URL
https://opencores.org/ocsvn/z80soc/z80soc/trunk
Subversion Repositories z80soc
[/] [z80soc/] [trunk/] [V0.7.3/] [Software/] [C/] [testsys/] [testsys copy.c] - Rev 46
Compare with Previous | Blame | View Log
#include <de2115.h> #include <z80soc.h> #include <string.h> #include <stdio.h> #include <stdlib.h> #include <time.h> void delay(int count) { if (count > 0) { for (count; count>0; count--) { readMemory(0x0000); } } } // blink leds until pushbutton 0 is pressed void waitToExit(void) { while (pushButton() != 0b00000001) { greenLeds(0xFF); delay(5000); greenLeds(0x00); delay(5000); } } unsigned char testmodule(unsigned int baseAddress, unsigned int endAddress, short int baseAddressL, short int baseAddressH) { unsigned char currdip = dipSwitchA(); unsigned char mychar = 0; while (baseAddress < endAddress) { hexlsb0(baseAddressL); hexmsb0(baseAddressH); mychar = 0x41; hexmsb1(mychar); writeMemory(baseAddress, mychar); mychar = 0xAA; mychar = readMemory(baseAddress); hexlsb1(mychar); if ( mychar == 0x41) { greenLeds(readMemory(baseAddress)); baseAddressL++; baseAddress++; if (baseAddressL > 0xFF) { baseAddressL = 0x00; baseAddressH++; } } else { waitToExit(); return 0xFF; } } waitToExit(); return 0xAA; } unsigned char testvram(void) { unsigned char nchar = 0; unsigned int addr = readMemoryInt(0x57D4); unsigned int endaddr = addr + 4800; hexlsb0(readMemory(0x57D4)); hexmsb0(readMemory(0x57D5)); while (addr < endaddr) { writeMemory(addr,nchar); nchar++; if (nchar == 255) nchar = 0; addr++; } waitToExit(); return 0xAA; } unsigned char testlcd(void) { unsigned char nchar = 0; unsigned int addr = readMemoryInt(0x57DC); hexlsb0(readMemory(0x57DC)); hexmsb0(readMemory(0x57DD)); printlcd(0,"**** Z80SoC ****"); printlcd(16," Retro-CPU.run "); waitToExit(); return 0xAA; } unsigned char lcdcls(void) { unsigned char nchar = 0; unsigned int addr = readMemoryInt(0x57DC); hexlsb0(readMemory(0x57DC)); hexmsb0(readMemory(0x57DD)); while (nchar < 32) { writeMemory(addr,32); nchar++; addr++; } return 0xAA; } unsigned char testCharRam(void) { // will redefine char with ascii codes 1 to 4 unsigned int baseAddress = readMemoryInt(0x57D6) + 8; short int i; unsigned char hero_bits[] = { 0x01,0x01,0x03,0x13,0x13,0x97,0x97,0x9e, 0x80,0x80,0xc0,0xc8,0xc8,0xe9,0xe9,0x79, 0xbc,0xbd,0xff,0xff,0xfb,0xf3,0xe1,0xc1, 0x3d,0xbd,0xff,0xff,0xdf,0xcf,0x87,0x83 }; for (i = 0; i < 32; i++) { writeMemory(baseAddress + i, hero_bits[i]); } writeMemory(readMemoryInt(0x57D4) + 10*80 + 31,1); writeMemory(readMemoryInt(0x57D4) + 10*80 + 32,2); writeMemory(readMemoryInt(0x57D4) + 11*80 + 31,3); writeMemory(readMemoryInt(0x57D4) + 11*80 + 32,4); waitToExit(); return 0xAA; } unsigned char testprintf(char s[]) { // set device output to video writeMemory(0x57CD,0); hexlsb0(readMemory(0x57D0)); hexmsb0(readMemory(0x57D1)); printf(s); return 0xAA; } void main(void) { unsigned char SW = 0; short int LEDCOUNT = 0; short int baseAddressL; short int baseAddressH; unsigned int baseAddress = 0; unsigned int endAddress = 0; unsigned int myvramaddr; int i; int direction; myvramaddr = readMemoryInt(0x57D4) + (5 * 32); writeMemoryInt(0x57D0, myvramaddr); cls(); lcdonoff(1); printlcd(0,"TestSys Z80SoC "); if (readMemory(0x57DF) == 0) { printlcd(16," running on DE1"); } else if (readMemory(0x57DF) == 1) { printlcd(16," running on S3E"); } else if (readMemory(0x57DF) == 2) { printlcd(16," running on DE2"); } while (1) { cursorxy(15,3); printf("TestSys - A hardware test program for the Z80SoC"); redLedsA(LEDCOUNT); LEDCOUNT++; SW = dipSwitchA(); switch (SW) { case 1: // test sram printf("\n\n\n Testing RAM. Check the address being tested on the 7SEG Display"); baseAddressL = readMemory(0x57D8); baseAddressH = readMemory(0x57D9); baseAddress = readMemoryInt(0x57D8); endAddress = readMemoryInt(0x57DA) - 0x100; hexmsb1(testmodule(baseAddress, endAddress, baseAddressL, baseAddressH)); waitToExit(); break; case 2: // test vram //hexmsb1(testvram()); baseAddressL = readMemory(0x57D4); baseAddressH = readMemory(0x57D5); baseAddress = readMemoryInt(0x57D4); endAddress = readMemoryInt(0x57D8); hexmsb1(testmodule(baseAddress, endAddress, baseAddressL, baseAddressH)); waitToExit(); cls(); break; case 4: // test lcd if (readMemory(0x57DF) == 0) { printf("\n\n\n DE1 platform don't have LCD display"); waitToExit(); cls(); } else { printf("\n\n\n Check the LCD display"); lcdonoff(0); waitToExit(); lcdonoff(1); } break; case 8: // test lcd if (readMemory(0x57DF) == 0) { printf("\n\n\n DE1 platform don't have LCD display"); waitToExit(); cls(); } else { printf("\n\n\n Check the LCD display"); hexmsb1(testlcd()); waitToExit(); printlcd(0,"TestSys Z80SoC "); if (readMemory(0x57DF) == 1) { printlcd(16," running on S3E"); } else if (readMemory(0x57DF) == 2) { printlcd(16," running on DE2"); } } break; case 16: // test charram hexlsb0(readMemory(0x57D6)); hexmsb0(readMemory(0x57D7)); hexmsb1(testCharRam()); waitToExit(); cls(); break; case 32: printf("\n\n\n Testing the printf C function and newlines \\n"); cursorxy(10,10); printf("1******************** Z80SoC ********************"); cursorxy(10,11); printf("2******************** Z80SoC ********************"); cursorxy(10,12); printf("3******************** Z80SoC ********************"); printf("<< end>>"); printf("\n>>>printing after\n\n\n\n>>>four new lines\n"); hexlsb0(readMemory(0x57D0)); hexmsb0(readMemory(0x57D1)); printf(" 1\n"); printf(" 2\n"); printf(" 3\n\n"); printf(" 4\n"); waitToExit(); cls(); break; case 64: cls(); cursorxy(5,2); printf("Testing char type storage and retrieve using writeMemory() function\n"); cursorxy(5,3); printf("Confirms that a single byte is being written"); baseAddress = readMemoryInt(0x57D8); for (i=0; i<10; i++) { writeMemory(baseAddress + i, i); writeMemory(baseAddress + 20 + 9 - i, 9 - i); } cursorxy(5,5); printf("written up down"); cursorxy(40,5); printf("written down up"); for (i=0; i<10; i++) { cursorxy(5,6+i); printf("%d",readMemory(baseAddress + i)); cursorxy(40,6+i); printf("%d",readMemory(baseAddress + 20 + i)); } waitToExit(); cls(); break; case 128: // random number generator test printf("\n Testing the random integer number generator implemented inside thr FPGA (0xFFCA)"); cursorxy(5,5); for (i=0; i<2000; i++) { direction = readMemoryInt(0x57C9); // get a rumdom number - integer printf("%i ",direction); } waitToExit(); cls(); break; } } }