URL
https://opencores.org/ocsvn/z80soc/z80soc/trunk
Subversion Repositories z80soc
[/] [z80soc/] [trunk/] [V0.7.2/] [DE1/] [vhdl/] [vga_sync.vhd.bak] - Rev 44
Compare with Previous | Blame | View Log
library IEEE;use IEEE.STD_LOGIC_1164.all;use IEEE.STD_LOGIC_ARITH.all;use IEEE.STD_LOGIC_UNSIGNED.all;-- Module Generates Video Sync Signals for Video Montor Interface-- RGB and Sync outputs tie directly to monitor conector pinsENTITY VGA_SYNC ISPORT( clock_25Mhz : IN STD_LOGIC;red, green, blue : IN STD_LOGIC_VECTOR(3 DOWNTO 0);red_out, green_out, blue_out : OUT STD_LOGIC_VECTOR(3 DOWNTO 0);horiz_sync_out, vert_sync_out,video_on, pixel_clock : OUT STD_LOGIC;pixel_row, pixel_column : OUT STD_LOGIC_VECTOR(9 DOWNTO 0));END VGA_SYNC;ARCHITECTURE a OF VGA_SYNC ISSIGNAL horiz_sync, vert_sync : STD_LOGIC;SIGNAL video_on_int, video_on_v, video_on_h : STD_LOGIC;SIGNAL h_count, v_count :STD_LOGIC_VECTOR(9 DOWNTO 0);---- To select a different screen resolution, clock rate, and refresh rate-- pick a set of new video timing constant values from table at end of code section-- enter eight new sync timing constants below and-- adjust PLL frequency output to pixel clock rate from table-- using MegaWizard to edit video_PLL.vhd-- Horizontal Timing ConstantsCONSTANT H_pixels_across: Natural := 640;CONSTANT H_sync_low: Natural := 664;CONSTANT H_sync_high: Natural := 760;CONSTANT H_end_count: Natural := 800;-- Vertical Timing ConstantsCONSTANT V_pixels_down: Natural := 480;CONSTANT V_sync_low: Natural := 491;CONSTANT V_sync_high: Natural := 493;CONSTANT V_end_count: Natural := 525;BEGIN-- video_on is high only when RGB pixel data is being displayed-- used to blank color signals at screen edges during retracevideo_on_int <= video_on_H AND video_on_V;-- output pixel clock and video on for external user logicpixel_clock <= clock_25Mhz;video_on <= video_on_int;PROCESSBEGINWAIT UNTIL(clock_25Mhz'EVENT) AND (clock_25Mhz='1');--Generate Horizontal and Vertical Timing Signals for Video Signal-- H_count counts pixels (#pixels across + extra time for sync signals)---- Horiz_sync ------------------------------------__________---------- H_count 0 #pixels sync low end--IF (h_count = H_end_count) THENh_count <= "0000000000";ELSEh_count <= h_count + 1;END IF;--Generate Horizontal Sync Signal using H_countIF (h_count <= H_sync_high) AND (h_count >= H_sync_low) THENhoriz_sync <= '0';ELSEhoriz_sync <= '1';END IF;--V_count counts rows of pixels (#pixel rows down + extra time for V sync signal)---- Vert_sync -----------------------------------------------_______-------------- V_count 0 last pixel row V sync low end--IF (v_count >= V_end_count) AND (h_count >= H_sync_low) THENv_count <= "0000000000";ELSIF (h_count = H_sync_low) THENv_count <= v_count + 1;END IF;-- Generate Vertical Sync Signal using V_countIF (v_count <= V_sync_high) AND (v_count >= V_sync_low) THENvert_sync <= '0';ELSEvert_sync <= '1';END IF;-- Generate Video on Screen Signals for Pixel Data-- Video on = 1 indicates pixel are being displayed-- Video on = 0 retrace - user logic can update pixel-- memory without needing to read memory for displayIF (h_count < H_pixels_across) THENvideo_on_h <= '1';pixel_column <= h_count;ELSEvideo_on_h <= '0';END IF;IF (v_count <= V_pixels_down) THENvideo_on_v <= '1';pixel_row <= v_count;ELSEvideo_on_v <= '0';END IF;-- Put all video signals through DFFs to elminate any small timing delays that cause a blurry imagehoriz_sync_out <= horiz_sync;vert_sync_out <= vert_sync;red_out <= red AND video_on_int & video_on_int & video_on_int & video_on_int;green_out <= green AND video_on_int & video_on_int & video_on_int & video_on_int;blue_out <= blue AND video_on_int & video_on_int & video_on_int & video_on_int;END PROCESS;END a;---- Common Video Modes - pixel clock and sync counter values---- Mode Refresh Hor. Sync Pixel clock Interlaced? VESA?-- -------------------------------------------------------------- 640x480 60Hz 31.5khz 25.175Mhz No No-- 640x480 63Hz 32.8khz 28.322Mhz No No-- 640x480 70Hz 36.5khz 31.5Mhz No No-- 640x480 72Hz 37.9khz 31.5Mhz No Yes-- 800x600 56Hz 35.1khz 36.0Mhz No Yes-- 800x600 56Hz 35.4khz 36.0Mhz No No-- 800x600 60Hz 37.9khz 40.0Mhz No Yes-- 800x600 60Hz 37.9khz 40.0Mhz No No-- 800x600 72Hz 48.0khz 50.0Mhz No Yes-- 1024x768 60Hz 48.4khz 65.0Mhz No Yes-- 1024x768 60Hz 48.4khz 62.0Mhz No No-- 1024x768 70Hz 56.5khz 75.0Mhz No Yes-- 1024x768 70Hz 56.25khz 72.0Mhz No No-- 1024x768 76Hz 62.5khz 85.0Mhz No No-- 1280x1024 59Hz 63.6khz 110.0Mhz No No-- 1280x1024 61Hz 64.24khz 110.0Mhz No No-- 1280x1024 74Hz 78.85khz 135.0Mhz No No---- Pixel clock within 5% works on most monitors.-- Faster clocks produce higher refresh rates at the same resolution on-- most new monitors up to the maximum rate.-- Some older monitors may not support higher refresh rates-- or may only sync at specific refresh rates - VESA modes most common.-- Pixel clock within 5% works on most old monitors.-- Refresh rates below 60Hz will have some flicker.-- Bad values such as very high refresh rates may damage some monitors-- that do not support faster refreseh rates - check monitor specs.---- Small adjustments to the sync low count ranges can be used to move-- video image left, right (H), down or up (V) on the monitor------ 640x480@60Hz Non-Interlaced mode-- Horizontal Sync = 31.5kHz-- Timing: H=(0.95us, 3.81us, 1.59us), V=(0.35ms, 0.064ms, 1.02ms)---- clock horizontal timing vertical timing flags-- Mhz pix.col low high end pix.rows low high end--640x480 25.175 640 664 760 800 480 491 493 525-- <-> <->-- sync pulses: Horiz----------___------ Vert-----------___----------- Alternate 640x480@60Hz Non-Interlaced mode-- Horizontal Sync = 31.5kHz-- Timing: H=(1.27us, 3.81us, 1.27us) V=(0.32ms, 0.06ms, 1.05ms)---- name clock horizontal timing vertical timing flags--640x480 25.175 640 672 768 800 480 490 492 525------ 640x480@63Hz Non-Interlaced mode (non-standard)-- Horizontal Sync = 32.8kHz-- Timing: H=(1.41us, 1.41us, 5.08us) V=(0.24ms, 0.092ms, 0.92ms)---- name clock horizontal timing vertical timing flags--640x480 28.322 640 680 720 864 480 488 491 521------ 640x480@70Hz Non-Interlaced mode (non-standard)-- Horizontal Sync = 36.5kHz-- Timing: H=(1.27us, 1.27us, 4.57us) V=(0.22ms, 0.082ms, 0.82ms)---- name clock horizontal timing vertical timing flags--640x480 31.5 640 680 720 864 480 488 491 521------ VESA 640x480@72Hz Non-Interlaced mode-- Horizontal Sync = 37.9kHz-- Timing: H=(0.76us, 1.27us, 4.06us) V=(0.24ms, 0.079ms, 0.74ms)---- name clock horizontal timing vertical timing flags--640x480 31.5 640 664 704 832 480 489 492 520------ VESA 800x600@56Hz Non-Interlaced mode-- Horizontal Sync = 35.1kHz-- Timing: H=(0.67us, 2.00us, 3.56us) V=(0.03ms, 0.063ms, 0.70ms)---- name clock horizontal timing vertical timing flags--800x600 36 800 824 896 1024 600 601 603 625------ Alternate 800x600@56Hz Non-Interlaced mode-- Horizontal Sync = 35.4kHz-- Timing: H=(0.89us, 4.00us, 1.11us) V=(0.11ms, 0.057ms, 0.79ms)---- name clock horizontal timing vertical timing flags--800x600 36 800 832 976 1016 600 604 606 634------ VESA 800x600@60Hz Non-Interlaced mode-- Horizontal Sync = 37.9kHz-- Timing: H=(1.00us, 3.20us, 2.20us) V=(0.03ms, 0.106ms, 0.61ms)---- name clock horizontal timing vertical timing flags--800x600 40 800 840 968 1056 600 601 605 628 +hsync +vsync------ Alternate 800x600@60Hz Non-Interlaced mode-- Horizontal Sync = 37.9kHz-- Timing: H=(1.20us, 3.80us, 1.40us) V=(0.13ms, 0.053ms, 0.69ms)---- name clock horizontal timing vertical timing flags--800x600 40 800 848 1000 1056 600 605 607 633------ VESA 800x600@72Hz Non-Interlaced mode-- Horizontal Sync = 48kHz-- Timing: H=(1.12us, 2.40us, 1.28us) V=(0.77ms, 0.13ms, 0.48ms)---- name clock horizontal timing vertical timing flags--800x600 50 800 856 976 1040 600 637 643 666 +hsync +vsync------ VESA 1024x768@60Hz Non-Interlaced mode-- Horizontal Sync = 48.4kHz-- Timing: H=(0.12us, 2.22us, 2.58us) V=(0.06ms, 0.12ms, 0.60ms)---- name clock horizontal timing vertical timing flags--1024x768 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync------ 1024x768@60Hz Non-Interlaced mode (non-standard dot-clock)-- Horizontal Sync = 48.4kHz-- Timing: H=(0.65us, 2.84us, 0.65us) V=(0.12ms, 0.041ms, 0.66ms)---- name clock horizontal timing vertical timing flags--1024x768 62 1024 1064 1240 1280 768 774 776 808------ VESA 1024x768@70Hz Non-Interlaced mode-- Horizontal Sync=56.5kHz-- Timing: H=(0.32us, 1.81us, 1.92us) V=(0.05ms, 0.14ms, 0.51ms)---- name clock horizontal timing vertical timing flags--1024x768 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync------ 1024x768@70Hz Non-Interlaced mode (non-standard dot-clock)-- Horizontal Sync=56.25kHz-- Timing: H=(0.44us, 1.89us, 1.22us) V=(0.036ms, 0.11ms, 0.53ms)---- name clock horizontal timing vertical timing flags--1024x768 72 1024 1056 1192 1280 768 770 776 806 -hsync -vsync------ 1024x768@76Hz Non-Interlaced mode-- Horizontal Sync=62.5kHz-- Timing: H=(0.09us, 1.41us, 2.45us) V=(0.09ms, 0.048ms, 0.62ms)---- name clock horizontal timing vertical timing flags--1024x768 85 1024 1032 1152 1360 768 784 787 823------ 1280x1024@59Hz Non-Interlaced mode (non-standard)-- Horizontal Sync=63.6kHz-- Timing: H=(0.36us, 1.45us, 2.25us) V=(0.08ms, 0.11ms, 0.65ms)---- name clock horizontal timing vertical timing flags--1280x1024 110 1280 1320 1480 1728 1024 1029 1036 1077------ 1280x1024@61Hz, Non-Interlaced mode-- Horizontal Sync=64.25kHz-- Timing: H=(0.44us, 1.67us, 1.82us) V=(0.02ms, 0.05ms, 0.41ms)---- name clock horizontal timing vertical timing flags--1280x1024 110 1280 1328 1512 1712 1024 1025 1028 1054------ 1280x1024@74Hz, Non-Interlaced mode-- Horizontal Sync=78.85kHz-- Timing: H=(0.24us, 1.07us, 1.90us) V=(0.04ms, 0.04ms, 0.43ms)---- name clock horizontal timing vertical timing flags--1280x1024 135 1280 1312 1456 1712 1024 1027 1030 1064---- VGA female connector: 15 pin small "D" connector-- _________________________-- \ 5 4 3 2 1 /-- \ 10 X 8 7 6 /-- \ 15 14 13 12 11 /-- \_________________/-- Signal Name Pin Number Notes-- ------------------------------------------------------------------------- RED video 1 Analog signal, around 0.7 volt, peak-to-peak 75 ohm-- GREEN video 2 Analog signal, sround 0.7 volt, peak-to-peak 75 ohm-- BLUE video 3 Analog signal, around 0.7 volt, peak-to-peak 75 ohm-- Monitor ID #2 4-- Digital Ground 5 Ground for the video system.-- RED ground 6 \ The RGB color video signals each have a separate-- GREEN ground 7 | ground connection.-- BLUE ground 8 /-- KEY 9 (X = Not present)-- SYNC ground 10 TTL return for the SYNC lines.-- Monitor ID #0 11-- Monitor ID #1 12-- Horizontal Sync 13 Digital levels (0 to 5 volts, TTL output)-- Vertical Sync 14 Digital levels (0 to 5 volts, TTL output)-- Not Connected 15 (Not used)--
