Subversion Repositories a-z80

//============================================================================
// The implementation of the Sinclair ZX Spectrum ULA
//
//  Copyright (C) 2014-2016  Goran Devic
//
//  This program is free software; you can redistribute it and/or modify it
//  under the terms of the GNU General Public License as published by the Free
//  Software Foundation; either version 2 of the License, or (at your option)
//  any later version.
//
//  This program is distributed in the hope that it will be useful, but WITHOUT
//  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
//  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
//  more details.
//
//  You should have received a copy of the GNU General Public License along
//  with this program; if not, write to the Free Software Foundation, Inc.,
//  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
//============================================================================
module ula
(
    //-------- Clocks and reset -----------------
    input wire CLOCK_27,            // Input clock 27 MHz
    input wire CLOCK_24,            // Input clock 24 MHz
    input wire turbo,               // Turbo speed (3.5 MHz x 2 = 7.0 MHz)
    output wire clk_vram,
    input wire reset,               // KEY0 is reset
    output wire locked,             // PLL is locked signal

    //-------- CPU control ----------------------
    output wire clk_cpu,            // Generates CPU clock of 3.5 MHz
    output wire vs_nintr,           // Generates a vertical retrace interrupt

    //-------- Address and data buses -----------
    input wire [15:0] A,            // Input address bus
    input wire [7:0] D,             // Input data bus
    output wire [7:0] ula_data,     // Output data
    input wire io_we,               // Write enable to data register through IO

    output wire [12:0] vram_address,// ULA video block requests a byte from the video RAM
    input wire [7:0] vram_data,     // ULA video block reads a byte from the video RAM

    //-------- PS/2 Keyboard --------------------
    input wire PS2_CLK,
    input wire PS2_DAT,
    output wire pressed,

    //-------- Audio (Tape player) --------------
    inout wire I2C_SCLK,
    inout wire I2C_SDAT,
    output wire AUD_XCK,
    output wire AUD_ADCLRCK,
    output wire AUD_DACLRCK,
    output wire AUD_BCLK,
    output wire AUD_DACDAT,
    input wire AUD_ADCDAT,
    output reg beeper,

    //-------- VGA connector --------------------
    output wire [3:0] VGA_R,
    output wire [3:0] VGA_G,
    output wire [3:0] VGA_B,
    output reg VGA_HS,
    output reg VGA_VS
);
`default_nettype none

//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// Instantiate PLL and clocks block
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
wire clk_pix;                       // VGA pixel clock (25.175 MHz)
wire clk_ula;                       // ULA master clock (14 MHz)
assign clk_vram = clk_pix;
pll pll_( .locked(locked), .inclk0(CLOCK_27), .c0(clk_pix), .c1(clk_ula) );

clocks clocks_( .* );

//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// The border color index
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
reg [2:0] border;                   // Border color index value

always @(posedge clk_cpu)
begin
    if (A[0]==0 && io_we==1) begin
        border <= D[2:0];
        // EAR output (produces a louder sound)
        pcm_outl[14] <= D[4];       // Why [14] and not [15]? Less loud.
        pcm_outr[14] <= D[4];
        // MIC (echoes the input)
        pcm_outl[13] <= D[3];
        pcm_outr[13] <= D[3];
        // Let us hear the tape loading!
        pcm_outl[12] <= pcm_inl[14] | pcm_inr[14];
        pcm_outr[12] <= pcm_inl[14] | pcm_inr[14];
        // Let us see the tape loading!
        beep <= (pcm_inl[14] | pcm_inr[14]) ^ D[4] ^ D[3];
    end
end

//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// Instantiate audio interface
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
wire audio_done;
wire audio_error;

i2c_loader i2c_loader_( .CLK(CLOCK_24), .nRESET(reset), .I2C_SCL(I2C_SCLK), .I2C_SDA(I2C_SDAT), .IS_DONE(audio_done), .IS_ERROR(audio_error) );

assign AUD_DACLRCK = AUD_ADCLRCK;
wire [15:0] pcm_inl;
wire [15:0] pcm_inr;
reg  [15:0] pcm_outl;
reg  [15:0] pcm_outr;

i2s_intf i2s_intf_( .CLK(CLOCK_24), .nRESET(reset),
    .PCM_INL(pcm_inl[15:0]), .PCM_INR(pcm_inr[15:0]), .PCM_OUTL(pcm_outl[15:0]), .PCM_OUTR(pcm_outr[15:0]),
    .I2S_MCLK(AUD_XCK), .I2S_LRCLK(AUD_ADCLRCK), .I2S_BCLK(AUD_BCLK), .I2S_DOUT(AUD_DACDAT), .I2S_DIN(AUD_ADCDAT) );

// Show the beeper visually by dividing the frequency with some factor to generate blinks
reg beep;                           // Beeper latch
reg [6:0] beepcnt;                  // Beeper counter
always @(posedge beep)
begin
    beepcnt <= beepcnt - '1;
    if (beepcnt==0) beeper <= ~beeper;
end

//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// Instantiate ULA's video subsystem
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
video video_( .* );

//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// Instantiate keyboard support
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
wire [7:0] scan_code;
wire scan_code_ready;
wire scan_code_error;

ps2_keyboard ps2_keyboard_( .*, .clk(clk_cpu) );

wire [4:0] key_row;
zx_keyboard zx_keyboard_( .*, .clk(clk_cpu) );

always @(*) // always_comb
begin
    ula_data = 8'hFF;
    // Regular IO at every odd address: line-in and keyboard
    if (A[0]==0) begin
        ula_data = { 1'b0, pcm_inl[14] | pcm_inr[14], 1'b0, key_row[4:0] };
    end
end

endmodule