OpenCores
URL https://opencores.org/ocsvn/xmatchpro/xmatchpro/trunk

Subversion Repositories xmatchpro

[/] [xmatchpro/] [trunk/] [xmw4-comdec/] [xmatch_sim7/] [coregen/] [DP_RAM_XILINX_512/] [simulation/] [addr_gen.vhd] - Rev 9

Compare with Previous | Blame | View Log

 
--------------------------------------------------------------------------------
--
-- BLK MEM GEN v7_3 Core - Address Generator
--
--------------------------------------------------------------------------------
--
-- (c) Copyright 2006_3010 Xilinx, Inc. All rights reserved.
--
-- This file contains confidential and proprietary information
-- of Xilinx, Inc. and is protected under U.S. and
-- international copyright and other intellectual property
-- laws.
--
-- DISCLAIMER
-- This disclaimer is not a license and does not grant any
-- rights to the materials distributed herewith. Except as
-- otherwise provided in a valid license issued to you by
-- Xilinx, and to the maximum extent permitted by applicable
-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND
-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
-- (2) Xilinx shall not be liable (whether in contract or tort,
-- including negligence, or under any other theory of
-- liability) for any loss or damage of any kind or nature
-- related to, arising under or in connection with these
-- materials, including for any direct, or any indirect,
-- special, incidental, or consequential loss or damage
-- (including loss of data, profits, goodwill, or any type of
-- loss or damage suffered as a result of any action brought
-- by a third party) even if such damage or loss was
-- reasonably foreseeable or Xilinx had been advised of the
-- possibility of the same.
--
-- CRITICAL APPLICATIONS
-- Xilinx products are not designed or intended to be fail-
-- safe, or for use in any application requiring fail-safe
-- performance, such as life-support or safety devices or
-- systems, Class III medical devices, nuclear facilities,
-- applications related to the deployment of airbags, or any
-- other applications that could lead to death, personal
-- injury, or severe property or environmental damage
-- (individually and collectively, "Critical
-- Applications"). Customer assumes the sole risk and
-- liability of any use of Xilinx products in Critical
-- Applications, subject only to applicable laws and
-- regulations governing limitations on product liability.
--
-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
-- PART OF THIS FILE AT ALL TIMES.
 
--------------------------------------------------------------------------------
--
-- Filename: addr_gen.vhd
--
-- Description:
--   Address Generator
--
--------------------------------------------------------------------------------
-- Author: IP Solutions Division
--
-- History: Sep 12, 2011 - First Release
--------------------------------------------------------------------------------
--
--------------------------------------------------------------------------------
-- Library Declarations
--------------------------------------------------------------------------------
 
LIBRARY IEEE;
USE IEEE.STD_LOGIC_1164.ALL;
USE IEEE.STD_LOGIC_ARITH.ALL;
USE IEEE.STD_LOGIC_UNSIGNED.ALL;
 
LIBRARY work;
USE work.ALL;
 
ENTITY ADDR_GEN IS
  GENERIC ( C_MAX_DEPTH : INTEGER :=  1024 ;
            RST_VALUE  : STD_LOGIC_VECTOR(31 DOWNTO 0) := (OTHERS=> '0');
            RST_INC  : INTEGER := 0);
  PORT (
        CLK         : IN STD_LOGIC;
        RST         : IN STD_LOGIC;
        EN          : IN STD_LOGIC;
        LOAD        :IN STD_LOGIC;
        LOAD_VALUE  : IN STD_LOGIC_VECTOR (31 DOWNTO 0)  := (OTHERS => '0');
        ADDR_OUT    : OUT STD_LOGIC_VECTOR (31 DOWNTO 0)   --OUTPUT VECTOR           
  );
END ADDR_GEN;
 
ARCHITECTURE BEHAVIORAL OF ADDR_GEN IS
   SIGNAL ADDR_TEMP : STD_LOGIC_VECTOR(31 DOWNTO 0) := (OTHERS =>'0');
BEGIN
   ADDR_OUT <= ADDR_TEMP;
   PROCESS(CLK)
   BEGIN
      IF(RISING_EDGE(CLK)) THEN
         IF(RST='1') THEN
    	    ADDR_TEMP<= RST_VALUE + conv_std_logic_vector(RST_INC,32 ); 
         ELSE
            IF(EN='1') THEN
               IF(LOAD='1') THEN
	              ADDR_TEMP <=LOAD_VALUE;
	           ELSE
	              IF(ADDR_TEMP = C_MAX_DEPTH-1) THEN
         	         ADDR_TEMP<= RST_VALUE + conv_std_logic_vector(RST_INC,32 );
	              ELSE
	                 ADDR_TEMP <= ADDR_TEMP + '1';
	              END IF;
	           END IF;
	        END IF;
         END IF;
      END IF;
   END PROCESS;
END ARCHITECTURE;
 

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.