M[RB, RI] => RD.L; $00 => RD.H // RB field == RS1 field, RI field == RS2 field // Cycles - Pr {CONT, 16'b01100?????????00} : begin next_cpu_state = B_LOAD; load_next_inst = 1'b0; pc_incr_mux = 16'h0000; next_pc = pc_sum; data_access = 1'b1; data_address = rs1_data + rs2_data; end // Instruction = LDW RD, (RB, RI), Op Code = 0 1 1 0 1 RD RB RI 0 0 // Load Word from Memory // M[RB, RI] => RD // RB field == RS1 field, RI field == RS2 field // Cycles - PR {CONT, 16'b01101?????????00} : begin next_cpu_state = W_LOAD; load_next_inst = 1'b0; pc_incr_mux = 16'h0000; next_pc = pc_sum; data_access = 1'b1; data_address = rs1_data + rs2_data; data_word_op = 1'b1; end // Instruction = STB RS, (RB, RI), Op Code = 0 1 1 1 0 RS RB RI 0 0 // RS.L => M[RB, RI] // Store Byte to Memory // RS field == RD fieild, RB field == RS1 field, RI field == RS2 field // Cycles - Pw {CONT, 16'b01110?????????00} : begin next_cpu_state = S_STALL; load_next_inst = 1'b0; pc_incr_mux = 16'h0000; next_pc = pc_sum; data_access = 1'b1; data_write = 1'b1; data_address = rs1_data + rs2_data; end // Instruction = STW RS, (RB, RI), Op Code = 0 1 1 1 1 RS RB RI 0 0 // Store Word to Memory // RS => M[RB, RI] // RS field == RD fieild, RB field == RS1 field, RI field == RS2 field // Cycles - PW {CONT, 16'b01111?????????00} : begin next_cpu_state = S_STALL; load_next_inst = 1'b0; pc_incr_mux = 16'h0000; next_pc = pc_sum; data_access = 1'b1; data_write = 1'b1; data_address = rs1_data + rs2_data; data_word_op = 1'b1; end // Instruction = LDB RD, (RB, RI+), Op Code = 0 1 1 0 0 RD RB RI 0 1 // Load Byte from Memory // M[RB, RI] => RD.L; $00 => RD.H; RI+1 => RI // If the same general purpose register is used as index (RI) and destination register (RD), // the content of the register will not be incremented after the data move: M[RB, RI] => RD.L; $00 => RD.H // RB field == RS1 field, RI field == RS2 field // Cycles - Pr {CONT, 16'b01100?????????01} : begin next_cpu_state = B_LOAD; load_next_inst = 1'b0; pc_incr_mux = 16'h0000; next_pc = pc_sum; data_access = 1'b1; data_address = rs1_data + rs2_data; alu_result = rs2_data + 16'h0001; sel_rd_field = 1'b0; ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; end // Instruction = LDW RD, (RB, RI+), Op Code = 0 1 1 0 1 RD RB RI 0 1 // Load Word from Memory // M[RB, RI] => RD; RI+2 => RI // If the same general purpose register is used as index (RI) and destination register (RD), // the content of the register will not be incremented after the data move: M[RB, RI] => RD // RB field == RS1 field, RI field == RS2 field // Cycles - PR {CONT, 16'b01101?????????01} : begin next_cpu_state = W_LOAD; load_next_inst = 1'b0; pc_incr_mux = 16'h0000; next_pc = pc_sum; data_access = 1'b1; data_address = rs1_data + rs2_data; data_word_op = 1'b1; alu_result = rs2_data + 16'h0002; sel_rd_field = 1'b0; ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; end // Instruction = STB RS, (RB, RI+), Op Code = 0 1 1 1 0 RS RB RI 0 1 // Store Byte to Memory // RS.L => M[RB, RI]; RI+1 => RI // RS field == RD fieild, RB field == RS1 field, RI field == RS2 field // Cycles - Pw {CONT, 16'b01110?????????01} : begin next_cpu_state = S_STALL; load_next_inst = 1'b0; pc_incr_mux = 16'h0000; next_pc = pc_sum; data_access = 1'b1; data_write = 1'b1; data_address = rs1_data + rs2_data; alu_result = rs2_data + 16'h0001; sel_rd_field = 1'b0; ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; end // Instruction = STW RS, (RB, RI+), Op Code = 0 1 1 1 1 RS RB RI 0 1 // Store Word to Memory // RS => M[RB, RI]; RI+2 => RI // RS field == RD fieild, RB field == RS1 field, RI field == RS2 field // Cycles - PW {CONT, 16'b01111?????????01} : begin next_cpu_state = S_STALL; load_next_inst = 1'b0; pc_incr_mux = 16'h0000; next_pc = pc_sum; data_access = 1'b1; data_write = 1'b1; data_word_op = 1'b1; data_address = rs1_data + rs2_data; alu_result = rs2_data + 16'h0002; sel_rd_field = 1'b0; ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; end // Instruction = LDB RD, (RB, -RI), Op Code = 0 1 1 0 0 RD RB RI 1 0 // Load Byte from Memory // RI-1 => RI; M[RS, RI] => RD.L; $00 => RD.H // RB field == RS1 field, RI field == RS2 field // Cycles - Pr {CONT, 16'b01100?????????10} : begin next_cpu_state = B_LOAD; load_next_inst = 1'b0; pc_incr_mux = 16'h0000; next_pc = pc_sum; data_access = 1'b1; alu_result = rs2_data + 16'hffff; data_address = rs1_data + alu_result; sel_rd_field = 1'b0; ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; end // Instruction = LDW RD, (RB, -RI), Op Code = 0 1 1 0 1 RD RB RI 1 0 // Load Word from Memory // RI-2 => RI; M[RS, RI] => RD // RB field == RS1 field, RI field == RS2 field // Cycles - PR {CONT, 16'b01101?????????10} : begin next_cpu_state = W_LOAD; load_next_inst = 1'b0; pc_incr_mux = 16'h0000; next_pc = pc_sum; data_access = 1'b1; alu_result = rs2_data + 16'hfffe; data_address = rs1_data + alu_result; data_word_op = 1'b1; sel_rd_field = 1'b0; ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; end // Instruction = STB RS, (RB, -RI), Op Code = 0 1 1 1 0 RS RB RI 1 0 // Store Byte to Memory // RI-1 => RI; RS.L => M[RB, RI] // If the same general purpose register is used as index (RI) and source register (RS), // the unmodified content of the source register is written to the memory: RS.L => M[RB, RS-1]; RS-1 => RS // RS field == RD fieild, RB field == RS1 field, RI field == RS2 field // Cycles - Pw {CONT, 16'b01110?????????10} : begin next_cpu_state = S_STALL; load_next_inst = 1'b0; pc_incr_mux = 16'h0000; next_pc = pc_sum; data_access = 1'b1; data_write = 1'b1; alu_result = rs2_data + 16'hffff; data_address = rs1_data + alu_result; sel_rd_field = 1'b0; ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; end // Instruction = STW RS, (RB, -RI), Op Code = 0 1 1 1 1 RS RB RI 1 0 // Store Word to Memory // RI-2 => RI; RS => M[RB, RI] // If the same general purpose register is used as index (RI) and source register (RS), // the unmodified content of the source register is written to the memory: RS => M[RB, RS-2]; RS-2 => RS // RS field == RD fieild, RB field == RS1 field, RI field == RS2 field // Cycles - PW {CONT, 16'b01111?????????10} : begin next_cpu_state = S_STALL; load_next_inst = 1'b0; pc_incr_mux = 16'h0000; next_pc = pc_sum; data_access = 1'b1; data_write = 1'b1; data_word_op = 1'b1; alu_result = rs2_data + 16'hfffe; data_address = rs1_data + alu_result; sel_rd_field = 1'b0; ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; end // ----------------------------------------------------------------------- // Instruction Group -- Bit Field Instructions // ----------------------------------------------------------------------- // Instruction = BFEXT RD, RS1, RS2, Op Code = 0 1 1 0 0 RD RS1 RS2 1 1 // BFEXT - Bit Field Extract // RS1[(o+w):o] => RD[w:0]; 0 => RD[15:(w+1)] // Cycles - P {CONT, 16'b01100?????????11} : begin ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; shift_ammount = {1'b0, rs2_data[3:0]}; for (bfi = 0; bfi <= 15; bfi = bfi + 1) shift_in[bfi] = bf_mux_mask[bfi] ? rs1_data[bfi] : 1'b0; alu_result = shift_out; next_zero = !(|alu_result); next_negative = alu_result[15]; next_overflow = 1'b0; end // Instruction = BFINS RD, RS1, RS2, Op Code = 0 1 1 0 1 RD RS1 RS2 1 1 // BFINS - Bit Field Insert // RS1[w:0] => RD[(w+o):o // Cycles - P {CONT, 16'b01101?????????11} : begin ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; shift_left = 1'b1; shift_ammount = {1'b0, rs2_data[3:0]}; shift_in = rs1_data; for (bfi = 0; bfi <= 15; bfi = bfi + 1) alu_result[bfi] = bf_mux_mask[bfi] ? shift_out[bfi] : rd_data[bfi]; next_zero = !(|alu_result); next_negative = alu_result[15]; next_overflow = 1'b0; end // Instruction = BFINSI RD, RS1, RS2, Op Code = 0 1 1 1 0 RD RS1 RS2 1 1 // BFINSI - Bit Field Insert and Invert // !RS1[w:0] => RD[w+o:o] // Cycles - P {CONT, 16'b01110?????????11} : begin ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; shift_left = 1'b1; shift_ammount = {1'b0, rs2_data[3:0]}; shift_in = rs1_data; for (bfi = 0; bfi <= 15; bfi = bfi + 1) alu_result[bfi] = bf_mux_mask[bfi] ? !shift_out[bfi] : rd_data[bfi]; next_zero = !(|alu_result); next_negative = alu_result[15]; next_overflow = 1'b0; end // Instruction = BFINSX RD, RS1, RS2, Op Code = 0 1 1 1 1 RD RS1 RS2 1 1 // BFINSX - Bit Field Insert and XNOR // !(RS1[w:0] ^ RD[w+o:o]) => RD[w+o:o] // Cycles - P {CONT, 16'b01111?????????11} : begin ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; shift_left = 1'b1; shift_ammount = {1'b0, rs2_data[3:0]}; shift_in = rs1_data; for (bfii = 0; bfii <= 15; bfii = bfii + 1) alu_result[bfii] = bf_mux_mask[bfii] ? !(shift_out[bfii] ^ rd_data[bfii]) : rd_data[bfii]; next_zero = !(|alu_result); next_negative = alu_result[15]; next_overflow = 1'b0; end // ----------------------------------------------------------------------- // Instruction Group -- Logic Immediate Instructions // ----------------------------------------------------------------------- // Instruction = ANDL RD, #IMM8, Op Code = 1 0 0 0 0 RD IMM8 // AND - Logical AND // RD.L & IMM8 => RD.L // Cycles - P {CONT, 16'b10000???????????} : begin ena_rd_low_byte = 1'b1; alu_result = rd_data & {8'b0, op_code[7:0]}; next_zero = !(|alu_result[7:0]); next_negative = alu_result[7]; next_overflow = 1'b0; end // Instruction = ANDH RD, #IMM8, Op Code = 1 0 0 0 1 RD IMM8 // AND - Logical AND // RD.H & IMM8 => RD.H // Cycles - P {CONT, 16'b10001???????????} : begin ena_rd_high_byte = 1'b1; alu_result = rd_data & {op_code[7:0], 8'b0}; next_zero = !(|alu_result[15:8]); next_negative = alu_result[15]; next_overflow = 1'b0; end // Instruction = BITL RD, #IMM8, Op Code = 1 0 0 1 0 RD IMM8 // RD.L & IMM8 => NONE {CONT, 16'b10010???????????} : begin next_zero = !(|(rd_data[7:0] & op_code[7:0])); next_negative = rd_data[7] && op_code[7]; next_overflow = 1'b0; end // Instruction = BITH RD, #IMM8, Op Code = 1 0 0 1 1 RD IMM8 // RD.H & IMM8 => NONE {CONT, 16'b10011???????????} : begin next_zero = !(|(rd_data[15:8] & op_code[7:0])); next_negative = rd_data[15] && op_code[7]; next_overflow = 1'b0; end // Instruction = ORL RD, #IMM8, Op Code = 1 0 1 0 0 RD IMM8 // OR - Logical OR // RD.L | IMM8 => RD.L {CONT, 16'b10100???????????} : begin ena_rd_low_byte = 1'b1; alu_result = rd_data | {8'b0, op_code[7:0]}; next_zero = !(|alu_result[7:0]); next_negative = alu_result[7]; next_overflow = 1'b0; end // Instruction = ORH RD, #IMM8, Op Code = 1 0 1 0 1 RD IMM8 // OR - Logical OR // RD.H | IMM8 => RD.H {CONT, 16'b10101???????????} : begin ena_rd_high_byte = 1'b1; alu_result = rd_data | {op_code[7:0], 8'b0}; next_zero = !(|alu_result[15:8]); next_negative = alu_result[15]; next_overflow = 1'b0; end // Instruction = XNORL RD, #IMM8, Op Code = 1 0 1 1 0 RD IMM8 // XNOR - Logical Exclusive NOR // ~(RD.L ^ IMM8) => RD.L {CONT, 16'b10110???????????} : begin ena_rd_low_byte = 1'b1; alu_result = ~(rd_data ^ {8'b0, op_code[7:0]}); next_zero = !(|alu_result[7:0]); next_negative = alu_result[7]; next_overflow = 1'b0; end // Instruction = XNORH RD, #IMM8, Op Code = 1 0 1 1 1 RD IMM8 // XNOR - Logical Exclusive NOR // ~(RD.H ^ IMM8) => RD.H {CONT, 16'b10111???????????} : begin ena_rd_high_byte = 1'b1; alu_result = ~(rd_data ^ {op_code[7:0], 8'b0}); next_zero = !(|alu_result[15:8]); next_negative = alu_result[15]; next_overflow = 1'b0; end // ----------------------------------------------------------------------- // Instruction Group -- Arithmetic Immediate Instructions // ----------------------------------------------------------------------- // Instruction = SUBL RD, #IMM8, Op Code = 1 1 0 0 0 RD IMM8 // SUB - Subtract without Carry // RD - $00:IMM8 => RD // Cycles - P {CONT, 16'b11000???????????} : begin ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; alu_result = rd_data - {8'b0, op_code[7:0]}; next_zero = !(|alu_result); next_negative = alu_result[15]; next_carry = (!rd_data[7] && op_code[7]) || (!rd_data[7] && alu_result[7]) || (op_code[7] && alu_result[7]); next_overflow = (rd_data[7] && !op_code[7] && !alu_result[7]) || (!rd_data[7] && op_code[7] && alu_result[7]); end // Instruction = SUBH RD, #IMM8, Op Code = 1 1 0 0 1 RD IMM8 // SUB - Subtract without Carry // RD - IMM8:$00 => RD // Cycles - P {CONT, 16'b11001???????????} : begin ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; {next_carry, alu_result} = rd_data - {op_code[7:0], 8'b0}; next_zero = !(|alu_result); next_negative = alu_result[15]; next_overflow = (rd_data[15] && !op_code[7] && !alu_result[15]) || (!rd_data[15] && op_code[7] && alu_result[15]); end // Instruction = CMPL RS, #IMM8, Op Code = 1 1 0 1 0 RS IMM8 // RS.L - IMM8 => NONE, only condition code flags get updated // RS field == RD field // Cycles - P {CONT, 16'b11010???????????} : begin alu_result = {8'b0, rd_data[7:0] - op_code[7:0]}; next_zero = !(|alu_result[7:0]); next_negative = alu_result[7]; next_carry = (!rd_data[7] && op_code[7]) || (!rd_data[7] && alu_result[7]) || (op_code[7] && alu_result[7]); next_overflow = (rd_data[7] && !op_code[7] && !alu_result[7]) || (!rd_data[7] && op_code[7] && alu_result[7]); end // Instruction = CPCH RS, #IMM8, Op Code = 1 1 0 1 1 RS IMM8 // RS.H - IMM8 - C => NONE, only condition code flags get updated // RS field == RD field // Cycles - P {CONT, 16'b11011???????????} : begin alu_result = {rd_data[15:8], 8'b0} - {op_code[7:0], 8'b0} - {7'b0, carry_flag, 8'b0}; next_zero = !(|alu_result[15:8]) && zero_flag; next_negative = alu_result[15]; next_carry = (!rd_data[15] && op_code[7]) || (!rd_data[15] && alu_result[15]) || (op_code[7] && alu_result[15]); next_overflow = (rd_data[15] && !op_code[7] && !alu_result[15]) || (!rd_data[15] && op_code[7] && alu_result[15]); end // Instruction = ADDL RD, #IMM8, Op Code = 1 1 1 0 0 RD IMM8 // ADD - ADD without carry // RD + $00:IMM8 => RD // Cycles - P {CONT, 16'b11100???????????} : begin ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; alu_result = rd_data + {8'b0, op_code[7:0]}; next_zero = !(|alu_result); next_negative = alu_result[15]; next_carry = (rd_data[7] && op_code[7]) || (rd_data[7] && !alu_result[7]) || (op_code[7] && !alu_result[7]); next_overflow = (!rd_data[7] && !op_code[7] && alu_result[7]) || (rd_data[7] && op_code[7] && !alu_result[7]); end // Instruction = ADDH RD, #IMM8, Op Code = 1 1 1 0 1 RD IMM8 // ADD - ADD without carry // RD + IMM8:$00 => RD // Cycles - P {CONT, 16'b11101???????????} : begin ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; {next_carry, alu_result} = rd_data + {op_code[7:0], 8'b0}; next_zero = !(|alu_result); next_negative = alu_result[15]; next_overflow = (rd_data[15] && op_code[7] && !alu_result[15]) || (!rd_data[15] && !op_code[7] && alu_result[15]); end // Instruction = LDL RD, #IMM8, Op Code = 1 1 1 1 0 RD IMM8 // IMM8 => RD.L; $00 => RD.H, High Byte is cleared // Cycles - P {CONT, 16'b11110???????????} : begin ena_rd_low_byte = 1'b1; ena_rd_high_byte = 1'b1; alu_result = {8'b0, op_code[7:0]}; end // Instruction = LDH RD, #IMM8, Op Code = 1 1 1 1 1 RD IMM8 // IMM8 => RD.H, Low Byte is unchanged // Cycles - P {CONT, 16'b11111???????????} : begin ena_rd_high_byte = 1'b1; alu_result = {op_code[7:0], 8'b0}; end default : begin // synopsys translate_off $display("\nOP Code Error\n"); // synopsys translate_on next_cpu_state = DEBUG; pc_incr_mux = 16'h0000; next_pc = pc_sum; load_next_inst = 1'b0; op_code_error = 1'b1; end endcase end // always xgate_barrel_shift barrel_shift( // outputs .shift_out( shift_out ), .shift_rollover( shift_rollover ), // inputs .shift_left( shift_left ), .shift_ammount( shift_ammount ), .shift_in( shift_in ), .shift_filler( shift_filler ) ); // Three to Eight line decoder always @* case (semaph_risc) // synopsys parallel_case 4'h0 : semap_risc_bit = 8'b0000_0001; 4'h1 : semap_risc_bit = 8'b0000_0010; 4'h2 : semap_risc_bit = 8'b0000_0100; 4'h3 : semap_risc_bit = 8'b0000_1000; 4'h4 : semap_risc_bit = 8'b0001_0000; 4'h5 : semap_risc_bit = 8'b0010_0000; 4'h6 : semap_risc_bit = 8'b0100_0000; 4'h7 : semap_risc_bit = 8'b1000_0000; endcase assign semaph_stat = |risc_semap; // Semaphore Bits genvar sem_gen_count; generate for (sem_gen_count = 0; sem_gen_count < 8; sem_gen_count = sem_gen_count + 1) begin:semaphore_ semaphore_bit sbit( // outputs .host_status( host_semap[sem_gen_count] ), .risc_status( risc_semap[sem_gen_count] ), // inputs .risc_clk( risc_clk ), .async_rst_b( async_rst_b ), .risc_bit_sel( semap_risc_bit[sem_gen_count] ), .csem( clear_semaph ), .ssem( set_semaph ), .host_wrt( write_xgsem ), .host_bit_mask( perif_data[sem_gen_count+8] ), .host_bit( perif_data[sem_gen_count] ) ); end endgenerate endmodule // xgate_inst_decode // ----------------------------------------------------------------------------- // ----------------------------------------------------------------------------- // ----------------------------------------------------------------------------- module xgate_barrel_shift ( output reg [15:0] shift_out, output reg shift_rollover, input shift_left, input [ 4:0] shift_ammount, input [15:0] shift_in, input [15:0] shift_filler ); always @* casez ({shift_left, shift_ammount}) // synopsys parallel_case // Start Right Shifts 6'b0_0_0000 : begin shift_out = shift_in; shift_rollover = 1'b0; end 6'b0_0_0001 : begin shift_out = {shift_filler[ 0], shift_in[15: 1]}; shift_rollover = shift_in[ 0]; end 6'b0_0_0010 : begin shift_out = {shift_filler[ 1:0], shift_in[15: 2]}; shift_rollover = shift_in[ 1]; end 6'b0_0_0011 : begin shift_out = {shift_filler[ 2:0], shift_in[15: 3]}; shift_rollover = shift_in[ 2]; end 6'b0_0_0100 : begin shift_out = {shift_filler[ 3:0], shift_in[15: 4]}; shift_rollover = shift_in[ 3]; end 6'b0_0_0101 : begin shift_out = {shift_filler[ 4:0], shift_in[15: 5]}; shift_rollover = shift_in[ 4]; end 6'b0_0_0110 : begin shift_out = {shift_filler[ 5:0], shift_in[15: 6]}; shift_rollover = shift_in[ 5]; end 6'b0_0_0111 : begin shift_out = {shift_filler[ 6:0], shift_in[15: 7]}; shift_rollover = shift_in[ 6]; end 6'b0_0_1000 : begin shift_out = {shift_filler[ 7:0], shift_in[15: 8]}; shift_rollover = shift_in[ 7]; end 6'b0_0_1001 : begin shift_out = {shift_filler[ 8:0], shift_in[15: 9]}; shift_rollover = shift_in[ 8]; end 6'b0_0_1010 : begin shift_out = {shift_filler[ 9:0], shift_in[15:10]}; shift_rollover = shift_in[ 9]; end 6'b0_0_1011 : begin shift_out = {shift_filler[10:0], shift_in[15:11]}; shift_rollover = shift_in[10]; end 6'b0_0_1100 : begin shift_out = {shift_filler[11:0], shift_in[15:12]}; shift_rollover = shift_in[11]; end 6'b0_0_1101 : begin shift_out = {shift_filler[12:0], shift_in[15:13]}; shift_rollover = shift_in[12]; end 6'b0_0_1110 : begin shift_out = {shift_filler[13:0], shift_in[15:14]}; shift_rollover = shift_in[13]; end 6'b0_0_1111 : begin shift_out = {shift_filler[14:0], shift_in[15]}; shift_rollover = shift_in[14]; end 6'b0_1_???? : begin shift_out = shift_filler[15:0]; shift_rollover = shift_in[15]; end // Start Left Shifts 6'b1_0_0000 : begin shift_out = shift_in; shift_rollover = 1'b0; end 6'b1_0_0001 : begin shift_out = {shift_in[14:0], shift_filler[15]}; shift_rollover = shift_in[15]; end 6'b1_0_0010 : begin shift_out = {shift_in[13:0], shift_filler[15:14]}; shift_rollover = shift_in[14]; end 6'b1_0_0011 : begin shift_out = {shift_in[12:0], shift_filler[15:13]}; shift_rollover = shift_in[13]; end 6'b1_0_0100 : begin shift_out = {shift_in[11:0], shift_filler[15:12]}; shift_rollover = shift_in[12]; end 6'b1_0_0101 : begin shift_out = {shift_in[10:0], shift_filler[15:11]}; shift_rollover = shift_in[11]; end 6'b1_0_0110 : begin shift_out = {shift_in[ 9:0], shift_filler[15:10]}; shift_rollover = shift_in[10]; end 6'b1_0_0111 : begin shift_out = {shift_in[ 8:0], shift_filler[15: 9]}; shift_rollover = shift_in[ 9]; end 6'b1_0_1000 : begin shift_out = {shift_in[ 7:0], shift_filler[15: 8]}; shift_rollover = shift_in[ 8]; end 6'b1_0_1001 : begin shift_out = {shift_in[ 6:0], shift_filler[15: 7]}; shift_rollover = shift_in[ 7]; end 6'b1_0_1010 : begin shift_out = {shift_in[ 5:0], shift_filler[15: 6]}; shift_rollover = shift_in[ 6]; end 6'b1_0_1011 : begin shift_out = {shift_in[ 4:0], shift_filler[15: 5]}; shift_rollover = shift_in[ 5]; end 6'b1_0_1100 : begin shift_out = {shift_in[ 3:0], shift_filler[15 :4]}; shift_rollover = shift_in[ 4]; end 6'b1_0_1101 : begin shift_out = {shift_in[ 2:0], shift_filler[15: 3]}; shift_rollover = shift_in[ 3]; end 6'b1_0_1110 : begin shift_out = {shift_in[ 1:0], shift_filler[15: 2]}; shift_rollover = shift_in[ 2]; end 6'b1_0_1111 : begin shift_out = {shift_in[ 0], shift_filler[15: 1]}; shift_rollover = shift_in[ 1]; end 6'b1_1_???? : begin shift_out = shift_filler[15: 0]; shift_rollover = shift_in[ 0]; end default : begin shift_out = shift_in; shift_rollover = 1'b0; end endcase endmodule // xgate_barrel_shift // ----------------------------------------------------------------------------- // ----------------------------------------------------------------------------- // ----------------------------------------------------------------------------- module semaphore_bit #(parameter NO_LOCK = 2'b00, parameter RISC_LOCK = 2'b10, parameter HOST_LOCK = 2'b11) ( output host_status, // Return status for Host processor output risc_status, // Return Status for RISC processor input risc_clk, // Semaphore register clock input async_rst_b, // Async reset signal input risc_bit_sel, // Bit selected by RISC input csem, // RISC Clear Semaphore Bit input ssem, // RISC Set Semaphore Bit input host_wrt, // Host write to the Semaphore Register input host_bit_mask, // Host mask bit written to the Semaphore bit input host_bit // Host bit written to the Semaphore bit ); reg [1:0] next_semap_state; reg [1:0] semap_state; assign host_status = semap_state == HOST_LOCK; assign risc_status = ssem && risc_bit_sel && ((semap_state == RISC_LOCK) || (next_semap_state == RISC_LOCK)); always @(posedge risc_clk or negedge async_rst_b) if (!async_rst_b) semap_state <= NO_LOCK; else semap_state <= next_semap_state; always @* begin case(semap_state) NO_LOCK: begin if (host_wrt && host_bit_mask && host_bit) next_semap_state = HOST_LOCK; else if (ssem && risc_bit_sel) next_semap_state = RISC_LOCK; else next_semap_state = NO_LOCK; end RISC_LOCK: begin if (csem && risc_bit_sel) next_semap_state = NO_LOCK; else next_semap_state = RISC_LOCK; end HOST_LOCK: begin if (host_wrt && host_bit_mask && !host_bit) next_semap_state = NO_LOCK; else next_semap_state = HOST_LOCK; end default: next_semap_state = NO_LOCK; endcase end endmodule // semaphore_bit
Go to most recent revision | Compare with Previous | Blame | View Log