Subversion Repositories a-z80

-- ZX Spectrum for Altera DE1
--
-- Copyright (c) 2009-2010 Mike Stirling
--
-- All rights reserved
--
-- Redistribution and use in source and synthezised forms, with or without
-- modification, are permitted provided that the following conditions are met:
--
-- * Redistributions of source code must retain the above copyright notice,
--   this list of conditions and the following disclaimer.
--
-- * Redistributions in synthesized form must reproduce the above copyright
--   notice, this list of conditions and the following disclaimer in the
--   documentation and/or other materials provided with the distribution.
--
-- * Neither the name of the author nor the names of other contributors may
--   be used to endorse or promote products derived from this software without
--   specific prior written permission.
--
-- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-- THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-- PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
-- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-- POSSIBILITY OF SUCH DAMAGE.
--
 
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.STD_LOGIC_ARITH.ALL;
use IEEE.STD_LOGIC_UNSIGNED.ALL;
 
entity i2s_intf is
generic(
    mclk_rate : positive := 12000000;
    sample_rate : positive := 8000;
    preamble : positive := 1; -- I2S
    word_length : positive := 16
    );
 
port (
    -- 2x MCLK in (e.g. 24 MHz for WM8731 USB mode)
    CLK         :   in  std_logic;
    nRESET      :   in  std_logic;
 
    -- Parallel IO
    PCM_INL     :   out std_logic_vector(word_length - 1 downto 0);
    PCM_INR     :   out std_logic_vector(word_length - 1 downto 0);
    PCM_OUTL    :   in  std_logic_vector(word_length - 1 downto 0);
    PCM_OUTR    :   in  std_logic_vector(word_length - 1 downto 0);
 
    -- Codec interface (right justified mode)
    -- MCLK is generated at half of the CLK input
    I2S_MCLK    :   out std_logic;
    -- LRCLK is equal to the sample rate and is synchronous to
    -- MCLK.  It must be related to MCLK by the oversampling ratio
    -- given in the codec datasheet.
    I2S_LRCLK   :   out std_logic;
 
    -- Data is shifted out on the falling edge of BCLK, sampled
    -- on the rising edge.  The bit rate is determined such that
    -- it is fast enough to fit preamble + word_length bits into
    -- each LRCLK half cycle.  The last cycle of each word may be
    -- stretched to fit to LRCLK.  This is OK at least for the
    -- WM8731 codec.
    -- The first falling edge of each timeslot is always synchronised
    -- with the LRCLK edge.
    I2S_BCLK    :   out std_logic;
    -- Output bitstream
    I2S_DOUT    :   out std_logic;
    -- Input bitstream
    I2S_DIN     :   in  std_logic
    );
end i2s_intf;
 
architecture i2s_intf_arch of i2s_intf is
constant ratio_mclk_fs : positive := (mclk_rate / sample_rate);
constant lrdivider_top : positive := (ratio_mclk_fs / 2) - 1;
constant bdivider_top : positive := (ratio_mclk_fs / 8 / (preamble + word_length) * 2) - 1;
constant nbits : positive := preamble + word_length;
 
subtype lrdivider_t is integer range 0 to lrdivider_top;
subtype bdivider_t is integer range 0 to bdivider_top;
subtype bitcount_t is integer range 0 to nbits;
 
signal lrdivider : lrdivider_t;
signal bdivider : bdivider_t;
signal bitcount : bitcount_t;
 
signal mclk_r : std_logic;
signal lrclk_r : std_logic;
signal bclk_r : std_logic;
 
-- Shift register is long enough for the number of data bits
-- plus the preamble, plus an extra bit on the right to register
-- the incoming data
signal shiftreg : std_logic_vector(nbits downto 0);
begin
    I2S_MCLK <= mclk_r;
    I2S_LRCLK <= lrclk_r;
    I2S_BCLK <= bclk_r;
    I2S_DOUT <= shiftreg(nbits); -- data goes out MSb first
 
    process(nRESET,CLK)
    begin
        if nRESET = '0' then
            PCM_INL <= (others => '0');
            PCM_INR <= (others => '0');
 
            -- Preload down-counters for clock generation
            lrdivider <= lrdivider_top;
            bdivider <= bdivider_top;
            bitcount <= nbits;
 
            mclk_r <= '0';
            lrclk_r <= '0';
            bclk_r <= '0';
            shiftreg <= (others => '0');
        elsif rising_edge(CLK) then
            -- Generate MCLK at half input clock rate
            mclk_r <= not mclk_r;
 
            -- Generate LRCLK at rate specified by codec configuration
            if lrdivider = 0 then
                -- LRCLK divider has reached 0 - start again from the top
                lrdivider <= lrdivider_top;
 
                -- Generate LRCLK edge and sync the BCLK counter
                lrclk_r <= not lrclk_r;
                bclk_r <= '0';
                bitcount <= nbits; -- 1 extra required for setup
                bdivider <= bdivider_top;
 
                -- Load shift register with output data padding preamble
                -- with 0s.  Load output buses with input word from the
                -- previous timeslot.
                shiftreg(nbits downto nbits - preamble + 1) <= (others => '0');
                if lrclk_r = '0' then
                    -- Previous channel input is LEFT.  This is available in the
                    -- shift register at the end of a cycle, right justified
                    PCM_INL <= shiftreg(word_length - 1 downto 0);
                    -- Next channel to output is RIGHT.  Load this into the
                    -- shift register at the start of a cycle, left justified
                    shiftreg(word_length downto 1) <= PCM_OUTR;
                else
                    -- Previous channel input is RIGHT
                    PCM_INR <= shiftreg(word_length - 1 downto 0);
                    -- Next channel is LEFT
                    shiftreg(word_length downto 1) <= PCM_OUTL;
                end if;
            else
                -- Decrement the LRCLK counter
                lrdivider <= lrdivider - 1;
 
                -- Generate BCLK at a suitable rate to fit the required number
                -- of bits into each timeslot.  Data is changed on the falling edge,
                -- sampled on the rising edge
                if bdivider = 0 then
                    -- If all bits have been output for this phase then
                    -- stop and wait to sync back up with LRCLK
                    if bitcount > 0 then
                        -- Reset
                        bdivider <= bdivider_top;
 
                        -- Toggle BCLK
                        bclk_r <= not bclk_r;
                        if bclk_r = '0' then
                            -- Rising edge - shift in current bit and decrement bit counter
                            bitcount <= bitcount - 1;
                            shiftreg(0) <= I2S_DIN;
                        else
                            -- Falling edge - shift out next bit
                            shiftreg(nbits downto 1) <= shiftreg(nbits - 1 downto 0);
                        end if;
                    end if;
                else
                    -- Decrement the BCLK counter
                    bdivider <= bdivider - 1;
                end if;
            end if;
 
        end if;
    end process;
end i2s_intf_arch;