Subversion Repositories yifive

//////////////////////////////////////////////////////////////////////
////                                                              ////
////  SPI RX  Module                                              ////
////                                                              ////
////  This file is part of the YIFive cores project               ////
////  http://www.opencores.org/cores/yifive/                      ////
////                                                              ////
////  Description                                                 ////
////     SPI RX module                                            ////
////                                                              ////
////  To Do:                                                      ////
////    nothing                                                   ////
////                                                              ////
////  Author(s):                                                  ////
////      - Dinesh Annayya, dinesha@opencores.org                 ////
////                                                              ////
////  Revision :                                                  ////
////     V.0  -  June 8, 2021                                     //// 
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////


module spim_rx #(
                parameter ENDIEAN = 0  // 0 - Little, 1 - Big endian, since RISV is Little indian default set 0
        )       
(
    input  logic        clk,
    input  logic        rstn,
    input  logic        en,
    input  logic        rx_edge,
    output logic        rx_done,
    input  logic        sdi0,
    input  logic        sdi1,
    input  logic        sdi2,
    input  logic        sdi3,
    input  logic        en_quad_in,
    input  logic [15:0] counter_in,
    input  logic        counter_in_upd,
    output logic [31:0] data,
    input  logic        data_ready,
    output logic        data_valid,
    output logic        clk_en_o
);

  logic [31:0] data_int;
  logic [31:0] data_int_next;
  logic [15:0] counter;
  logic [15:0] counter_trgt;
  logic [15:0] counter_next;
  logic        reg_done;
  enum logic [1:0] { IDLE, RECEIVE, WAIT_FIFO, WAIT_FIFO_DONE } rx_CS, rx_NS;


  assign reg_done  = (!en_quad_in && (counter[4:0] == 5'b11111)) || (en_quad_in && (counter[2:0] == 3'b111));

  // RISV is little endian, so data is converted to little endian format
  assign data = (ENDIEAN) ? data_int_next : {data_int_next[7:0],data_int_next[15:8],data_int_next[23:16],data_int_next[31:24]};


  always_comb
  begin
    rx_NS         = rx_CS;
    data_int_next = data_int;
    data_valid    = 1'b0;
    counter_next  = counter;

    case (rx_CS)
      IDLE: begin

        // check first if there is available space instead of later
        if (en) begin
          rx_NS = RECEIVE;
        end
      end

      RECEIVE: begin

        if (rx_edge) begin
          counter_next = counter + 1;
          if (en_quad_in)
             data_int_next = {data_int[27:0],sdi3,sdi2,sdi1,sdi0};
          else
             data_int_next = {data_int[30:0],sdi1};

          if (rx_done) begin
            counter_next = 0;
            data_valid   = 1'b1;

            if (data_ready)
              rx_NS = IDLE;
            else
              rx_NS = WAIT_FIFO_DONE;
          end else if (reg_done) begin
            data_valid = 1'b1;

            if (~data_ready) begin
              // no space in the FIFO, wait for free space
              rx_NS    = WAIT_FIFO;
            end
          end
        end
      end

      WAIT_FIFO_DONE: begin
        data_valid = 1'b1;
        if (data_ready)
          rx_NS = IDLE;
      end

      WAIT_FIFO: begin
        data_valid = 1'b1;
        if (data_ready)
          rx_NS = RECEIVE;
      end
    endcase
  end


  always_ff @(posedge clk, negedge rstn)
  begin
    if (rstn == 0)
    begin
      counter      <= 0;
      counter_trgt <= 'h8;
      data_int     <= '0;
      rx_done      <= '0;
      clk_en_o     <= '0;
      rx_CS        <= IDLE;
    end
    else
    begin
      if (rx_edge) begin
         counter      <= counter_next;
         data_int     <= data_int_next;
         rx_CS        <= rx_NS;
         rx_done      <= (counter_next == (counter_trgt-1)) && (rx_NS == RECEIVE);
         clk_en_o     <= (rx_NS == RECEIVE);
      end
       if (en && counter_in_upd) begin
          counter_trgt <= (en_quad_in) ? {2'b00,counter_in[15:2]} : counter_in;
        end
    end
  end

endmodule