URL
https://opencores.org/ocsvn/xulalx25soc/xulalx25soc/trunk
Subversion Repositories xulalx25soc
[/] [xulalx25soc/] [trunk/] [sw/] [sdcardscop.cpp] - Rev 113
Go to most recent revision | Compare with Previous | Blame | View Log
//////////////////////////////////////////////////////////////////////////////// // // Filename: sdcardscop.cpp // // Project: XuLA2 board // // Purpose: To read out, and decompose, the results of the wishbone scope // as applied to the SD-Card interaction over the SPI port. // // // Creator: Dan Gisselquist, Ph.D. // Gisselquist Technology, LLC // //////////////////////////////////////////////////////////////////////////////// // // Copyright (C) 2015, Gisselquist Technology, LLC // // This program is free software (firmware): you can redistribute it and/or // modify it under the terms of the GNU General Public License as published // by the Free Software Foundation, either version 3 of the License, or (at // your option) any later version. // // This program is distributed in the hope that it will be useful, but WITHOUT // ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or // FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License // for more details. // // License: GPL, v3, as defined and found on www.gnu.org, // http://www.gnu.org/licenses/gpl.html // // //////////////////////////////////////////////////////////////////////////////// // // // #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <strings.h> #include <ctype.h> #include <string.h> #include <signal.h> #include <assert.h> #include "llcomms.h" #include "usbi.h" #include "port.h" #include "regdefs.h" #define WBSCOPE R_CFGSCOPE #define WBSCOPEDATA R_CFGSCOPED FPGA *m_fpga; void closeup(int v) { m_fpga->kill(); exit(0); } void decode(DEVBUS::BUSW val) { int csn, sck, mosi, miso; int iwi, iws, ird, idat, odat; int grant; int cmd, rsp; csn = ((val>>24)>>3)&1; sck = ((val>>24)>>2)&1; mosi = ((val>>24)>>1)&1; miso = ((val>>24) )&1; iws = (val>>30)&1; iwi = (val>>29)&1; // ll_idle ird = (val>>28)&1; // ll_out_stb idat = (val>>8)&0x0ff; odat = (val&0x0ff); cmd = (val>>21)&0x07; rsp = (val>>17)&0x07; grant=(val>>20)&1; printf("%sSPI[%d,%d,%d,%d] (%d,%d) %02x %s%s [LL] %s %02x", (grant)?" ":"!G-", csn, sck, mosi, miso, cmd, rsp, idat, (iws)?"-":" ", (iwi)?">":" ", (ird)?"->":" ", odat); } int main(int argc, char **argv) { int skp=0, port = FPGAPORT; bool use_usb = true; skp=1; for(int argn=0; argn<argc-skp; argn++) { if (argv[argn+skp][0] == '-') { if (argv[argn+skp][1] == 'u') use_usb = true; else if (argv[argn+skp][1] == 'p') { use_usb = false; if (isdigit(argv[argn+skp][2])) port = atoi(&argv[argn+skp][2]); } skp++; argn--; } else argv[argn] = argv[argn+skp]; } argc -= skp; if (use_usb) m_fpga = new FPGA(new USBI()); else m_fpga = new FPGA(new NETCOMMS(FPGAHOST, port)); signal(SIGSTOP, closeup); signal(SIGHUP, closeup); unsigned v, lgln, scoplen; v = m_fpga->readio(WBSCOPE); if (0x60000000 != (v & 0x60000000)) { printf("Scope is not yet ready:\n"); printf("\tRESET:\t\t%s\n", (v&0x80000000)?"Ongoing":"Complete"); printf("\tSTOPPED:\t%s\n", (v&0x40000000)?"Yes":"No"); printf("\tTRIGGERED:\t%s\n", (v&0x20000000)?"Yes":"No"); printf("\tPRIMED:\t\t%s\n", (v&0x10000000)?"Yes":"No"); printf("\tMANUAL:\t\t%s\n", (v&0x08000000)?"Yes":"No"); printf("\tDISABLED:\t%s\n", (v&0x04000000)?"Yes":"No"); printf("\tZERO:\t\t%s\n", (v&0x02000000)?"Yes":"No"); exit(0); } else printf("SCOPD = %08x\n", v); lgln = (v>>20) & 0x1f; scoplen = (1<<lgln); DEVBUS::BUSW *buf; buf = new DEVBUS::BUSW[scoplen]; bool compressed = false, vector_read = true; DEVBUS::BUSW addrv = 0; if (vector_read) { m_fpga->readz(WBSCOPEDATA, scoplen, buf); } else { for(unsigned int i=0; i<scoplen; i++) buf[i] = m_fpga->readio(WBSCOPEDATA); } if(compressed) { for(int i=0; i<(int)scoplen; i++) { if ((buf[i]>>31)&1) { addrv += (buf[i]&0x7fffffff); printf(" ** \n"); continue; } printf("%10d %08x: ", addrv++, buf[i]); decode(buf[i]); printf("\n"); } } else { for(int i=0; i<(int)scoplen; i++) { if ((i>0)&&(buf[i] == buf[i-1])&&(i<(int)(scoplen-1))) { if ((i>2)&&(buf[i] != buf[i-2])) printf(" **** ****\n"); continue; } printf("%9d %08x: ", i, buf[i]); decode(buf[i]); printf("\n"); } } if (m_fpga->poll()) { printf("FPGA was interrupted\n"); m_fpga->clear(); } delete[] buf; delete m_fpga; }
Go to most recent revision | Compare with Previous | Blame | View Log