Subversion Repositories xulalx25soc

//
//
// Filename:	busmaster_tb.cpp
//
// Project:	FPGA library development (XuLA2 development board)
//
// Purpose:	This is piped version of the testbench for the busmaster
//		verilog code.  The busmaster code is designed to be a complete
//		code set implementing all of the functionality of the XESS
//		XuLA2 development board.  If done well, the programs talking to
//		this one should be able to talk to the board and apply the
//		same tests to the board itself.
//
// Creator:	Dan Gisselquist
//		Gisselquist Tecnology, LLC
//
// Copyright:	2015
//
//
#include <signal.h>
#include <time.h>
 
#include "verilated.h"
#include "Vbusmaster.h"
 
#include "testb.h"
// #include "twoc.h"
#include "pipecmdr.h"
#include "qspiflashsim.h"
#include "sdramsim.h"
 
#include "port.h"
 
// Add a reset line, since Vbusmaster doesn't have one
class	Vbusmasterr : public Vbusmaster {
public:
	int	i_rst;
	virtual	~Vbusmasterr() {}
};
 
// No particular "parameters" need definition or redefinition here.
class	BUSMASTER_TB : public PIPECMDR<Vbusmasterr> {
public:
	unsigned long	m_tx_busy_count;
	QSPIFLASHSIM	m_flash;
	SDRAMSIM	m_sdram;
	unsigned	m_last_led;
	time_t		m_start_time;
 
	BUSMASTER_TB(void) : PIPECMDR(FPGAPORT) {
		m_start_time = time(NULL);
	}
 
	void	reset(void) {
		m_core->i_clk = 1;
		m_core->eval();
	}
 
	void	tick(void) {
		if ((m_tickcount & ((1<<28)-1))==0) {
			double	ticks_per_second = m_tickcount;
			ticks_per_second /= (double)(time(NULL) - m_start_time);
			printf(" ********   %.6f TICKS PER SECOND\n", 
				ticks_per_second);
		}
 
		// Set up the bus before any clock tick
		m_core->i_clk = 1;
		m_core->i_spi_miso = m_flash(m_core->o_sf_cs_n,
						m_core->o_spi_sck,
						m_core->o_spi_mosi)&0x02;
		m_core->i_ram_data = m_sdram(1,
				m_core->o_ram_cke, m_core->o_ram_cs_n,
				m_core->o_ram_ras_n, m_core->o_ram_cas_n,
				m_core->o_ram_we_n, m_core->o_ram_bs,
				m_core->o_ram_addr, m_core->o_ram_drive_data,
				m_core->o_ram_data);
		PIPECMDR::tick();
 
		bool	writeout = false;
		/*
		if (m_core->v__DOT__runio__DOT__themouse__DOT__driver__DOT__rx_stb)
			writeout = true;
		else if (m_core->v__DOT__runio__DOT__themouse__DOT__driver__DOT__ps2iface__DOT__state != m_last_ps2_state)
			writeout = true;
		else if (m_core->v__DOT__runio__DOT__themouse__DOT__m_state != m_last_mouse_state)
			writeout = true;
		else if (m_core->i_ps2 != m_last_ps2)
			writeout = true;
		else if (m_core->o_ps2 != m_last_ops2)
			writeout = true;
		else if (m_core->v__DOT__runio__DOT__themouse__DOT__driver__DOT__ps2_perr)
			writeout = true;
		else if (m_core->v__DOT__runio__DOT__themouse__DOT__driver__DOT__ps2_ferr)
			writeout = true;
		*/
		// if ((m_core->v__DOT__genbus__DOT__runwb__DOT__o_wb_cyc)||(m_core->v__DOT__bus_cyc))
			// writeout = true;
		// else if (m_last_cyc)
			// writeout = true;
		if ((m_tickcount > 0x5010)&&(m_core->v__DOT__sdram__DOT__r_state != 0))
			writeout = true;
		else if ((m_core->v__DOT__dwb_cyc)&&((m_core->v__DOT__wb_stb)
				||(m_core->v__DOT__dwb_stall)
				||(m_core->v__DOT__dwb_ack)))
			writeout = true;
		else if (m_core->v__DOT__dwb_cyc)
			writeout = true;
		else if (m_core->v__DOT__sdram__DOT__need_refresh)
			writeout = true;
		else if ((m_core->v__DOT__wbu_cyc)&&((m_core->v__DOT__wbu_addr == 0x106)||(m_core->v__DOT__wbu_addr == 0x0107)))
			writeout = true;
		if (m_tickcount < 0x05010)
			writeout = false;
		if (writeout) {
			printf("%08lx:", m_tickcount);
 
			printf("(%d,%d->%d),(%d,%d->%d)|%c[%08x/%08x]@%08x %d%d%c",
				m_core->v__DOT__wbu_cyc,
				m_core->v__DOT__dwb_cyc, // was zip_cyc
				m_core->v__DOT__wb_cyc,
				//
				m_core->v__DOT__wbu_stb,
				// 0, // m_core->v__DOT__dwb_stb, // was zip_stb
				m_core->v__DOT__zippy__DOT__thecpu__DOT__mem_stb_gbl,
				m_core->v__DOT__wb_stb,
				//
				(m_core->v__DOT__wb_we)?'W':'R',
				m_core->v__DOT__wb_data,
					m_core->v__DOT__dwb_idata,
				m_core->v__DOT__wb_addr,
				m_core->v__DOT__dwb_ack,
				m_core->v__DOT__dwb_stall,
				(m_core->v__DOT__wb_err)?'E':'.');
 
			printf("%c[%d%d%d%d,%d:%04x%c]@%06x(%d) ->%06x%c",
				(m_core->v__DOT__sdram_sel)?'!':' ',
				m_core->o_ram_cs_n, m_core->o_ram_ras_n,
				m_core->o_ram_cas_n, m_core->o_ram_we_n,
				m_core->o_ram_bs, m_core->o_ram_data,
				(m_core->o_ram_drive_data)?'D':'-',
				m_core->o_ram_addr,
					(m_core->o_ram_addr>>10)&1,
				m_core->i_ram_data,
				(m_core->o_ram_drive_data)?'-':'V');
 
			printf(" SD[%d,%d-%3x%d]",
				m_core->v__DOT__sdram__DOT__r_state,
				m_sdram.pwrup(),
				m_core->v__DOT__sdram__DOT__refresh_clk,
				m_core->v__DOT__sdram__DOT__need_refresh);
 
			printf(" BNK[%d:%6x,%d:%6x,%d:%6x,%d:%6x],%x%d",
				m_core->v__DOT__sdram__DOT__bank_active[0],
				m_core->v__DOT__sdram__DOT__bank_row[0],
				m_core->v__DOT__sdram__DOT__bank_active[1],
				m_core->v__DOT__sdram__DOT__bank_row[1],
				m_core->v__DOT__sdram__DOT__bank_active[2],
				m_core->v__DOT__sdram__DOT__bank_row[2],
				m_core->v__DOT__sdram__DOT__bank_active[3],
				m_core->v__DOT__sdram__DOT__bank_row[3],
				m_core->v__DOT__sdram__DOT__clocks_til_idle,
				m_core->v__DOT__sdram__DOT__r_barrell_ack);
 
			printf(" %s%s%c[%08x@%06x]",
				(m_core->v__DOT__sdram__DOT__bus_cyc)?"C":" ",
				(m_core->v__DOT__sdram__DOT__r_pending)?"PND":"   ",
				(m_core->v__DOT__sdram__DOT__r_we)?'W':'R',
				(m_core->v__DOT__sdram__DOT__r_data),
				(m_core->v__DOT__sdram__DOT__r_addr));
 
			printf("%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%2x",
				(m_core->v__DOT__zippy__DOT__dbg_ack)?"A":"-",
				(m_core->v__DOT__zippy__DOT__dbg_stall)?"S":"-",
				(m_core->v__DOT__zippy__DOT__sys_dbg_cyc)?"D":"-",
				(m_core->v__DOT__zippy__DOT__cpu_lcl_cyc)?"L":"-",
				(m_core->v__DOT__zippy__DOT__cpu_dbg_stall)?"Z":"-",
				(m_core->v__DOT__zippy__DOT__cmd_halt)?"H":"-",
				(m_core->v__DOT__zippy__DOT__thecpu__DOT__pf_cyc)?"P":"-",
				(m_core->v__DOT__zippy__DOT__thecpu__DOT__mem_cyc_gbl)?"G":"-",
				(m_core->v__DOT__zippy__DOT__thecpu__DOT__mem_cyc_lcl)?"L":"-",
				(m_core->v__DOT__zippy__DOT__thecpu__DOT__dcdvalid)?"D":"-",
				(m_core->v__DOT__zippy__DOT__thecpu__DOT__dcd_ce)?"k":"-",
				(m_core->v__DOT__zippy__DOT__thecpu__DOT__opvalid)?"O":"-",
				(m_core->v__DOT__zippy__DOT__thecpu__DOT__op_ce)?"k":"-",
				(m_core->v__DOT__zippy__DOT__thecpu__DOT__new_pc)?"N":"-",
				(m_core->v__DOT__zippy__DOT__thecpu__DOT__clear_pipeline)?"C":"-",
				(m_core->v__DOT__zippy__DOT__cmd_addr));
 
			printf("\n");
		}
 
	}
 
};
 
BUSMASTER_TB	*tb;
 
void	busmaster_kill(int v) {
	tb->kill();
	exit(0);
}
 
int	main(int argc, char **argv) {
	Verilated::commandArgs(argc, argv);
	tb = new BUSMASTER_TB;
 
	// signal(SIGINT,  busmaster_kill);
 
	tb->reset();
 
	while(1)
		tb->tick();
 
	exit(0);
}