Subversion Repositories ao486

/////////////////////////////////////////////////////////////////////////
// $Id: apic.h 11404 2012-09-06 15:21:08Z sshwarts $
/////////////////////////////////////////////////////////////////////////
//
//  Copyright (c) 2002-2012 Zwane Mwaikambo, Stanislav Shwartsman
//
//  This library is free software; you can redistribute it and/or
//  modify it under the terms of the GNU Lesser General Public
//  License as published by the Free Software Foundation; either
//  version 2 of the License, or (at your option) any later version.
//
//  This library is distributed in the hope that it will be useful,
//  but WITHOUT ANY WARRANTY; without even the implied warranty of
//  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
//  Lesser General Public License for more details.
//
//  You should have received a copy of the GNU Lesser General Public
//  License along with this library; if not, write to the Free Software
//  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
//
/////////////////////////////////////////////////////////////////////////
 
#ifndef BX_CPU_APIC_H
#define BX_CPU_APIC_H 1
 
#if BX_SUPPORT_APIC
 
#define APIC_LEVEL_TRIGGERED	1
#define APIC_EDGE_TRIGGERED	0
 
#define BX_LAPIC_BASE_ADDR  0xfee00000  // default Local APIC address
#define BX_NUM_LOCAL_APICS  BX_SMP_PROCESSORS
#define BX_LAPIC_MAX_INTS   256
 
#define BX_APIC_GLOBALLY_DISABLED 0
#define BX_APIC_STATE_INVALID     1
#define BX_APIC_XAPIC_MODE        2
#define BX_APIC_X2APIC_MODE       3
 
#define BX_XAPIC_EXT_SUPPORT_IER  (1 << 0)
#define BX_XAPIC_EXT_SUPPORT_SEOI (1 << 1)
 
typedef Bit32u apic_dest_t; /* same definition in ioapic.h */
 
// local apic registers
 
#define BX_LAPIC_ID                   0x020
#define BX_LAPIC_VERSION              0x030
#define BX_LAPIC_TPR                  0x080
#define BX_LAPIC_ARBITRATION_PRIORITY 0x090
#define BX_LAPIC_PPR                  0x0A0
#define BX_LAPIC_EOI                  0x0B0
#define BX_LAPIC_RRD                  0x0C0
#define BX_LAPIC_LDR                  0x0D0
#define BX_LAPIC_DESTINATION_FORMAT   0x0E0
#define BX_LAPIC_SPURIOUS_VECTOR      0x0F0
#define BX_LAPIC_ISR1                 0x100
#define BX_LAPIC_ISR2                 0x110
#define BX_LAPIC_ISR3                 0x120
#define BX_LAPIC_ISR4                 0x130
#define BX_LAPIC_ISR5                 0x140
#define BX_LAPIC_ISR6                 0x150
#define BX_LAPIC_ISR7                 0x160
#define BX_LAPIC_ISR8                 0x170
#define BX_LAPIC_TMR1                 0x180
#define BX_LAPIC_TMR2                 0x190
#define BX_LAPIC_TMR3                 0x1A0
#define BX_LAPIC_TMR4                 0x1B0
#define BX_LAPIC_TMR5                 0x1C0
#define BX_LAPIC_TMR6                 0x1D0
#define BX_LAPIC_TMR7                 0x1E0
#define BX_LAPIC_TMR8                 0x1F0
#define BX_LAPIC_IRR1                 0x200
#define BX_LAPIC_IRR2                 0x210
#define BX_LAPIC_IRR3                 0x220
#define BX_LAPIC_IRR4                 0x230
#define BX_LAPIC_IRR5                 0x240
#define BX_LAPIC_IRR6                 0x250
#define BX_LAPIC_IRR7                 0x260
#define BX_LAPIC_IRR8                 0x270
#define BX_LAPIC_ESR                  0x280
#define BX_LAPIC_LVT_CMCI             0x2F0
#define BX_LAPIC_ICR_LO               0x300
#define BX_LAPIC_ICR_HI               0x310
#define BX_LAPIC_LVT_TIMER            0x320
#define BX_LAPIC_LVT_THERMAL          0x330
#define BX_LAPIC_LVT_PERFMON          0x340
#define BX_LAPIC_LVT_LINT0            0x350
#define BX_LAPIC_LVT_LINT1            0x360
#define BX_LAPIC_LVT_ERROR            0x370
#define BX_LAPIC_TIMER_INITIAL_COUNT  0x380
#define BX_LAPIC_TIMER_CURRENT_COUNT  0x390
#define BX_LAPIC_TIMER_DIVIDE_CFG     0x3E0
#define BX_LAPIC_SELF_IPI             0x3F0
 
// extended AMD 
#define BX_LAPIC_EXT_APIC_FEATURE     0x400
#define BX_LAPIC_EXT_APIC_CONTROL     0x410
#define BX_LAPIC_SPECIFIC_EOI         0x420
#define BX_LAPIC_IER1                 0x480
#define BX_LAPIC_IER2                 0x490
#define BX_LAPIC_IER3                 0x4A0
#define BX_LAPIC_IER4                 0x4B0
#define BX_LAPIC_IER5                 0x4C0
#define BX_LAPIC_IER6                 0x4D0
#define BX_LAPIC_IER7                 0x4E0
#define BX_LAPIC_IER8                 0x4F0
 
class BOCHSAPI bx_local_apic_c : public logfunctions
{
  bx_phy_address base_addr;
  unsigned mode;
  bx_bool xapic;
#if BX_CPU_LEVEL >= 6
  Bit32u xapic_ext;             // enabled extended XAPIC features
#endif
  Bit32u apic_id;               //  4 bit in legacy mode, 8 bit in XAPIC mode
                                // 32 bit in X2APIC mode
  Bit32u apic_version_id;
 
  bx_bool software_enabled;
  Bit8u  spurious_vector;
  bx_bool focus_disable;
 
  Bit32u task_priority;         // Task priority (TPR)
  Bit32u ldr;                   // Logical destination (LDR)
  Bit32u dest_format;           // Destination format (DFR)
 
  // ISR=in-service register. When an IRR bit is cleared, the corresponding
  // bit in ISR is set.
  Bit8u isr[BX_LAPIC_MAX_INTS];
  // TMR=trigger mode register.  Cleared for edge-triggered interrupts
  // and set for level-triggered interrupts. If set, local APIC must send
  // EOI message to all other APICs.
  Bit8u tmr[BX_LAPIC_MAX_INTS];
  // IRR=interrupt request register. When an interrupt is triggered by
  // the I/O APIC or another processor, it sets a bit in irr. The bit is
  // cleared when the interrupt is acknowledged by the processor.
  Bit8u irr[BX_LAPIC_MAX_INTS];
#if BX_CPU_LEVEL >= 6
  // IER=interrupt enable register. Only vectors that are enabled in IER
  // participare in APIC's computation of highest priority pending interrupt.
  Bit8u ier[BX_LAPIC_MAX_INTS];
#endif
 
#define APIC_ERR_ILLEGAL_ADDR    0x80
#define APIC_ERR_RX_ILLEGAL_VEC  0x40
#define APIC_ERR_TX_ILLEGAL_VEC  0x20
#define X2APIC_ERR_REDIRECTIBLE_IPI 0x08
#define APIC_ERR_RX_ACCEPT_ERR   0x08
#define APIC_ERR_TX_ACCEPT_ERR   0x04
#define APIC_ERR_RX_CHECKSUM     0x02
#define APIC_ERR_TX_CHECKSUM     0x01
 
  // Error status Register (ESR)
  Bit32u error_status, shadow_error_status;
 
  Bit32u icr_hi;                // Interrupt command register (ICR)
  Bit32u icr_lo;
 
#define APIC_LVT_ENTRIES 6
  Bit32u lvt[APIC_LVT_ENTRIES];
#define APIC_LVT_TIMER   0
#define APIC_LVT_THERMAL 1
#define APIC_LVT_PERFMON 2
#define APIC_LVT_LINT0   3
#define APIC_LVT_LINT1   4
#define APIC_LVT_ERROR   5
 
  Bit32u timer_initial;         // Initial timer count (in order to reload periodic timer)
  Bit32u timer_current;         // Current timer count
  Bit64u ticksInitial;          // Timer value when it started to count, also holds TSC-Deadline value
 
  Bit32u timer_divconf;         // Timer divide configuration register
  Bit32u timer_divide_factor;
 
  // Internal timer state, not accessible from bus
  bx_bool timer_active;
  int timer_handle;
 
/* APIC delivery modes */
#define APIC_DM_FIXED	0
#define APIC_DM_LOWPRI	1
#define APIC_DM_SMI	2
/* RESERVED		3 */
#define APIC_DM_NMI	4
#define APIC_DM_INIT	5
#define APIC_DM_SIPI	6
#define APIC_DM_EXTINT	7
 
#if BX_SUPPORT_VMX >= 2
  int vmx_timer_handle;
  Bit32u vmx_preemption_timer_value;
  Bit64u vmx_preemption_timer_initial;    //The value of system tick when set the timer (absolute value)
  Bit64u vmx_preemption_timer_fire;       //The value of system tick when fire the exception (absolute value)
  Bit32u vmx_preemption_timer_rate;       //rate stated in MSR_VMX_MISC
  bx_bool vmx_timer_active;
#endif 
 
  BX_CPU_C *cpu;
 
public:
  bx_bool INTR;
  bx_local_apic_c(BX_CPU_C *cpu, unsigned id);
 ~bx_local_apic_c() { }
  void reset(unsigned type);
  bx_phy_address get_base(void) const { return base_addr; }
  void set_base(bx_phy_address newbase);
  Bit32u get_id() const { return apic_id; }
  bx_bool is_xapic() const { return xapic; }
  bx_bool is_selected(bx_phy_address addr);
  void read(bx_phy_address addr, void *data, unsigned len);
  void write(bx_phy_address addr, void *data, unsigned len);
  void write_aligned(bx_phy_address addr, Bit32u data);
  Bit32u read_aligned(bx_phy_address address);
#if BX_CPU_LEVEL >= 6
  bx_bool read_x2apic(unsigned index, Bit64u *msr);
  bx_bool write_x2apic(unsigned index, Bit32u msr_hi, Bit32u msr_lo);
#endif
  // on local APIC, trigger means raise the CPU's INTR line. For now
  // I also have to raise pc_system.INTR but that should be replaced
  // with the cpu-specific INTR signals.
  void trigger_irq(Bit8u vector, unsigned trigger_mode, bx_bool bypass_irr_isr = 0);
  void untrigger_irq(Bit8u vector, unsigned trigger_mode);
  Bit8u acknowledge_int(void);  // only the local CPU should call this
  int highest_priority_int(Bit8u *array);
  void receive_EOI(Bit32u value);
  void send_ipi(apic_dest_t dest, Bit32u lo_cmd);
  void write_spurious_interrupt_register(Bit32u value);
  void service_local_apic(void);
  void print_status(void);
  bx_bool match_logical_addr(apic_dest_t address);
  bx_bool deliver(Bit8u vector, Bit8u delivery_mode, Bit8u trig_mode);
  Bit8u get_tpr(void) { return task_priority; }
  void  set_tpr(Bit8u tpr);
  Bit8u get_ppr(void);
  Bit8u get_apr(void);
  bx_bool is_focus(Bit8u vector);
  void set_lvt_entry(unsigned apic_reg, Bit32u val);
 
  static void periodic_smf(void *);
  void periodic(void);
  void set_divide_configuration(Bit32u value);
  void set_initial_timer_count(Bit32u value);
  Bit32u get_current_timer_count(void);
 
#if BX_CPU_LEVEL >= 6
  Bit64u get_tsc_deadline(void);
  void set_tsc_deadline(Bit64u value);
  void receive_SEOI(Bit8u vec);
  void enable_xapic_extensions(void);
#endif
 
  void startup_msg(Bit8u vector);
  void register_state(bx_param_c *parent);
#if BX_SUPPORT_VMX >= 2
  Bit32u read_vmx_preemption_timer(void);
  void set_vmx_preemption_timer(Bit32u value);
  void deactivate_vmx_preemption_timer(void);
  static void vmx_preemption_timer_expired(void *);
#endif  
};
 
int apic_bus_deliver_lowest_priority(Bit8u vector, apic_dest_t dest, bx_bool trig_mode, bx_bool broadcast);
BOCHSAPI_MSVCONLY int apic_bus_deliver_interrupt(Bit8u vector, apic_dest_t dest, Bit8u delivery_mode, bx_bool logical_dest, bx_bool level, bx_bool trig_mode);
int apic_bus_broadcast_interrupt(Bit8u vector, Bit8u delivery_mode, bx_bool trig_mode, int exclude_cpu);
 
#endif // if BX_SUPPORT_APIC
 
#endif