OpenCores
URL https://opencores.org/ocsvn/System09/System09/trunk

Subversion Repositories System09

[/] [System09/] [trunk/] [rtl/] [VHDL/] [pia6821.vhd] - Rev 197

Go to most recent revision | Compare with Previous | Blame | View Log

--===========================================================================--
--                                                                           --
--        Synthesizable 6821 Compatible Parallel Interface Adapter           --
--                                                                           --
--===========================================================================--
--
--  File name      : pia6821.vhd
--
--  Entity name    : pia6821
--
--  Purpose        : Implements a 6821 like PIA with
--                   2 x 8 bit parallel I/O ports with
--                   programmable data direction registers and
--                   2 x 2 bit control signals.
--                  
--  Dependencies   : ieee.std_logic_1164
--                   ieee.std_logic_unsigned
--                   unisim.vcomponents
--
--  Author         : John E. Kent
--
--  Email          : dilbert57@opencores.org      
--
--  Web            : http://opencores.org/project,system09
--
--  Description    : Register Memory Map
--
--                   Base + $00 - Port A Data & Direction register
--                   Base + $01 - Port A Control register
--                   Base + $02 - Port B Data & Direction Direction Register
--                   Base + $03 - Port B Control Register
--
--  Copyright (C) 2004 - 2010 John Kent
--
--  This program is free software: you can redistribute it and/or modify
--  it under the terms of the GNU General Public License as published by
--  the Free Software Foundation, either version 3 of the License, or
--  (at your option) any later version.
--
--  This program is distributed in the hope that it will be useful,
--  but WITHOUT ANY WARRANTY; without even the implied warranty of
--  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
--  GNU General Public License for more details.
--
--  You should have received a copy of the GNU General Public License
--  along with this program.  If not, see <http://www.gnu.org/licenses/>.
--
--===========================================================================--
--                                                                           --
--                              Revision  History                            --
--                                                                           --
--===========================================================================--
--
-- Version  Author     Date          Description
-- 0.0      John Kent  2004-05-01    Initial version developed from ioport.vhd
-- 0.1      John Kent  2010-05-30    Updated header & GPL information
-- 0.2      John Kent  2010-08-09    Made reset synchronous for wishbone compliance          
--
--===========================================================================--
 
library ieee;
   use ieee.std_logic_1164.all;
   use ieee.std_logic_unsigned.all;
--library unisim;
--   use unisim.vcomponents.all;
 
entity pia6821 is
  port (	
    clk       : in    std_logic;
    rst       : in    std_logic;
    cs        : in    std_logic;
    rw        : in    std_logic;
    addr      : in    std_logic_vector(1 downto 0);
    data_in   : in    std_logic_vector(7 downto 0);
    data_out  : out   std_logic_vector(7 downto 0);
    irqa      : out   std_logic;
    irqb      : out   std_logic;
    pa        : inout std_logic_vector(7 downto 0);
    ca1       : in    std_logic;
    ca2       : inout std_logic;
    pb        : inout std_logic_vector(7 downto 0);
    cb1       : in    std_logic;
    cb2       : inout std_logic
  );
end;
 
architecture pia_arch of pia6821 is
 
signal porta_ddr   : std_logic_vector(7 downto 0);
signal porta_data  : std_logic_vector(7 downto 0);
signal porta_ctrl  : std_logic_vector(5 downto 0);
signal porta_read  : std_logic;
 
signal portb_ddr   : std_logic_vector(7 downto 0);
signal portb_data  : std_logic_vector(7 downto 0);
signal portb_ctrl  : std_logic_vector(5 downto 0);
signal portb_read  : std_logic;
signal portb_write : std_logic;
 
signal ca1_del     : std_logic;
signal ca1_rise    : std_logic;
signal ca1_fall    : std_logic;
signal ca1_edge    : std_logic;
signal irqa1       : std_logic;
 
signal ca2_del     : std_logic;
signal ca2_rise    : std_logic;
signal ca2_fall    : std_logic;
signal ca2_edge    : std_logic;
signal irqa2       : std_logic;
signal ca2_out     : std_logic;
 
signal cb1_del     : std_logic;
signal cb1_rise    : std_logic;
signal cb1_fall    : std_logic;
signal cb1_edge    : std_logic;
signal irqb1       : std_logic;
 
signal cb2_del     : std_logic;
signal cb2_rise    : std_logic;
signal cb2_fall    : std_logic;
signal cb2_edge    : std_logic;
signal irqb2       : std_logic;
signal cb2_out     : std_logic;
 
begin
 
--------------------------------
--
-- read I/O port
--
--------------------------------
 
pia_read : process(  addr,	cs,
                     irqa1, irqa2, irqb1, irqb2,
                     porta_ddr,  portb_ddr,
                     porta_data, portb_data,
                     porta_ctrl, portb_ctrl,
                     pa,         pb )
variable count : integer;
begin
  case addr is
  when "00" =>
    for count in 0 to 7 loop
      if porta_ctrl(2) = '0' then
        data_out(count) <= porta_ddr(count);
        porta_read <= '0';
      else
        if porta_ddr(count) = '1' then
          data_out(count) <= porta_data(count);
        else
          data_out(count) <= pa(count);
        end if;
        porta_read <= cs;
      end if;
    end loop;
    portb_read <= '0';
 
  when "01" =>
    data_out <= irqa1 & irqa2 & porta_ctrl;
    porta_read <= '0';
    portb_read <= '0';
 
  when "10" =>
    for count in 0 to 7 loop
      if portb_ctrl(2) = '0' then
        data_out(count) <= portb_ddr(count);
        portb_read <= '0';
      else
        if portb_ddr(count) = '1' then
          data_out(count) <= portb_data(count);
        else
          data_out(count) <= pb(count);
        end if;
        portb_read <= cs;
      end if;
    end loop;
    porta_read <= '0';
 
  when "11" =>
    data_out <= irqb1 & irqb2 & portb_ctrl;
    porta_read <= '0';
    portb_read <= '0';
 
  when others =>
    data_out <= "00000000";
    porta_read <= '0';
    portb_read <= '0';
 
  end case;
 
end process;
 
---------------------------------
--
-- Write I/O ports
--
---------------------------------
 
pia_write : process( clk, rst, addr, cs, rw, data_in,
                     porta_ctrl, portb_ctrl,
                     porta_data, portb_data,
                     porta_ctrl, portb_ctrl,
                     porta_ddr, portb_ddr )
begin
  if clk'event and clk = '1' then
    portb_write <= '0';
    if rst = '1' then
      porta_ddr   <= (others=>'0');
      porta_data  <= (others=>'0');
      porta_ctrl  <= (others=>'0');
      portb_ddr   <= (others=>'0');
      portb_data  <= (others=>'0');
      portb_ctrl  <= (others=>'0');
    elsif cs = '1' and rw = '0' then
      case addr is
	when "00" =>
        if porta_ctrl(2) = '0' then
          porta_ddr  <= data_in;
        else
          porta_data <= data_in;
        end if;
      when "01" =>
        porta_ctrl  <= data_in(5 downto 0);
      when "10" =>
        if portb_ctrl(2) = '0' then
          portb_ddr   <= data_in;
        else
          portb_data  <= data_in;
          portb_write <= '1';
        end if;
      when "11" =>
        portb_ctrl  <= data_in(5 downto 0);
      when others =>
        null;
      end case;
    end if;
  end if;
end process;
 
---------------------------------
--
-- direction control port a
--
---------------------------------
porta_direction : process ( porta_data, porta_ddr )
variable count : integer;
begin
  for count in 0 to 7 loop
    if porta_ddr(count) = '1' then
      pa(count) <= porta_data(count);
    else
      pa(count) <= 'Z';
    end if;
  end loop;
end process;
 
---------------------------------
--
-- CA1 Edge detect
--
---------------------------------
ca1_input : process( clk, rst, ca1, ca1_del,
                     ca1_rise, ca1_fall, ca1_edge,
                     irqa1, porta_ctrl, porta_read )
begin
  if clk'event and clk = '0' then
    if rst = '1' then
      ca1_del  <= '0';
      ca1_rise <= '0';
      ca1_fall <= '0';
      irqa1    <= '0';
    else
      ca1_del  <= ca1;
      ca1_rise <= (not ca1_del) and ca1;
      ca1_fall <= ca1_del and (not ca1);
      if ca1_edge = '1' then
        irqa1 <= '1';
      elsif porta_read = '1' then
        irqa1 <= '0';
      end if;
    end if;  
  end if;
 
  if porta_ctrl(1) = '0' then
    ca1_edge <= ca1_fall;
  else
    ca1_edge <= ca1_rise;
  end if;
 
end process;
 
---------------------------------
--
-- CA2 Edge detect
--
---------------------------------
ca2_input : process( clk, rst, ca2, ca2_del,
                     ca2_rise, ca2_fall, ca2_edge,
                     irqa2, porta_ctrl, porta_read )
begin
  if clk'event and clk = '0' then
    if rst = '1' then
      ca2_del  <= '0';
      ca2_rise <= '0';
      ca2_fall <= '0';
      irqa2    <= '0';
    else
      ca2_del  <= ca2;
      ca2_rise <= (not ca2_del) and ca2;
      ca2_fall <= ca2_del and (not ca2);
      if porta_ctrl(5) = '0' and ca2_edge = '1' then
        irqa2 <= '1';
      elsif porta_read = '1' then
        irqa2 <= '0';
      else
        irqa2 <= irqa2;
      end if;
    end if;
  end if;  
 
  if porta_ctrl(4) = '0' then
    ca2_edge <= ca2_fall;
  else
    ca2_edge <= ca2_rise;
  end if;
end process;
 
---------------------------------
--
-- CA2 output control
--
---------------------------------
ca2_output : process( clk, rst, porta_ctrl, porta_read, ca1_edge, ca2_out )
begin
  if clk'event and clk='0' then
    if rst='1' then
      ca2_out <= '0';
    else
      case porta_ctrl(5 downto 3) is
      when "100" => -- read PA clears, CA1 edge sets
        if porta_read = '1' then
          ca2_out <= '0';
        elsif ca1_edge = '1' then
          ca2_out <= '1';
        else
          ca2_out <= ca2_out;
        end if;
      when "101" => -- read PA clears, E sets
        ca2_out <= not porta_read;
      when "110" =>	-- set low
        ca2_out <= '0';
      when "111" =>	-- set high
        ca2_out <= '1';
      when others => -- no change
        ca2_out <= ca2_out;
      end case;
    end if;
  end if;
end process;
 
---------------------------------
--
-- CA2 direction control
--
---------------------------------
ca2_direction : process( porta_ctrl, ca2, ca2_out )
begin
  if porta_ctrl(5) = '0' then
    ca2 <= 'Z';
  else
    ca2 <= ca2_out;
  end if;
end process;
 
---------------------------------
--
-- direction control port b
--
---------------------------------
portb_direction : process ( portb_data, portb_ddr )
variable count : integer;
begin
  for count in 0 to 7 loop
    if portb_ddr(count) = '1' then
      pb(count) <= portb_data(count);
    else
      pb(count) <= 'Z';
    end if;
  end loop;
end process;
 
---------------------------------
--
-- CB1 Edge detect
--
---------------------------------
cb1_input : process( clk, rst, cb1, cb1_del,
                     cb1_rise, cb1_fall, cb1_edge,
                     irqb1, portb_ctrl, portb_read )
begin
  if clk'event and clk = '0' then
    if rst = '1' then
      cb1_del  <= '0';
      cb1_rise <= '0';
      cb1_fall <= '0';
      irqb1    <= '0';
    else
      cb1_del  <= cb1;
      cb1_rise <= (not cb1_del) and cb1;
      cb1_fall <= cb1_del and (not cb1);
 
      if cb1_edge = '1' then
        irqb1 <= '1';
      elsif portb_read = '1' then
        irqb1 <= '0';
      end if;
 
    end if;
  end if;
 
  if portb_ctrl(1) = '0' then
    cb1_edge <= cb1_fall;
  else
    cb1_edge <= cb1_rise;
  end if;
 
end process;
 
---------------------------------
--
-- CB2 Edge detect
--
---------------------------------
cb2_input : process( clk, rst, cb2, cb2_del,
                     cb2_rise, cb2_fall, cb2_edge,
                     irqb2, portb_ctrl, portb_read )
begin
  if clk'event and clk = '0' then
    if rst = '1' then
      cb2_del  <= '0';
      cb2_rise <= '0';
      cb2_fall <= '0';
      irqb2    <= '0';
    else 
      cb2_del  <= cb2;
      cb2_rise <= (not cb2_del) and cb2;
      cb2_fall <= cb2_del and (not cb2);
 
      if portb_ctrl(5) = '0' and cb2_edge = '1' then
        irqb2 <= '1';
      elsif portb_read = '1' then
        irqb2 <= '0';
      end if;
 
    end if;
  end if;
 
  if portb_ctrl(4) = '0' then
    cb2_edge <= cb2_fall;
  else
    cb2_edge <= cb2_rise;
  end if;
end process;
 
---------------------------------
--
-- CB2 output control
--
---------------------------------
cb2_output : process( clk, rst, portb_ctrl, portb_write, cb1_edge, cb2_out )
begin
  if clk'event and clk='0' then
    if rst='1' then
      cb2_out <= '0';
    else
      case portb_ctrl(5 downto 3) is
      when "100" => -- write PB clears, CA1 edge sets
        if portb_write = '1' then
          cb2_out <= '0';
        elsif cb1_edge = '1' then
          cb2_out <= '1';
        end if;
      when "101" => -- write PB clears, E sets
        cb2_out <= not portb_write;
      when "110" =>	-- set low
        cb2_out <= '0';
      when "111" =>	-- set high
        cb2_out <= '1';
      when others => -- no change
        null;
      end case;
    end if;
  end if;
end process;
 
---------------------------------
--
-- CB2 direction control
--
---------------------------------
cb2_direction : process( portb_ctrl, cb2, cb2_out )
begin
  if portb_ctrl(5) = '0' then
    cb2 <= 'Z';
  else
    cb2 <= cb2_out;
  end if;
end process;
 
---------------------------------
--
-- IRQ control
--
---------------------------------
pia_irq : process( irqa1, irqa2, irqb1, irqb2, porta_ctrl, portb_ctrl )
begin
  irqa <= (irqa1 and porta_ctrl(0)) or (irqa2 and porta_ctrl(3));
  irqb <= (irqb1 and portb_ctrl(0)) or (irqb2 and portb_ctrl(3));
end process;
 
end pia_arch;
 
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.