Subversion Repositories zipcpu

################################################################################
#
# Filename:     Makefile
#
# Project:      Zip CPU -- a small, lightweight, RISC CPU soft core
#
# Purpose:      This makefile builds the final verilator simulation of the
#               zipsystem.  Specifically, it builds the final C++ portion
#       of the simulator, and thus the final simulator executable.
#
#       This simulator depends upon the ncurses library.
#
#       Useful targets of this makefile include:
#
#       zippy_tb (default)
#               This is the test bench program / simulator that is built by
#               this directory.
#
#       test
#               Runs the simulator on a test program found in the trunk/sw/zasm
#               directory.  That program needs to be built via 'make test' in
#               that directory before this make test will work.  Changes to the
#               test itself will require a 'make test' in trunk/sw/zasm as well
#               as 'make test' in this directory.
#
#               The test itself consists of two tests.  The first, the "step"
#               test, tests whether the test works via "step"ing the CPU.
#               This would be the interface to the CPU were the CPU placed in
#               a device.
#
#               The second test is an internal test which works by just running
#               the CPU without step instructions.
#
#               In either case the test is over upon reaching either a HALT
#               or a BUSY instruction.  A HALT instruction indicates success,
#               BUSY a failure.
#
#       stest
#               Runs the test in "step" mode as described above.
#
#       itest
#               Runs the test file in interactive mode.  The CPU will not 
#               execute any instructions without user interaction.  This is
#               useful for actually debugging the test.  The other two modes
#               are useful for quickly determining that the CPU does (or
#               doesn't) work.
#
#       dhrystone
#               Runs a hand-optimized version of the dhrystone benchmark.  
#               Using the instructions at the top of the dhrystone assembly
#               file, you should be able to convert the result to DMIPS or even
#               DMIPS/MHz.
#
#       div_tb
#               A raw test bench to test the divide unit separate from the
#               rest of the CPU.  This test will fail with a failed assert()
#               if unsuccessful, or complete with no error (but lots of
#               debugging output) if successful.  To actually run this test,
#               you'll need to run ./div_tb (no arguments necessary).
#
#       pdump
#               zippy_tb can be configured to produce a profile output that is
#               very useful when debugging the Dhrystone benchmark.  (It is
#               so configured by default.)  This file will be name pfile.bin.
#               pdump is a very simple program designed to read this file and
#               produce some (very raw) information from it.  To use this,
#               type pdump and the name of the executable file, such as 
#               ../asm/zipdhry.z, and examine how many times each instruction
#               was executed, and how many stalls took place between each
#               instruction and the next.
#
#       clean
#               Removes all products of compilation--specifically zippy_tb,
#               pdump and div_tb.
#
#
# Creator:      Dan Gisselquist, Ph.D.
#               Gisselquist Technology, LLC
#
################################################################################
#
# Copyright (C) 2015, Gisselquist Technology, LLC
#
# This program is free software (firmware): you can redistribute it and/or
# modify it under the terms of  the GNU General Public License as published
# by the Free Software Foundation, either version 3 of the License, or (at
# your option) any later version.
#
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
# for more details.
#
# License:      GPL, v3, as defined and found on www.gnu.org,
#               http://www.gnu.org/licenses/gpl.html
#
#
################################################################################
#
all: zippy_tb pdump div_tb

CXX     := g++
FLAGS   := -Wall -Og -g
ZASM    := ../../sw/zasm
RTLD    := ../../rtl
INCS    := -I$(RTLD)/obj_dir/ -I$(RTLD) -I/usr/share/verilator/include -I$(ZASM)
SOURCES := zippy_tb.cpp memsim.cpp twoc.cpp $(ZASM)/zopcodes.cpp $(ZASM)/zparser.cpp
VLIB    := /usr/share/verilator/include/verilated.cpp
RAWLIB  := $(VLIB) $(RTLD)/obj_dir/Vzipsystem__ALL.a
LIBS    := $(RAWLIB) -lncurses
TESTF   := $(ZASM)/z.out
DHRYSTONEF := ../asm/zipdhry.z

zippy_tb: $(SOURCES) $(RAWLIB) $(ZASM)/zopcodes.h $(ZASM)/zparser.h testb.h
zippy_tb: $(RTLD)/cpudefs.h
        $(CXX) $(FLAGS) $(INCS) $(SOURCES) $(LIBS) -o $@

div_tb: div_tb.cpp twoc.cpp $(VLIB) $(RTLD)/obj_dir/Vdiv__ALL.a testb.h
        $(CXX) $(FLAGS) $(INCS) div_tb.cpp twoc.cpp $(VLIB) $(RTLD)/obj_dir/Vdiv__ALL.a -o $@

pdump: pdump.cpp $(ZASM)/zopcodes.cpp $(ZASM)/zparser.cpp 
pdump: $(ZASM)/zopcodes.h $(ZASM)/zparser.h testb.h twoc.cpp
        $(CXX) $(FLAGS) $(INCS) pdump.cpp $(ZASM)/zopcodes.cpp $(ZASM)/zparser.cpp twoc.cpp -o $@

.PHONY: stest
stest: zippy_tb
        ./zippy_tb -s $(TESTF)

.PHONY: itest
itest: zippy_tb
        ./zippy_tb $(TESTF)

.PHONY: test
test: zippy_tb stest
        ./zippy_tb -a $(TESTF)

.PHONY: dhrystone
dhrystone: zippy_tb
        ./zippy_tb -a $(DHRYSTONEF)

.PHONY: clean
clean:
        rm ./zippy_tb pdump div_tb