OpenCores
URL https://opencores.org/ocsvn/zipcpu/zipcpu/trunk

Subversion Repositories zipcpu

[/] [zipcpu/] [trunk/] [bench/] [asm/] [wdt.S] - Rev 23

Go to most recent revision | Compare with Previous | Blame | View Log

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; Filename:     wdt.S
;
; Project:      Zip CPU -- a small, lightweight, RISC CPU soft core
;
; Purpose:      Test to see whether or not the watchdog timer works.  We'll
;               start the watchdog, clear a register, then write as many times
;               as we can to memory before the watchdog kicks in.
;
; Creator:      Dan Gisselquist, Ph.D.
;               Gisselquist Tecnology, LLC
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; Copyright (C) 2015, Gisselquist Technology, LLC
;
; This program is free software (firmware): you can redistribute it and/or
; modify it under the terms of  the GNU General Public License as published
; by the Free Software Foundation, either version 3 of the License, or (at
; your option) any later version.
;
; This program is distributed in the hope that it will be useful, but WITHOUT
; ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
; FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
; for more details.
;
; License:      GPL, v3, as defined and found on www.gnu.org,
;               http://www.gnu.org/licenses/gpl.html
;
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; Registers:
;       R12     Peripheral base
;       R11     Address of our one memory variable
;
start:
        CLR     R12             ; Get the address of our peripheral base
        LDIHI   $c000h,R12
        MOV     $1+PC,R11       ; Get a memory address for a variable
        BRA     $1
        .DAT    0
        LDI     $-1,R0  ; Start the watchdog timer
        STO     R0,$1(R12)
        LSR     $1,R0
        STO     R0,$4(R12)
        LSR     $1,R0
        STO     R0,$5(R12)
        LSR     $1,R0
        STO     R0,$6(R12)
        ;
        CLR     R0
loop:
        ADD     $1,R0
        LOD     (R11),R1
        CMP     R0,R1
        STO.LT  R0,(R11)
        TST     R0
        BLT     $2
        BRA     $-7

        HALT

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.