URL
https://opencores.org/ocsvn/xgate/xgate/trunk
Subversion Repositories xgate
[/] [xgate/] [trunk/] [rtl/] [verilog/] [xgate_top.v] - Rev 16
Go to most recent revision | Compare with Previous | Blame | View Log
//////////////////////////////////////////////////////////////////////////////// // // XGATE Coprocessor - XGATE Top Level Module // // Author: Robert Hayes // rehayes@opencores.org // // Downloaded from: http://www.opencores.org/projects/xgate..... // //////////////////////////////////////////////////////////////////////////////// // Copyright (c) 2009, Robert Hayes // // This source file is free software: you can redistribute it and/or modify // it under the terms of the GNU Lesser General Public License as published // by the Free Software Foundation, either version 3 of the License, or // (at your option) any later version. // // Supplemental terms. // * Redistributions of source code must retain the above copyright // notice, this list of conditions and the following disclaimer. // * Neither the name of the <organization> nor the // names of its contributors may be used to endorse or promote products // derived from this software without specific prior written permission. // // THIS SOFTWARE IS PROVIDED BY Robert Hayes ''AS IS'' AND ANY // EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED // WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE // DISCLAIMED. IN NO EVENT SHALL Robert Hayes BE LIABLE FOR ANY // DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES // (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; // LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND // ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS // SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. // // You should have received a copy of the GNU General Public License // along with this program. If not, see <http://www.gnu.org/licenses/>. //////////////////////////////////////////////////////////////////////////////// // 45678901234567890123456789012345678901234567890123456789012345678901234567890 module xgate_top #(parameter ARST_LVL = 1'b0, // asynchronous reset level parameter SINGLE_CYCLE = 1'b0, // parameter MAX_CHANNEL = 127, // Max XGATE Interrupt Channel Number parameter DWIDTH = 16) // Data bus width ( // Wishbone Slave Signals output [DWIDTH-1:0] wbs_dat_o, // databus output output wbs_ack_o, // bus cycle acknowledge output input wbs_clk_i, // master clock input input wbs_rst_i, // synchronous active high reset input arst_i, // asynchronous reset input [4:0] wbs_adr_i, // lower address bits input [DWIDTH-1:0] wbs_dat_i, // databus input input wbs_we_i, // write enable input input wbs_stb_i, // stobe/core select signal input wbs_cyc_i, // valid bus cycle input input [1:0] wbs_sel_i, // Select byte in word bus transaction // Wishbone Master Signals output [DWIDTH-1:0] wbm_dat_o, // databus output output wbm_we_o, // write enable output output wbm_stb_o, // stobe/core select signal output wbm_cyc_o, // valid bus cycle output output [ 1:0] wbm_sel_o, // Select byte in word bus transaction output [15:0] wbm_adr_o, // Address bits input [DWIDTH-1:0] wbm_dat_i, // databus input input wbm_ack_i, // bus cycle acknowledge input // XGATE IO Signals output [ 7:0] xgswt, // XGATE Software Trigger Register output write_mem_strb_l, // Strobe for writing low data byte output write_mem_strb_h, // Strobe for writing high data bye output xg_sw_irq, // Xgate Software interrupt output [MAX_CHANNEL:0] xgif, // XGATE Interrupt Flag input [MAX_CHANNEL:0] chan_req_i, // XGATE Interrupt request input risc_clk, // Clock for RISC core input scantestmode // Chip in in scan test mode ); wire zero_flag; wire negative_flag; wire carry_flag; wire overflow_flag; wire [15:0] xgr1; // XGATE Register #1 wire [15:0] xgr2; // XGATE Register #2 wire [15:0] xgr3; // XGATE Register #3 wire [15:0] xgr4; // XGATE Register #4 wire [15:0] xgr5; // XGATE Register #5 wire [15:0] xgr6; // XGATE Register #6 wire [15:0] xgr7; // XGATE Register #7 wire [15:0] xgisp74; // XGATE Interrupt level 7-4 stack pointer wire [15:0] xgisp30; // XGATE Interrupt level 3-0 stack pointer wire write_xgmctl; // Write Strobe for XGMCTL register wire write_xgisp74; // Write Strobe for XGISP74 register wire write_xgisp31; // Write Strobe for XGISP31 register wire write_xgvbr; // Write Strobe for XGVBR_LO register wire write_xgif_7; // Write Strobe for Interrupt Flag Register 7 wire write_xgif_6; // Write Strobe for Interrupt Flag Register 6 wire write_xgif_5; // Write Strobe for Interrupt Flag Register 5 wire write_xgif_4; // Write Strobe for Interrupt Flag Register 4 wire write_xgif_3; // Write Strobe for Interrupt Flag Register 3 wire write_xgif_2; // Write Strobe for Interrupt Flag Register 2 wire write_xgif_1; // Write Strobe for Interrupt Flag Register 1 wire write_xgif_0; // Write Strobe for Interrupt Flag Register 0 wire write_xgswt; // Write Strobe for XGSWT register wire write_xgsem; // Write Strobe for XGSEM register wire write_xgccr; // Write Strobe for XGATE Condition Code Register wire write_xgpc; // Write Strobe for XGATE Program Counter wire write_xgr7; // Write Strobe for XGATE Data Register R7 wire write_xgr6; // Write Strobe for XGATE Data Register R6 wire write_xgr5; // Write Strobe for XGATE Data Register R5 wire write_xgr4; // Write Strobe for XGATE Data Register R4 wire write_xgr3; // Write Strobe for XGATE Data Register R3 wire write_xgr2; // Write Strobe for XGATE Data Register R2 wire write_xgr1; // Write Strobe for XGATE Data Register R1 wire clear_xgif_7; // Strobe for decode to clear interrupt flag bank 7 wire clear_xgif_6; // Strobe for decode to clear interrupt flag bank 6 wire clear_xgif_5; // Strobe for decode to clear interrupt flag bank 5 wire clear_xgif_4; // Strobe for decode to clear interrupt flag bank 4 wire clear_xgif_3; // Strobe for decode to clear interrupt flag bank 3 wire clear_xgif_2; // Strobe for decode to clear interrupt flag bank 2 wire clear_xgif_1; // Strobe for decode to clear interrupt flag bank 1 wire clear_xgif_0; // Strobe for decode to clear interrupt flag bank 0 wire [15:0] clear_xgif_data; // Data for decode to clear interrupt flag wire xge; // XGATE Module Enable wire xgfrz; // Stop XGATE in Freeze Mode wire xgdbg_set; // Enter XGATE Debug Mode wire xgdbg_clear; // Leave XGATE Debug Mode wire xgss; // XGATE Single Step wire xgsweif_c; // Clear XGATE Software Error Interrupt FLag wire xgie; // XGATE Interrupt Enable wire [ 6:0] int_req; // Encoded interrupt request wire [ 6:0] xgchid; // Channel actively being processed wire [15:1] xgvbr; // XGATE vector Base Address Register wire brk_irq_ena; // Enable BRK instruction to generate interrupt wire [15:0] xgate_address; // wire [15:0] write_mem_data; // wire [15:0] read_mem_data; // wire mem_req_ack; // wire debug_active; // RISC state machine in Debug mode wire [ 7:0] host_semap; // Semaphore status for host // wire [15:0] write_mem_data; // wire [15:0] read_mem_data; // wire [15:0] perif_data; // --------------------------------------------------------------------------- // Wishbone Slave Bus interface xgate_wbs_bus #(.ARST_LVL(ARST_LVL), .SINGLE_CYCLE(SINGLE_CYCLE)) wishbone_s( .wbs_dat_o( wbs_dat_o ), .wbs_ack_o( wbs_ack_o ), .wbs_clk_i( wbs_clk_i ), .wbs_rst_i( wbs_rst_i ), .arst_i( arst_i ), .wbs_adr_i( wbs_adr_i ), .wbs_dat_i( wbs_dat_i ), .wbs_we_i( wbs_we_i ), .wbs_stb_i( wbs_stb_i ), .wbs_cyc_i( wbs_cyc_i ), .wbs_sel_i( wbs_sel_i ), // outputs .sync_reset( sync_reset ), .write_xgmctl( write_xgmctl ), .write_xgisp74( write_xgisp74 ), .write_xgisp30( write_xgisp30 ), .write_xgvbr( write_xgvbr ), .write_xgif_7( write_xgif_7 ), .write_xgif_6( write_xgif_6 ), .write_xgif_5( write_xgif_5 ), .write_xgif_4( write_xgif_4 ), .write_xgif_3( write_xgif_3 ), .write_xgif_2( write_xgif_2 ), .write_xgif_1( write_xgif_1 ), .write_xgif_0( write_xgif_0 ), .write_xgswt( write_xgswt ), .write_xgsem( write_xgsem ), .write_xgccr( write_xgccr ), .write_xgpc( write_xgpc ), .write_xgr7( write_xgr7 ), .write_xgr6( write_xgr6 ), .write_xgr5( write_xgr5 ), .write_xgr4( write_xgr4 ), .write_xgr3( write_xgr3 ), .write_xgr2( write_xgr2 ), .write_xgr1( write_xgr1 ), // inputs .async_rst_b ( async_rst_b ), .read_regs ( // in -- read register bits { xgr7, // XGR7 xgr6, // XGR6 xgr5, // XGR5 xgr4, // XGR4 xgr3, // XGR3 xgr2, // XGR2 xgr1, // XGR1 16'b0, // Reserved (XGR0) xgate_address, // XGPC {12'h000, negative_flag, zero_flag, overflow_flag, carry_flag}, // XGCCR 16'b0, // Reserved {8'h00, host_semap}, // XGSEM {8'h00, xgswt}, // XGSWT xgif[ 15: 0], // XGIF_0 xgif[ 31: 16], // XGIF_1 xgif[ 47: 32], // XGIF_2 xgif[ 63: 48], // XGIF_3 xgif[ 79: 64], // XGIF_4 xgif[ 95: 80], // XGIF_5 xgif[111: 96], // XGIF_6 xgif[127:112], // XGIF_7 {xgvbr[15:1], 1'b0}, // XGVBR xgisp30, // Reserved xgisp74, // Reserved {8'b0, 1'b0, xgchid}, // XGCHID {8'b0, xge, xgfrz, debug_active, 1'b0, 2'b0, xg_sw_irq, xgie} // XGMCTL } ) ); // --------------------------------------------------------------------------- xgate_regs #(.ARST_LVL(ARST_LVL), .MAX_CHANNEL(MAX_CHANNEL)) regs( // outputs .xge( xge ), .xgfrz( xgfrz ), .xgdbg_set( xgdbg_set ), .xgdbg_clear( xgdbg_clear ), .xgss( xgss ), .xgsweif_c( xgsweif_c ), .xgie( xgie ), .brk_irq_ena( brk_irq_ena ), .xgvbr( xgvbr ), .xgswt( xgswt ), .xgisp74( xgisp74 ), .xgisp30( xgisp30 ), .clear_xgif_7( clear_xgif_7 ), .clear_xgif_6( clear_xgif_6 ), .clear_xgif_5( clear_xgif_5 ), .clear_xgif_4( clear_xgif_4 ), .clear_xgif_3( clear_xgif_3 ), .clear_xgif_2( clear_xgif_2 ), .clear_xgif_1( clear_xgif_1 ), .clear_xgif_0( clear_xgif_0 ), .clear_xgif_data( clear_xgif_data ), // inputs .async_rst_b( async_rst_b ), .sync_reset( sync_reset ), .bus_clk( wbs_clk_i ), .write_bus( wbs_dat_i ), .write_xgmctl( write_xgmctl ), .write_xgisp74( write_xgisp74 ), .write_xgisp30( write_xgisp30 ), .write_xgvbr( write_xgvbr ), .write_xgif_7( write_xgif_7 ), .write_xgif_6( write_xgif_6 ), .write_xgif_5( write_xgif_5 ), .write_xgif_4( write_xgif_4 ), .write_xgif_3( write_xgif_3 ), .write_xgif_2( write_xgif_2 ), .write_xgif_1( write_xgif_1 ), .write_xgif_0( write_xgif_0 ), .write_xgswt( write_xgswt ) ); // --------------------------------------------------------------------------- xgate_risc #(.MAX_CHANNEL(MAX_CHANNEL)) risc( // outputs .xgate_address( xgate_address ), .write_mem_strb_l( write_mem_strb_l ), .write_mem_strb_h( write_mem_strb_h ), .write_mem_data( write_mem_data ), .zero_flag( zero_flag ), .negative_flag( negative_flag ), .carry_flag( carry_flag ), .overflow_flag( overflow_flag ), .xgchid( xgchid ), .host_semap( host_semap ), .xgr1( xgr1 ), .xgr2( xgr2 ), .xgr3( xgr3 ), .xgr4( xgr4 ), .xgr5( xgr5 ), .xgr6( xgr6 ), .xgr7( xgr7 ), .xgif( xgif ), .debug_active( debug_active ), .xg_sw_irq( xg_sw_irq ), // inputs .risc_clk( risc_clk ), .perif_data( wbs_dat_i ), .async_rst_b( async_rst_b ), .read_mem_data( read_mem_data ), .mem_req_ack( mem_req_ack ), .xge( xge ), .xgfrz( xgfrz ), .xgdbg_set( xgdbg_set ), .xgdbg_clear( xgdbg_clear ), .xgss( xgss ), .xgvbr( xgvbr ), .int_req( int_req ), .xgie( xgie ), .brk_irq_ena( brk_irq_ena ), .write_xgsem( write_xgsem ), .write_xgccr( write_xgccr ), .write_xgpc( write_xgpc ), .write_xgr7( write_xgr7 ), .write_xgr6( write_xgr6 ), .write_xgr5( write_xgr5 ), .write_xgr4( write_xgr4 ), .write_xgr3( write_xgr3 ), .write_xgr2( write_xgr2 ), .write_xgr1( write_xgr1 ), .clear_xgif_7( clear_xgif_7 ), .clear_xgif_6( clear_xgif_6 ), .clear_xgif_5( clear_xgif_5 ), .clear_xgif_4( clear_xgif_4 ), .clear_xgif_3( clear_xgif_3 ), .clear_xgif_2( clear_xgif_2 ), .clear_xgif_1( clear_xgif_1 ), .clear_xgif_0( clear_xgif_0 ), .xgsweif_c( xgsweif_c ), .clear_xgif_data( clear_xgif_data ) ); xgate_irq_encode #(.MAX_CHANNEL(MAX_CHANNEL)) irq_encode( // outputs .int_req( int_req ), // inputs .chan_req_i( chan_req_i ) ); // --------------------------------------------------------------------------- // Wishbone Master Bus interface xgate_wbm_bus #(.ARST_LVL(ARST_LVL)) wishbone_m( // Wishbone Master Signals .wbm_dat_o( wbm_dat_o ), .wbm_we_o( wbm_we_o ), .wbm_stb_o( wbm_stb_o ), .wbm_cyc_o( wbm_cyc_o ), .wbm_sel_o( wbm_sel_o ), .wbm_adr_o( wbm_adr_o ), .wbm_dat_i( wbm_dat_i ), .wbm_ack_i( wbm_ack_i ), .wbs_clk_i( wbs_clk_i ), .wbs_rst_i( wbs_rst_i ), .arst_i( arst_i ), // XGATE Control Signals .read_mem_data( read_mem_data ), .xgate_address( xgate_address ), .mem_req_ack( mem_req_ack ), .write_mem_strb_l( write_mem_strb_l ), .write_mem_strb_h( write_mem_strb_h ), .write_mem_data( write_mem_data ) ); endmodule // xgate_top
Go to most recent revision | Compare with Previous | Blame | View Log