OpenCores
URL https://opencores.org/ocsvn/xulalx25soc/xulalx25soc/trunk

Subversion Repositories xulalx25soc

[/] [xulalx25soc/] [trunk/] [Makefile] - Rev 33

Go to most recent revision | Compare with Previous | Blame | View Log

################################################################################
##
## Filename:    
##
## Project:     XuLA2 board
##
## Purpose:     
##
##
## Creator:     Dan Gisselquist, Ph.D.
##              Gisselquist Technology, LLC
##
################################################################################
##
## Copyright (C) 2015, Gisselquist Technology, LLC
##
## This program is free software (firmware): you can redistribute it and/or
## modify it under the terms of  the GNU General Public License as published
## by the Free Software Foundation, either version 3 of the License, or (at
## your option) any later version.
##
## This program is distributed in the hope that it will be useful, but WITHOUT
## ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
## for more details.
##
## License:     GPL, v3, as defined and found on www.gnu.org,
##              http:##www.gnu.org/licenses/gpl.html
##
##
################################################################################
##
##
.PHONY: all
all:    datestamp verilated bit
# Could also depend upon load, if desired, but not necessary
BENCH := `find bench -name Makefile` `find bench -name "*.cpp"` `find bench -name "*.h"`
RTL   := `find rtl -name "*.v"` `find rtl -name Makefile`
NOTES := `find . -name "*.txt"` `find . -name "*.html"`
SW    := `find sw -name "*.cpp"` `find sw -name "*.h"`  \
        `find sw -name "*.sh"` `find sw -name "*.py"`   \
        `find sw -name "*.pl"` `find sw -name Makefile`
PROJ  := xilinx/xula.prj xilinx/xula.xise xilinx/xula.xst       \
        xilinx/xula.ut xilinx/Makefile
BIN  := `find xilinx -name "*.bit"`
CONSTRAINTS := xula.ucf
YYMMDD:=`date +%Y%m%d`

datestamp:      $(YYMMDD)-build.v
$(YYMMDD)-build.v:
        -rm -rf 2*-build.v
        perl xilinx/mkdatev.pl > $(YYMMDD)-build.v
        cd rtl; ln -fs ../$(YYMMDD)-build.v builddate.v

.PHONY: archive
archive:
        tar --transform s,^,$(YYMMDD)-xula/, -chjf $(YYMMDD)-xula.tjz $(BENCH) $(SW) $(RTL) $(NOTES) $(PROJ) $(BIN) $(CONSTRAINTS)

.PHONY: tare
tare:
        echo tar --transform s,^,$(YYMMDD)-xula/, -chjf $(YYMMDD)-xula.tjz $(BENCH) $(SW) $(RTL) $(NOTES) $(PROJ) $(BIN) $(CONSTRAINTS)

.PHONY: verilated
verilated:
        cd rtl ; make

.PHONY: bit
bit:
        cd xilinx ; make xula.bit

.PHONY: load    
load:   bit
        xsload -b xula2-lx25 --fpga xilinx/xula.bit
        
.PHONY: xload   
xload:  
        xsload -b xula2-lx25 --fpga xilinx/toplevel.bit

.PHONY: timing
timing:
        cd xilinx ; make timing


Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.