URL
https://opencores.org/ocsvn/z80soc/z80soc/trunk
Subversion Repositories z80soc
[/] [z80soc/] [tags/] [z80soc05c/] [DE1/] [rtl/] [VHDL/] [t80/] [T80a.vhd] - Rev 31
Compare with Previous | Blame | View Log
-- -- Z80 compatible microprocessor core, asynchronous top level -- -- Version : 0247 -- -- Copyright (c) 2001-2002 Daniel Wallner (jesus@opencores.org) -- -- All rights reserved -- -- Redistribution and use in source and synthezised forms, with or without -- modification, are permitted provided that the following conditions are met: -- -- Redistributions of source code must retain the above copyright notice, -- this list of conditions and the following disclaimer. -- -- Redistributions in synthesized form must reproduce the above copyright -- notice, this list of conditions and the following disclaimer in the -- documentation and/or other materials provided with the distribution. -- -- Neither the name of the author nor the names of other contributors may -- be used to endorse or promote products derived from this software without -- specific prior written permission. -- -- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, -- THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -- PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE -- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN -- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -- POSSIBILITY OF SUCH DAMAGE. -- -- Please report bugs to the author, but before you do so, please -- make sure that this is not a derivative work and that -- you have the latest version of this file. -- -- The latest version of this file can be found at: -- http://www.opencores.org/cvsweb.shtml/t80/ -- -- Limitations : -- -- File history : -- -- 0208 : First complete release -- -- 0211 : Fixed interrupt cycle -- -- 0235 : Updated for T80 interface change -- -- 0238 : Updated for T80 interface change -- -- 0240 : Updated for T80 interface change -- -- 0242 : Updated for T80 interface change -- -- 0247 : Fixed bus req/ack cycle -- library IEEE; use IEEE.std_logic_1164.all; use IEEE.numeric_std.all; use work.T80_Pack.all; entity T80a is generic( Mode : integer := 0 -- 0 => Z80, 1 => Fast Z80, 2 => 8080, 3 => GB ); port( RESET_n : in std_logic; CLK_n : in std_logic; WAIT_n : in std_logic; INT_n : in std_logic; NMI_n : in std_logic; BUSRQ_n : in std_logic; M1_n : out std_logic; MREQ_n : out std_logic; IORQ_n : out std_logic; RD_n : out std_logic; WR_n : out std_logic; RFSH_n : out std_logic; HALT_n : out std_logic; BUSAK_n : out std_logic; A : out std_logic_vector(15 downto 0); D : inout std_logic_vector(7 downto 0) ); end T80a; architecture rtl of T80a is signal CEN : std_logic; signal Reset_s : std_logic; signal IntCycle_n : std_logic; signal IORQ : std_logic; signal NoRead : std_logic; signal Write : std_logic; signal MREQ : std_logic; signal MReq_Inhibit : std_logic; signal Req_Inhibit : std_logic; signal RD : std_logic; signal MREQ_n_i : std_logic; signal IORQ_n_i : std_logic; signal RD_n_i : std_logic; signal WR_n_i : std_logic; signal RFSH_n_i : std_logic; signal BUSAK_n_i : std_logic; signal A_i : std_logic_vector(15 downto 0); signal DO : std_logic_vector(7 downto 0); signal DI_Reg : std_logic_vector (7 downto 0); -- Input synchroniser signal Wait_s : std_logic; signal MCycle : std_logic_vector(2 downto 0); signal TState : std_logic_vector(2 downto 0); begin CEN <= '1'; BUSAK_n <= BUSAK_n_i; MREQ_n_i <= not MREQ or (Req_Inhibit and MReq_Inhibit); RD_n_i <= not RD or Req_Inhibit; MREQ_n <= MREQ_n_i when BUSAK_n_i = '1' else 'Z'; IORQ_n <= IORQ_n_i when BUSAK_n_i = '1' else 'Z'; RD_n <= RD_n_i when BUSAK_n_i = '1' else 'Z'; WR_n <= WR_n_i when BUSAK_n_i = '1' else 'Z'; RFSH_n <= RFSH_n_i when BUSAK_n_i = '1' else 'Z'; A <= A_i when BUSAK_n_i = '1' else (others => 'Z'); D <= DO when Write = '1' and BUSAK_n_i = '1' else (others => 'Z'); process (RESET_n, CLK_n) begin if RESET_n = '0' then Reset_s <= '0'; elsif CLK_n'event and CLK_n = '1' then Reset_s <= '1'; end if; end process; u0 : T80 generic map( Mode => Mode, IOWait => 1) port map( CEN => CEN, M1_n => M1_n, IORQ => IORQ, NoRead => NoRead, Write => Write, RFSH_n => RFSH_n_i, HALT_n => HALT_n, WAIT_n => Wait_s, INT_n => INT_n, NMI_n => NMI_n, RESET_n => Reset_s, BUSRQ_n => BUSRQ_n, BUSAK_n => BUSAK_n_i, CLK_n => CLK_n, A => A_i, DInst => D, DI => DI_Reg, DO => DO, MC => MCycle, TS => TState, IntCycle_n => IntCycle_n); process (CLK_n) begin if CLK_n'event and CLK_n = '0' then Wait_s <= WAIT_n; if TState = "011" and BUSAK_n_i = '1' then DI_Reg <= to_x01(D); end if; end if; end process; process (Reset_s,CLK_n) begin if Reset_s = '0' then WR_n_i <= '1'; elsif CLK_n'event and CLK_n = '1' then WR_n_i <= '1'; if TState = "001" then -- To short for IO writes !!!!!!!!!!!!!!!!!!! WR_n_i <= not Write; end if; end if; end process; process (Reset_s,CLK_n) begin if Reset_s = '0' then Req_Inhibit <= '0'; elsif CLK_n'event and CLK_n = '1' then if MCycle = "001" and TState = "010" then Req_Inhibit <= '1'; else Req_Inhibit <= '0'; end if; end if; end process; process (Reset_s,CLK_n) begin if Reset_s = '0' then MReq_Inhibit <= '0'; elsif CLK_n'event and CLK_n = '0' then if MCycle = "001" and TState = "010" then MReq_Inhibit <= '1'; else MReq_Inhibit <= '0'; end if; end if; end process; process(Reset_s,CLK_n) begin if Reset_s = '0' then RD <= '0'; IORQ_n_i <= '1'; MREQ <= '0'; elsif CLK_n'event and CLK_n = '0' then if MCycle = "001" then if TState = "001" then RD <= IntCycle_n; MREQ <= IntCycle_n; IORQ_n_i <= IntCycle_n; end if; if TState = "011" then RD <= '0'; IORQ_n_i <= '1'; MREQ <= '1'; end if; if TState = "100" then MREQ <= '0'; end if; else if TState = "001" and NoRead = '0' then RD <= not Write; IORQ_n_i <= not IORQ; MREQ <= not IORQ; end if; if TState = "011" then RD <= '0'; IORQ_n_i <= '1'; MREQ <= '0'; end if; end if; end if; end process; end;