OpenCores
URL https://opencores.org/ocsvn/zipcpu/zipcpu/trunk

Subversion Repositories zipcpu

[/] [zipcpu/] [trunk/] [sw/] [lib/] [mpy32s.S] - Rev 65

Go to most recent revision | Compare with Previous | Blame | View Log

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; Filename:     mpy32s.S
;
; Project:      Zip CPU -- a small, lightweight, RISC CPU soft core
;
; Purpose:      Zip assembly file for running a 32-bit by 32-bit signed
;               multiply.  It works by adjusting the sign of the 32x32-bit
;               unsigned multiply.
;
; Creator:      Dan Gisselquist, Ph.D.
;               Gisselquist Tecnology, LLC
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; Copyright (C) 2015, Gisselquist Technology, LLC
;
; This program is free software (firmware): you can redistribute it and/or
; modify it under the terms of  the GNU General Public License as published
; by the Free Software Foundation, either version 3 of the License, or (at
; your option) any later version.
;
; This program is distributed in the hope that it will be useful, but WITHOUT
; ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
; FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
; for more details.
;
; License:      GPL, v3, as defined and found on www.gnu.org,
;               http://www.gnu.org/licenses/gpl.html
;
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
;
;
; We could build mul32s (32-bit signed multiply) as 
;
;       R0 - incoming value to be multiplied
;       R1 - Second multiplicand
;       R2 - Comes in as scratch
;       R3 - used as scratch internally
mpy32s:
        ADD     2,SP
        STO     R3,2(SP)
        ;
        CLR     R3              ; Keep track of resulting sign in R2
        TST     R0              ; Is R0 negative?
        XOR.LT  #1,R3           ; If so, resulting sign will be negative, and
        NEG.NZ  R0              ; then we negate R0 (R0 = ABS(R0))
        TST     R1              ; Is R1 negative?
        XOR.LT  #1,R3           ; If so, result will be opposite sign of before
        NEG.LT  R1              ; Now we get R1=ABS(R1)

        ; JSR mpy32u    
        MOV     __HERE__+2,R2   ; Do our unsigned multiply
        STO     R2,1(SP)
        BRA     mpy32u
        ;
        TST     0,R3            ; Check resulting sign
        BZ      ret_mul32s      ; If positive, do nothing more
        NOT     R0              ; If negative, negate the result
        NOT     R1
        ADD     $1,R1
        ADD.C   $1,R0
ret_mul32s:
        LOD     2(SP),R3
        LOD     3(SP),R2
        ADD     2,SP
        JMP     R2

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.