URL
https://opencores.org/ocsvn/z80soc/z80soc/trunk
Subversion Repositories z80soc
[/] [z80soc/] [trunk/] [V0.7.3/] [DE2115/] [db/] [altsyncram_9pn1.tdf] - Rev 46
Compare with Previous | Blame | View Log
--altsyncram ADDRESS_REG_B="CLOCK1" CBX_DECLARE_ALL_CONNECTED_PORTS="OFF" CLOCK_ENABLE_INPUT_A="BYPASS" CLOCK_ENABLE_INPUT_B="BYPASS" CLOCK_ENABLE_OUTPUT_A="BYPASS" CLOCK_ENABLE_OUTPUT_B="BYPASS" CYCLONEII_M4K_COMPATIBILITY="ON" DEVICE_FAMILY="Cyclone IV E" INIT_FILE="../rom/lat9-08.mif" LOW_POWER_MODE="AUTO" NUMWORDS_A=2048 NUMWORDS_B=2048 OPERATION_MODE="DUAL_PORT" OUTDATA_ACLR_B="NONE" OUTDATA_REG_B="UNREGISTERED" POWER_UP_UNINITIALIZED="FALSE" WIDTH_A=8 WIDTH_B=8 WIDTH_BYTEENA_A=1 WIDTHAD_A=11 WIDTHAD_B=11 address_a address_b clock0 clock1 data_a q_b wren_a CARRY_CHAIN="MANUAL" CARRY_CHAIN_LENGTH=48
--VERSION_BEGIN 13.0 cbx_altsyncram 2013:06:12:18:03:43:SJ cbx_cycloneii 2013:06:12:18:03:43:SJ cbx_lpm_add_sub 2013:06:12:18:03:43:SJ cbx_lpm_compare 2013:06:12:18:03:43:SJ cbx_lpm_decode 2013:06:12:18:03:43:SJ cbx_lpm_mux 2013:06:12:18:03:43:SJ cbx_mgl 2013:06:12:18:05:10:SJ cbx_stratix 2013:06:12:18:03:43:SJ cbx_stratixii 2013:06:12:18:03:43:SJ cbx_stratixiii 2013:06:12:18:03:43:SJ cbx_stratixv 2013:06:12:18:03:43:SJ cbx_util_mgl 2013:06:12:18:03:43:SJ VERSION_END
-- Copyright (C) 1991-2013 Altera Corporation
-- Your use of Altera Corporation's design tools, logic functions
-- and other software and tools, and its AMPP partner logic
-- functions, and any output files from any of the foregoing
-- (including device programming or simulation files), and any
-- associated documentation or information are expressly subject
-- to the terms and conditions of the Altera Program License
-- Subscription Agreement, Altera MegaCore Function License
-- Agreement, or other applicable license agreement, including,
-- without limitation, that your use is for the sole purpose of
-- programming logic devices manufactured by Altera and sold by
-- Altera or its authorized distributors. Please refer to the
-- applicable agreement for further details.
FUNCTION cycloneive_ram_block (clk0, clk1, clr0, clr1, ena0, ena1, ena2, ena3, portaaddr[PORT_A_ADDRESS_WIDTH-1..0], portaaddrstall, portabyteenamasks[PORT_A_BYTE_ENABLE_MASK_WIDTH-1..0], portadatain[PORT_A_DATA_WIDTH-1..0], portare, portawe, portbaddr[PORT_B_ADDRESS_WIDTH-1..0], portbaddrstall, portbbyteenamasks[PORT_B_BYTE_ENABLE_MASK_WIDTH-1..0], portbdatain[PORT_B_DATA_WIDTH-1..0], portbre, portbwe)
WITH ( CLK0_CORE_CLOCK_ENABLE, CLK0_INPUT_CLOCK_ENABLE, CLK0_OUTPUT_CLOCK_ENABLE, CLK1_CORE_CLOCK_ENABLE, CLK1_INPUT_CLOCK_ENABLE, CLK1_OUTPUT_CLOCK_ENABLE, CONNECTIVITY_CHECKING, DATA_INTERLEAVE_OFFSET_IN_BITS, DATA_INTERLEAVE_WIDTH_IN_BITS, DONT_POWER_OPTIMIZE, INIT_FILE, INIT_FILE_LAYOUT, init_file_restructured, LOGICAL_RAM_NAME, mem_init0, mem_init1, mem_init2, mem_init3, mem_init4, MIXED_PORT_FEED_THROUGH_MODE, OPERATION_MODE, PORT_A_ADDRESS_CLEAR, PORT_A_ADDRESS_WIDTH = 1, PORT_A_BYTE_ENABLE_MASK_WIDTH = 1, PORT_A_BYTE_SIZE, PORT_A_DATA_OUT_CLEAR, PORT_A_DATA_OUT_CLOCK, PORT_A_DATA_WIDTH = 1, PORT_A_FIRST_ADDRESS, PORT_A_FIRST_BIT_NUMBER, PORT_A_LAST_ADDRESS, PORT_A_LOGICAL_RAM_DEPTH, PORT_A_LOGICAL_RAM_WIDTH, PORT_A_READ_DURING_WRITE_MODE, PORT_B_ADDRESS_CLEAR, PORT_B_ADDRESS_CLOCK, PORT_B_ADDRESS_WIDTH = 1, PORT_B_BYTE_ENABLE_CLOCK, PORT_B_BYTE_ENABLE_MASK_WIDTH = 1, PORT_B_BYTE_SIZE, PORT_B_DATA_IN_CLOCK, PORT_B_DATA_OUT_CLEAR, PORT_B_DATA_OUT_CLOCK, PORT_B_DATA_WIDTH = 1, PORT_B_FIRST_ADDRESS, PORT
_B_FIRST_BIT_NUMBER, PORT_B_LAST_ADDRESS, PORT_B_LOGICAL_RAM_DEPTH, PORT_B_LOGICAL_RAM_WIDTH, PORT_B_READ_DURING_WRITE_MODE, PORT_B_READ_ENABLE_CLOCK, PORT_B_WRITE_ENABLE_CLOCK, POWER_UP_UNINITIALIZED, RAM_BLOCK_TYPE, SAFE_WRITE, WIDTH_ECCSTATUS)
RETURNS ( portadataout[PORT_A_DATA_WIDTH-1..0], portbdataout[PORT_B_DATA_WIDTH-1..0]);
--synthesis_resources = M9K 2
OPTIONS ALTERA_INTERNAL_OPTION = "OPTIMIZE_POWER_DURING_SYNTHESIS=NORMAL_COMPILATION";
SUBDESIGN altsyncram_9pn1
(
address_a[10..0] : input;
address_b[10..0] : input;
clock0 : input;
clock1 : input;
data_a[7..0] : input;
q_b[7..0] : output;
wren_a : input;
)
VARIABLE
ram_block1a0 : cycloneive_ram_block
WITH (
CLK0_CORE_CLOCK_ENABLE = "ena0",
CLK0_INPUT_CLOCK_ENABLE = "none",
CLK1_CORE_CLOCK_ENABLE = "none",
CLK1_INPUT_CLOCK_ENABLE = "none",
CONNECTIVITY_CHECKING = "OFF",
INIT_FILE = "../rom/lat9-08.mif",
INIT_FILE_LAYOUT = "port_b",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
OPERATION_MODE = "dual_port",
PORT_A_ADDRESS_WIDTH = 11,
PORT_A_DATA_WIDTH = 1,
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 0,
PORT_A_LAST_ADDRESS = 2047,
PORT_A_LOGICAL_RAM_DEPTH = 2048,
PORT_A_LOGICAL_RAM_WIDTH = 8,
PORT_B_ADDRESS_CLEAR = "none",
PORT_B_ADDRESS_CLOCK = "clock1",
PORT_B_ADDRESS_WIDTH = 11,
PORT_B_DATA_OUT_CLEAR = "none",
PORT_B_DATA_WIDTH = 1,
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 0,
PORT_B_LAST_ADDRESS = 2047,
PORT_B_LOGICAL_RAM_DEPTH = 2048,
PORT_B_LOGICAL_RAM_WIDTH = 8,
PORT_B_READ_ENABLE_CLOCK = "clock1",
POWER_UP_UNINITIALIZED = "false",
RAM_BLOCK_TYPE = "AUTO"
);
ram_block1a1 : cycloneive_ram_block
WITH (
CLK0_CORE_CLOCK_ENABLE = "ena0",
CLK0_INPUT_CLOCK_ENABLE = "none",
CLK1_CORE_CLOCK_ENABLE = "none",
CLK1_INPUT_CLOCK_ENABLE = "none",
CONNECTIVITY_CHECKING = "OFF",
INIT_FILE = "../rom/lat9-08.mif",
INIT_FILE_LAYOUT = "port_b",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
OPERATION_MODE = "dual_port",
PORT_A_ADDRESS_WIDTH = 11,
PORT_A_DATA_WIDTH = 1,
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 1,
PORT_A_LAST_ADDRESS = 2047,
PORT_A_LOGICAL_RAM_DEPTH = 2048,
PORT_A_LOGICAL_RAM_WIDTH = 8,
PORT_B_ADDRESS_CLEAR = "none",
PORT_B_ADDRESS_CLOCK = "clock1",
PORT_B_ADDRESS_WIDTH = 11,
PORT_B_DATA_OUT_CLEAR = "none",
PORT_B_DATA_WIDTH = 1,
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 1,
PORT_B_LAST_ADDRESS = 2047,
PORT_B_LOGICAL_RAM_DEPTH = 2048,
PORT_B_LOGICAL_RAM_WIDTH = 8,
PORT_B_READ_ENABLE_CLOCK = "clock1",
POWER_UP_UNINITIALIZED = "false",
RAM_BLOCK_TYPE = "AUTO"
);
ram_block1a2 : cycloneive_ram_block
WITH (
CLK0_CORE_CLOCK_ENABLE = "ena0",
CLK0_INPUT_CLOCK_ENABLE = "none",
CLK1_CORE_CLOCK_ENABLE = "none",
CLK1_INPUT_CLOCK_ENABLE = "none",
CONNECTIVITY_CHECKING = "OFF",
INIT_FILE = "../rom/lat9-08.mif",
INIT_FILE_LAYOUT = "port_b",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
OPERATION_MODE = "dual_port",
PORT_A_ADDRESS_WIDTH = 11,
PORT_A_DATA_WIDTH = 1,
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 2,
PORT_A_LAST_ADDRESS = 2047,
PORT_A_LOGICAL_RAM_DEPTH = 2048,
PORT_A_LOGICAL_RAM_WIDTH = 8,
PORT_B_ADDRESS_CLEAR = "none",
PORT_B_ADDRESS_CLOCK = "clock1",
PORT_B_ADDRESS_WIDTH = 11,
PORT_B_DATA_OUT_CLEAR = "none",
PORT_B_DATA_WIDTH = 1,
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 2,
PORT_B_LAST_ADDRESS = 2047,
PORT_B_LOGICAL_RAM_DEPTH = 2048,
PORT_B_LOGICAL_RAM_WIDTH = 8,
PORT_B_READ_ENABLE_CLOCK = "clock1",
POWER_UP_UNINITIALIZED = "false",
RAM_BLOCK_TYPE = "AUTO"
);
ram_block1a3 : cycloneive_ram_block
WITH (
CLK0_CORE_CLOCK_ENABLE = "ena0",
CLK0_INPUT_CLOCK_ENABLE = "none",
CLK1_CORE_CLOCK_ENABLE = "none",
CLK1_INPUT_CLOCK_ENABLE = "none",
CONNECTIVITY_CHECKING = "OFF",
INIT_FILE = "../rom/lat9-08.mif",
INIT_FILE_LAYOUT = "port_b",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
OPERATION_MODE = "dual_port",
PORT_A_ADDRESS_WIDTH = 11,
PORT_A_DATA_WIDTH = 1,
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 3,
PORT_A_LAST_ADDRESS = 2047,
PORT_A_LOGICAL_RAM_DEPTH = 2048,
PORT_A_LOGICAL_RAM_WIDTH = 8,
PORT_B_ADDRESS_CLEAR = "none",
PORT_B_ADDRESS_CLOCK = "clock1",
PORT_B_ADDRESS_WIDTH = 11,
PORT_B_DATA_OUT_CLEAR = "none",
PORT_B_DATA_WIDTH = 1,
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 3,
PORT_B_LAST_ADDRESS = 2047,
PORT_B_LOGICAL_RAM_DEPTH = 2048,
PORT_B_LOGICAL_RAM_WIDTH = 8,
PORT_B_READ_ENABLE_CLOCK = "clock1",
POWER_UP_UNINITIALIZED = "false",
RAM_BLOCK_TYPE = "AUTO"
);
ram_block1a4 : cycloneive_ram_block
WITH (
CLK0_CORE_CLOCK_ENABLE = "ena0",
CLK0_INPUT_CLOCK_ENABLE = "none",
CLK1_CORE_CLOCK_ENABLE = "none",
CLK1_INPUT_CLOCK_ENABLE = "none",
CONNECTIVITY_CHECKING = "OFF",
INIT_FILE = "../rom/lat9-08.mif",
INIT_FILE_LAYOUT = "port_b",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
OPERATION_MODE = "dual_port",
PORT_A_ADDRESS_WIDTH = 11,
PORT_A_DATA_WIDTH = 1,
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 4,
PORT_A_LAST_ADDRESS = 2047,
PORT_A_LOGICAL_RAM_DEPTH = 2048,
PORT_A_LOGICAL_RAM_WIDTH = 8,
PORT_B_ADDRESS_CLEAR = "none",
PORT_B_ADDRESS_CLOCK = "clock1",
PORT_B_ADDRESS_WIDTH = 11,
PORT_B_DATA_OUT_CLEAR = "none",
PORT_B_DATA_WIDTH = 1,
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 4,
PORT_B_LAST_ADDRESS = 2047,
PORT_B_LOGICAL_RAM_DEPTH = 2048,
PORT_B_LOGICAL_RAM_WIDTH = 8,
PORT_B_READ_ENABLE_CLOCK = "clock1",
POWER_UP_UNINITIALIZED = "false",
RAM_BLOCK_TYPE = "AUTO"
);
ram_block1a5 : cycloneive_ram_block
WITH (
CLK0_CORE_CLOCK_ENABLE = "ena0",
CLK0_INPUT_CLOCK_ENABLE = "none",
CLK1_CORE_CLOCK_ENABLE = "none",
CLK1_INPUT_CLOCK_ENABLE = "none",
CONNECTIVITY_CHECKING = "OFF",
INIT_FILE = "../rom/lat9-08.mif",
INIT_FILE_LAYOUT = "port_b",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
OPERATION_MODE = "dual_port",
PORT_A_ADDRESS_WIDTH = 11,
PORT_A_DATA_WIDTH = 1,
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 5,
PORT_A_LAST_ADDRESS = 2047,
PORT_A_LOGICAL_RAM_DEPTH = 2048,
PORT_A_LOGICAL_RAM_WIDTH = 8,
PORT_B_ADDRESS_CLEAR = "none",
PORT_B_ADDRESS_CLOCK = "clock1",
PORT_B_ADDRESS_WIDTH = 11,
PORT_B_DATA_OUT_CLEAR = "none",
PORT_B_DATA_WIDTH = 1,
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 5,
PORT_B_LAST_ADDRESS = 2047,
PORT_B_LOGICAL_RAM_DEPTH = 2048,
PORT_B_LOGICAL_RAM_WIDTH = 8,
PORT_B_READ_ENABLE_CLOCK = "clock1",
POWER_UP_UNINITIALIZED = "false",
RAM_BLOCK_TYPE = "AUTO"
);
ram_block1a6 : cycloneive_ram_block
WITH (
CLK0_CORE_CLOCK_ENABLE = "ena0",
CLK0_INPUT_CLOCK_ENABLE = "none",
CLK1_CORE_CLOCK_ENABLE = "none",
CLK1_INPUT_CLOCK_ENABLE = "none",
CONNECTIVITY_CHECKING = "OFF",
INIT_FILE = "../rom/lat9-08.mif",
INIT_FILE_LAYOUT = "port_b",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
OPERATION_MODE = "dual_port",
PORT_A_ADDRESS_WIDTH = 11,
PORT_A_DATA_WIDTH = 1,
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 6,
PORT_A_LAST_ADDRESS = 2047,
PORT_A_LOGICAL_RAM_DEPTH = 2048,
PORT_A_LOGICAL_RAM_WIDTH = 8,
PORT_B_ADDRESS_CLEAR = "none",
PORT_B_ADDRESS_CLOCK = "clock1",
PORT_B_ADDRESS_WIDTH = 11,
PORT_B_DATA_OUT_CLEAR = "none",
PORT_B_DATA_WIDTH = 1,
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 6,
PORT_B_LAST_ADDRESS = 2047,
PORT_B_LOGICAL_RAM_DEPTH = 2048,
PORT_B_LOGICAL_RAM_WIDTH = 8,
PORT_B_READ_ENABLE_CLOCK = "clock1",
POWER_UP_UNINITIALIZED = "false",
RAM_BLOCK_TYPE = "AUTO"
);
ram_block1a7 : cycloneive_ram_block
WITH (
CLK0_CORE_CLOCK_ENABLE = "ena0",
CLK0_INPUT_CLOCK_ENABLE = "none",
CLK1_CORE_CLOCK_ENABLE = "none",
CLK1_INPUT_CLOCK_ENABLE = "none",
CONNECTIVITY_CHECKING = "OFF",
INIT_FILE = "../rom/lat9-08.mif",
INIT_FILE_LAYOUT = "port_b",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
OPERATION_MODE = "dual_port",
PORT_A_ADDRESS_WIDTH = 11,
PORT_A_DATA_WIDTH = 1,
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 7,
PORT_A_LAST_ADDRESS = 2047,
PORT_A_LOGICAL_RAM_DEPTH = 2048,
PORT_A_LOGICAL_RAM_WIDTH = 8,
PORT_B_ADDRESS_CLEAR = "none",
PORT_B_ADDRESS_CLOCK = "clock1",
PORT_B_ADDRESS_WIDTH = 11,
PORT_B_DATA_OUT_CLEAR = "none",
PORT_B_DATA_WIDTH = 1,
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 7,
PORT_B_LAST_ADDRESS = 2047,
PORT_B_LOGICAL_RAM_DEPTH = 2048,
PORT_B_LOGICAL_RAM_WIDTH = 8,
PORT_B_READ_ENABLE_CLOCK = "clock1",
POWER_UP_UNINITIALIZED = "false",
RAM_BLOCK_TYPE = "AUTO"
);
address_a_wire[10..0] : WIRE;
address_b_wire[10..0] : WIRE;
BEGIN
ram_block1a[7..0].clk0 = clock0;
ram_block1a[7..0].clk1 = clock1;
ram_block1a[7..0].ena0 = wren_a;
ram_block1a[7..0].portaaddr[] = ( address_a_wire[10..0]);
ram_block1a[0].portadatain[] = ( data_a[0..0]);
ram_block1a[1].portadatain[] = ( data_a[1..1]);
ram_block1a[2].portadatain[] = ( data_a[2..2]);
ram_block1a[3].portadatain[] = ( data_a[3..3]);
ram_block1a[4].portadatain[] = ( data_a[4..4]);
ram_block1a[5].portadatain[] = ( data_a[5..5]);
ram_block1a[6].portadatain[] = ( data_a[6..6]);
ram_block1a[7].portadatain[] = ( data_a[7..7]);
ram_block1a[7..0].portawe = wren_a;
ram_block1a[7..0].portbaddr[] = ( address_b_wire[10..0]);
ram_block1a[7..0].portbre = B"11111111";
address_a_wire[] = address_a[];
address_b_wire[] = address_b[];
q_b[] = ( ram_block1a[7..0].portbdataout[0..0]);
END;
--VALID FILE