URL
https://opencores.org/ocsvn/an-fpga-implementation-of-low-latency-noc-based-mpsoc/an-fpga-implementation-of-low-latency-noc-based-mpsoc/trunk
Subversion Repositories an-fpga-implementation-of-low-latency-noc-based-mpsoc
[/] [an-fpga-implementation-of-low-latency-noc-based-mpsoc/] [trunk/] [mpsoc/] [src_processor/] [new_lm32/] [rtl/] [lm32_include.v] - Rev 48
Compare with Previous | Blame | View Log
// ================================================================== // >>>>>>>>>>>>>>>>>>>>>>> COPYRIGHT NOTICE <<<<<<<<<<<<<<<<<<<<<<<<< // ------------------------------------------------------------------ // Copyright (c) 2006-2011 by Lattice Semiconductor Corporation // ALL RIGHTS RESERVED // ------------------------------------------------------------------ // // IMPORTANT: THIS FILE IS AUTO-GENERATED BY THE LATTICEMICO SYSTEM. // // Permission: // // Lattice Semiconductor grants permission to use this code // pursuant to the terms of the Lattice Semiconductor Corporation // Open Source License Agreement. // // Disclaimer: // // Lattice Semiconductor provides no warranty regarding the use or // functionality of this code. It is the user's responsibility to // verify the user's design for consistency and functionality through // the use of formal verification methods. // // -------------------------------------------------------------------- // // Lattice Semiconductor Corporation // 5555 NE Moore Court // Hillsboro, OR 97214 // U.S.A // // TEL: 1-800-Lattice (USA and Canada) // 503-286-8001 (other locations) // // web: http://www.latticesemi.com/ // email: techsupport@latticesemi.com // // -------------------------------------------------------------------- // FILE DETAILS // Project : LatticeMico32 // File : lm32_include.v // Title : CPU global macros // Version : 6.1.17 // : Initial Release // Version : 7.0SP2, 3.0 // : No Change // Version : 3.1 // : No Change // Version : 3.2 // : No Change // Version : 3.3 // : Support for extended configuration register // ============================================================================= `ifdef LM32_INCLUDE_V `else `define LM32_INCLUDE_V // // Common configuration options // `include "lm32_config.v" // // End of common configuration options // `ifdef TRUE `else `define TRUE 1'b1 `define FALSE 1'b0 `define TRUE_N 1'b0 `define FALSE_N 1'b1 `endif // Wishbone configuration `define CFG_IWB_ENABLED `define CFG_DWB_ENABLED // Data-path width `define LM32_WORD_WIDTH 32 `define LM32_WORD_RNG (`LM32_WORD_WIDTH-1):0 `define LM32_SHIFT_WIDTH 5 `define LM32_SHIFT_RNG (`LM32_SHIFT_WIDTH-1):0 `define LM32_BYTE_SELECT_WIDTH 4 `define LM32_BYTE_SELECT_RNG (`LM32_BYTE_SELECT_WIDTH-1):0 // Register file size `define LM32_REGISTERS 32 `define LM32_REG_IDX_WIDTH 5 `define LM32_REG_IDX_RNG (`LM32_REG_IDX_WIDTH-1):0 // Standard register numbers `define LM32_RA_REG `LM32_REG_IDX_WIDTH'd29 `define LM32_EA_REG `LM32_REG_IDX_WIDTH'd30 `define LM32_BA_REG `LM32_REG_IDX_WIDTH'd31 // Range of Program Counter. Two LSBs are always 0. `define LM32_PC_WIDTH (`LM32_WORD_WIDTH-2) `define LM32_PC_RNG (`LM32_PC_WIDTH+2-1):2 // Range of an instruction `define LM32_INSTRUCTION_WIDTH 32 `define LM32_INSTRUCTION_RNG (`LM32_INSTRUCTION_WIDTH-1):0 // Adder operation `define LM32_ADDER_OP_ADD 1'b0 `define LM32_ADDER_OP_SUBTRACT 1'b1 // Shift direction `define LM32_SHIFT_OP_RIGHT 1'b0 `define LM32_SHIFT_OP_LEFT 1'b1 // Bus errors `define CFG_BUS_ERRORS_ENABLED // Derive macro that indicates whether we have single-stepping or not `ifdef CFG_ROM_DEBUG_ENABLED `define LM32_SINGLE_STEP_ENABLED `else `ifdef CFG_HW_DEBUG_ENABLED `define LM32_SINGLE_STEP_ENABLED `endif `endif // Derive macro that indicates whether JTAG interface is required `ifdef CFG_JTAG_UART_ENABLED `define LM32_JTAG_ENABLED `else `ifdef CFG_DEBUG_ENABLED `define LM32_JTAG_ENABLED `else `endif `endif // Derive macro that indicates whether ROM debug is required `ifdef CFG_GDBSTUB_ENABLED `define CFG_ROM_DEBUG_ENABLED `endif // Derive macro that indicates whether we have a barrel-shifter or not `ifdef CFG_PL_BARREL_SHIFT_ENABLED `define LM32_BARREL_SHIFT_ENABLED `else // CFG_PL_BARREL_SHIFT_ENABLED `ifdef CFG_MC_BARREL_SHIFT_ENABLED `define LM32_BARREL_SHIFT_ENABLED `else `define LM32_NO_BARREL_SHIFT `endif `endif // CFG_PL_BARREL_SHIFT_ENABLED // Derive macro that indicates whether we have a multiplier or not `ifdef CFG_PL_MULTIPLY_ENABLED `define LM32_MULTIPLY_ENABLED `else `ifdef CFG_MC_MULTIPLY_ENABLED `define LM32_MULTIPLY_ENABLED `endif `endif // Derive a macro that indicates whether or not the multi-cycle arithmetic unit is required `ifdef CFG_MC_DIVIDE_ENABLED `define LM32_MC_ARITHMETIC_ENABLED `endif `ifdef CFG_MC_MULTIPLY_ENABLED `define LM32_MC_ARITHMETIC_ENABLED `endif `ifdef CFG_MC_BARREL_SHIFT_ENABLED `define LM32_MC_ARITHMETIC_ENABLED `endif // Derive macro that indicates if we are using an EBR register file `ifdef CFG_EBR_POSEDGE_REGISTER_FILE `define LM32_EBR_REGISTER_FILE `endif `ifdef CFG_EBR_NEGEDGE_REGISTER_FILE `define LM32_EBR_REGISTER_FILE `endif // Revision number `define LM32_REVISION 6'h02 // Logical operations - Function encoded directly in instruction `define LM32_LOGIC_OP_RNG 3:0 // Conditions for conditional branches `define LM32_CONDITION_WIDTH 3 `define LM32_CONDITION_RNG (`LM32_CONDITION_WIDTH-1):0 `define LM32_CONDITION_E 3'b001 `define LM32_CONDITION_G 3'b010 `define LM32_CONDITION_GE 3'b011 `define LM32_CONDITION_GEU 3'b100 `define LM32_CONDITION_GU 3'b101 `define LM32_CONDITION_NE 3'b111 `define LM32_CONDITION_U1 3'b000 `define LM32_CONDITION_U2 3'b110 // Size of load or store instruction - Encoding corresponds to opcode `define LM32_SIZE_WIDTH 2 `define LM32_SIZE_RNG 1:0 `define LM32_SIZE_BYTE 2'b00 `define LM32_SIZE_HWORD 2'b11 `define LM32_SIZE_WORD 2'b10 `define LM32_ADDRESS_LSBS_WIDTH 2 // Width and range of a CSR index `ifdef CFG_MMU_ENABLED `define LM32_CSR_WIDTH 5 `else `ifdef CFG_DEBUG_ENABLED `define LM32_CSR_WIDTH 5 `else `ifdef CFG_JTAG_ENABLED `define LM32_CSR_WIDTH 4 `else `define LM32_CSR_WIDTH 3 `endif `endif `endif `define LM32_CSR_RNG (`LM32_CSR_WIDTH-1):0 // CSR indices `define LM32_CSR_IE `LM32_CSR_WIDTH'h0 `define LM32_CSR_IM `LM32_CSR_WIDTH'h1 `define LM32_CSR_IP `LM32_CSR_WIDTH'h2 `define LM32_CSR_ICC `LM32_CSR_WIDTH'h3 `define LM32_CSR_DCC `LM32_CSR_WIDTH'h4 `define LM32_CSR_CC `LM32_CSR_WIDTH'h5 `define LM32_CSR_CFG `LM32_CSR_WIDTH'h6 `define LM32_CSR_EBA `LM32_CSR_WIDTH'h7 `ifdef CFG_DEBUG_ENABLED `define LM32_CSR_DC `LM32_CSR_WIDTH'h8 `define LM32_CSR_DEBA `LM32_CSR_WIDTH'h9 `endif `define LM32_CSR_CFG2 `LM32_CSR_WIDTH'ha `ifdef CFG_JTAG_ENABLED `define LM32_CSR_JTX `LM32_CSR_WIDTH'he `define LM32_CSR_JRX `LM32_CSR_WIDTH'hf `endif `ifdef CFG_DEBUG_ENABLED `define LM32_CSR_BP0 `LM32_CSR_WIDTH'h10 `define LM32_CSR_BP1 `LM32_CSR_WIDTH'h11 `define LM32_CSR_BP2 `LM32_CSR_WIDTH'h12 `define LM32_CSR_BP3 `LM32_CSR_WIDTH'h13 `define LM32_CSR_WP0 `LM32_CSR_WIDTH'h18 `define LM32_CSR_WP1 `LM32_CSR_WIDTH'h19 `define LM32_CSR_WP2 `LM32_CSR_WIDTH'h1a `define LM32_CSR_WP3 `LM32_CSR_WIDTH'h1b `endif `ifdef CFG_MMU_ENABLED `define LM32_CSR_PSW `LM32_CSR_WIDTH'h1d `define LM32_CSR_TLBVADDR `LM32_CSR_WIDTH'h1e `define LM32_CSR_TLBPADDR `LM32_CSR_WIDTH'h1f // write only `define LM32_CSR_TLBBADVADDR `LM32_CSR_WIDTH'h1f // read only `endif // Values for WPC CSR `define LM32_WPC_C_RNG 1:0 `define LM32_WPC_C_DISABLED 2'b00 `define LM32_WPC_C_READ 2'b01 `define LM32_WPC_C_WRITE 2'b10 `define LM32_WPC_C_READ_WRITE 2'b11 // TLB operation codes `define LM32_TLB_OP_RNG 2:1 `define LM32_TLB_OP_NOOP 2'h0 `define LM32_TLB_OP_FLUSH 2'h1 `define LM32_TLB_OP_INVALIDATE 2'h2 // Exception IDs `define LM32_EID_WIDTH 4 `define LM32_EID_RNG (`LM32_EID_WIDTH-1):0 `define LM32_EID_RESET `LM32_EID_WIDTH'h0 `define LM32_EID_BREAKPOINT `LM32_EID_WIDTH'h1 `define LM32_EID_INST_BUS_ERROR `LM32_EID_WIDTH'h2 `define LM32_EID_WATCHPOINT `LM32_EID_WIDTH'h3 `define LM32_EID_DATA_BUS_ERROR `LM32_EID_WIDTH'h4 `define LM32_EID_DIVIDE_BY_ZERO `LM32_EID_WIDTH'h5 `define LM32_EID_INTERRUPT `LM32_EID_WIDTH'h6 `define LM32_EID_SCALL `LM32_EID_WIDTH'h7 `define LM32_EID_ITLB_MISS `LM32_EID_WIDTH'h8 `define LM32_EID_DTLB_MISS `LM32_EID_WIDTH'h9 `define LM32_EID_DTLB_FAULT `LM32_EID_WIDTH'ha `define LM32_EID_PRIVILEGE `LM32_EID_WIDTH'hb // Exception Base Address `define LM32_EBA_WIDTH (`LM32_PC_WIDTH-`LM32_EID_WIDTH-3) `define LM32_EBA_RNG (`LM32_PC_WIDTH+2-1):(`LM32_EID_WIDTH+3+2) // Pipeline result selection mux controls `define LM32_D_RESULT_SEL_0_RNG 0:0 `define LM32_D_RESULT_SEL_0_REG_0 1'b0 `define LM32_D_RESULT_SEL_0_NEXT_PC 1'b1 `define LM32_D_RESULT_SEL_1_RNG 1:0 `define LM32_D_RESULT_SEL_1_ZERO 2'b00 `define LM32_D_RESULT_SEL_1_REG_1 2'b01 `define LM32_D_RESULT_SEL_1_IMMEDIATE 2'b10 `define LM32_USER_OPCODE_WIDTH 11 `define LM32_USER_OPCODE_RNG (`LM32_USER_OPCODE_WIDTH-1):0 // Derive a macro to indicate if either of the caches are implemented `ifdef CFG_ICACHE_ENABLED `define LM32_CACHE_ENABLED `else `ifdef CFG_DCACHE_ENABLED `define LM32_CACHE_ENABLED `endif `endif ///////////////////////////////////////////////////// // Interrupts ///////////////////////////////////////////////////// // Always enable interrupts `define CFG_INTERRUPTS_ENABLED // Currently this is fixed to 32 and should not be changed `define CFG_INTERRUPTS 32 `define LM32_INTERRUPT_WIDTH `CFG_INTERRUPTS `define LM32_INTERRUPT_RNG (`LM32_INTERRUPT_WIDTH-1):0 ///////////////////////////////////////////////////// // General ///////////////////////////////////////////////////// // Sub-word range types `define LM32_BYTE_WIDTH 8 `define LM32_BYTE_RNG 7:0 `define LM32_HWORD_WIDTH 16 `define LM32_HWORD_RNG 15:0 // Word sub-byte indicies `define LM32_BYTE_0_RNG 7:0 `define LM32_BYTE_1_RNG 15:8 `define LM32_BYTE_2_RNG 23:16 `define LM32_BYTE_3_RNG 31:24 // Word sub-halfword indices `define LM32_HWORD_0_RNG 15:0 `define LM32_HWORD_1_RNG 31:16 // Use a synchronous reset `define CFG_RESET_SENSITIVITY // Wishbone defines // Refer to Wishbone System-on-Chip Interconnection Architecture // These should probably be moved to a Wishbone common file // Wishbone cycle types `define LM32_CTYPE_WIDTH 3 `define LM32_CTYPE_RNG (`LM32_CTYPE_WIDTH-1):0 `define LM32_CTYPE_CLASSIC 3'b000 `define LM32_CTYPE_CONSTANT 3'b001 `define LM32_CTYPE_INCREMENTING 3'b010 `define LM32_CTYPE_END 3'b111 // Wishbone burst types `define LM32_BTYPE_WIDTH 2 `define LM32_BTYPE_RNG (`LM32_BTYPE_WIDTH-1):0 `define LM32_BTYPE_LINEAR 2'b00 `define LM32_BTYPE_4_BEAT 2'b01 `define LM32_BTYPE_8_BEAT 2'b10 `define LM32_BTYPE_16_BEAT 2'b11 `endif