Subversion Repositories zipcpu

////////////////////////////////////////////////////////////////////////////////
//
// Filename: 	memsim.h
//
// Project:	Zip CPU -- a small, lightweight, RISC CPU core
//
// Purpose:	This creates a memory like device to act on a WISHBONE bus.
//		It doesn't exercise the bus thoroughly, but does give some
//		exercise to the bus to see whether or not the bus master
//		can control it.
//
//
// Creator:	Dan Gisselquist, Ph.D.
//		Gisselquist Tecnology, LLC
//
////////////////////////////////////////////////////////////////////////////////
//
// Copyright (C) 2015, Gisselquist Technology, LLC
//
// This program is free software (firmware): you can redistribute it and/or
// modify it under the terms of  the GNU General Public License as published
// by the Free Software Foundation, either version 3 of the License, or (at
// your option) any later version.
//
// This program is distributed in the hope that it will be useful, but WITHOUT
// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with this program.  (It's in the $(ROOT)/doc directory, run make with no
// target there if the PDF file isn't present.)  If not, see
// <http://www.gnu.org/licenses/> for a copy.
//
// License:	GPL, v3, as defined and found on www.gnu.org,
//		http://www.gnu.org/licenses/gpl.html
//
//
////////////////////////////////////////////////////////////////////////////////
#ifndef	MEMSIM_H
#define	MEMSIM_H
 
class	MEMSIM {
public:	
	typedef	unsigned int	BUSW;
	typedef	unsigned char	uchar;
 
	BUSW	*m_mem, m_len, m_mask;
 
 
	MEMSIM(const unsigned int nwords);
	~MEMSIM(void);
	void	load(const char *fname);
	void	apply(const uchar wb_cyc, const uchar wb_stb, const uchar wb_we,
			const BUSW wb_addr, const BUSW wb_data, 
			uchar &o_ack, uchar &o_stall, BUSW &o_data);
	void	operator()(const uchar wb_cyc, const uchar wb_stb, const uchar wb_we,
			const BUSW wb_addr, const BUSW wb_data, 
			uchar &o_ack, uchar &o_stall, BUSW &o_data) {
		apply(wb_cyc, wb_stb, wb_we, wb_addr, wb_data, o_ack, o_stall, o_data);
	}
	BUSW &operator[](const BUSW addr) { return m_mem[addr&m_mask]; }
};
 
#endif