URL
https://opencores.org/ocsvn/xgate/xgate/trunk
Subversion Repositories xgate
[/] [xgate/] [trunk/] [sw/] [xgate_test_code/] [inst_test/] [inst_test.s] - Rev 81
Go to most recent revision | Compare with Previous | Blame | View Log
; 345678901234567890123456789012345678901234567890123456789012345678901234567890 ; Instruction set test for xgate RISC processor core ; Bob Hayes - Sept 1 2009 ; Version 0.1 Basic test of all instruction done. Need to improve Condition ; Code function testing. CPU XGATE ORG $fe00 DS.W 2 ; reserve two words at channel 0 ; channel 1 DC.W _START ; point to start address DC.W V_PTR ; point to initial variables ; channel 2 DC.W _START2 ; point to start address DC.W V_PTR ; point to initial variables ; channel 3 DC.W _START3 ; point to start address DC.W V_PTR ; point to initial variables ; channel 4 DC.W _START4 ; point to start address DC.W V_PTR ; point to initial variables ; channel 5 DC.W _START5 ; point to start address DC.W V_PTR ; point to initial variables ; channel 6 DC.W _START6 ; point to start address DC.W V_PTR ; point to initial variables ; channel 7 DC.W _START7 ; point to start address DC.W V_PTR ; point to initial variables ; channel 8 DC.W _START8 ; point to start address DC.W V_PTR ; point to initial variables ; channel 9 DC.W _START9 ; point to start address DC.W V_PTR ; point to initial variables ; channel 10 DC.W _START10 ; point to start address DC.W V_PTR ; point to initial variables ; channel 11 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 12 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 13 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 14 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 15 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 16 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 17 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 18 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 19 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 20 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 21 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 22 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 23 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 24 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 25 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 26 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 27 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 28 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 29 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 30 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 31 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 32 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 33 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 34 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 35 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 36 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 37 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 38 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 39 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 40 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 41 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 42 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 43 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 44 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 45 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 46 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 47 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 48 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 49 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ; channel 50 DC.W _ERROR ; point to start address DC.W V_PTR ; point to initial variables ORG $2000 ; with comment V_PTR EQU 123 DC.W BACK_ DS.W 8 DC.B $56 DS.B 11 ALIGN 1 ;------------------------------------------------------------------------------- ; Place where undefined interrupts go ;------------------------------------------------------------------------------- _ERROR LDL R2,#$04 ; Sent Message to Testbench Error Register LDH R2,#$80 LDL R3,#$ff STB R3,(R2,#0) SIF RTS ;------------------------------------------------------------------------------- ; Test Shift instructions ;------------------------------------------------------------------------------- _START LDL R2,#$00 ; Sent Message to Testbench Check Point Register LDH R2,#$80 LDL R3,#$01 STB R3,(R2,#0) STB R3,(R2,#2) ; Send Message to clear Testbench interrupt register ; Test Bit Field Find First One LDL R5,#$01 ; R5=$0001 LDH R5,#$4f ; R5=$4f01 BFFO R4,R5 BVS _FAIL ; Negative Flag should be clear LDL R6,#$0e ; First one should have been in bit position 14 SUB R0,R6,R4 BNE _FAIL BFFO R4,R0 ; Zero Value should set Carry Bit BCC _FAIL LDH R5,#$00 ; R5=$0001 BFFO R4,R5 BCS _FAIL ; Carry should be clear BVS _FAIL ; Overflow Flag should be clear SUB R0,R0,R4 ; R4 Should be zero BNE _FAIL ; Test ASR instruction LDL R5,#$04 ; R5=$0008 LDH R5,#$81 ; R5=$8108 LDL R3,#$03 ASR R5,R3 ; R5=$f000, Carry flag set BCC _FAIL BVS _FAIL ; Negative Flag should be clear LDL R4,#$20 ; R4=$0020 LDH R4,#$f0 ; R4=$f020 SUB R0,R5,R4 ; Compare R5 to R4 BNE _FAIL ; Test CSL insrtruction LDL R5,#$10 ; R5=$0010 LDH R5,#$88 ; R5=$8810 LDL R3,#$05 CSL R5,R3 ; R5=$081f, Carry flag set BCC _FAIL LDL R4,#$00 ; R4=$0000 LDH R4,#$02 ; R4=$0200 SUB R0,R5,R4 ; Compare R5 to R4 BNE _FAIL ;Test CSR instruction LDL R5,#$88 ; R5=$0088 LDH R5,#$10 ; R5=$1088 LDL R3,#$04 CSR R5,R3 ; R5=$0108, Carry flag set BCC _FAIL LDL R4,#$08 ; R4=$0008 LDH R4,#$01 ; R4=$0108 SUB R0,R5,R4 ; Compare R5 to R4 BNE _FAIL ;Test LSL instruction LDL R2,#$ff ; R2=$00ff LDH R2,#$07 ; R2=$07ff LDL R1,#$06 LSL R2,R1 ; R2=$ffc0, Carry flag set BCC _FAIL LDL R4,#$c0 ; R4=$0008 LDH R4,#$ff ; R4=$0108 SUB R0,R2,R4 ; Compare R2 to R4 BNE _FAIL ;Test LSR instruction LDL R7,#$02 ; R7=$0002 LDH R7,#$c3 ; R7=$c302 LDL R6,#$02 LSR R7,R6 ; R7=$30c0, Carry flag set BCC _FAIL LDL R4,#$c0 ; R4=$00c0 LDH R4,#$30 ; R4=$30c0 SUB R0,R7,R4 ; Compare R7 to R4 BNE _FAIL ;Test ROL instruction LDL R7,#$62 ; R7=$0062 LDH R7,#$c3 ; R7=$c362 LDL R6,#$04 ROL R7,R6 ; R7=$362c BVS _FAIL ; Overflow Flag should be clear LDL R4,#$2c ; R4=$002c LDH R4,#$36 ; R4=$362c SUB R0,R7,R4 ; Compare R7 to R4 BNE _FAIL ;Test ROR instruction LDL R7,#$62 ; R7=$0062 LDH R7,#$c3 ; R7=$c362 LDL R6,#$08 ROL R7,R6 ; R7=$62c3 BVS _FAIL ; Overflow Flag should be clear LDL R4,#$c3 ; R4=$00c3 LDH R4,#$62 ; R4=$62c3 SUB R0,R7,R4 ; Compare R7 to R4 BNE _FAIL ; Test ASR instruction LDL R5,#$00 ; R5=$0000 LDH R5,#$80 ; R5=$8000 ASR R5,#0 ; R5=$ffff, Carry flag set BCC _FAIL BVS _FAIL ; Overflow Flag should be clear LDL R4,#$ff ; R4=$00ff LDH R4,#$ff ; R4=$ffff SUB R0,R5,R4 ; Compare R5 to R4 BNE _FAIL ; Test CSL insrtruction LDL R5,#$01 ; R5=$0001 LDH R5,#$0f ; R5=$0f01 CSL R5,#0 ; R5=$0000, Carry flag set BCC _FAIL LDL R4,#$00 ; R4=$0000 LDH R4,#$00 ; R4=$0000 SUB R0,R5,R4 ; Compare R5 to R4 BNE _FAIL ;Test CSR instruction LDL R5,#$ff ; R5=$00ff LDH R5,#$80 ; R5=$80ff CSR R5,#15 ; R5=$0001, Carry flag clear BCS _FAIL LDL R4,#$01 ; R4=$0001 LDH R4,#$00 ; R4=$0001 SUB R0,R5,R4 ; Compare R5 to R4 BNE _FAIL ;Test LSL instruction LDL R2,#$1a ; R2=$001a LDH R2,#$ff ; R2=$ff1a LSL R2,#12 ; R2=$a000, Carry flag set BCC _FAIL LDL R4,#$00 ; R4=$0000 LDH R4,#$a0 ; R4=$a000 SUB R0,R2,R4 ; Compare R2 to R4 BNE _FAIL ;Test LSR instruction LDL R7,#$8f ; R7=$008f LDH R7,#$b2 ; R7=$b18f LSR R7,#8 ; R7=$00b0, Carry flag set BCC _FAIL LDL R4,#$b2 ; R4=$00b0 LDH R4,#$00 ; R4=$00b0 SUB R0,R7,R4 ; Compare R7 to R4 BNE _FAIL ;Test ROL instruction LDL R7,#$62 ; R7=$0062 LDH R7,#$c3 ; R7=$c362 ROL R7,#8 ; R7=$62c3 BVS _FAIL ; Overflow Flag should be clear LDL R4,#$c3 ; R4=$00c3 LDH R4,#$62 ; R4=$62c3 SUB R0,R7,R4 ; Compare R7 to R4 BNE _FAIL ;Test ROR instruction LDL R7,#$62 ; R7=$0062 LDH R7,#$c3 ; R7=$c362 ROL R7,#12 ; R7=$2c36 BVS _FAIL ; Overflow Flag should be clear LDL R4,#$36 ; R4=$0036 LDH R4,#$2c ; R4=$2c36 SUB R0,R7,R4 ; Compare R7 to R4 BNE _FAIL LDL R2,#$00 ; Sent Message to Testbench Check Point Register LDH R2,#$80 LDL R3,#$02 STB R3,(R2,#0) NOP NOP SIF RTS _FAIL LDL R2,#$04 ; Sent Message to Testbench Error Register LDH R2,#$80 LDL R3,#$02 STB R3,(R2,#0) SIF RTS ;------------------------------------------------------------------------------- ; Test Logical Byte wide instructions ;------------------------------------------------------------------------------- _START2 LDL R2,#$00 ; Sent Message to Testbench Check Point Register LDH R2,#$80 LDL R3,#$03 ; Checkpoint Value STB R3,(R2,#0) LDL R3,#$02 ; Thread Value STB R3,(R2,#2) ; Send Message to clear Testbench interrupt register ;Test ANDL instruction LDL R7,#$55 ; R7=$0055 LDH R7,#$a5 ; R7=$a555 ANDL R7,#$00 ; R7=&a500 BNE _FAIL2 ; Zero Flag should be set BVS _FAIL2 ; Overflow Flag should be clear BMI _FAIL2 ; Negative Flag should be clear LDL R3,#$00 ; R3=$0000 LDH R3,#$a5 ; R3=$a500 SUB R0,R7,R3 ; Compare R7 to R3 BNE _FAIL2 LDL R7,#$c5 ; R7=$00c5 LDH R7,#$a5 ; R7=$a5c5 ANDL R7,#$80 ; R7=$a580 BPL _FAIL2 ; Negative Flag should be set BEQ _FAIL2 ; Zero Flag should be clear BVS _FAIL2 ; Overflow Flag should be clear LDL R3,#$80 ; R3=$0080 LDH R3,#$a5 ; R3=$a580 SUB R0,R7,R3 ; Compare R7 to R3 BNE _FAIL2 ;Test ANDH instruction LDL R7,#$55 ; R7=$0055 LDH R7,#$a5 ; R7=$a555 ANDH R7,#$00 ; R7=&0055 BNE _FAIL2 ; Zero Flag should be set BVS _FAIL2 ; Overflow Flag should be clear BMI _FAIL2 ; Negative Flag should be clear LDL R3,#$55 ; R3=$0000 LDH R3,#$00 ; R3=$a500 SUB R0,R7,R3 ; Compare R7 to R3 BNE _FAIL2 LDL R7,#$c5 ; R7=$00c5 LDH R7,#$a5 ; R7=$a5c5 ANDH R7,#$80 ; R7=$80c5 BPL _FAIL2 ; Negative Flag should be set BEQ _FAIL2 ; Zero Flag should be clear BVS _FAIL2 ; Overflow Flag should be clear LDL R3,#$c5 ; R3=$00c5 LDH R3,#$80 ; R3=$80c5 SUB R0,R7,R3 ; Compare R7 to R3 BNE _FAIL2 ;Test BITL instruction LDL R7,#$55 ; R7=$0055 LDH R7,#$a5 ; R7=$a555 BITL R7,#$00 ; R7=&a500 BNE _FAIL2 ; Zero Flag should be set BVS _FAIL2 ; Overflow Flag should be clear BMI _FAIL2 ; Negative Flag should be clear LDL R7,#$c5 ; R7=$00c5 LDH R7,#$a5 ; R7=$a5c5 BITL R7,#$80 ; R7=$a580 BPL _FAIL2 ; Negative Flag should be set BEQ _FAIL2 ; Zero Flag should be clear BVS _FAIL2 ; Overflow Flag should be clear ;Test BITH instruction LDL R7,#$55 ; R7=$0055 LDH R7,#$a5 ; R7=$a555 BITH R7,#$00 ; R7=&0055 BNE _FAIL2 ; Zero Flag should be set BVS _FAIL2 ; Overflow Flag should be clear BMI _FAIL2 ; Negative Flag should be clear LDL R7,#$c5 ; R7=$00c5 LDH R7,#$a5 ; R7=$a5c5 BITH R7,#$80 ; R7=$80c5 BPL _FAIL2 ; Negative Flag should be set BEQ _FAIL2 ; Zero Flag should be clear BVS _FAIL2 ; Overflow Flag should be clear ;Test ORL instruction LDL R2,#$0b TFR CCR,R2 ; Negative=1, Zero=0, Overflow=1, Carry=1 LDL R7,#$00 ; R7=$0000 LDH R7,#$a5 ; R7=$a500 ORL R7,#$00 ; R7=&a500 BMI _FAIL2 ; Negative Flag should be clear BNE _FAIL2 ; Zero Flag should be set BVS _FAIL2 ; Overflow Flag should be clear BCC _FAIL2 ; Carry Flag should be set LDL R3,#$00 ; R3=$0000 LDH R3,#$a5 ; R3=$a500 SUB R0,R7,R3 ; Compare R7 to R3 BNE _FAIL2 LDL R2,#$06 TFR CCR,R2 ; Negative=0, Zero=1, Overflow=1, Carry=0 LDL R7,#$9f ; R7=$009f LDH R7,#$a5 ; R7=$a59f ORL R7,#$60 ; R7=$a5ff BPL _FAIL2 ; Negative Flag should be set BEQ _FAIL2 ; Zero Flag should be clear BVS _FAIL2 ; Overflow Flag should be clear BCS _FAIL2 ; Carry Flag should be clear LDL R3,#$ff ; R3=$00ff LDH R3,#$a5 ; R3=$a5ff SUB R0,R7,R3 ; Compare R7 to R3 BNE _FAIL2 ;Test ORH instruction LDL R2,#$0b TFR CCR,R2 ; Negative=1, Zero=0, Overflow=1, Carry=1 LDL R7,#$88 ; R7=$0088 LDH R7,#$00 ; R7=$0088 ORH R7,#$00 ; R7=&0088 BMI _FAIL2 ; Negative Flag should be clear BNE _FAIL2 ; Zero Flag should be set BVS _FAIL2 ; Overflow Flag should be clear BCC _FAIL2 ; Carry Flag should be set LDL R3,#$88 ; R3=$0088 LDH R3,#$00 ; R3=$0088 SUB R0,R7,R3 ; Compare R7 to R3 BNE _FAIL2 LDL R2,#$06 TFR CCR,R2 ; Negative=0, Zero=1, Overflow=1, Carry=0 LDL R7,#$36 ; R7=$0036 LDH R7,#$a1 ; R7=$a136 ORH R7,#$50 ; R7=$f136 BPL _FAIL2 ; Negative Flag should be set BEQ _FAIL2 ; Zero Flag should be clear BVS _FAIL2 ; Overflow Flag should be clear BCS _FAIL2 ; Carry Flag should be clear LDL R3,#$36 ; R3=$0036 LDH R3,#$f1 ; R3=$f136 SUB R0,R7,R3 ; Compare R7 to R3 BNE _FAIL2 ;Test XNORL instruction LDL R2,#$0b TFR CCR,R2 ; Negative=1, Zero=0, Overflow=1, Carry=1 LDL R7,#$c3 ; R7=$00c3 LDH R7,#$96 ; R7=$96c3 XNORL R7,#$3c ; R7=$9600 BMI _FAIL2 ; Negative Flag should be clear BNE _FAIL2 ; Zero Flag should be set BVS _FAIL2 ; Overflow Flag should be clear BCC _FAIL2 ; Carry Flag should be set LDL R3,#$00 ; R3=$0000 LDH R3,#$96 ; R3=$9600 SUB R0,R7,R3 ; Compare R7 to R3 BNE _FAIL2 LDL R2,#$06 TFR CCR,R2 ; Negative=0, Zero=1, Overflow=1, Carry=0 LDL R6,#$00 ; R6=$0000 LDH R6,#$a5 ; R6=$a500 XNORL R6,#$73 ; R6=$a58c BPL _FAIL2 ; Negative Flag should be set BEQ _FAIL2 ; Zero Flag should be clear BVS _FAIL2 ; Overflow Flag should be clear BCS _FAIL2 ; Carry Flag should be clear LDL R3,#$8c ; R3=$008c LDH R3,#$a5 ; R3=$a58c SUB R0,R6,R3 ; Compare R6 to R3 BNE _FAIL2 ;Test XNORH instruction LDL R2,#$0b TFR CCR,R2 ; Negative=1, Zero=0, Overflow=1, Carry=1 LDL R7,#$c3 ; R7=$00c3 LDH R7,#$96 ; R7=$96c3 XNORH R7,#$69 ; R7=$00c3 BMI _FAIL2 ; Negative Flag should be clear BNE _FAIL2 ; Zero Flag should be set BVS _FAIL2 ; Overflow Flag should be clear BCC _FAIL2 ; Carry Flag should be set LDL R3,#$c3 ; R3=$00c3 LDH R3,#$00 ; R3=$00c3 SUB R0,R7,R3 ; Compare R7 to R3 BNE _FAIL2 LDL R2,#$06 TFR CCR,R2 ; Negative=0, Zero=1, Overflow=1, Carry=0 LDL R6,#$66 ; R6=$0066 LDH R6,#$66 ; R6=$6666 XNORH R6,#$66 ; R6=$ff66 BPL _FAIL2 ; Negative Flag should be set BEQ _FAIL2 ; Zero Flag should be clear BVS _FAIL2 ; Overflow Flag should be clear BCS _FAIL2 ; Carry Flag should be clear LDL R3,#$66 ; R3=$0066 LDH R3,#$ff ; R3=$ff66 SUB R0,R6,R3 ; Compare R6 to R3 BNE _FAIL2 LDL R2,#$00 ; Sent Message to Testbench Check Point Register LDH R2,#$80 LDL R3,#$04 STB R3,(R2,#0) SIF RTS _FAIL2 LDL R2,#$04 ; Sent Message to Testbench Error Register LDH R2,#$80 LDL R3,#$04 STB R3,(R2,#0) SIF RTS ;------------------------------------------------------------------------------- ; Test Logical Word Wide instructions ;------------------------------------------------------------------------------- _START3 LDL R2,#$00 ; Sent Message to Testbench Check Point Register LDH R2,#$80 LDL R3,#$05 ; Checkpoint Value STB R3,(R2,#0) LDL R3,#$03 ; Thread Value STB R3,(R2,#2) ; Send Message to clear Testbench interrupt register ;Test SEX instruction LDL R2,#$0b TFR CCR,R2 ; Negative=1, Zero=0, Overflow=1, Carry=1 LDL R3,#$00 ; R3=$0000 LDH R3,#$ff ; R3=$ff00 SEX R3 ; R3=$0000 BMI _FAIL3 ; Negative Flag should be clear BNE _FAIL3 ; Zero Flag should be set BVS _FAIL3 ; Overflow Flag should be clear BCC _FAIL3 ; Carry Flag should be set LDL R6,#$00 ; R6=$0000 LDH R6,#$00 ; R6=$0000 SUB R0,R6,R3 ; Compare R6 to R3 BNE _FAIL3 LDL R2,#$06 TFR CCR,R2 ; Negative=0, Zero=1, Overflow=1, Carry=0 LDL R6,#$83 ; R6=$0083 LDH R6,#$00 ; R6=$0083 SEX R6 ; R6=$ff83 BPL _FAIL3 ; Negative Flag should be set BEQ _FAIL3 ; Zero Flag should be clear BVS _FAIL3 ; Overflow Flag should be clear BCS _FAIL3 ; Carry Flag should be clear LDL R3,#$83 ; R3=$0083 LDH R3,#$ff ; R3=$ff83 SUB R0,R6,R3 ; Compare R6 to R3 BNE _FAIL3 ;Test PAR instruction LDL R2,#$0a TFR CCR,R2 ; Negative=1, Zero=0, Overflow=1, Carry=0 LDL R4,#$00 ; R4=$0000 LDH R4,#$00 ; R4=$0000 PAR R4 ; R4=$0000 BMI _FAIL3 ; Negative Flag should be clear BNE _FAIL3 ; Zero Flag should be set BVS _FAIL3 ; Overflow Flag should be clear BCS _FAIL3 ; Carry Flag should be clear LDL R6,#$00 ; R6=$0000 LDH R6,#$00 ; R6=$0000 SUB R0,R6,R4 ; Compare R6 to R4 BNE _FAIL3 LDL R2,#$0e TFR CCR,R2 ; Negative=1, Zero=1, Overflow=1, Carry=0 LDL R6,#$01 ; R6=$0001 LDH R6,#$03 ; R6=$0301 PAR R6 ; R6=$0301 BMI _FAIL3 ; Negative Flag should be clear BEQ _FAIL3 ; Zero Flag should be clear BVS _FAIL3 ; Overflow Flag should be clear BCC _FAIL3 ; Carry Flag should be set LDL R3,#$01 ; R3=$0001 LDH R3,#$03 ; R3=$0301 SUB R0,R6,R3 ; Compare R6 to R3 BNE _FAIL3 ;Test AND instruction LDL R2,#$0a TFR CCR,R2 ; Negative=1, Zero=0, Overflow=1, Carry=0 LDL R6,#$55 ; R6=$0055 LDH R6,#$aa ; R6=$aa55 LDL R5,#$aa ; R5=$00aa LDH R5,#$55 ; R5=$55aa AND R3,R5,R6 ; R3=$0000 BMI _FAIL3 ; Negative Flag should be clear BNE _FAIL3 ; Zero Flag should be set BVS _FAIL3 ; Overflow Flag should be clear BCS _FAIL3 ; Carry Flag should be clear SUB R0,R0,R3 ; Compare R0 to R3 BNE _FAIL3 LDL R7,#$55 ; R7=$00c5 LDH R7,#$aa ; R7=$aa55 LDL R2,#$07 TFR CCR,R2 ; Negative=0, Zero=1, Overflow=1, Carry=1 AND R4,R6,R7 ; R4=$aa55 BPL _FAIL3 ; Negative Flag should be set BEQ _FAIL3 ; Zero Flag should be clear BVS _FAIL3 ; Overflow Flag should be clear BCC _FAIL3 ; Carry Flag should be set SUB R0,R4,R7 ; Compare R4 to R7 BNE _FAIL2 ;Test OR instruction LDL R2,#$0a TFR CCR,R2 ; Negative=1, Zero=0, Overflow=1, Carry=0 LDL R6,#$00 ; R6=$0000 LDL R5,#$00 ; R5=$0000 OR R3,R5,R6 ; R3=$0000 BMI _FAIL3 ; Negative Flag should be clear BNE _FAIL3 ; Zero Flag should be set BVS _FAIL3 ; Overflow Flag should be clear BCS _FAIL3 ; Carry Flag should be clear SUB R0,R0,R3 ; Compare R0 to R3 BNE _FAIL3 LDL R7,#$55 ; R7=$00c5 LDH R7,#$aa ; R7=$aa55 LDL R6,#$8a ; R6=$008a LDH R6,#$10 ; R7=$108a LDL R2,#$07 TFR CCR,R2 ; Negative=0, Zero=1, Overflow=1, Carry=1 OR R4,R6,R7 ; R4=$badf BPL _FAIL3 ; Negative Flag should be set BEQ _FAIL3 ; Zero Flag should be clear BVS _FAIL3 ; Overflow Flag should be clear BCC _FAIL3 ; Carry Flag should be set LDL R3,#$df ; R3=$00df LDH R3,#$ba ; R3=$badf SUB R0,R4,R3 ; Compare R6 to R3 BNE _FAIL3 ;Test XNOR instruction LDL R2,#$0a TFR CCR,R2 ; Negative=1, Zero=0, Overflow=1, Carry=0 LDL R1,#$55 ; R1=$0055 LDH R1,#$aa ; R1=$aa55 LDL R5,#$aa ; R5=$00aa LDH R5,#$55 ; R5=$55aa XNOR R3,R5,R1 ; R3=$0000 BMI _FAIL3 ; Negative Flag should be clear BNE _FAIL3 ; Zero Flag should be set BVS _FAIL3 ; Overflow Flag should be clear BCS _FAIL3 ; Carry Flag should be clear SUB R0,R0,R3 ; Compare R0 to R3 BNE _FAIL3 LDL R7,#$cc ; R7=$00cc LDH R7,#$33 ; R7=$33cc LDL R2,#$01 ; R2=$0001 LDH R2,#$40 ; R2=$4001 TFR CCR,R2 ; Negative=0, Zero=1, Overflow=1, Carry=1 XNOR R4,R7,R2 ; R4=$8c32 BPL _FAIL3 ; Negative Flag should be set BEQ _FAIL3 ; Zero Flag should be clear BVS _FAIL3 ; Overflow Flag should be clear BCC _FAIL3 ; Carry Flag should be set LDL R3,#$32 ; R3=$0032 LDH R3,#$8c ; R3=$8c32 SUB R0,R4,R3 ; Compare R4 to R3 BNE _FAIL3 LDL R2,#$00 ; Sent Message to Testbench Check Point Register LDH R2,#$80 LDL R3,#$06 STB R3,(R2,#0) NOP SIF RTS _FAIL3 LDL R2,#$04 ; Sent Message to Testbench Error Register LDH R2,#$80 LDL R3,#$06 STB R3,(R2,#0) SIF RTS ;------------------------------------------------------------------------------- ; Test Bit Field instructions ;------------------------------------------------------------------------------- _START4 LDL R2,#$00 ; Sent Message to Testbench Check Point Register LDH R2,#$80 LDL R3,#$07 ; Checkpoint Value STB R3,(R2,#0) LDL R3,#$04 ; Thread Value STB R3,(R2,#2) ; Send Message to clear Testbench interrupt register ;Test BFEXT instruction LDL R2,#$0e TFR CCR,R2 ; Negative=1, Zero=1, Overflow=1, Carry=0 LDL R6,#$34 ; Set offset to 4 and width to 3(4 bits) LDL R5,#$a6 ; Set R5=$00a6 LDH R5,#$c3 ; Set R5=$c3a6 LDL R4,#$ff ; Set R4=$00ff SEX R4 ; Set R4=$ffff BFEXT R4,R5,R6 ; R4=$000a BMI _FAIL4 ; Negative Flag should be clear BEQ _FAIL4 ; Zero Flag should be clear BVS _FAIL4 ; Overflow Flag should be clear BCS _FAIL4 ; Carry Flag should be clear LDL R7,#$0a ; R7=$00cc SUB R0,R7,R4 ; Compare R7 to R4 BNE _FAIL4 LDL R6,#$b8 ; Set offset to 8 and width to 11(12 bits) BFEXT R4,R5,R6 ; R4=$00c3 LDL R7,#$c3 ; R7=$00c3 SUB R0,R7,R4 ; Compare R7 to R4 BNE _FAIL4 ;Test BFINS instruction LDL R2,#$06 TFR CCR,R2 ; Negative=0, Zero=1, Overflow=1, Carry=0 LDL R6,#$34 ; Set offset to 4 and width to 3(4 bits) LDL R5,#$a6 ; Set R5=$00a6 LDH R5,#$c3 ; Set R5=$c3a6 LDL R4,#$ff ; Set R4=$00ff SEX R4 ; Set R4=$ffff BFINS R4,R5,R6 ; R4=$ffaf BPL _FAIL4 ; Negative Flag should be set BEQ _FAIL4 ; Zero Flag should be clear BVS _FAIL4 ; Overflow Flag should be clear BCS _FAIL4 ; Carry Flag should be clear LDL R7,#$6f ; R7=$006f LDH R7,#$ff ; R7=$ff6f SUB R0,R7,R4 ; Compare R7 to R4 BNE _FAIL4 LDL R6,#$b0 ; Set offset to 0 and width to 11(12 bits) BFINS R4,R5,R6 ; R4=$f3a6 LDL R7,#$a6 ; R7=$00a6 LDH R7,#$f3 ; R7=$f3a6 SUB R0,R7,R4 ; Compare R7 to R4 BNE _FAIL4 ;Test BFINSI instruction LDL R2,#$06 TFR CCR,R2 ; Negative=0, Zero=1, Overflow=1, Carry=0 LDL R6,#$3c ; Set offset to 12 and width to 3(4 bits) LDL R5,#$a6 ; Set R5=$00a6 LDH R5,#$c3 ; Set R5=$c3a6 LDL R4,#$ff ; Set R4=$00ff SEX R4 ; Set R4=$ffff BFINSI R4,R5,R6 ; R4=$9fff BPL _FAIL4 ; Negative Flag should be set BEQ _FAIL4 ; Zero Flag should be clear BVS _FAIL4 ; Overflow Flag should be clear BCS _FAIL4 ; Carry Flag should be clear LDL R7,#$ff ; R7=$00ff LDH R7,#$9f ; R7=$ff6f SUB R0,R7,R4 ; Compare R7 to R4 BNE _FAIL4 LDL R6,#$78 ; Set offset to 8 and width to 7(8 bits) BFINSI R4,R5,R6 ; R4=$59ff LDL R7,#$ff ; R7=$00ff LDH R7,#$59 ; R7=$59ff SUB R0,R7,R4 ; Compare R7 to R4 BNE _FAIL4 ;Test BFINSX instruction LDL R2,#$06 TFR CCR,R2 ; Negative=0, Zero=1, Overflow=1, Carry=0 LDL R6,#$38 ; Set offset to 8 and width to 3(4 bits) LDL R5,#$a6 ; Set R5=$00a6 LDH R5,#$c3 ; Set R5=$c3a6 LDL R4,#$ff ; Set R4=$00ff LDH R4,#$fa ; Set R4=$faff BFINSX R4,R5,R6 ; R4=$f3ff BPL _FAIL4 ; Negative Flag should be set BEQ _FAIL4 ; Zero Flag should be clear BVS _FAIL4 ; Overflow Flag should be clear BCS _FAIL4 ; Carry Flag should be clear LDL R7,#$ff ; R7=$00ff LDH R7,#$f3 ; R7=$f3ff SUB R0,R7,R4 ; Compare R7 to R4 BNE _FAIL4 LDL R6,#$70 ; Set offset to 0 and width to 7(8 bits) BFINSX R4,R5,R6 ; R4=$f3a6 LDL R7,#$a6 ; R7=$00a6 LDH R7,#$f3 ; R7=$f3a6 SUB R0,R7,R4 ; Compare R7 to R4 BNE _FAIL4 LDL R2,#$00 ; Sent Message to Testbench Check Point Register LDH R2,#$80 LDL R3,#$08 STB R3,(R2,#0) NOP SIF RTS _FAIL4 LDL R2,#$04 ; Sent Message to Testbench Error Register LDH R2,#$80 LDL R3,#$08 STB R3,(R2,#0) SIF RTS ;------------------------------------------------------------------------------- ; Test Branch instructions ;------------------------------------------------------------------------------- _START5 LDL R2,#$00 ; Sent Message to Testbench Check Point Register LDH R2,#$80 LDL R3,#$09 ; Checkpoint Value STB R3,(R2,#0) LDL R3,#$05 ; Thread Value STB R3,(R2,#2) ; Send Message to clear Testbench interrupt register ;Test BCC instruction C = 0 LDL R2,#$00 TFR CCR,R2 ; Negative=0, Zero=0, Overflow=0, Carry=0 BCC _BCC_OK1 ; Take Branch BRA _BR_ERR _BCC_OK1 LDL R2,#$01 TFR CCR,R2 ; Negative=0, Zero=0, Overflow=0, Carry=1 BCC _BR_ERR ; Don't take branch ;Test BCS instruction C = 1 LDL R2,#$01 TFR CCR,R2 ; Negative=0, Zero=0, Overflow=0, Carry=1 BCS _BCS_OK1 ; Take Branch BRA _BR_ERR _BCS_OK1 LDL R2,#$00 TFR CCR,R2 ; Negative=0, Zero=0, Overflow=0, Carry=0 BCS _BR_ERR ; Don't take branch ;Test BEQ instruction Z = 1 LDL R2,#$04 TFR CCR,R2 ; Negative=0, Zero=1, Overflow=0, Carry=0 BEQ _BEQ_OK1 ; Take Branch BRA _BR_ERR _BEQ_OK1 LDL R2,#$00 TFR CCR,R2 ; Negative=0, Zero=0, Overflow=0, Carry=0 BEQ _BR_ERR ; Don't take branch ;Test BNE instruction Z = 0 LDL R2,#$00 TFR CCR,R2 ; Negative=0, Zero=0, Overflow=0, Carry=0 BNE _BNE_OK1 ; Take Branch BRA _BR_ERR _BNE_OK1 LDL R2,#$04 TFR CCR,R2 ; Negative=0, Zero=1, Overflow=0, Carry=0 BNE _BR_ERR ; Don't take branch ;Test BPL instruction N = 0 LDL R2,#$00 TFR CCR,R2 ; Negative=0, Zero=0, Overflow=0, Carry=0 BPL _BPL_OK1 ; Take Branch BRA _BR_ERR _BPL_OK1 LDL R2,#$08 TFR CCR,R2 ; Negative=1, Zero=0, Overflow=0, Carry=0 BPL _BR_ERR ; Don't take branch ;Test BMI instruction N = 1 LDL R2,#$08 TFR CCR,R2 ; Negative=1, Zero=0, Overflow=0, Carry=0 BMI _BMI_OK1 ; Take Branch BRA _BR_ERR _BMI_OK1 LDL R2,#$00 TFR CCR,R2 ; Negative=0, Zero=0, Overflow=0, Carry=0 BMI _BR_ERR ; Don't take branch ;Test BVC instruction V = 0 LDL R2,#$00 TFR CCR,R2 ; Negative=0, Zero=0, Overflow=0, Carry=0 BVC _BVC_OK1 ; Take Branch BRA _BR_ERR _BVC_OK1 LDL R2,#$02 TFR CCR,R2 ; Negative=0, Zero=0, Overflow=1, Carry=0 BVC _BR_ERR ; Don't take branch ;Test BVS instruction V = 1 LDL R2,#$02 TFR CCR,R2 ; Negative=0, Zero=0, Overflow=1, Carry=0 BVS _BVS_OK1 ; Take Branch BRA _BR_ERR _BVS_OK1 LDL R2,#$00 TFR CCR,R2 ; Negative=0, Zero=0, Overflow=0, Carry=0 BVS _BR_ERR ; Don't take branch ;Test BLS instruction C | Z = 1 LDL R2,#$01 TFR CCR,R2 ; Negative=0, Zero=0, Overflow=0, Carry=1 BLS _BLS_OK1 ; Take Branch BRA _BR_ERR _BLS_OK1 LDL R2,#$04 TFR CCR,R2 ; Negative=0, Zero=1, Overflow=0, Carry=0 BLS _BLS_OK2 ; Take Branch BRA _BR_ERR _BLS_OK2 LDL R2,#$00 TFR CCR,R2 ; Negative=0, Zero=0, Overflow=0, Carry=0 BLS _BR_ERR ; Don't take branch ;Test BGE instruction N ^ V = 0 LDL R2,#$0a TFR CCR,R2 ; Negative=1, Zero=0, Overflow=1, Carry=0 BGE _BGE_OK1 ; Take Branch BRA _BR_ERR _BGE_OK1 LDL R2,#$05 TFR CCR,R2 ; Negative=0, Zero=1, Overflow=0, Carry=1 BGE _BGE_OK2 ; Take Branch BRA _BR_ERR _BGE_OK2 LDL R2,#$08 TFR CCR,R2 ; Negative=1, Zero=0, Overflow=0, Carry=0 BGE _BR_ERR ; Don't take branch ;Test BHI instruction Z | C = 0 LDL R2,#$0a TFR CCR,R2 ; Negative=1, Zero=0, Overflow=1, Carry=0 BHI _BHI_OK1 ; Take Branch BRA _BR_ERR _BHI_OK1 LDL R2,#$0b TFR CCR,R2 ; Negative=1, Zero=0, Overflow=1, Carry=1 BHI _BR_ERR ; Don't take branch LDL R2,#$0e TFR CCR,R2 ; Negative=1, Zero=1, Overflow=1, Carry=0 BHI _BR_ERR ; Don't take branch ;Test BGT instruction Z | (N ^ V) = 0 LDL R2,#$0a TFR CCR,R2 ; Negative=1, Zero=0, Overflow=1, Carry=0 BGT _BGT_OK1 ; Take Branch BRA _BR_ERR _BGT_OK1 LDL R2,#$01 TFR CCR,R2 ; Negative=0, Zero=0, Overflow=0, Carry=1 BGT _BGT_OK2 ; Take Branch BRA _BR_ERR _BGT_OK2 LDL R2,#$0e TFR CCR,R2 ; Negative=1, Zero=1, Overflow=1, Carry=0 BGT _BR_ERR ; Don't take branch LDL R2,#$02 TFR CCR,R2 ; Negative=0, Zero=0, Overflow=1, Carry=0 BGT _BR_ERR ; Don't take branch LDL R2,#$08 TFR CCR,R2 ; Negative=1, Zero=0, Overflow=0, Carry=0 BGT _BR_ERR ; Don't take branch BRA BRA_FWARD _BR_ERR LDL R2,#$04 ; Sent Message to Testbench Error Register LDH R2,#$80 LDL R3,#$0a STB R3,(R2,#0) SIF RTS _BRA_OK LDL R2,#$00 ; Sent Message to Testbench Check Point Register LDH R2,#$80 LDL R3,#$0a STB R3,(R2,#0) SIF RTS BRA_FWARD BRA _BRA_OK ; Test backward branch caculation ;------------------------------------------------------------------------------- ; Test Subroutine Call and return instructions ;------------------------------------------------------------------------------- _START6 LDL R2,#$00 ; Sent Message to Testbench Check Point Register LDH R2,#$80 LDL R3,#$0b ; Checkpoint Value STB R3,(R2,#0) LDL R3,#$06 ; Thread Value STB R3,(R2,#2) ; Send Message to clear Testbench interrupt register LDL R4,#$00 TFR R5,PC ; Subroutine Call BRA SUB_TST RET_SUB LDL R2,#$00 ; Sent Message to Testbench Check Point Register LDH R2,#$80 LDL R3,#$0c STB R3,(R2,#0) SIF RTS _FAIL6 LDL R2,#$04 ; Sent Message to Testbench Error Register LDH R2,#$80 LDL R3,#$0c STB R3,(R2,#0) SIF RTS SUB_TST LDL R4,#$88 ; If we branch to far then the wrong data will get loaded LDH R4,#$99 ; and we'll make a bad compare to cause test to fail LDL R7,#$88 ; R7=$0088 LDH R7,#$99 ; R7=$9988 SUB R0,R7,R4 ; Compare R7 to R4 BNE _FAIL6 JAL R5 ; Jump to return address ;------------------------------------------------------------------------------- ; Test 16 bit Addition and Substract instructions ;------------------------------------------------------------------------------- _START7 LDL R2,#$00 ; Sent Message to Testbench Check Point Register LDH R2,#$80 LDL R3,#$0d ; Checkpoint Value STB R3,(R2,#0) LDL R3,#$07 ; Thread Value STB R3,(R2,#2) ; Send Message to clear Testbench interrupt register ;Test SUB instruction LDL R4,#$0f ; R4=$000f LDH R4,#$01 ; R4=$010f LDL R7,#$0e ; R7=$000e LDH R7,#$01 ; R7=$010e LDL R2,#$0f TFR CCR,R2 ; Negative=1, Zero=1, Overflow=1, Carry=1 SUB R1,R4,R7 ; R4 - R7 => R1 BMI _FAIL7 ; Negative Flag should be clear BEQ _FAIL7 ; Zero Flag should be clear BVS _FAIL7 ; Overflow Flag should be clear BCS _FAIL7 ; Carry Flag should be clear LDL R3,#$01 ; R3=$0001 SUB R0,R1,R3 ; Compare R1 to R3 BNE _FAIL7 LDL R7,#$0f ; R7=$000f LDH R7,#$01 ; R7=$010f LDL R2,#$0b TFR CCR,R2 ; Negative=1, Zero=0, Overflow=1, Carry=1 SUB R1,R4,R7 ; R4 - R7 => R1 BMI _FAIL7 ; Negative Flag should be clear BNE _FAIL7 ; Zero Flag should be set BVS _FAIL7 ; Overflow Flag should be clear BCS _FAIL7 ; Carry Flag should be clear ;Test SBC instruction LDL R4,#$11 ; R4=$0011 LDH R4,#$01 ; R4=$0111 LDL R7,#$0e ; R7=$000e LDH R7,#$01 ; R7=$010e LDL R2,#$0f TFR CCR,R2 ; Negative=1, Zero=1, Overflow=1, Carry=1 SBC R1,R4,R7 ; R4 - R7 => R1 BMI _FAIL7 ; Negative Flag should be clear BEQ _FAIL7 ; Zero Flag should be clear BVS _FAIL7 ; Overflow Flag should be clear BCS _FAIL7 ; Carry Flag should be clear LDL R3,#$02 ; R3=$0002 SUB R0,R1,R3 ; Compare R1 to R3 BNE _FAIL7 LDL R4,#$0f ; R4=$000f LDH R4,#$01 ; R4=$010f LDL R7,#$0f ; R7=$000f LDH R7,#$01 ; R7=$010f LDL R2,#$0a TFR CCR,R2 ; Negative=1, Zero=0, Overflow=1, Carry=0 SBC R1,R4,R7 ; R4 - R7 => R1 BMI _FAIL7 ; Negative Flag should be clear BEQ _FAIL7 ; Zero Flag should be clear BVS _FAIL7 ; Overflow Flag should be clear BCS _FAIL7 ; Carry Flag should be clear ;Test ADD instruction LDL R4,#$0f ; R4=$000f LDH R4,#$70 ; R4=$700f LDL R7,#$01 ; R7=$0001 LDH R7,#$10 ; R7=$1001 LDL R2,#$05 TFR CCR,R2 ; Negative=0, Zero=1, Overflow=0, Carry=1 ADD R1,R4,R7 ; R4 + R7 => R1 BPL _FAIL7 ; Negative Flag should be set BEQ _FAIL7 ; Zero Flag should be clear BVC _FAIL7 ; Overflow Flag should be set BCS _FAIL7 ; Carry Flag should be clear LDL R3,#$10 ; R3=$0010 LDH R3,#$80 ; R3=$8010 SUB R0,R1,R3 ; Compare R1 to R3 BNE _FAIL7 LDL R4,#$00 ; R4=$0000 LDH R4,#$80 ; R4=$8000 LDL R7,#$00 ; R7=$0000 LDH R7,#$80 ; R7=$8000 LDL R2,#$0f TFR CCR,R2 ; Negative=1, Zero=1, Overflow=0, Carry=0 ADD R1,R4,R7 ; R4 + R7 => R1 BMI _FAIL7 ; Negative Flag should be clear BNE _FAIL7 ; Zero Flag should be set BVC _FAIL7 ; Overflow Flag should be set BCC _FAIL7 ; Carry Flag should be set SUB R0,R1,R0 ; Compare R1 to R0(Zero) BNE _FAIL7 ;Test ADC instruction LDL R4,#$0f ; R4=$000f LDH R4,#$70 ; R4=$700f LDL R7,#$01 ; R7=$0001 LDH R7,#$10 ; R7=$1001 LDL R2,#$05 TFR CCR,R2 ; Negative=0, Zero=1, Overflow=0, Carry=1 ADC R1,R4,R7 ; R4 + R7 => R1 BPL _FAIL7 ; Negative Flag should be set BEQ _FAIL7 ; Zero Flag should be clear BVC _FAIL7 ; Overflow Flag should be set BCS _FAIL7 ; Carry Flag should be clear LDL R3,#$11 ; R3=$0011 LDH R3,#$80 ; R3=$8011 SUB R0,R1,R3 ; Compare R1 to R3 BNE _FAIL7 LDL R4,#$00 ; R4=$0000 LDH R4,#$80 ; R4=$8000 LDL R7,#$00 ; R7=$0000 LDH R7,#$80 ; R7=$8000 LDL R2,#$0c TFR CCR,R2 ; Negative=1, Zero=1, Overflow=0, Carry=0 ADC R1,R4,R7 ; R4 + R7 => R1 BMI _FAIL7 ; Negative Flag should be clear BNE _FAIL7 ; Zero Flag should be set BVC _FAIL7 ; Overflow Flag should be set BCC _FAIL7 ; Carry Flag should be set SUB R0,R1,R0 ; Compare R1 to R0(Zero) BNE _FAIL7 _END_7 LDL R2,#$00 ; Sent Message to Testbench Check Point Register LDH R2,#$80 LDL R3,#$0e STB R3,(R2,#0) SIF RTS _FAIL7 LDL R2,#$04 ; Sent Message to Testbench Error Register LDH R2,#$80 LDL R3,#$0e STB R3,(R2,#0) SIF RTS ;------------------------------------------------------------------------------- ; Test 8 bit Addition and Substract instructions ;------------------------------------------------------------------------------- _START8 LDL R2,#$00 ; Sent Message to Testbench Check Point Register LDH R2,#$80 LDL R3,#$0f ; Checkpoint Value STB R3,(R2,#0) LDL R3,#$08 ; Thread Value STB R3,(R2,#2) ; Send Message to clear Testbench interrupt register ;Test SUBL instruction LDL R5,#$0f ; R5=$000f LDL R2,#$0f TFR CCR,R2 ; Negative=1, Zero=1, Overflow=1, Carry=1 SUBL R5,#$0e ; R5 - $0e => R5 BMI _FAIL8 ; Negative Flag should be clear BEQ _FAIL8 ; Zero Flag should be clear BVS _FAIL8 ; Overflow Flag should be clear BCS _FAIL8 ; Carry Flag should be clear LDL R3,#$01 ; R3=$0001 SUB R0,R5,R3 ; Compare R5 to R3 BNE _FAIL8 LDL R7,#$0f ; R7=$000f LDL R2,#$0d TFR CCR,R2 ; Negative=1, Zero=1, Overflow=1, Carry=0 SUBL R7,#$10 ; R7 - $10 => R7 BPL _FAIL8 ; Negative Flag should be set BEQ _FAIL8 ; Zero Flag should be clear BVS _FAIL8 ; Overflow Flag should be clear BCC _FAIL8 ; Carry Flag should be set CMPL R7,#$FF ; Result should be -1 or $FFFF CPCH R7,#$FF BNE _FAIL8 ;Test SUBH instruction LDL R6,#$11 ; R4=$0011 LDH R6,#$81 ; R4=$8111 LDL R2,#$0d TFR CCR,R2 ; Negative=1, Zero=1, Overflow=0, Carry=1 SUBH R6,#$70 ; R6 - $70 => R6 BMI _FAIL8 ; Negative Flag should be clear BEQ _FAIL8 ; Zero Flag should be clear BVC _FAIL8 ; Overflow Flag should be set BCS _FAIL8 ; Carry Flag should be clear LDL R3,#$11 ; R3=$0011 LDH R3,#$11 ; R3=$1111 SUB R0,R6,R3 ; Compare R6 to R3 BNE _FAIL8 LDL R6,#$00 ; R6=$0000 LDH R6,#$01 ; R6=$0100 LDL R2,#$06 TFR CCR,R2 ; Negative=0, Zero=1, Overflow=1, Carry=0 SUBH R6,#$02 ; R6 - $70 => R6 BPL _FAIL8 ; Negative Flag should be set BEQ _FAIL8 ; Zero Flag should be clear BVS _FAIL8 ; Overflow Flag should be clear BCC _FAIL8 ; Carry Flag should be set ;Test CMPL instruction LDL R5,#$0f ; R5=$000f LDL R2,#$0b TFR CCR,R2 ; Negative=1, Zero=0, Overflow=1, Carry=1 CMPL R5,#$0f ; R5 - $0f => R5 BMI _FAIL8 ; Negative Flag should be clear BNE _FAIL8 ; Zero Flag should be set BVS _FAIL8 ; Overflow Flag should be clear BCS _FAIL8 ; Carry Flag should be clear LDL R7,#$0f ; R7=$000f LDL R2,#$07 TFR CCR,R2 ; Negative=0, Zero=1, Overflow=1, Carry=1 CMPL R7,#$10 ; R7 - $10 => R7 BPL _FAIL8 ; Negative Flag should be set BEQ _FAIL8 ; Zero Flag should be clear BVS _FAIL8 ; Overflow Flag should be clear BCC _FAIL8 ; Carry Flag should be set ;Test CPCH instruction LDL R5,#$00 ; R5=$0000 LDH R5,#$01 ; R5=$0001 LDL R2,#$0f TFR CCR,R2 ; Negative=1, Zero=1, Overflow=1, Carry=1 CPCH R5,#$00 ; R5 - $00 - carryflag => nowhere BMI _FAIL8 ; Negative Flag should be clear BNE _FAIL8 ; Zero Flag should be set BVS _FAIL8 ; Overflow Flag should be clear BCS _FAIL8 ; Carry Flag should be clear LDL R2,#$06 TFR CCR,R2 ; Negative=0, Zero=1, Overflow=1, Carry=0 CPCH R5,#$02 ; R5 - $00 - carryflag => nowhere BPL _FAIL8 ; Negative Flag should be set BEQ _FAIL8 ; Zero Flag should be clear BVS _FAIL8 ; Overflow Flag should be clear BCC _FAIL8 ; Carry Flag should be set ;Test ADDH instruction LDL R5,#$0f ; R5=$000f LDH R5,#$70 ; R5=$700f LDL R2,#$0e TFR CCR,R2 ; Negative=1, Zero=1, Overflow=1, Carry=0 ADDH R5,#$a0 ; R5 + $a0 => R5 BMI _FAIL8 ; Negative Flag should be clear BEQ _FAIL8 ; Zero Flag should be clear BVS _FAIL8 ; Overflow Flag should be clear BCC _FAIL8 ; Carry Flag should be set LDL R3,#$0f ; R3=$000f LDH R3,#$10 ; R3=$100f SUB R0,R5,R3 ; Compare R5 to R3 BNE _FAIL8 LDL R2,#$07 TFR CCR,R2 ; Negative=0, Zero=1, Overflow=1, Carry=1 ADDH R5,#$70 ; R5 + $70 => R5 BPL _FAIL8 ; Negative Flag should be set BEQ _FAIL8 ; Zero Flag should be clear BVC _FAIL8 ; Overflow Flag should be set BCS _FAIL8 ; Carry Flag should be clear LDL R3,#$0f ; R3=$000f LDH R3,#$80 ; R3=$800f SUB R0,R5,R3 ; Compare R5 to R3 BNE _FAIL8 ;Test ADDL instruction LDL R4,#$ff ; R4=$00ff LDH R4,#$70 ; R4=$70ff LDL R2,#$0e TFR CCR,R2 ; Negative=1, Zero=1, Overflow=1, Carry=0 ADDL R4,#$01 ; R4 + $01 => R4 BMI _FAIL8 ; Negative Flag should be clear BEQ _FAIL8 ; Zero Flag should be clear BVS _FAIL8 ; Overflow Flag should be clear BCC _FAIL8 ; Carry Flag should be set LDL R5,#$00 ; R5=$0000 LDH R5,#$71 ; R5=$7100 SUB R0,R4,R5 ; Compare R4 to R5 BNE _FAIL8 LDL R4,#$8e ; R4=$008e LDH R4,#$7f ; R4=$7f8e LDL R2,#$0c TFR CCR,R2 ; Negative=1, Zero=1, Overflow=0, Carry=0 ADDL R4,#$81 ; R4 + $81 => R4 BPL _FAIL8 ; Negative Flag should be set BEQ _FAIL8 ; Zero Flag should be clear BVC _FAIL8 ; Overflow Flag should be set BCC _FAIL8 ; Carry Flag should be set LDL R6,#$0f ; R6=$000f LDH R6,#$80 ; R6=$800f SUB R0,R4,R6 ; Compare R4 to R6 BNE _FAIL8 _END_8 LDL R2,#$00 ; Sent Message to Testbench Check Point Register LDH R2,#$80 LDL R3,#$10 STB R3,(R2,#0) SIF RTS _FAIL8 LDL R2,#$00 ; Sent Message to Testbench Error Register LDH R2,#$80 LDL R3,#$10 STB R3,(R2,#4) SIF RTS ;------------------------------------------------------------------------------- ; Test Load and Store instructions ;------------------------------------------------------------------------------- _START9 LDL R2,#$00 ; Sent Message to Testbench Check Point Register LDH R2,#$80 LDL R3,#$11 ; Checkpoint Value STB R3,(R2,#0) LDL R3,#$09 ; Thread Value STB R3,(R2,#2) ; Send Message to clear Testbench interrupt register LDL R1,#$aa ; R1=$00aa LDH R1,#$7f ; R1=$7faa LDL R2,#$55 ; R2=$0055 LDH R2,#$6f ; R2=$6f55 LDL R3,#$66 ; R3=$0066 LDH R3,#$5f ; R3=$5f66 LDL R7,#$ff ; R7=$00ff LDH R7,#$ff ; R7=$ffff ;Test STB/LDB instruction STB R1,(R0,#$00) ; STB R2,(R0,#$01) ; STB R3,(R0,#$1f) ; LDL R4,#$00 ; R4=$0000 LDB R5,(R4,#$00) ; LDB R6,(R4,#$01) ; LDB R7,(R4,#$1f) ; CMPL R5,#$aa ; BNE _FAIL9 CMPL R6,#$55 ; BNE _FAIL9 CMPL R7,#$66 ; BNE _FAIL9 LDL R6,#$66 ; R6=$0066 CMP R6,R7 ; Make sure the high byte has been cleared BNE _FAIL9 ;Test STW/LDW instruction STW R1,(R0,#$04) ; Should be even offsets STW R2,(R0,#$06) ; STW R3,(R0,#$0a) ; LDL R4,#$00 ; R4=$0000 LDL R5,#$00 ; R5=$0000 LDL R6,#$00 ; R6=$0000 LDL R7,#$00 ; R7=$0000 LDW R5,(R4,#$04) ; LDW R6,(R4,#$06) ; LDW R7,(R4,#$0a) ; CMP R1,R5 ; BNE _FAIL9 CMP R2,R6 ; BNE _FAIL9 CMP R3,R7 ; BNE _FAIL9 ;Test STB/LDB instruction LDL R1,#$cc ; R1=$00cc LDH R1,#$1f ; R1=$1f66 LDL R2,#$99 ; R2=$0099 LDH R2,#$2f ; R2=$2f99 LDL R4,#$20 ; R4=$0020 - Base Address LDL R5,#$02 ; R5=$0002 - even offset LDL R6,#$07 ; R6=$0007 - odd offset STB R1,(R4,R5) ; STB R2,(R4,R6) ; LDB R5,(R4,R5) ; LDB R6,(R4,R6) ; CMPL R5,#$cc ; BNE _FAIL9 LDL R3,#$99 ; R3=$0099 CMP R3,R6 ; Make sure the high byte has been cleared BNE _FAIL9 ;Test STW/LDW instruction LDL R1,#$cc ; R1=$00cc LDH R1,#$1f ; R1=$1f66 LDL R2,#$99 ; R2=$0099 LDH R2,#$2f ; R2=$2f99 LDL R4,#$30 ; R3=$0030 - Base Address LDL R5,#$02 ; R5=$0002 LDL R6,#$08 ; R6=$0008 STW R1,(R4,R5) ; STW R2,(R4,R6) ; LDW R5,(R4,R5) ; LDW R6,(R4,R6) ; CMP R5,R1 ; BNE _FAIL9 CMP R6,R2 ; BNE _FAIL9 ;Test STB/LDB instruction LDL R1,#$33 ; R1=$0033 LDH R1,#$1f ; R1=$1f33 LDL R2,#$55 ; R2=$0055 LDH R2,#$2f ; R2=$2f55 LDL R4,#$40 ; R4=$0040 - Base Address LDL R5,#$02 ; R5=$0002 - even offset LDL R6,#$07 ; R6=$0007 - odd offset STB R1,(R4,R5+) ; STB R2,(R4,R6+) ; CMPL R5,#$03 ; Test for 1 byte increment BNE _FAIL9 CMPL R6,#$08 ; Test for 1 byte increment BNE _FAIL9 LDB R3,(R4,-R5) ; LDB R7,(R4,-R6) ; CMPL R5,#$02 ; Test for 1 byte decrement BNE _FAIL9 CMPL R6,#$07 ; Test for 1 byte decrement BNE _FAIL9 CMPL R3,#$33 ; BNE _FAIL9 LDL R3,#$55 ; R3=$0055 CMP R3,R7 ; Make sure the high byte has been cleared BNE _FAIL9 ;Test STB/LDB instruction LDL R1,#$66 ; R1=$0066 LDH R1,#$1f ; R1=$1f66 LDL R2,#$99 ; R2=$0099 LDH R2,#$2f ; R2=$2f99 LDL R4,#$50 ; R4=$0050 - Base Address LDL R5,#$04 ; R5=$0004 - even offset LDL R6,#$09 ; R6=$0009 - odd offset STB R1,(R4,-R5) ; STB R2,(R4,-R6) ; CMPL R5,#$03 ; Test for 1 byte decrement BNE _FAIL9 CMPL R6,#$08 ; Test for 1 byte decrement BNE _FAIL9 LDB R3,(R4,R5+) ; LDB R7,(R4,R6+) ; CMPL R5,#$04 ; Test for 1 byte increment BNE _FAIL9 CMPL R6,#$09 ; Test for 1 byte increment BNE _FAIL9 CMPL R3,#$66 ; BNE _FAIL9 LDL R3,#$99 ; R3=$0099 CMP R3,R7 ; Make sure the high byte has been cleared BNE _FAIL9 ;Test STW/LDW instruction LDL R1,#$aa ; R1=$00aa LDH R1,#$1f ; R1=$1faa LDL R2,#$cc ; R2=$00cc LDH R2,#$2f ; R2=$2fcc LDL R4,#$60 ; R4=$0060 - Base Address LDL R5,#$02 ; R5=$0002 - even offset LDL R6,#$08 ; R6=$0008 STW R1,(R4,R5+) ; STW R2,(R4,R6+) ; CMPL R5,#$04 ; Test for 2 byte increment BNE _FAIL9 CMPL R6,#$0a ; Test for 2 byte increment BNE _FAIL9 LDW R3,(R4,-R5) ; LDW R7,(R4,-R6) ; CMPL R5,#$02 ; Test for 2 byte decrement BNE _FAIL9 CMPL R6,#$08 ; Test for 2 byte decrement BNE _FAIL9 CMP R1,R3 ; BNE _FAIL9 CMP R2,R7 ; BNE _FAIL9 _END_9 LDL R2,#$00 ; Sent Message to Testbench Check Point Register LDH R2,#$80 LDL R3,#$12 STB R3,(R2,#0) SIF RTS _FAIL9 LDL R2,#$04 ; Sent Message to Testbench Error Register LDH R2,#$80 LDL R3,#$12 STB R3,(R2,#0) SIF RTS ;------------------------------------------------------------------------------- ; Test Semaphore instructions ;------------------------------------------------------------------------------- _START10 LDL R2,#$00 ; Sent Message to Testbench Check Point Register LDH R2,#$80 LDL R3,#$13 ; Checkpoint Value STB R3,(R2,#0) LDL R3,#$0a ; Thread Value STB R3,(R2,#2) ; Send Message to clear Testbench interrupt register LDL R1,#$5 ; R1=$0005 ;Test SSEM instruction SSEM #7 ; semaphores BCC _FAIL10 ; Should be set SSEM R1 ; semaphores BCC _FAIL10 ; Should be set SSEM #6 ; semaphore has been set by host BCS _FAIL10 ; Should be clear CSEM #7 ; semaphore CSEM R1 ; semaphore #5 ; Host will test that these semaphores are clear SSEM #3 ; set this semaphore for the host to test _END_10 LDL R2,#$00 ; Sent Message to Testbench Check Point Register LDH R2,#$80 LDL R3,#$14 STB R3,(R2,#0) SIF RTS _FAIL10 LDL R2,#$04 ; Sent Message to Testbench Error Register LDH R2,#$80 LDL R3,#$14 STB R3,(R2,#0) SIF RTS ;------------------------------------------------------------------------------- ;------------------------------------------------------------------------------- TFR R2,CCR ; R2 = CCR ;empty line BACK_ SIF R7 BRK ORG $8000 ; Special Testbench Addresses _BENCH DS.W 8
Go to most recent revision | Compare with Previous | Blame | View Log