Subversion Repositories an-fpga-implementation-of-low-latency-noc-based-mpsoc

#!/bin/bash
 
#remove address from make_project.tcl & program_board.tcl  
#fix jtag_intfc.sh ~/mpsoc/jtag_xilinx_xsct/jtag_xilinx_xsct
 
source "my_password.sh"
 
remote_folder="mor1k_test"
#source_path="$PRONOC_WORK/MPSOC/kc07_mesh6"
source_path="$PRONOC_WORK/SOC/mor1k_test"
ProNoC_HOME="../../.."
 
echo "$PRONOC_WORK"
 
 
function check_fpga_exist_on_server {
   xsct
   connect 
   jtag targets
}
 
 
 
my_array=("$source_path/src_verilog "
	"$source_path/sw "
	"$source_path/Vivado")
 
 
 
 
 
function copy_sources_all {
	sshpass -p $my_passwd ssh $my_server mkdir -p  "~/mpsoc/$remote_folder"
	echo "copy $source_all on server"  
	#sshpass -p $my_passwd scp -r $source_all   "$my_server:mpsoc/"
	for i in "${my_array[@]}"; do
 		echo "copy $i on server"
		sshpass -p $my_passwd scp -r $i  "$my_server:mpsoc/$remote_folder/"		
 	done
	copy_uart_terminal
}
 
 
function copy_sources_sw {
	echo "copy $source_path/sw on server"  
	sshpass -p $my_passwd scp -r "$source_path/sw"   "$my_server:mpsoc/$remote_folder/"
}
 
function copy_uart_terminal {
	echo "copy uart_terminal on server"
	sshpass -p $my_passwd scp -r "${ProNoC_HOME}/src_c/jtag/uart_xsct_terminal" "$my_server:mpsoc/"
	sshpass -p $my_passwd scp -r "${ProNoC_HOME}/src_c/jtag/jtag_xilinx_xsct" "$my_server:mpsoc/"
 
}
 
 
function copy_board_files {
	echo "copy board files"
	sshpass -p $my_passwd scp -r "$PRONOC_WORK/toolchain/board_files" "$my_server:mpsoc/"
	# update  board_part_repo_paths manulay in $my_server:mpsoc/$remote_folder/board_property.tcl file with new addr:    " /mnt/SSD-2TB/alireza/mpsoc/board_files "
}
 
 
function update_jtag_xilinx_xsct {
	# should be run inside the server
	cd ~/mpsoc/jtag_xilinx_xsct/; make
	cp ~/mpsoc/jtag_xilinx_xsct/jtag_xilinx_xsct ~/toolchain/bin/
	cd ~/mpsoc/uart_xsct_terminal/; make
    cp ~/mpsoc/uart_xsct_terminal/uart ~/toolchain/bin/
}
 
#should be run in server folder
function compile_vivado {       
	vivado -mode tcl -source make_project.tcl
}
 
function program_fpga {
    cd ~/mpsoc/kc07_mesh6/
	vivado  -mode tcl -source program_board.tcl
}
 
 
function run_uart {
	cd ~/toolchain/bin
	./uart -a 2 -b 36 -t 3 -n 126,125,124,123,122,121,120,119,118,117,116,115
 
}
 
function program_cpus {
	 cd ~/mpsoc/kc07_mesh12/sw
 
}
 
 
function copy_back_from_server {
	echo "copy back xilinx_compile to $source_path"
	sshpass -p $my_passwd scp -r  "$my_server:mpsoc/$remote_folder/xilinx_compile/*"  "$source_path/xilinx_compile/"
}
 
copy_sources_all
 
 
# copy_board_files
 
#copy_back_from_server
 
#copy_uart_terminal
 
#copy_sources_sw