OpenCores
URL https://opencores.org/ocsvn/xulalx25soc/xulalx25soc/trunk

Subversion Repositories xulalx25soc

[/] [xulalx25soc/] [trunk/] [sw/] [wbregs.cpp] - Rev 6

Go to most recent revision | Compare with Previous | Blame | View Log

////////////////////////////////////////////////////////////////////////////////
//
// Filename:	wbregs.cpp
//
// Project:	XuLA2 board
//
// Purpose:	To give a user access, via a command line program, to read
//		and write wishbone registers one at a time.  Thus this program
//		implements readio() and writeio() but nothing more.
//
//
// Creator:	Dan Gisselquist, Ph.D.
//		Gisselquist Technology, LLC
//
////////////////////////////////////////////////////////////////////////////////
//
// Copyright (C) 2015, Gisselquist Technology, LLC
//
// This program is free software (firmware): you can redistribute it and/or
// modify it under the terms of  the GNU General Public License as published
// by the Free Software Foundation, either version 3 of the License, or (at
// your option) any later version.
//
// This program is distributed in the hope that it will be useful, but WITHOUT
// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
//
// License:	GPL, v3, as defined and found on www.gnu.org,
//		http://www.gnu.org/licenses/gpl.html
//
//
////////////////////////////////////////////////////////////////////////////////
//
//
//
//
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <strings.h>
#include <ctype.h>
#include <string.h>
#include <signal.h>
#include <assert.h>
 
#include "llcomms.h"
#include "usbi.h"
#include "port.h"
#include "regdefs.h"
 
FPGA	*m_fpga;
void	closeup(int v) {
	m_fpga->kill();
	exit(0);
}
 
int main(int argc, char **argv) {
	int	skp=0, port = FPGAPORT;
	bool	use_usb = true;
 
	skp=1;
	for(int argn=0; argn<argc-skp; argn++) {
		if (argv[argn+skp][0] == '-') {
			if (argv[argn+skp][1] == 'u')
				use_usb = true;
			else if (argv[argn+skp][1] == 'p') {
				use_usb = false;
				if (isdigit(argv[argn+skp][2]))
					port = atoi(&argv[argn+skp][2]);
			}
			skp++; argn--;
		} else
			argv[argn] = argv[argn+skp];
	} argc -= skp;
 
	if (use_usb)
		m_fpga = new FPGA(new USBI());
	else
		m_fpga = new FPGA(new NETCOMMS(FPGAHOST, port));
 
	signal(SIGSTOP, closeup);
	signal(SIGHUP, closeup);
 
	if ((argc < 1)||(argc > 2)) {
		// usage();
		printf("USAGE: wbregs address [value]\n");
		exit(-1);
	}
 
	const char *nm;
	unsigned address = addrdecode(argv[0]), value;
	nm = addrname(address);
	if (nm == NULL)
		nm = "no name";
 
	if (argc < 2) {
		FPGA::BUSW	v;
		try {
			unsigned char a, b, c, d;
			v = m_fpga->readio(address);
			a = (v>>24)&0x0ff;
			b = (v>>16)&0x0ff;
			c = (v>> 8)&0x0ff;
			d = (v    )&0x0ff;
			printf("%08x (%8s) : [%c%c%c%c] %08x\n", address, nm, 
				isgraph(a)?a:'.', isgraph(b)?b:'.',
				isgraph(c)?c:'.', isgraph(d)?d:'.', v);
		} catch(BUSERR b) {
			printf("%08x (%8s) : BUS-ERROR\n", address, nm);
		}
	} else {
		value = strtoul(argv[1], NULL, 0);
		m_fpga->writeio(address, value);
		printf("%08x (%8s)-> %08x\n", address, nm, value);
	}
 
	if (m_fpga->poll())
		printf("FPGA was interrupted\n");
	delete	m_fpga;
}
 
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.