URL
https://opencores.org/ocsvn/y80e/y80e/trunk
Subversion Repositories y80e
[/] [y80e/] [trunk/] [rtl/] [defines.v] - Rev 12
Compare with Previous | Blame | View Log
/*******************************************************************************************/ /** **/ /** ORIGINAL COPYRIGHT (C) 2011, SYSTEMYDE INTERNATIONAL CORPORATION, ALL RIGHTS RESERVED **/ /** COPYRIGHT (C) 2012, SERGEY BELYASHOV **/ /** **/ /** define file to make the code more readable Rev 0.0 06/18/2012 **/ /** **/ /*******************************************************************************************/ /*****************************************************************************************/ /* */ /* page register control - DO NOT MODIFY */ /* */ /*****************************************************************************************/ `define MAIN_PG 4'b0000 //no instruction prefix byte(s) `define INTR_PG 4'b0001 //interrupt acknowledge `define CB_PAGE 4'b0010 //CB instruction prefix `define DMA_PG 4'b0011 //dma acknowledge `define DD_PAGE 4'b0100 //DD instruction prefix `define FD_PAGE 4'b0101 //FD instruction prefix `define DDCB_PG 4'b0110 //DD-CB instruction prefix `define FDCB_PG 4'b0111 //FD-CB instruction prefix `define ED_PAGE 4'b1000 //ED instruction prefix `define DEC_MAIN 4'b0x0x //main page or DD page or FD page `define DEC_ED 4'b1xxx //ED page /*****************************************************************************************/ /* */ /* program counter register control: pc_sel */ /* */ /*****************************************************************************************/ `define PCCTL_IDX 2 `define PC_NUL 3'b000 //No operation on PC `define PC_LD 3'b001 //PC loaded unconditionally `define PC_NILD 3'b011 //PC loaded if no interrupt, sample interrupt `define PC_INT 3'b100 //Sample interrupt/dma only `define PC_DMA 3'b110 //Sample dma only `define PC_NILD2 3'b111 //PC loaded if no latched interrupt /*****************************************************************************************/ /* */ /* address bus select: add_sel */ /* */ /*****************************************************************************************/ `define ADCTL_IDX 4 `define ADD_RSTVAL 5'b00000 //Pipeline register reset value `define ADD_PC 5'b00001 //Select address register from PC `define ADD_HL 5'b00010 //Select address register from HL `define ADD_SP 5'b00100 //Select address register from SP `define ADD_ALU 5'b01000 //Select address register from ALU `define ADD_ALU8 5'b10000 //Select address register from {8'h0, ALU[7:0]} `define AD_PC 0 //Address from PC `define AD_HL 1 //Address from HL `define AD_SP 2 //Address from SP `define AD_ALU 3 //Address from ALU `define AD_ALU8 4 //Address from {8'h0, ALU[7:0]} /*****************************************************************************************/ /* */ /* transaction type select: tran_sel */ /* */ /*****************************************************************************************/ `define TTYPE_IDX 5 `define TRAN_RSTVAL 6'b000000 //Transaction type reset value `define TRAN_IAK 6'b000001 //Intack transaction `define TRAN_IDL 6'b000010 //Idle transaction `define TRAN_IF 6'b000100 //Instruction fetch transaction `define TRAN_IO 6'b001000 //I/O transaction `define TRAN_MEM 6'b010000 //Memory (data) transaction `define TRAN_STK 6'b100000 //Memory (stack) transaction `define TT_IAK 0 //Interrupt acknowledge transaction `define TT_IDL 1 //Idle transaction `define TT_IF 2 //Instruction fetch transaction `define TT_IO 3 //I/O transaction `define TT_MEM 4 //Memory (data) transaction `define TT_STK 5 //Memory (stack) transaction /*****************************************************************************************/ /* */ /* data output control: do_ctl - DO NOT MODIFY */ /* */ /*****************************************************************************************/ `define DO_IDX 2 `define DO_NUL 3'b000 //No load `define DO_IO 3'b010 //Load i/o data from lsb `define DO_LSB 3'b100 //Load mem data from lsb `define DO_MSB 3'b101 //Load mem data from msb /*****************************************************************************************/ /* */ /* data input control: di_ctl - DO NOT MODIFY */ /* */ /*****************************************************************************************/ `define DI_IDX 1 `define DI_NUL 2'b00 //No load `define DI_DI0 2'b01 //Load din0 `define DI_DI1 2'b10 //Load din1 `define DI_DI10 2'b11 //Load both din0 and din1 /*****************************************************************************************/ /* */ /* interrupt enable control: ief_ctl - DO NOT MODIFY */ /* */ /*****************************************************************************************/ `define IEF_IDX 2 `define IEF_NUL 3'b000 //No load `define IEF_0 3'b010 //Load zero `define IEF_1 3'b011 //Load one `define IEF_NMI 3'b100 //ief2 <= ief1, ief1 <= 0 `define IEF_RTN 3'b101 //ief1 <= ief2 /*****************************************************************************************/ /* */ /* int mode control: imd_ctl - DO NOT MODIFY */ /* */ /*****************************************************************************************/ `define IMD_IDX 1 `define IMD_NUL 2'b00 //No load `define IMD_0 2'b01 //Set interrupt mode 0 `define IMD_1 2'b10 //Set interrupt mode 1 `define IMD_2 2'b11 //Set interrupt mode 2 /*****************************************************************************************/ /* */ /* half-carry flag control: hflg_ctl - DO NOT MODIFY */ /* */ /*****************************************************************************************/ `define HFLG_IDX 1 `define HFLG_NUL 2'b00 //No load `define HFLG_H 2'b01 //Load half-carry result `define HFLG_0 2'b10 //Load zero `define HFLG_1 2'b11 //Load one /*****************************************************************************************/ /* */ /* parity/overflow flag control: pflg_ctl */ /* */ /*****************************************************************************************/ `define PFLG_IDX 2 `define PFLG_NUL 3'b000 //No load `define PFLG_V 3'b001 //Load overflow result `define PFLG_0 3'b010 //Load zero `define PFLG_1 3'b011 //Load one `define PFLG_P 3'b100 //Load parity result `define PFLG_B 3'b101 //Load block count zero result `define PFLG_F 3'b111 //Load ief /*****************************************************************************************/ /* */ /* negate flag control: nflg_ctl - DO NOT MODIFY */ /* */ /*****************************************************************************************/ `define NFLG_IDX 1 `define NFLG_NUL 2'b00 //No load `define NFLG_S 2'b01 //Load sign result `define NFLG_0 2'b10 //Load zero `define NFLG_1 2'b11 //Load one /*****************************************************************************************/ /* */ /* temporary flag control: tflg_ctl */ /* */ /*****************************************************************************************/ `define TFLG_IDX 1 `define TFLG_NUL 2'b00 //No load `define TFLG_Z 2'b01 //Load zero result `define TFLG_1 2'b10 //Load one result (blk out) `define TFLG_B 2'b11 //Load blk cp result /*****************************************************************************************/ /* */ /* write register control: wr_sel - unencoded */ /* */ /*****************************************************************************************/ `define WREG_IDX 16 `define WREG_BB 17'b11000000000000000 //Select B to write `define WREG_BC 17'b11100000000000000 //Select BC to write `define WREG_CC 17'b10100000000000000 //Select C to write `define WREG_DD 17'b10010000000000000 //Select D to write `define WREG_DE 17'b10011000000000000 //Select DE to write `define WREG_EE 17'b10001000000000000 //Select E to write `define WREG_HH 17'b10000100000000000 //Select H to write `define WREG_HL 17'b10000110000000000 //Select HL to write `define WREG_LL 17'b10000010000000000 //Select L to write `define WREG_DEHL 17'b10011110000000000 //Select DEHL to write (ex case) `define WREG_AA 17'b10000001000000000 //Select A to write `define WREG_AF 17'b10000001100000000 //Select A and F to write `define WREG_FF 17'b10000000100000000 //Select F to write `define WREG_SP 17'b10000000010000000 //Select SP to write `define WREG_TMP 17'b10000000001000000 //Select TMP register to write `define WREG_IXH 17'b10000000000100000 //Select IXH to write `define WREG_IX 17'b10000000000110000 //Select IX to write `define WREG_IXL 17'b10000000000010000 //Select IXL to write `define WREG_IYH 17'b10000000000001000 //Select IYH to write `define WREG_IY 17'b10000000000001100 //Select IY to write `define WREG_IYL 17'b10000000000000100 //Select IYL to write `define WREG_II 17'b10000000000000010 //Select I register to write `define WREG_RR 17'b10000000000000001 //Select R register to write `define WREG_NUL 17'b00000000000000000 //No register write `define WR_REG 16 //register write `define WR_BB 15 //BB register index `define WR_CC 14 //CC register index `define WR_DD 13 //DD register index `define WR_EE 12 //EE register index `define WR_HH 11 //HH register index `define WR_LL 10 //LL register index `define WR_AA 9 //AA register index `define WR_FF 8 //FF register index `define WR_SP 7 //SP register index `define WR_TMP 6 //TMP register index `define WR_IXH 5 //IXH register index `define WR_IXL 4 //IXL register index `define WR_IYH 3 //IYH register index `define WR_IYL 2 //IYL register index `define WR_II 1 //II register index `define WR_RR 0 //RR register index /*****************************************************************************************/ /* */ /* ALU input A control: alua_sel */ /* */ /*****************************************************************************************/ `define ALUA_IDX 14 `define ALUA_RSTVAL 15'h0000 //Reset value for pipeline controls `define ALUA_ZER 15'h0000 //Select 16'h0000 (default) `define ALUA_ONE 15'h0001 //Select 16'h0001 `define ALUA_M1 15'h0002 //Select 16'hFFFF `define ALUA_M2 15'h0004 //Select 16'hFFFE `define ALUA_HL 15'h0008 //Select HL register `define ALUA_IX 15'h0010 //Select IX register `define ALUA_IY 15'h0020 //Select IY register `define ALUA_PC 15'h0040 //Select PC register `define ALUA_AA 15'h0080 //Select A register `define ALUA_BIT 15'h0100 //Select bit select constant `define ALUA_DAA 15'h0200 //Select decimal adjust constant `define ALUA_II 15'h0400 //Select I register `define ALUA_RR 15'h0800 //Select R register `define ALUA_INT 15'h1000 //Select interrupt address `define ALUA_TMP 15'h2000 //Select TMP register `define ALUA_RST 15'h4000 //Select restart address `define AA_ONE 0 //alua one `define AA_M1 1 //alua -1 `define AA_M2 2 //alua -2 `define AA_HL 3 //alua hl `define AA_IX 4 //alua ix `define AA_IY 5 //alua iy `define AA_PC 6 //alua pc `define AA_AA 7 //alua aa `define AA_BIT 8 //alua bit `define AA_DAA 9 //alua daa `define AA_II 10 //alua ii `define AA_RR 11 //alua rr `define AA_INT 12 //alua interrupt `define AA_TMP 13 //alua tmp `define AA_RST 14 //alua restart /*****************************************************************************************/ /* */ /* ALU input B control: alub_sel */ /* */ /*****************************************************************************************/ `define ALUB_IDX 12 `define ALUB_RSTVAL 13'h1000 //Reset value for pipeline controls `define ALUB_AF 13'h1002 //Select A and F registers `define ALUB_AA 13'h1003 //Select A register `define ALUB_BC 13'h0004 //Select BC register `define ALUB_BB 13'h0005 //Select B register `define ALUB_CC 13'h0004 //Select C register `define ALUB_DE 13'h0008 //Select DE register `define ALUB_DD 13'h0009 //Select D register `define ALUB_EE 13'h0008 //Select E register `define ALUB_HL 13'h0010 //Select HL register `define ALUB_HH 13'h0011 //Select H register `define ALUB_LL 13'h0010 //Select L register `define ALUB_IX 13'h0020 //Select IX register `define ALUB_IXH 13'h0021 //Select IX register high byte `define ALUB_IXL 13'h0020 //Select IX register low byte `define ALUB_IY 13'h0040 //Select IY register `define ALUB_IYH 13'h0041 //Select IY register high byte `define ALUB_IYL 13'h0040 //Select IY register low byte `define ALUB_SP 13'h0080 //Select SP register `define ALUB_SPH 13'h0081 //Select SP register high byte `define ALUB_DIN 13'h0100 //Select data input register `define ALUB_DINH 13'h0101 //Select data input register high byte `define ALUB_IO 13'h0200 //Select i/o address `define ALUB_TMP 13'h0400 //Select TMP register `define ALUB_TMPH 13'h0401 //Select TMP register high byte `define ALUB_PC 13'h1800 //Select PC register `define ALUB_PCH 13'h1801 //Select PC register high byte `define AB_SHR 0 //alub shift right `define AB_AF 1 //alub af `define AB_BC 2 //alub bc `define AB_DE 3 //alub de `define AB_HL 4 //alub hl `define AB_IX 5 //alub ix `define AB_IY 6 //alub iy `define AB_SP 7 //alub sp `define AB_DIN 8 //alub din `define AB_IO 9 //alub io `define AB_TMP 10 //alub tmp `define AB_PC 11 //alub pc `define AB_ADR 12 //alub address pc /*****************************************************************************************/ /* */ /* ALU operation control: aluop_sel - 2 MSBs fixed for unit sel */ /* */ /*****************************************************************************************/ `define ALUOP_IDX 7 `define ALUOP_RSTVAL 8'b00000000 //Reset Value for pipeline controls `define ALUOP_ADD 8'b01000000 //ALU math: add `define ALUOP_BADD 8'b01000001 //ALU math: byte add `define ALUOP_BDEC 8'b01000011 //ALU math: byte add (decrement) `define ALUOP_ADS 8'b01000100 //ALU math: add signed byte `define ALUOP_DAA 8'b01000101 //ALU math: byte add (daa) `define ALUOP_ADC 8'b01001000 //ALU math: add with carry `define ALUOP_BADC 8'b01001001 //ALU math: byte add with carry `define ALUOP_SUB 8'b01010000 //ALU math: subtract `define ALUOP_BSUB 8'b01010001 //ALU math: subtract `define ALUOP_SBC 8'b01100000 //ALU math: subtract with carry `define ALUOP_BSBC 8'b01100001 //ALU math: byte subtract with carry `define ALUOP_PASS 8'b00000000 //ALU logic: pass b bus `define ALUOP_BAND 8'b00000011 //ALU logic: byte and `define ALUOP_BOR 8'b00000101 //ALU logic: byte or `define ALUOP_BXOR 8'b00001001 //ALU logic: byte or `define ALUOP_CCF 8'b00010000 //ALU logic: complement carry `define ALUOP_SCF 8'b00010010 //ALU logic: set carry `define ALUOP_RLD1 8'b00011000 //ALU logic: rld first step `define ALUOP_RLD2 8'b00011010 //ALU logic: rld second step `define ALUOP_RRD1 8'b00011100 //ALU logic: rrd first step `define ALUOP_RRD2 8'b00011110 //ALU logic: rrd second step `define ALUOP_APAS 8'b00100000 //ALU logic: pass a bus `define ALUOP_RL 8'b10000000 //ALU shft: rotate left `define ALUOP_RLA 8'b10000001 //ALU shft: rotate left acc `define ALUOP_RLC 8'b10000010 //ALU shft: rotate left circular `define ALUOP_RLCA 8'b10000011 //ALU shft: rotate left circular acc `define ALUOP_RR 8'b10000100 //ALU shft: rotate right `define ALUOP_RRA 8'b10000101 //ALU shft: rotate right acc `define ALUOP_RRC 8'b10001000 //ALU shft: rotate right circular `define ALUOP_RRCA 8'b10001001 //ALU shft: rotate right circular acc `define ALUOP_SLA 8'b10010000 //ALU shft: shift left arithmetic `define ALUOP_SLL 8'b10011000 //ALU shft: shift left logical (x = (x << 1) | 1) `define ALUOP_SRL 8'b10100000 //ALU shft: shift right logical `define ALUOP_SRA 8'b10101000 //ALU shft: shift right arithmetic `define ALUOP_MLT 8'b11000000 //ALU mult: 8 bit multiplication /*****************************************************************************************/ /* */ /* ALU operation control: 6 encoded */ /* */ /*****************************************************************************************/ `define AOP_IDX 5 `define AOP_ADD 6'b000000 //ALU math: add `define AOP_BADD 6'b000001 //ALU math: byte add `define AOP_BDEC 6'b000011 //ALU math: byte add (decrement) `define AOP_ADS 6'b000100 //ALU math: add signed byte `define AOP_DAA 6'b000101 //ALU math: byte add (daa) `define AOP_ADC 6'b001000 //ALU math: add with carry `define AOP_BADC 6'b001001 //ALU math: byte add with carry `define AOP_SUB 6'b010000 //ALU math: subtract `define AOP_BSUB 6'b010001 //ALU math: subtract `define AOP_SBC 6'b100000 //ALU math: subtract with carry `define AOP_BSBC 6'b100001 //ALU math: byte subtract with carry `define AOP_PASS 6'b000000 //ALU logic: pass b bus `define AOP_BAND 6'b000011 //ALU logic: byte and `define AOP_BOR 6'b000101 //ALU logic: byte or `define AOP_BXOR 6'b001001 //ALU logic: byte or `define AOP_CCF 6'b010000 //ALU logic: complement carry `define AOP_SCF 6'b010010 //ALU logic: set carry `define AOP_RLD1 6'b011000 //ALU logic: rld first step `define AOP_RLD2 6'b011010 //ALU logic: rld second step `define AOP_RRD1 6'b011100 //ALU logic: rrd first step `define AOP_RRD2 6'b011110 //ALU logic: rrd second step `define AOP_APAS 6'b100000 //ALU logic: pass a bus `define AOP_RL 6'b000000 //ALU shft: rotate left `define AOP_RLA 6'b000001 //ALU shft: rotate left acc `define AOP_RLC 6'b000010 //ALU shft: rotate left circular `define AOP_RLCA 6'b000011 //ALU shft: rotate left circular acc `define AOP_RR 6'b000100 //ALU shft: rotate right `define AOP_RRA 6'b000101 //ALU shft: rotate right acc `define AOP_RRC 6'b001000 //ALU shft: rotate right circular `define AOP_RRCA 6'b001001 //ALU shft: rotate right circular acc `define AOP_SLA 6'b010000 //ALU shft: shift left arithmetic `define AOP_SLL 6'b011000 //ALU shft: shift left logical `define AOP_SRL 6'b100000 //ALU shft: shift right logical `define AOP_SRA 6'b101000 //ALU shft: shift right arithmetic `define AOP_MLT 6'b000000 //ALU mult: 8 bit multiplication /*****************************************************************************************/ /* */ /* machine state - pseudo-one-hot */ /* */ /*****************************************************************************************/ `define STATE_IDX 31 `define sRST 32'b00000000000000000000000000000000 //reset `define sDEC1 32'b00000000000000000000000000000011 //decode 1st opcode `define sIF2B 32'b00000000000000000000000000000101 //fetch 2nd opcode (2) `define sDEC2 32'b00000000000000000000000000001001 //decode 2nd opcode `define sOF1B 32'b00000000000000000000000000010001 //fetch 1st operand (2) `define sOF2A 32'b00000000000000000000000000100001 //fetch 2nd operand (1) `define sOF2B 32'b00000000000000000000000001000001 //fetch 2nd operand (2) `define sIF3A 32'b00000000000000000000000010000001 //fetch 3rd opcode (1) `define sIF3B 32'b00000000000000000000000100000001 //fetch 3rd opcode (2) `define sADR1 32'b00000000000000000000001000000001 //address calculate (1) `define sADR2 32'b00000000000000000000010000000001 //address calculate (2) `define sRD1A 32'b00000000000000000000100000000001 //read 1st operand (1) `define sRD1B 32'b00000000000000000001000000000001 //read 1st operand (2) `define sRD2A 32'b00000000000000000010000000000001 //read 2nd operand (1) `define sRD2B 32'b00000000000000000100000000000001 //read 2nd operand (2) `define sWR1A 32'b00000000000000001000000000000001 //write 1st operand (1) `define sWR1B 32'b00000000000000010000000000000001 //write 1st operand (2) `define sWR2A 32'b00000000000000100000000000000001 //write 2nd operand (1) `define sWR2B 32'b00000000000001000000000000000001 //write 2nd operand (2) `define sBLK1 32'b00000000000010000000000000000001 //block instruction (1) `define sBLK2 32'b00000000000100000000000000000001 //block instruction (2) `define sPCA 32'b00000000001000000000000000000001 //PC adjust `define sPCO 32'b00000000010000000000000000000001 //PC output `define sIF1A 32'b00000000100000000000000000000001 //fetch 1st opcode (1) `define sIF1B 32'b00000001000000000000000000000001 //fetch 1st opcode (2) `define sINTA 32'b00000010000000000000000000000001 //interrupt acknowledge (1) `define sINTB 32'b00000100000000000000000000000001 //interrupt acknowledge (2) `define sHLTA 32'b00001000000000000000000000000001 //halt & sleep (1) `define sHLTB 32'b00010000000000000000000000000001 //halt & sleep (2) `define sDMA1 32'b00100000000000000000000000000001 //dma transfer (1) `define sDMA2 32'b01000000000000000000000000000001 //dma transfer (2) `define sRSTE 32'b10000000000000000000000000000001 //reset exit `define RST 32'bxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx0 //reset `define DEC1 32'bxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx11 //decode 1st opcode `define IF2B 32'bxxxxxxxxxxxxxxxxxxxxxxxxxxxxx1x1 //fetch 2nd opcode (2) `define DEC2 32'bxxxxxxxxxxxxxxxxxxxxxxxxxxxx1xx1 //decode 2nd opcode `define OF1B 32'bxxxxxxxxxxxxxxxxxxxxxxxxxxx1xxx1 //fetch 1st operand (2) `define OF2A 32'bxxxxxxxxxxxxxxxxxxxxxxxxxx1xxxx1 //fetch 2nd operand (1) `define OF2B 32'bxxxxxxxxxxxxxxxxxxxxxxxxx1xxxxx1 //fetch 2nd operand (2) `define IF3A 32'bxxxxxxxxxxxxxxxxxxxxxxxx1xxxxxx1 //fetch 3rd opcode (1) `define IF3B 32'bxxxxxxxxxxxxxxxxxxxxxxx1xxxxxxx1 //fetch 3rd opcode (2) `define ADR1 32'bxxxxxxxxxxxxxxxxxxxxxx1xxxxxxxx1 //address calculate (1) `define ADR2 32'bxxxxxxxxxxxxxxxxxxxxx1xxxxxxxxx1 //address calculate (2) `define RD1A 32'bxxxxxxxxxxxxxxxxxxxx1xxxxxxxxxx1 //read 1st operand (1) `define RD1B 32'bxxxxxxxxxxxxxxxxxxx1xxxxxxxxxxx1 //read 1st operand (2) `define RD2A 32'bxxxxxxxxxxxxxxxxxx1xxxxxxxxxxxx1 //read 2nd operand (1) `define RD2B 32'bxxxxxxxxxxxxxxxxx1xxxxxxxxxxxxx1 //read 2nd operand (2) `define WR1A 32'bxxxxxxxxxxxxxxxx1xxxxxxxxxxxxxx1 //write 1st operand (1) `define WR1B 32'bxxxxxxxxxxxxxxx1xxxxxxxxxxxxxxx1 //write 1st operand (2) `define WR2A 32'bxxxxxxxxxxxxxx1xxxxxxxxxxxxxxxx1 //write 2nd operand (1) `define WR2B 32'bxxxxxxxxxxxxx1xxxxxxxxxxxxxxxxx1 //write 2nd operand (2) `define BLK1 32'bxxxxxxxxxxxx1xxxxxxxxxxxxxxxxxx1 //block instruction (1) `define BLK2 32'bxxxxxxxxxxx1xxxxxxxxxxxxxxxxxxx1 //block instruction (2) `define PCA 32'bxxxxxxxxxx1xxxxxxxxxxxxxxxxxxxx1 //PC adjust `define PCO 32'bxxxxxxxxx1xxxxxxxxxxxxxxxxxxxxx1 //PC output `define IF1A 32'bxxxxxxxx1xxxxxxxxxxxxxxxxxxxxxx1 //fetch 1st opcode (1) `define IF1B 32'bxxxxxxx1xxxxxxxxxxxxxxxxxxxxxxx1 //fetch 1st opcode (2) `define INTA 32'bxxxxxx1xxxxxxxxxxxxxxxxxxxxxxxx1 //interrupt acknowledge (1) `define INTB 32'bxxxxx1xxxxxxxxxxxxxxxxxxxxxxxxx1 //interrupt acknowledge (2) `define HLTA 32'bxxxx1xxxxxxxxxxxxxxxxxxxxxxxxxx1 //halt & sleep (1) `define HLTB 32'bxxx1xxxxxxxxxxxxxxxxxxxxxxxxxxx1 //halt & sleep (2) `define DMA1 32'bxx1xxxxxxxxxxxxxxxxxxxxxxxxxxxx1 //dma transfer (1) `define DMA2 32'bx1xxxxxxxxxxxxxxxxxxxxxxxxxxxxx1 //dma transfer (2) `define RSTE 32'b1xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx1 //reset exit