OpenCores
URL https://opencores.org/ocsvn/System09/System09/trunk

Subversion Repositories System09

[/] [System09/] [trunk/] [rtl/] [Testbench/] [ACIA_tb.vhd] - Rev 120

Go to most recent revision | Compare with Previous | Blame | View Log

--===========================================================================--
--
-- ACIA 6850 Test Bench
--
--
-- John Kent 6th February 2007
--
--
-------------------------------------------------------------------------------
library ieee;
   use ieee.std_logic_1164.all;
   use IEEE.STD_LOGIC_ARITH.ALL;
   use IEEE.STD_LOGIC_UNSIGNED.ALL;
   use ieee.numeric_std.all;
 
entity ACIA_6850_testbench is
end ACIA_6850_testbench;
 
-------------------------------------------------------------------------------
-- Architecture for ACIA 6850 Unit
-------------------------------------------------------------------------------
architecture behavior of ACIA_6850_testbench is
  -----------------------------------------------------------------------------
  -- Signals
  -----------------------------------------------------------------------------
  -- CPU Interface signals
  signal SysClk       : Std_Logic;
  signal uart_reset   : Std_Logic;
  signal uart_cs      : Std_Logic;
  signal uart_rw      : Std_Logic;
  signal uart_addr    : Std_Logic;
  signal uart_data_in : Std_Logic_Vector(7 downto 0);
  signal uart_data_out: Std_Logic_Vector(7 downto 0);
  signal uart_irq     : Std_Logic;
  signal rxclk        : Std_Logic;
  signal txclk        : Std_Logic;
  signal rxbit        : Std_Logic;
  signal txbit        : Std_Logic;
  signal dcd_n        : Std_Logic;
  signal cts_n        : Std_Logic;
  signal rts_n        : Std_Logic;
 
-----------------------------------------------------------------
--
-- ACIA 6850 UART
--
-----------------------------------------------------------------
component ACIA_6850
  port (
     --
	  -- CPU signals
	  --
     clk      : in  Std_Logic;  -- System Clock
     rst      : in  Std_Logic;  -- Reset input (active high)
     cs       : in  Std_Logic;  -- miniUART Chip Select
     rw       : in  Std_Logic;  -- Read / Not Write
     irq      : out Std_Logic;  -- Interrupt
     Addr     : in  Std_Logic;  -- Register Select
     DataIn   : in  Std_Logic_Vector(7 downto 0); -- Data Bus In 
     DataOut  : out Std_Logic_Vector(7 downto 0); -- Data Bus Out
     --
	  -- Uart Signals
	  --
     RxC      : in  Std_Logic;  -- Receive Baud Clock
     TxC      : in  Std_Logic;  -- Transmit Baud Clock
     RxD      : in  Std_Logic;  -- Receive Data
     TxD      : out Std_Logic;  -- Transmit Data
	  DCD_n    : in  Std_Logic;  -- Data Carrier Detect
     CTS_n    : in  Std_Logic;  -- Clear To Send
     RTS_n    : out Std_Logic );  -- Request To send
end component; --================== End of entity ==============================--
 
begin
 
  -----------------------------------------------------------------------------
  -- Instantiation of internal components
  -----------------------------------------------------------------------------
 
my_acia  : ACIA_6850 port map (
    clk       => SysClk,
	 rst       => uart_reset,
    cs        => uart_cs,
	 rw        => uart_rw,
    Irq       => uart_irq,
    Addr      => uart_addr,
	 Datain    => uart_data_in,
	 DataOut   => uart_data_out,
	 RxC       => rxclk,
	 TxC       => txclk,
	 RxD       => rxbit,
	 TxD       => txbit,
	 DCD_n     => dcd_n,
	 CTS_n     => cts_n,
	 RTS_n     => rts_n
	 );
 
 
  -- *** Test Bench - User Defined Section ***
   tb : PROCESS
	variable count : integer;
   BEGIN
 
   cts_n <= '0';
	dcd_n <= '0';
 
		for count in 0 to 4096 loop
		   if (count mod 16) = 0 then
		     rxclk <= '1';
			  txclk <= '1'; 
		   elsif (count mod 16) = 8 then
		     rxclk <= '0';
			  txclk <= '0'; 
         end if;
 
			case count is
			when 0 =>
				uart_reset <= '1';
 		      uart_cs <= '0';
				uart_rw <= '1';
				uart_addr <= '0';
				uart_data_in <= "00000000";
				rxbit <= '1';
			when 1 =>
				uart_reset <= '0';
			when 3 =>
 		      uart_cs <= '1';
				uart_rw <= '0'; -- write control
				uart_addr <= '0';
				uart_data_in <= "00010001";
			when 4 =>
 		      uart_cs <= '0';
				uart_rw <= '1';
				uart_addr <= '0';
				uart_data_in <= "00000000";
			when 5 =>
 		      uart_cs <= '1';
				uart_rw <= '0'; -- write data
				uart_addr <= '1';
				uart_data_in <= "01010101";
			when 6 =>
 		      uart_cs <= '0';
				uart_rw <= '1';
				uart_addr <= '1';
				uart_data_in <= "00000000";
			when 256 =>
            rxbit <= '0'; -- start
			when 512 =>
			   rxbit <= '1'; -- bit 0
			when 768 =>
            rxbit <= '0'; -- bit 1
			when 1024 =>
			   rxbit <= '1'; -- bit 2
			when 1280 =>
            rxbit <= '1'; -- bit3
			when 1536 =>
			   rxbit <= '0'; -- bit 4
			when 1792 =>
            rxbit <= '0'; -- bit 5
			when 2048 =>
			   rxbit <= '1'; -- bit 6
			when 2304 =>
            rxbit <= '0'; -- bit 7
			when 2560 =>
			   rxbit <= '1'; -- stop 1
			when 2816 =>
			   rxbit <= '1'; -- stop 2
			when 3100 =>
 		      uart_cs <= '1';
				uart_rw <= '1'; -- read control
				uart_addr <= '0';
			when 3101 =>
 		      uart_cs <= '0';
				uart_rw <= '1';
				uart_addr <= '0';
			when 3102 =>
 		      uart_cs <= '1';
				uart_rw <= '1'; -- read data
				uart_addr <= '1';
			when 3103 =>
 		      uart_cs <= '0';
				uart_rw <= '1';
				uart_addr <= '1';
			when others =>
			   null;
			end case;
			SysClk <= '1';
			wait for 40 ns;
			SysClk <= '0';
			wait for 40 ns;
		end loop;
 
      wait; -- will wait forever
   END PROCESS;
-- *** End Test Bench - User Defined Section ***
 
end behavior; --===================== End of architecture =======================--
 
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.