OpenCores
URL https://opencores.org/ocsvn/xulalx25soc/xulalx25soc/trunk

Subversion Repositories xulalx25soc

[/] [xulalx25soc/] [trunk/] [sw/] [wbsettime.cpp] - Rev 31

Go to most recent revision | Compare with Previous | Blame | View Log

////////////////////////////////////////////////////////////////////////////////
//
// Filename:	wbsettime.cpp
//
// Project:	XuLA2 board
//
// Purpose:	To give a user access, via a command line program, to set the
//		real time clock within the FPGA.  Note, however, that the RTC
//	clock device only sets the subseconds field when you program it at the
//	top of a minute.  This program, therefore, will wait 'til the top of a 
//	minute to set the clock.  It can be annoying, but ... it works.
//
//
// Creator:	Dan Gisselquist, Ph.D.
//		Gisselquist Technology, LLC
//
////////////////////////////////////////////////////////////////////////////////
//
// Copyright (C) 2015, Gisselquist Technology, LLC
//
// This program is free software (firmware): you can redistribute it and/or
// modify it under the terms of  the GNU General Public License as published
// by the Free Software Foundation, either version 3 of the License, or (at
// your option) any later version.
//
// This program is distributed in the hope that it will be useful, but WITHOUT
// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
//
// License:	GPL, v3, as defined and found on www.gnu.org,
//		http://www.gnu.org/licenses/gpl.html
//
//
////////////////////////////////////////////////////////////////////////////////
//
//
//
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <strings.h>
#include <ctype.h>
#include <string.h>
#include <signal.h>
#include <assert.h>
#include <time.h>
 
#include "llcomms.h"
#include "usbi.h"
#include "port.h"
#include "regdefs.h"
 
FPGA	*m_fpga;
void	closeup(int v) {
	m_fpga->kill();
	exit(0);
}
 
int main(int argc, char **argv) {
	bool	set_time = true;
	int	skp=0, port = FPGAPORT;
	bool	use_usb = true;
 
	skp=1;
	for(int argn=0; argn<argc-skp; argn++) {
		if (argv[argn+skp][0] == '-') {
			if (argv[argn+skp][1] == 'u')
				use_usb = true;
			else if (argv[argn+skp][1] == 'p') {
				use_usb = false;
				if (isdigit(argv[argn+skp][2]))
					port = atoi(&argv[argn+skp][2]);
			}
			skp++; argn--;
		} else
			argv[argn] = argv[argn+skp];
	} argc -= skp;
 
	if (use_usb)
		m_fpga = new FPGA(new USBI());
	else
		m_fpga = new FPGA(new NETCOMMS(FPGAHOST, port));
 
	signal(SIGSTOP, closeup);
	signal(SIGHUP, closeup);
 
 
	time_t	now, then;
 
	// We first wait for a second change, because we don't know how
	// much time this will take.
	DEVBUS::BUSW	clockword = 0l, dateword = 0l;
	clockword = m_fpga->readio(R_CLOCK);
 
	now = time(NULL);
	while(time(NULL) == now)
		;
 
	if (set_time) {
		// Now, we have one second to set the time
		struct	tm	*tmp;
		int		sleepv = 0;
 
		then = now+1;
		tmp = localtime(&then);
		clockword &= ~0x03fffff;
 
		if (tmp->tm_sec != 0) {
			// printf("THEN SECONDS = %d, ADDING %d\n",
				// tmp->tm_sec, 60-tmp->tm_sec);
			if (tmp->tm_sec < 58)
				sleepv = 59 - tmp->tm_sec;
			then += 60 - tmp->tm_sec;
			tmp = localtime(&then);
			printf("Sleeping for %d seconds, so as to set time at the top of the minute\n", sleepv);
		}
 
		// printf("ORIGINAL : %02d:%02d:%02d\n", tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
		// Seconds
		clockword |= (((tmp->tm_sec)%10)&0x0f);
		clockword |= (((tmp->tm_sec)/10)&0x0f)<< 4;
		// Minutes
		clockword |= (((tmp->tm_min)%10)&0x0f)<< 8;
		clockword |= (((tmp->tm_min)/10)&0x0f)<<12;
		// Hours
		clockword |= (((tmp->tm_hour)%10)&0x0f)<<16;
		clockword |= (((tmp->tm_hour)/10)&0x0f)<<20;
 
		// Years
		dateword   = 0x00000000;
		dateword  |= (((tmp->tm_year+1900)/1000)&0x0f)<<28;
		dateword  |=((((tmp->tm_year+1900)/100 )%10)&0x0f)<<24;
		dateword  |=((((tmp->tm_year+1900)/10  )%10)&0x0f)<<20;
		dateword  |=((((tmp->tm_year+1900)     )%10)&0x0f)<<16;
		dateword  |= (((tmp->tm_mon +1)/10)&0x0f)<<12;
		dateword  |= (((tmp->tm_mon +1)%10)&0x0f)<< 8;
		dateword  |= (((tmp->tm_mday  )/10)&0x0f)<< 4;
		dateword  |= (((tmp->tm_mday  )%10)&0x0f);
		if (sleepv > 0)
			sleep(sleepv);
 
		while(time(NULL) < then)
			;
		m_fpga->writeio(R_CLOCK, clockword);
 
		printf("Time set to   %06x\n", clockword & 0x03fffff);
#ifdef R_DATE	// If we have the date capability
		m_fpga->writeio(R_DATE, dateword);
		printf("Date set to %08x\n", dateword);
		printf("(Now reads %08x)\n", m_fpga->readio(R_DATE));
#endif // R_DATE
 
		now = then;
	}
 
	delete	m_fpga;
}
 
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.