OpenCores
URL https://opencores.org/ocsvn/z80soc/z80soc/trunk

Subversion Repositories z80soc

[/] [z80soc/] [trunk/] [V0.7.1a/] [rom/] [SoCv0.7b.z8a] - Rev 42

Compare with Previous | Blame | View Log

;
; Z80Soc V0.7 Demo ROM
; Ronivon C. Costa
; 2010 - 02 - 21
;

           ld          sp,BFFEH          ; Put Stack on top of memory
inicio:
           ld          a,(FFDFH)         ; Verify what is the development board
           or          a
           jr          z,de1
           call        set_lcd           ;is Z80soc-s3e
           jr          inic1
de1:
           ld          a,F0h
           out         (01h),a
           call        hexDisplay        ;is DE1, test 7 segment display
inic1:
           ld          a,0Fh
           out         (01h),a
           call        clear
           call        defineNewA
           ld          de,4034h
           ld          hl,Text1
           call        printmsg
           ld          de,405Ch
           ld          hl,Text2
           call        printmsg
           call        Border
           ld          de,4146h
           ld          hl,Text3
           call        printmsg
           ld          de,4196h
           ld          hl,Text4
           call        printmsg
           ld          de,41E6h
           ld          hl,Text5
           call        printmsg
           ld          de,4236h
           ld          hl,Text6
           call        printmsg
           ld          de,425Eh
           ld          hl,Text7
           call        printmsg
           ; check soz version
           ld          hl,DE1_Version
           ld          a,(FFDFh)
           or          a
           jr          z,print_v
           ld          hl,S3E_Version
print_v:
           ld          de,4087h
           call        printmsg
setprint:
           ld          de,42D6h
           ld          bc,30
loopprint:
           push        bc
           push        de
           call        delay
           call        rotate
           ld          a,(FFDFh)
           or          a
           jr          z,looppr2
           call        s3e_routine       ; Is Z80-S3E
looppr2:
           pop         de
           pop         bc
           call        read_kbd
           or          a
           jr          z,loopprint
           cp          41h
           jr          z,go_on
           out         (01H),a
           ld          l,a
           ld          a,(FFDFh)           ; get z80soc version
           or          a
           jr          nz,looppr3
           ld          a,l
           out         (11h),a             ; Use HEX display if DE1
looppr3:
           ld          a,l
           ld          (de),a
           inc         de
           dec         bc
           ld          a,b
           or          c
           jr          z,setprint
           jr          loopprint
go_on:
           ld          hl,6000h          ; RAM Address
           ld          a,0               ; Value to store in memory
loop1:
           ld          (hl),a            ; Store A into Memory (HL)
           inc         hl               ; Point to next memory location
           inc         a                ; Add 1 to value to store in memory
           jr          nz,loop1          ; If A not equal 0 continue loop1
                                ; When A=FFh, and we make A=A+1 ...
                                ; A becomes 100h
                                ; But, A is an 8 bits register, and
                                ; can only store the two last hex digits,
                                ; that is, 8 bits.
           call        read_key0       ; Wait until KEY0 is pressed
                                ;
           ld          hl,6000h          ; Get back the start RAM address
loop2:
           ld          a,(FFDFh)           ; get z80soc version
           or          a
           jr          nz,skip2_de1
           ld          a,h
           out         (11h),a
           ld          a,l
           out         (10h),a
skip2_de1:
           ld          a,(hl)             ; Read back the values stored in loop1
           out         (01h),a            ; Send to Green Leds
           call        delay              ; Call sub-routine to delay some time
           inc         hl                 ; Add 1 to the memory location
           ld          a,(hl)             ; Read the value in the memory
           cp          FFh               ; check if equal 255
           jr          nz,skip2_de1       ; If not equal 255, continue loop2
           ; end of First execution
           call         read_key0       ; Wait until KEY0 is pressed
           jP           inicio            ; Restart program
read_key0:
loop3:
           call         delay
           in           a,(30h)           ; Read KEYs (all 4 KEYs)
           cp           1               ; check if returns "00001110"
           jr           nz,loop3          ; KEY0 not pressed, continue checking
           ret                  
iodelay:
           in           a,(20h)           ; Read SW(7-0)
           or           a
           jr           nz,loop4
           ld           a,1       ; Read the number of times to loop
loop4:
           dec          a                ; Start counting backwards
           jr           nz,loop4          ; If A greather than 0, continue loop
           ret                  ; return to calling program
delay:
           in           a,(20h)           ; Read SW(7-0)
           or           a
           jr           nz,loop5
           ld           a,1
loop5:
           push  af
           ld    bc,5000             ; Every delay has at least 255 loops
loop6:
           dec   bc                ; Start counting backwards
           ld    a,b
           or    c
           jr    nz,loop6          ; If A greather than 0, continue loop
           pop   af               ; Get multiplier back
           dec   a                ;
           jr    nz,loop5
           ret                  ; return to calling program
clear:
        ld      a,0
        out     (91h),a      ; video cursor x = 0
        out     (92h),a      ; video cursor y = 0
        ld      bc,1200
clean_loop:
        ld      a,20h
        out     (90h),a      ; print character to video
                             ; cursor x,y is automatically updated
                             ; by hardware
        dec     bc
        ld      a,b
        or      c
        jr      nz,clean_loop
        ret
printmsg:

ploop:

           ld          a,(hl)
           or          a
           ret         z
           ld          (de),a
           inc         hl
           inc         de
           jr          ploop
read_kbd:
           in          a,(80h)
           ret
Border:
           ld          hl,Lineu
           ld          de,40F5H
           call        printmsg
           ld          de,411DH
           ld          a,10
brdloop:
           ld          hl,Column
           push        hl
           push        af
           push        de
           call        printmsg
           pop         de
           pop         af
           ld          hl,40
           add         hl,de
           ld          d,h
           ld          e,l
           pop         hl
           dec         a
           jr          nz,brdloop
           ld          hl,Lined
           call        printmsg
           ret
rotate:
           ; save first line of box
           ld          hl,411Eh
           ld          de,B000h
           ld          bc,30
           ldir
           ; move all lines up
           ld          hl,4146h ; this is second line of box
           ld          de,411Eh ; this is first line of box
           ld          b,9
loop_rotate:
           push        bc
           push        hl
           push        de
           ld          bc,30
           ldir
           pop         de
           ld          hl,40
           add         hl,de
           ld          d,h
           ld          e,l
           pop         hl
           ld          bc,40
           add         hl,bc
           pop         bc
           djnz        loop_rotate
           ; now get back the first line saved in 9000h
           ; and put on the last line of box
           ld          hl,B000h
           ld          bc,30
           ldir
           ret
s3e_routine:
           ; print message in LCD display
           ; Check of Rotary Knob is moving
           call        read_rot
           ; Is it rotating to the right ?
           cp          1
           jr          nz,check_left
           call        roll_lcd_right
           ld          a,1
           jr          printlcd

check_left:
           ; Is it rotating to the left?
           cp          2
           jr          nz,dec_jump
           call        roll_lcd_left
           ld          a,128
printlcd:
           out         (01h),a
           ld          de,FFE0h
           ld          hl,9100h
           call        printmsg
dec_jump:
           ret
set_lcd:
           ld          de,9100h
           ld          hl,lcdtxt
           ld          bc,33
           ldir
           ld          de,FFE0h
           ld          hl,9100h
           ld          bc,32
           ldir
           ret
read_rot:
           ;CALL        DELAY_MULT
           ;LD          A,0
           ;RET         NZ
           IN          A,(70H)
           RET

DELAY_ROT:
           LD          A,(9200H)
           DEC         A
           LD          (9200H),A
           RET
DELAY_MULT:
           LD          A,(9201H)
           DEC         A
           JR          NZ,DLY_M1
           LD          A,10H
DLY_M1:
           LD          (9201H),A
           RET

roll_lcd_left:
           ; save the first char on the left, for every line
           ld        a,(9100h)
           ld        (9202H),a
           ld        a,(9110h)
           ld        (9203H),a
           ld        HL,9101H
           ld        de,9100h
           ld        bc,31
           ldir
           ld        a,(9202h)
           ld        (910Fh),a
           ld        a,(9203h)
           ld        (911Fh),a
           ret
roll_lcd_right:
           ; save the first char on the left, for every line
           ld        a,(910Fh)
           ld        (9202H),a
           ld        a,(911Fh)
           ld        (9203H),a
           ld        HL,911EH
           ld        de,911Fh
           ld        bc,31
           lddr
           ld        a,(9202h)
           ld        (9100h),a
           ld        a,(9203h)
           ld        (9110h),a
           ret
defineNewA:
           ld        hl,newCharA
           ld        de,4E88h   ; this is the char ram addres of "A"
                                ; which is "4C80h + 65 * 8"
                                ; 4C80h = initial char ram address
                                ; 65 = ASCCII of "A"
                                ; 8  = 8 bytes for each char
           ld        bc,8
           ldir
           ret
hexDisplay:
           ld        a,20h
           out       (10h),a
           ld        a,10h
           out       (11h),a
           ret
           ;                    character set: lat9-08
Text1:
           db                   "Z80 SYSTEM ON CHIP"
           db                   0
Text2:
           db                   "RONIVON COSTA 2010"
           db                   0
Text3:
           db                   0
Text4:
           db                   "  ABCDEFGHIJKLMNOPQRSTUVWXYZ"
           db                   0
Text5:
           db                   "  abcdefghijklmnopqrstuvwxyz"
           db                   0
Text6:
           db                   "         0123456789"
           db                   0
Text7:
           db                   2,3,4,11,12,13,14,18,24,25,26,27,232,233,235,187,188,138,134,135,129,128,1,6,7,8,9,10,29,31
           db                   0
Lineu:
           db                   150,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,156
           db                   0
Lined:
           db                   147,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,154,153
           db                   0

Column:
           db                   149
           db                   "                              "
           db                   149
           db                   0
lcdtxt:
           db                   "   Z80 SYSTEM   "
           db                   " RONIVON  COSTA "
           db                   0
DE1_Version:
           db                   "DE1 Version"
           db                   0
S3E_Version:
           db                   "S3E Version"
           db                   0
newCharA:
           db                   FFh  ;11111111
           db                   81h  ;10000001
           db                   99h  ;10011001
           db                   A5h  ;10100101
           db                   BDh  ;10111101
           db                   A5h  ;10100101
           db                   81h  ;10000001
           db                   FFh  ;11111111

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.